My iPhone although i use iCloud to synchronize. does anyone have en idea what can be done?
i've been on lion for a week now, only to discover that ical on my mac book pro only showa a fraction of the appointments i've entered on my iPhone although i use iCloud to synchronize. does anyone have en idea what can be done
Try posting this in the iPhone and iCloud forums as well and you will probably get more response from users of those programs.
Good Luck
Pete
Similar Messages
-
This afternoon I was used my iPhone 3G. I then put it aside (it was left on) for about an hour. When I went to use it again, nothing happens. The home button will not call up the lock screen. The lock button will not turn the phone on, off, or lock it. When I plug it into iTunes, it recognizes it to sync. Also if someone tries to call me it will ring on their end, but nothing on my end.
The iPhone is over two years old (purchased in April 2009), so it is out of warranty. Also, everything is up to date on the iPhone.
Does anyone have any idea what the issue might be?
Thank you in advance.
ShannonWhat iPhone do you have? You can check in settings>>general>> about.
If you have a 3G you cannot update beyond iOS 4.2.1. The 3G is over 4 years old an was discontinued over 2 1/2 years ago. You need the latest ios to run the latest versions of some apps. If you have a 3GS you can update.
If your phone is not responding, reset it by pressing and holding down both the home button ad lock/ sleep button simultaneously until the Apple logo appears. -
Does anyone have an idea what may be wrong with my iphone 4S?
My iphone 4S has started turning itself off completely. When I power it back up, it allows me to log in my code and when I push the enter button it turns itself completely off again. I am trying to decide if it can be fixed or should I just buy a new iphone? This AM it is working just fine??????
If anyone knows or has a guess as to what is wrong with it, I would appreciate your input.Restore your phone, as described here:
http://support.apple.com/kb/ht1414
DO NOT restore from backup, rather sync your content back to your phone. If doing this doesn't fix things, you most likely have a hardware issue. -
my girlfriend was using her phone then it come up with no service so she turned it off and on again and then it come up in recovery mode so she tried to restore it on itunes and now it has error (-1) please help !!!!!!!!!!!!!!!
Quite a few people do. Did you try this?
iTunes error (-1) -
I cannot see my Iphone 4 in my device window in the finder anymore. It use to appear so I could copy the camera pictures off of it and transfer them to other folders. Does anyone have and idea how to get it back when you plug it in initially. Thanks
You will want to open iPhoto, go to the iPhoto menu and select Preferences. Under the General tab, next to Connecting camera opens: select iPhoto. Close the preferences and quit iPhoto. Reconnect your iPhone 4. iPhoto should open automatically and offer to import your pictures. Import them and then do what you want with them.
Best of luck. -
I have changed my account to SIM only and when I put my new SIM Card into my iPhone 4 it just says 'no service' in the top left corner, also iMessage has stopped working too. I can only use my phone on my WiFi at the moment, does anyone have any idea?
I already have, I contacted Orange yesterday and they said I will receive a text to confirm the registrastion for my new SIM Card, they said the text would arrive between 2 and 24 hours and its been over 24 hours with no text recieved
-
How do I remove an email address that is no longer vaild for the iTunes Store or my iPhone? A really old email address keeps popping up on my iPhone, the email address is not valid and I have no idea what the password was. It's been over two years.
Hello tcnolen1,
It sounds like you are trying to change the Apple ID logged into the iTunes & App Stores on your iPhone. Use these steps:
Changing your Apple ID account
Tap Settings > iTunes & App Stores, then tap the Apple ID signed in.
Sign out of the current Apple ID account and then sign in with another account or create a new Apple ID.
You can find the full article here:
iOS: Changing the signed-in iTunes Store Apple ID account
http://support.apple.com/kb/ht1311
Thank you for using Apple Support Communities.
Best,
Sheila M. -
I have installed a trial of Adobe illustrator on my macbook pro. It is the 2014 release of adobe illustrator. I want to trace an image using the custom trace button.
I start a new document. Then I place my scanned pencil/colored pencil drawing, in to the document. I have tried scanning and then placing it as a jpeg, bitmap, and tiff file. I have tried scanning and then placing it, in color and in black and white. The scan mode I use is flatbed. Adobe illustrator allows me to select the default button and one of eleven preset buttons (e.g high fidelity photo), but it does not allow me to click the custom trace button. The custom trace button is grey while all the other buttons are white.
Does anyone have any ideas how I could custom trace?It seems pointless to adjust it afterwards because it is then only a couple a pencil lines rather then a full drawing. And how do I adjust it afterwards? Would I do this using the different buttons under the window button?
-
I am using Logic Pro 9 with two MXL 990 microphones in my piano and a Rode NT1A for vocals. I have tried recording with added reverb and keeping getting not a natural reverb sound, but a rather "pixilated" one that does not sound natural. Does anyone have any ideas on how to solve this issue? I have tried using Silververb and Space Designer, and both result in the same problems. Thank you!
This is asking for the impossible! It does not sound natural because maybe it isn't and in judging so whats your reference anyway. If you are in dire need of some natural sounding room you can go and record it yourself. But even then, the chances that it sounds like you imagined it, are very slim.
There are very decent sounding reverberation plugins, based on artificial reverb generators or convolution-style, the last one is said to sound more 'natural' then the first one. Be it as it maybe, it really is like cooking food. You got all the ingredients for this delicious taste at hand and believe it or not to reach a satisfying result this is not enough, because if you do not mix the ingredients in the right proportion you will end up with a different dish you thought you'll get. This is exactly the same when one would mix audio, I dare say.
So treat yourself to some good ingredients and the rest is up to you, namely: taste and experience!
And looking at some of my past music productions I always find the same plugins for the 'ambient' task:
Altiverb by Audio Ease when I have acoustic ensembles (classical music mostly), the Sony Oxford Reverb in studio productions, Bricasti when I have to deal with drums and MMultiBandReverb from MeldaProduction for all-round stuff. Thats the base I start from, after that I can end up with dozen Reverb plugins which basically all are doing the same thing but just in a tiny different way. -
ipad2 plus ipad air all of a sudden instantly goes back to home screen.doesnt matter what app i am using just when it decides to do it it does.apple tech has no answer or fix for me does anybody have any idea what is wrong
First thing to try is to reset your device. Press and hold the Home and Sleep buttons simultaneously until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.
Could also be not enough free space for the iPad to operate efficiently. With iOS 7 it is recommended that you have 15-20% of the storage space on the device free. For a 16 GB device that is 2.4-3.2 GB free. For a 32 GB device that is 4.8-6.4 GB free. For a 64 GB device that is 9.6-12.8 GB free.
If neither of these suggestions helps, Make an appointment at an Apple Store to have your device examined by a technician. Or contact Apple Support. -
I am unable to sync all my selected songs to my iphone. The error message is that the computer is not authorized. However, I have authorized the computer and iTunes confirms that. Any ideas what can be done to fix this. My phone is an iPhone 4S.
Were some of the songs purchased from a different itunes account?
-
I am trying to enter the No. Of my VISA card (which I normaly use for payments) in the billing info of my account and it is not accepted. Does anyone have any idea why?
JarleEkanger wrote:
How about this? Use Delete array subset to extract chunks for averaging, and a shift register to retain the remaining array.
It is typically not advisable to use "delete from array" in a tight loop. The constant memory reallocations due to array resizing are probably inefficient.
Here's one simple way to do it..
(If the number of points is not divisible by 10, the excess tail is discarded. You can easily modify that behavior if desired.)
LabVIEW Champion . Do more with less code and in less time .
Attachments:
averages of 10.png 5 KB
averages of 10.vi 9 KB -
In my email all the messages from one person bunch together and I would like to separate them. I have done this before on my iPhone but just recently got an iPad and its doing it on this, so does anyone have any ideas how to fix this issue?
Settings >> Mail, Contacts. Calendars >> Organise by Thread. Switch to OFF to see every individual email in the Inbox.
-
I copied several MOV files to a CD. When I play them from the CD the video is fine but the audio works fine for the first few seconds then stops (using Qicktime Player 7.7.1. Everything works fine if I use VLC Media Player. Does anyone have any idea why?
My purpose for copying to a CD or DVD is so that I can make copies and send to friends and relatives. What is the best way to get these files on a CD/DVD with the right codecs?
The easiest thing to do is to simply tell your friends and relatives to copy the files to their local hard drive before playing them. Your basic problem is that data discs have a limited real time transfer rate. Since you say VLC plays the files fine, I might suspect its player is likely buffering the data while the QT 7 Player is not.
Data discs made for playback directly from the CD or DVD are normally encoded using MPEG-4/AVC (H.264) video with AAC audio. This is a modern codec which has specific settings to re-package the data (i.e., must be encoded using the multipass option and then select the "optimize for CD/DVD" option). -
Im having a problem with the dvd quality, I'm using compressor to convert the video fils from apple prores to mpeg2 .It doesn't matter how long my video is even if its just 5 minutes I'm getting cut edges/lines in the video specialy if i have titles it comes up really bad , I took the same video to a friend of mine who have PC and he uses Encore , did the encoding there and it was just fine no problems! BTW I tried using doferent setings in compressor from CBR and VBR I even pushed up the setings to 8 or 9 BR and still no luck !
does anyone have any idea ?
Thanks in advence ...Let's focus attention on just the Sony. (What model and what resolution are you shooting?)
For now, I'll assume you're shooting 1080i.
Take a representaive clip into a new sequence. Add a title.
In your sequence, make sure field dominance is set to Upper.
Set render settings to Pro Res 422.
After rendering, export QT self contained.
Import into Compressor (I'm now referring to v3.5).
Select the 90 minute Best quality DVD preset.
Open frame controls and turn on (click the gear icon). Set Resize filter to Best.
Submit burn and check quality on TV.
Good luck.
Maybe you are looking for
-
Automatic creation of PO in supplying plant
Hi , There are three plants A,B and C. Plant A procures from B and plant B procures from plant C. Note ::: A cannot procure from C due to some financial matters. i.e, A<B<C . A plant to plant purchase order will be created in plant A for plant B. Thu
-
I have an ipod classic and I can not put the muisc on my ipod classic from an external hard drive
I have a PC, and all my music is on the external hard drive. My ipod will not sync. At the present time I have nothing on my ipod classic. I want to put the music on my ipod and keep the music on the external hard drive. When I open itunes I see
-
How do I collect my free Lifecycle Designer for upgrading to Acrobat XI?
Just had an hour long run-a-round with customer support over this ... Important P.S. for LiveCycle Designer Users! You've probably already heard that LiveCycle Designer will no longer be shipping with Acrobat XI. But don't panic. For those of you who
-
Warning while loading example VIs for XPS motion controller
Hi, I'm new to Labview. I want to control the XPS motion controller using Labview and I wanted to get started with the examples provided by XPS along with the drivers. But I get a warning while loading the example. I have attached a screenshot of it.
-
Downladed ituens 7 but unknown error -200 pops up when i click on it?
I downloaded itunes 7 recently but when i click on it it comes up with "unknown error occured -200". What can i do to prevent this and enter itunes?