My iphone4 cannot open on screen it show usb and itunes logo...needed help urgently thanks

suddenly my phone cannot open on the screen it just show usb and itunes logo only... needed help and solutions urgently thanks a lot

Error 1603
Follow the steps listed below for Error 1604. Also, discard the .ipsw file, open iTunes and attempt to download the update again. See the steps under Advanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations.If you do not want to remove the IPSW in the original user, try restoring in a new administrator user. If the issue remains, Eliminate third-party security software conflicts.
Error 1604
This error is often related to USB timing. Try changing USB ports, using a different dock connector to USB cable, and other available USB troubleshooting steps (troubleshooting USB connections. If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode,put it into Recovery Mode.
Restore and wait for the error.
When prompted, click OK.
Close and reopen iTunes while the device remains connected.
The device should now be recognized in Recovery Mode again.
Try to restore again.
If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.

Similar Messages

  • How to restore iphoneif it shows usb and itunes logo

    how to restore iphone showing usb and itunes logo

    Hi nirajan,
    Thanks for visiting Apple Support Communities.
    This article addresses what to do if you only see the "connect to iTunes" screen:
    iOS: Unable to update or restore
    http://support.apple.com/kb/ht1808
    Cheers,
    Jeremy

  • TS1538 Iphone5 not recognized by Itunes, only shows USB and Itunes logo

    I have tried all items listed my Apple. Will turn on and off but only shows itunes logo and usb. Not recognized by Itunes. Have been thru ALL items listed. Phone is less than a month old

    Yes, we tried that, tried everything listed in the troubleshooting sections. Even checked pc with itunes. Took it to Applestore and they fixed it. I have no idea what they did but it's fixed and was free.

  • I was updating my iphone 3gs and when i came back to check on it, all i had on the screen was a usb and itunes logo.  error -1. now my phone won't work. what do i do?

    I have a iphone 3gs and while trying to update tot the new software my phone gave error -1 and went to usb and itunes logo page and says it is in recovery mode. I have tried to get it out of this mode but have had no luck. My iphone is not jailbroken, so i don't know why this is happening.

    The device is in recovery mode. Connect it to iTunes and the computer and you need to restore it.

  • HT1414 i am unable to restore my iphone 4s " screen showing USB cable arrow showing to connect to iTunes" when i connect to itunes it after asking restore starts (step 3) updating itunes with no effect to screen which is still showing usb and itunes symbo

    i am unable to restore my iphone 4s " screen showing USB cable arrow showing to connect to iTunes" when i connect to itunes it after asking restore (step 3 without going to step 4) starts updating itunes with no effect to screen which is still showing usb and itunes symbols

    See Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...
    Be sure to Follow ALL the Steps...
    But... if the Device has been Modified... this will Not necessarily work.

  • TS3694 PlEASE HELP ME RESTORE MY IPAD 2. JUST SHOWING USB AND ITUNES SYMBOL TO CONNECT. iPad 2, iOS 7.0.2, fix it

    PlEASE HELP ME RESTORE MY IPAD 2. JUST SHOWING USB AND ITUNES SYMBOL TO CONNECT.
    iPad 2, iOS 7.0.2, fix it

    1: Connect the device to Your computer and open iTunes.
    2: If the device appears in iTunes, select and click Restore on the Summary pane.
    Restoring  >  http://support.apple.com/kb/HT1414
    3: If the device doesn't appear in iTunes, try using the Steps in this article to force the device into Recovery Mode.
    Make sure you have the Latest Version of iTunes (v11.1.5) Installed on your computer
    iTunes free download from www.itunes.com/download
    Note on Recovery Mode.
    You may need to try this More than Once... Be sure to Follow ALL the Steps...
    Once you have Recovered your Device...
    Re-Sync your Content or Restore from the most Recent Backup...
    Restore from Backup  >  http://support.apple.com/kb/ht1766

  • HT201210 my 3gs stays on the screen with the usb and itunes picture on it. when i restore the phone on itunes it give me (-1) code. what shoud i do?

    my 3gs stays on the screen with the usb and itunes picture on it. when i restore the phone on itunes it give me (-1) code. what shoud i do?

    You could try restoring and staying away from that backup.  I've had that happen to me before on my iPhone 4 from a corrupt backup.  You could be coincidently mixing the two issues, sounds to me like you got lucky and your phone is A-OK but you may be using a corrupt backup.

  • MY Ipod is showing cord and itunes logo and not responding

    MY Ipod is showing cord and itunes logo and not responding

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • I was doing the software update when my iphone died so i pluged it in and when it turnes back on after the white apple on the screen the screen just showes the blue itunes logo over the word itunes over the picture of a charger. ive tried reseting it

    i was doing the software update to my iphone 4s and my phone died. i pluged it in and when it turned on after the white apple the screen showes the blue itunes logo over the word itunes over an image of a charger. i tried reseting my phone. i cant figure out how to get past this point

    See Here  >  http://support.apple.com/kb/HT1808

  • I just got my a new iphone 4 from O2. i plugged in my phone to my computer(windows 7). itunes doesnt open automatically. when i opened the itunes,its still not detecting my phone. on the phone it only shows the cable and itunes logo. please help

    I just got my a new iphone 4 from O2. i plugged in my phone to my computer(windows 7). itunes doesnt open automatically. when i opened the itunes,its still not detecting my phone. on the phone it only shows the cable and itunes logo. please help

    Did you try to remove all Apple related software and reinstall iTunes again? Removing iTunes, QuickTime, and other software components for Windows Vista and 7

  • IPod touch just shows picture of USB and iTunes logo with CD, won't turn on

    I can't get my iPod touch to turn on to the home page. All it does when I turn it on is I get the apple symbol for a sec and then it shows this picture of a USB cord and iTunes logo with a CD. I've tried pushing the home button and power button down together and that didn't work. And I uninstalled all iTunes stuff and reinstalled it and still nothing. Help me!

    I had to disable my wireless to get my IPOD to be recognized by ITUNES. it got stuck in that same screen you describe. another thing you can try is connecting it to another pc that has itunes and then connect it back to the original pc. you will just have to overwrite the library when you connect it back to the original.

  • ATV2 Not showing in iTunes, and bricked, showing micro usb and iTunes logos

    Hey all,
    I was given an ATV2 for christmas a few weeks early, purchased new from Big W (Australia). I happily plugged it in on the 14th or 15th December (I can't quite remember, but I did find out later itunes match went live to a bunch of countries that day, which is why my itunes account crashed). I plugged it in, with the HDMI cable I purchased from australian apple store online, and the power cable. I connected happily to my home network, and started scrolling through the features. I came to a point in setup where it asked for my itunes ID and password. I entered these and it told me it couldn't recognise the apple ID or password.
    I tried again, same. I checked my mac to see if it was iTunes or the ATV2 that had a problem... tried to log in, and it said the same error msg. Same on my iPhone and iPad. So I knew itunes was down, and later found out it crashed internationally for some people as itunes match went live.
    Unfortunately for me, as I got that first error msg, I aborted trying to set up. I then had a pop up on the ATV2 asking me to update the software (I run the latest software on my mac, ipod, ipad, and have latest itunes by the way), I can't remember which version it had, but it asked me to update, and not knowing the login issue was accross platforms, I tried to log in again and update, hoping it was more a software issue. It seemed to begin updating then pop up with the same itunes error that it couldn't recognise the apple ID or password. At this point the device suddenly showed the micro USB to itunes logo and it became apparent it wanted me to plug into itunes for some R&R. Of course I didn't have a micro usb cable, and had to wait a week or so to get one since I live in the country with no tech shops around. It arrived and I tested it on my itrip as a charging cable. It charges my iphone nicely while plugged into the griffin itrip. So the cable works. I plugged the ATV2 into my imac (latest OSX 10.7.2 and latest itunes 10.5.2) and it doesn't come up in itunes at all. I tried a different USB port in the back of the computer as opposed to the keyboard. No luck. I tried plugging in the power cord as well, no luck. I tried a reset via ATV2 remote holiding the menu and down buttons until the LED light flashes super super fast (as opposed to its current fast flashing). No luck.
    How do I get this thing to show up in itunes? Or how can I manually reboot it if it won't show? I live nowhere near a genius bar or even the shop where my family member purchased it, and they probably lost the reciept by now anyway so I doubt I could exchange.
    Very dissapointed in Apple for not including HDMI cord or micro usb with the product, not to mention it was Apple's fault itunes crashed right as I was setting up. I'm a huge Apple fan but this is so annoying.
    I have read something about router permissions and so on being a possible cause, is this likely? My ipad, iphone and mac never took issue with our wireless network or router previously, but it was setup a year ago and I have no idea what the settings are exactly. We also have two other imac's and a ibook connecting occasionally at home (big family) and no issues there.
    I have home sharing on, I did everything the manual said. HELP!

    Thanks everyone.
    Alley_Cat I tried a new micro usb, as a last ditch effort before giving up entirely... SUCCESS! How strange the other micro usb charges my iphone via griffin iTrip perfectly, but wouldn't work with apple TV. Perhaps there are different kinds? Even more bizarre than Apple not including it in the box, is that they don't even SELL micro USB's on the Apple australian online store (or at least they didn't when I checked a week ago). Now that is stupid.
    Anyway i'm mid-restore and software update now, fingers crossed!
    Also on the HDMI cable inclusion/not inclusion debate... is it actually possible to use the Apple TV for any reason without one? Because my point is more that there is no way to do anything with the thing, without the cable. Printers that don't include usb connections usually are able to connect to your computer and network wirelessly, therefore perform their intended function without the cable. My point is simply if a device is meant to do something, you buy it expecting to do that thing. I'm lucky I had googled it and knew about the HDMI not being included, but even I missed the micro USB inclusion. At the very least this should be clearly marked on the exterior packaging so you know in store, you have to buy the device + HDMI + micro USB. Isn't Apple all about making 'things just work'?

  • Just got an ipadmini. screen stuck with usb and itune motiff image?

    How to unlock ipadmini screen. Stuck with usb and itune image. Tried to turn off with sleep button and home button. No luck

    Your iPad is in recovery mode and you need to restore the device now. Take a look at this kb support article.
    http://support.apple.com/kb/ht1808

  • Bought a 2nd hand iphone4. On the screen it shows "Connect to itunes" after connecting it shows in my itunes "There is a problem with your iphone" Pls help me what to do next? Thanks

    Hi. I would really appreciate if someone could help me find a way to solve my problem. I bought a second hand iphone4 from my friend's friend. I fully trust my friend coz she said this iphone is working but it was handed to her lowbat so i get home i recharge it immediately and after charging it, i open and it shows to select language and country and i did select. After this it shows on the screen "Connect to itunes". Then i plug it in to my laptop and connect to itunes. It shows in my itunes " There is a problem with your iphone". Please visit the Service Answer Center to find answers to all your questions etc. To find your nearest Apple Store pls click here. I know i was so stupid to fully trust and paid before i check the phone. Can anybody pls help me with my problem.

    It's probably broken. Is there an error number displayed by iTunes?

  • HT201412 iphone 4 only shows usb and itunes icon on the screen...can't do anything.  help??

    my iphone 4  screen is showing only a usb plug and itunes icon cant restart or shut down...i need help please???

    I have same problem after trying to upgrad to iOS 6.1.1 :-(

Maybe you are looking for

  • OBIEE Dashboards are not visible properly in firefox

    HI all, We are trying to open our obiee dashboards in fireworx. But it didnot work properly. we are using firefox 3.0 and 2.0 version but they didnot workfor us. Any changes needs to be done in brower or in obiee. We are using java code in some repor

  • Dynamic branching - how?

    Hello, I'm stuck a little bit. I'm on Apex 4.1, Oracle 11g XE I have a page which branches to 2 different pages depending on a page item. I the item is set to A it branches to page A, if set to B it branches to page B. Now this works for buttons CANC

  • How to assign two catalogues in R3 ISA

    Hi Gurus, We have a requirement where a customer should be able to see 2 sets of products; one a global set of product ( common to all with generic pricing) and the other a specific set of products for that customer ( or the set of customers) with sp

  • BAPI to create network (T-code CJ21)

    Hi all, I was trying without success to implement the BAPI_NETWORK_MAINTAIN, to create a network. Is this the correct option, or is there a better one for this? Best Regards, Pedro

  • Application manager is missing some apps, after effects, premeire pro and others

    title says it all , is this a bug or something I need to get after effects on my machine but I cant??