My iphone4's display is blank. Pls help!!

My iphone4's display is blank. The phone is still working as I can hear emails and messages being delivered. The display is white with vertical lines running. Restarting is not possible either nor can I turn it off. Pls help!!

Hard reset Simultaneously press the sleep/wake and the home buttons for 10-15 seconds until the device reboots (ignore the shutdown screen).

Similar Messages

My home button is not working in iphone4 what should be do pls help.

My home button is not working in iphone4 what should be do pls help.

Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.
If basic troubleshooting fails to resolve the issue, the next step is to take the device to Apple or an Apple Authorized Service Provider for evaluation.
Apple does not repair devices.
iDevices are not user servicable.
Any attempt by a 3rd party to repair the device will void the warranty and all rights to support from Apple and these forums.

HT204390 my ipad screen is black and it wound come back to nomal even if i try to reboot it,and if am offing it,i see blue screen and suddle it goes back to blank.pls help me

my ipad screen just went black and wount come back to nomal even when i try rebooting it,i only see a blue screen any time i off it but after a second it goes blank again althuogh i can still hear voice over.pls help me.7

Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
Frozen or unresponsive iPad
Resolve these most common issues:
    •    Display remains black or blank
    •    Touch screen not responding
    •    Application unexpectedly closes or freezes
http://www.apple.com/support/ipad/assistant/ipad/
iPad Frozen, not responding, how to fix
http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
Black or Blank Screen on iPad or iPhone
http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
 Cheers, Tom

Large number of attributes reduces data display in Query (PLS HELP).

Dear Guru's
We have newly upgraded our system to 7.0, Currently i have a Query based on master data info object(0 equipment) which contain several attributes, due to huge number of attributes, i cannot see data for few attributes( Ex:-0service descrip), but data exists for these atrrib, when i check in RSA1. my client want to use heavy number of 0Euipment numbers(nearly 10000) in selection screen. thats the reason for data not to be seen.
WE are under SP 16 also(Note 562162 - Additional selection of attribute reduces query result set is allready exists), and did not found any proper note.
So guru's can any one please tell me how i can get the data in Query for these attribute by keeping the same selection option for Equipment numbers (10000).
Dude's give me some good suggestion please...client is waiting from 1 week
Thanks in adv
Dev
Edited by: Srinivas dev on Jun 10, 2008 11:52 AM

Dear Yogesh,
Thanks a lot dude...
I assigned points for your kindly help....
Got any idea about by initial post Large number of attributes reduces data display in Query
Thanks and Regards
Dev

My ipod display... pls help..

i brought ipod nano for a few day, now it have some problem on my ipod display.
1st day it's OK NICE!
2 NICE!
3. now ipod nano display color.. change to yellow-slightly. why?
what should i do?
unhappy ;(
anyone got this problem?
(sorry for bad english, i'm not good at gramma.)
thank you.

Bring it back to the shop that you bought your iPod. Tell them whats the problem.

Hi frnds I'm using iPhone 3gs suddenly my phone is not working as usual suddenly it say i should restore my device so i clicked restore on my pc running on windows 7 but it displays error 21 pls help as soon as possible

iPhone stuck on the "connect to iTunes " screen

Hello shravan vj,
Thank you for the details of the issue you are experiencing with your iPhone. I recommend the following steps for Error 21:
Check for hardware issues
Try to restore your iOS device two more times while connected with a cable, computer, and network you know are good. Also, confirm your security software and settings are allowing communication between your device and update servers. If you still see the alert when you update or restore, contact Apple support.
Common errors: 1, 10-47, 1002, 1011, 1012, 1014, 1000-1020.
Resolve iOS update and restore errors in iTunes
http://support.apple.com/kb/ts1275
Thank you for using Apple Support Communities.
Best,
Sheila M.

Bought a 2nd hand iphone4. On the screen it shows "Connect to itunes" after connecting it shows in my itunes "There is a problem with your iphone" Pls help me what to do next? Thanks

Hi. I would really appreciate if someone could help me find a way to solve my problem. I bought a second hand iphone4 from my friend's friend. I fully trust my friend coz she said this iphone is working but it was handed to her lowbat so i get home i recharge it immediately and after charging it, i open and it shows to select language and country and i did select. After this it shows on the screen "Connect to itunes". Then i plug it in to my laptop and connect to itunes. It shows in my itunes " There is a problem with your iphone". Please visit the Service Answer Center to find answers to all your questions etc. To find your nearest Apple Store pls click here. I know i was so stupid to fully trust and paid before i check the phone. Can anybody pls help me with my problem.

It's probably broken. Is there an error number displayed by iTunes?

Pls help... i cant turn on my iphone4 after i upgrade to ios7

pls help... i cant turn on my iphone4 after i upgrade to ios7

Reset the phone: hold down power and home buttons together until the Apple logo is displayed. No data will be lost.

Monitor didn't display, Switching to virtual console. Pls, Help me !

I'm configuring Sunfire T2000 server, I have a problem with monitor display. I haven't seen what it displays likes normal.
I saw a report error as below
/pci@7c0/pci@0/pci@8/pci@0/TSI,mko@0
Doesn't support terminal emulation mode; switching to virtual console
I have configed in OPB : output = screen
input = Keyboard
I'm using Sun XVR-200 card and Sun LCD monitor, OS solaris 10 is pre-installed.
Pls help me. I'm deploying my Project. it's very important with my customer.
Thanks so much
Edited by: olala23 on 22:31 14-11-2008

Sun patch 122472-05 should correct the issue.

Home button not working on my iphone4..pls help....

home button not working on my iphone4..pls help...

Try this:
Firstly open setting
and hold power nd home buttom until you wont reach to your homescreen!
it might fix your problem

My T40 display (lcd) suddenly turns blank, any help

My T40 display (lcd) suddenly turns blank, any help Mo
Moderator Note; please update your profile with your correct country location as per the forum rules. Products, options and services vary from market to market. Knowing your location helps us help you
Message Edited by andyP on 07-12-2008 10:01 PM

I'm afraid that you're not going to like what I'm about to write...
Your T40 has most likely become a victim of the infamous GPU failure that T4x/R5x with ATi graphics are infamous for, where the video card starts detaching itself from the motherboard as a result of heating/cooling cycles and/or physical stress on the chassis.
Re-flowing/re-balling the solder in the GPU area or motherboard replecement are your only choices.
Good luck and let us know.
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

I ,have an iphone4 16gb ,brought in uk,it does not supports the india networks ,how to unlock it ,pls help me., I ,have an iphone4 16gb ,brought in uk,it does not supports the india networks ,how to unlock it ,pls help me.

I ,have an iphone4 16gb ,brought in uk,it does not supports the india networks ,how to unlock it ,pls help me., I ,have an iphone4 16gb ,brought in uk,it does not supports the india networks ,how to unlock it ,pls help me.

Have you asked your mobile phone operator to turn on roaming for you? and if you have you will need to turn on DATA ROAMING on the iPhone by going to SETTINGS > GENERAL > MOBILE DATA and turn on DATA ROAMING. You should then be able to see the various Indian Networks listed in SETTINGS > CARRIER and be able to make/receive calls.
If you are in India and didn't ask for Roaming to be activated on your mobile account you're stuck until you return to the UK.
OR
If you have a 'locked' phone that is tied to the UK operator then you will need to find a phone shop that unlocks iPhones but beware this invalidates any Apple Warranty. If you are still in the UK then phone the mobile operator and ask then to unlock your iPhone which they usually do if its not in a contract with them or at the end of the contract period.
Hope that helps a little, Andrew

Pls help - Displaying Simplified Chinese characters

Hi all,
I am using Servlet to generate HTML.
When I use setContentType="charset=big5" and out.println(" . . . ."); with Big-5 Traditional Chinese characters, everything is fine.
However, when I use setContentType="charset=gb2312" and out.println(" . . . ."); with GB2312 Simplified Chinese characters, everything is trash with some ??????.
The internet browser in both cases can correctly set to the appropriate character set, that is, in the 1st case it is big5 and in the 2nd case it is gb2312.
Pls help

It should be because the font provided cannot handle the characters. Java only ever sprays question marks or rectangles at you if the font you're using is incapable of displaying what you're trying to show.
I'd imagine that the system's default font is capable of displaying Big5 Chinese characters quite happily if it's working on the page. The problem will come when you switch the encoding of the page and the characters within it. The same default font obviously can't display GBK stuff. So switching the font (probably through the use of <FONT face=""> tags) might do the trick.
Hope that helps!
Martin Hughes

HT1766 yesterday i connect my iPhone with iTunes then one MSG displayed on screen about backup i ignore that but same time i have lost all my installed app from my iPhone pls help me.

yesterday i connect my iPhone with iTunes then one MSG displayed on screen about backup i ignore that but same time i have lost all my installed apps incouled my pics and vids from my iPhone pls help me.

1) ensure iTunes is authorized for your iTunes store account(s)
2) connect your device and right-click or control-click it in the iTunes Source list, then choose transfer purchases from the shortcut menu that appears.
3) sync the device
iTunes will wipe the iPhone but, since you transferred your purchases in the previous step, your content will be in your library and you can re-populate the iPhone with it.
above works for purchases from the iTunes store. for everything else, check out this post by Zevoneer.

I can't update/downloads an app from app store by using by iphone 4s. The icon will change to blank keep waiting, this problem was trouble me for 1 week. pls help me.I try all the method (reset/change date setting)no help my network is ok.

I can not update/download an app from app store by using my iphone 4s. I try every method by re-setting date/time and reboot the phone etc.NO Help.
The icon will change to blank keep waiting & can not go in & use in. Anyone have solution for this. pls help me...tks

.local indicates local activity by the computer host Williams-macbook-pro.local=hostname@domain . The UID of 501 is the standard UID of a local computer administrator.
Copy and paste this little script in your terminal:
if [ "SSH_CONNECTION ]; then
echo I am remote
else
echo I am local
fi
A return of "i am local" ensures there is no remote connection to your machine (through SSH).
In the future, to avoid remote entry, I would recommend not posting your IP address though.

My iphone4's display is blank. Pls help!!

Similar Messages

Maybe you are looking for