My iPod Classic is not syncing to my Mac. When I plug it in, it tells me the servers do not support it or something along those lines. It is an iPod Classic 8g, and I bought it used for 30. Any help????

Today I bought an iPod Classic 8gb for 30 quid. When I bought it (used) of of a friends, it played music fine, I could listen to it, and it worked ok. So I go home to reset it so I can put my account on it, and sync it with all my music I have (I want to use it when I hit the gym instead of using my iPhone), but when I plugges it in and restored it, it finished the restoration but NOW it wont let me sync all of my stuff on to it, and the iPod is completely black. I restored it to Factory settings, it shouldnt be doing this???? When I plug it in , I get an error that says
"The iPod software update server could not be contacted. The server does not support this version of iTunes."
Makes me pretty ticked off, like honestly how ******* old is this ******* iPod???
Im also running version 10.9 on my MacBook Pro
Picture: http://imgur.com/nTeiJzO

Perhaps the reason you haven't had any replies is because there is no such thing as an 8GB iPod Classic.
I suggest that you begin by correctly identifying which iPod you have.
http://support.apple.com/kb/HT1353

Similar Messages

  • I am rying to un-disable my disabled 4th generation iPodTouch. It says that I need to enter the password on my iPod but my iPod is disabled and says to connect to iTunes. Any help? It won't even show up in the left sidebar. Help?? :/

    I am trying to re-able my disabled iPod. It is a 4th Generation iPod touch 8gb. It has a crack screen and the lock/sleep button and the volume buttons do not work. It says in red ribbon on the top of the screen, "iPod is disabled Connect to iTunes". When I connect it to iTunes it doesn't show up in the left sidebar. Instead a message pops up and says, "iTunes could not connect to the iPod 'Madyz iPod' because it is locked with a passcode. You must enter you passcode on the iPod before it can be used with iTunes." What do I do? I would really appreciate help.(: thanks.

    If you can't enter the passcode then you have to place the iPod in recovery mode and then restore the iPod via iTunes. For ecovery mode see:
    iPhone and iPod touch: Unable to update or restore
    Note that this requires using the sleep/wake button.  If you are not successful then there is nothing else that I know you can do.

  • Every time I try to download a game onto my phone, there's a pop-up which reads "the item requested is not available in your country" or something along those lines.  Does anyone know what the problem is and how I can fix it?

    I can download games onto my iphone 5 cause it says the items are not available in my country (south Africa) is there something I can do?

    Other than moving to a country where the apps you want are available, there is no fix.

  • I have an old Ipod 5th gen that I have been using for downloading music from my library.  Upon purchasing an Ipod touch and registering it in Itunes, I can no longer sync tunes to my old ipod.  How can I get that option back on my old ipod?

    I have an old Ipod 5th gen that I have been using for downloading music from my library.  Upon purchasing an Ipod touch and registering it in Itunes, I can no longer sync tunes to my old ipod.  How can I get that option back on my old ipod?

    - iTunes purchases by maybe
    iTunes Store: Transferring purchases from your iOS device or iPod to a computer
    - For other music you need a third-party program like one of those discussed here:
    newer copy
    BTW, this is the iPod touch forum.

  • Are the newer ipod classics (80GB and above) compatible with docks for the older ipod classics (20GB)?)

    are the newer ipod classics (80GB and above) compatible with docks for the older ipod classics (20GB)?)

    I have an iPod Touch 2 with iOS 4.2.1.  This is the highest version that works on this device.  I checked it once and it had to do with iOS 4.3 and above only supporting the higher RAM CPUs on newer devices.
    Apple does make it harder than it needs to be.  There still remain a number of apps available on iTunes that will work but they are hard to find because you must manually look at each app specs to see if the app supports an iOS below 4.3
    App backups are your friend since iTunes has no way to keep older version of apps.

  • I have iphone 4s and just bought an ebook for ibook, trouble is the font is so tiny I can't read it and the font sizer is not working? Please help!

    Hi, I have the  iphone 4s and just bought an ebook for ibook, trouble is the font is so tiny I can't read it and the font sizer is not working? Please help!

    Hello Glittergirl68,
    Thank you for using Apple Support Communities.
    It sounds like the function to reseize the Font in an iBook is not functioning properly.
    I recommend a few things here. First close all the apps that are running in the background:
    Double-click the Home button.
    Swipe left or right until you have located the app you wish to close.
    Swipe the app up to close it.
    From: iOS: Force an app to close
              http://support.apple.com/kb/ht5137
    When you have done that, restart the phone, and try again.
    If the issue persists, I would follow these steps from the article:
    iOS: Troubleshooting apps purchased from the App Store
    http://support.apple.com/kb/TS1702
    2. Check for app updates
    You can setup apps to update automatically in Settings > iTunes & App Store, but make sure that your apps are up to date:
    Open the App Store and tap Updates. If updates are available, tap Update All.
    If  prompted, enter your iTunes Store account information. App Store will then download and install the app updates.
    Note: Some apps may require a Wi-Fi connection to update.
    3. Install another app from the App Store
    If none of your user-installed apps will launch, there could be an issue with Apple ID authorization. Download and install an app that isn't already installed on your device to reset this information. You can also remove an app from your iOS device and download it again from the App Store or sync the app from your computer.Note: If you have installed apps using multiple Apple ID accounts, you may need to perform this step for each account.
    4. Restart the app
    If the issue affects only a single app, try closing just that app.
    5. Restart your device
    Turn the device off and on.
    6. Reinstall the affected app
    Remove the app from your device and reinstall it:
    Tap and hold any app icon on the Home Screen until the icons start to wiggle and show a small "x" in the top-right corner of the app.
    Tap the "x" in the corner of the app you want to delete.
    Tap Delete to remove the app and all of its data from your device.
    Press the Home button.
    Go to the App Store.
    Search for the app and then download it again.
    All the very best,
    Sterling

  • HT1386 I just updated my iTunes and now all of a sudden my iPhone is not syncing into iTunes. When I plug my iPhone into my computer, a thing pops up on my iPhone saying "Do you trust this computer" and I press "Trust" but it still doesn't do anything.

    I just updated my iTunes and now all of a sudden my iPhone is not syncing into iTunes. When I plug my iPhone into my computer, a thing pops up on my iPhone saying "Do you trust this computer" and I press "Trust" but it still doesn't do anything.

    Sorted it out. If anyone has this problem i reccommend visiting http://forums.ilounge.com/ipod-classic-ipod-5g-video/237546-ipod-classic-80gb-fr eezes-itunes-need-restore-plz-help-2.html#post1403546 there's some pretty good advice on it. have to go into control panel and re-format iPod into NTFS file. good luck.

  • ICloud got deleted off my MacBook Pro. Is there any way to get it back? I have an iphone now and actually have a use for it.

    iCloud got deleted off my MacBook Pro. Is there any way to get it back? I have an iphone now and actually have a use for it.

    Your signature says you have 10.6.8 - is this correct? (It it isn't please amend it to prevent confusion).
    Assuming Snow Leopard, iCloud has not been deleted - it was never there. The minimum requirement for iCloud is Lion 10.7.2 (Mountain Lion preferred): the iCloud Preference Pane does not appear on earlier systems - the MobileMe pane appears on Lion and earlier but is non non-functional - you cannot now open or access a MobileMe account.
    You can set Snow Leopard up to access the email on an existing iCloud account which has been set up on a compliant device, and you may be able to sync iCal using an unsupported (and possibly unreliable) hack, but no other facilities will work. You cannot open an iCloud account on Snow Leopard.
    This page outlines the limited use you can make of an existing iCloud account with Snow Leopard:
    http://www.wilmut.webspace.virginmedia.com/notes/icloudSL.html
    To make full use of iCloud you will have to upgrade your Mac to Lion or Mountain Lion, provided it meets the requirements.
    The requirements for Lion are:
    Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
    2GB of memory
    OS X v10.6.6 or later (v10.6.8 recommended)
    7GB of available space
    To purchase it you will have to ring Apple at the number given at the bottom left of this page.
    The requirements for Mountain Lion are listed here:
    http://www.apple.com/osx/specs/
    It is available from the Mac App Store (in Applications). (If you are currently pre-Snow Leopard you will have to upgrade to that to access the Mac App Store: it's available in the online Apple Store.)
    You should be aware that PPC programs (such as AppleWorks) will not run on Lion or above; and some other applications may not be compatible - there is a useful compatibility checklist at http://roaringapps.com/apps:table

  • TS3694 I have not updated my iphone in two years, and error -43 occured. i cannot find any help for this

    I have not updated my iphone in two years, and error -43 occured. i cannot find any help for this on the apple site

    If the phone has been hacked, we can not offer advice on Apple's support site.
    Error 1015: This error is typically caused by attempts to downgrade the iPhone, iPad, or iPod touch's software. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version is not supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you are now trying to restore to an authorized, default state.

  • I have a click wheel iPod from 2006 and want a new armband for it.  Where can I order one that I can be certain is the correct size? OR, how can I tell if the ones I see online will fit this older model?

    I have a click wheel iPod from '06 and want a new armband for it.  Where can I order one that I can be certain will fit this very outdated model??

    I lost equipment due to lightening strike several years ago, which also had old equipment and was not available. I gave insurance images and provided original receipts (my purchases were made on Apple.com), and Apple provided electronic copies of the receipts. You may want to contact Apple and check, if they can provide a copy. Insurance may depreciate the original value. I was offered residual value which i used to buy newer replacements, and provided the receipts for replacements back to insurance.

  • What brands and type can I use for my iMac 20" internal Hard Drive?

    what brands and type can I use for my iMac 20" aluminium internal Hard Drive?
    can I use WD caviar black?
    is it too hot?

    If you are replacing the drive because the existing one is faulty, that's one thing. If you just want more space, you should take advantage of having a decently fast and relatively small capacity drive in there now (instead of a huge drive). Get an external FireWire drive and off-load most of your user data there. Make your internal drive dedicated to mostly your OS and app files, with plenty of free space. That setup will make your iMac run more efficiently. I won't go into more detail, because I'm not answered your specific question... You can post back with any questions, if interested...
    To answer your questions...
    You should be able to use any SATA 3.5-inch drive internally, but you should probably keep it at or under 1TB. The main concerns are power usage and heat dissipation. A drive like the WD Caviar Green would be ideal in terms of power and heat, but they do have slower (or variable) spin rate. I have one as an external drive (750GB) and it is amazingly quiet and cool. If I had to replace the internal drive because the current drive failed, I'd put it inside. I'll trade a bit of pure performance for the efficiency (including low noise), and these drives are more advanced with higher data density and larger cache, so the trade-off from slower spin rate may not be so bad.
    You can check your current drive's model number (which is shown in System Profiler) to get the specs online. The stock drive in my old +Late 2006+ iMac is a 7200 RPM drive. The Caviar Black is a 7200 RPM drive, with a newer design. So if you want to use a Caviar Black in there, I think it would be OK.

  • What is a cache monitoring? and what it is used for?

    what is a cache monitoring? and what it is used for? how safe it is to execute the transaction RSRCACHE in development?
    Thank you,
    York

    Hi Les,
    Cache is a temporary storage for recently accessed data.
    Used to enhance query performance.
    Use t-code RSRT to view more on cache.
    Please see this link:
    http://help.sap.com/saphelp_nw04/helpdata/en/41/b987eb1443534ba78a793f4beed9d5/content.htm
    Cache helps to improve query performance. As it can save data in memory, flatfile, cluster table or BLOB.
    You can remove cache per query or inactivate it for perticular info provider or inactivate it overall.
    But which is not recommended. Yes if u know that certain queries you dont use often and its not accessing large number of records then you can inactivate it for those queries. you can manage cache via three t-codes RSRT or RSRCACHE or SPRO>SAP Reference IMG>SAP Busines Wearhouse--> Reporting relevent setting -->General Reporting Setting in BEX -->Global Cache Setting.
    please follow the link which has few good documents on cache. which will clear your complete concept for cache.
    https://service.sap.com/bi -->Product information previous releases -->BI InfoIndex --> OLAP --> you will get bunch of documents in that.
    Look at the following threads :
    OLAP Cache
    what is cache?
    also check RSRT and OLAP cahce docs
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/afc59790-0201-0010-9f99-940f7c3934fc
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/9f4a452b-0301-0010-8ca6-ef25a095834a
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/7c361b95-0501-0010-c0ab-897c5aa14504
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/31b6b490-0201-0010-e4b6-a1523327025e
    Hope this helps.
    ****Assign Points if Helpful****
    Regards,
    Ravikanth.

  • HT4718 My copy of Lion is damaged and can't be used for reinstallation, what can i do?

    when I launch Lion Recovery and try to reinstall the OS, there is a message that says that my copy of lion is damaged and can't be used for reinstallation. what can I do?

    Sorry but that makes no sense.
    The Lion install files are not stored on your computer so they can't be damaged. When using the Lion Recovery HD and you want to Re-Install Lion the install files are downloaded from the internet before the actual install begins.
    If at one time you saved the Lion install files, secifically the InstallESD.DMG, and created your own Lion Install USB thumb drive and that is what you are booting from then this same type of thing has happened to me.
    If you can't boot to the current Lion install, or you wiped your hard drive, you can try booting to the included Recovery HD and then download and install Lion or try the Online Internet Recovery HD system by holding down the Command+r keys OR the Command+Option+r keys when starting the system. One of those keyboard combos will take you to the online Lion Recovery system where you can download and install Lion.

  • I'm having trouble with my macbook pro, I have only had it for three months, when I plugged a camera sd card into the sd slot it isn't appearing anywhere on the computer and i can not access my photographs. can somebody please help me?

    I'm having trouble with my macbook pro, I have only had it for three months, when I plugged a camera sd card into the sd slot it isn't appearing anywhere on the computer and i can not access my photographs. can somebody please help me?

    Shootist007 wrote:
    Clifton I must disagree with you on the above statement. It is my opinion and experience that you should never connect the camera directly to any computer, Mac Windows Whatever.
    It is always best to Remove the memory card from the camera and put it in a card reader, whether an external reader or one built into the computer, to copy images from the card.
    Hi Shootist. I would be interested in hearing some reasoning on this. I almost always use a USB cable to connect my camera to the MBP for transferring pictures, and have moved about 30,000 this way over the last 6 years since my photography went digital. Recently, on the rare occassions when I have only a few to transfer and I was too lazy to go for the cable, I have used the card reader; about half those times I have difficulty getting the MBP to recognise the card. I find I have to press the card very hard into the slot for it to be recognised.
    My rationale is quite possibly wrong, but I feel that the USB connectors are more robust and hard-wearing than the flimsy connectors on an SD card. Also, I haven't measured it, but I think the data transfer is faster with the cable. (I just came across this test, which reports noticeably faster transfer for cable than built-in card reader, but the computer was a PC)
    Chiara, sorry for hijacking your thread.

  • When i log into icloud on my laptop,there is an error displayed? im using the same apple id and password that i use for itunes...helppp

    even do i use the same apple id and password that i use for itunes.

    Hi peacegraffiti,
    Thank you for using Apple Support Communities. 
    I understand you are having difficulties restoring your new iPhone from a previous iCloud backup. The following article provides information to help restore from an iCloud backup. 
    Get help restoring from an iCloud backup - Apple Support
    Cheers,
    Jeff D. 

Maybe you are looking for

  • Email with image attached refuses to send

    Hello I am having a problem with my email. Whenever I try to send a email with a picture attached it refuses to send. Regular email still works as does emails with files(.exl,.pdf,.doc,) attached. I also doesn't appear to be email provider specific s

  • Show_Canvas on W-B-P trigger ( 6i C/S )

    hi i have a form with two blocks, each block is on different canvas. one content and another stacked. initially the stacked canv is hidden and is displayed when the user press a button on the content canvas. i am using SHOW_VIEW('DOWN_CAN'); go_block

  • SAP Note for XD99 : Data changed but Output screen show error message

    This is regarding the XD99.. Mass data update. I am looking for SAP Note to fix it. Here data is changed KNA1-Name1 but output shows the Error message.. Is there any Sap Note for this. Edited by: Mukesh Mahajan on Dec 9, 2010 2:45 PM Edited by: Mukes

  • Cannot see Canon 5d thumbnails / miniatures in Bridge CS5

    I have Canon 5d mrk II, CS5 and Camera Raw 5.7 I can process photos in Photoshop CS5 by clicking in Bridge, but I cannot see thumbnails / miniatures in Bridge, only icons ... I have emptied the cache and chosen reset all settings in Bridge. I am lost

  • Passing attachment from a SOAP Proxy to a REST Business Service

    I am trying to create a SOAP proxy for a REST service on OSB 10g. I have to send a binary attachment as part of my SOAP request. I tried to use Service Callout to call my REST business service. Even though I receive the attachment as part of the requ