My Ipod classic works perfectly until there's around 3 GB loaded on it, then there is an error message saying that it couldn't sync because of an unknown error.
My itunes and Ipod software are both the current version, doesn't seem to change anything. It works perfectly until there's around 3 GB loaded on it, then there is an error message saying that it couldn't sync because of an unknown error.
Hey joshuafromisr,
If you resintall iTunes, it should fix the issue. The following document will go over how to remove iTunes fully and then reinstall. Depending on what version of Windows you're running you'll either follow the directions here:
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
http://support.apple.com/kb/HT1925
or here:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
http://support.apple.com/kb/HT1923
Best,
David
Similar Messages
-
My ipod touch (model A1213) is not syncing properly. I have updated the software to the latest (2.2.1) and have even resored it. Itunes says it is working and updated but will not sync and apps. Error message says that app will not sync because a newer version needed.
2.2.1 is not the latest available for any ipod touch.
Is yours the original ipod touch?
If so then:
Purchasing iOS 3.1 Software Update for iPod touch (1st generation) -
Installing the latest update on my iPad - error message saying the iPad couldn't synchronize because of an internal error, and then - error message (OxE8004017) when trying to save, and then (2003) when trying to restore - nothing works anymore - On my iPad the only thing I see is a connector cord to iTunes and nothing else.
What can I do ???Same issue for me, recently I started having issues with apps no longer being able to access my Facebook account. But the iPad Facebook account settings will not accept my password, even though the Facebook app and Safari can access my account fine. The only significant events I recall that have occurred that may have triggered this have been that via my Facebook account I killed off a lot of so called authorised connections and I changed my user name, but still have the same email address and password.
I have tried just about every solution put forward on the net, short of a factory restore, back to new, on my iPad.
I have also; deleted my iCloud account, deleted the Facebook app and account, deleted Safari data.
One would think that after I have deleted my account from the iPad that it would ask for both username/email address and password, but it only asks for password, so the username is still stored somewhere that I am unable to delete.
I also see that no one seems to have been able to get an answer from Apple. So I'm guessing they have absolutely no idea themselves.
I am hesitant to put my username on Facebook back to what it was as Facebook only give you a few chances to change your username, then you are locked.
I have iOS 7.1.1 installed.
I did have a lot of respect for Apple and their devices as they just worked, but they are becoming tarnished by ignoring what seems to be a growing issue. -
I'm trying to sync my ipod classic with my itunes library, but I get a message saying it can't be synced because the required disk can't be found. How do I find what this disk is? I have over 2,000 songs in my itunes library but only 497 sync. Help!
Could any of the music have been sourced on an external USB drive or a network drive? In iTunes, go to one of the songs that won't sync. Bring up the info page, and look at the location of that song on the disk. Does that file and path exist? That could be your problem, especially if they were on a USB drive you forgot about.
-
connected my iphone to itunes earlier today...it was working fine...now i get an error message saying that my phone is in recovery mode...needs to be reset and that all media and contacts will be deleted.....is this really true? or is there a solution
No it's not true. It's one big practical joke being played on you by Apple.
-
I am trying to restore an older iPod Touch, but do not have the passcode. I am getting an error message saying that I need to free up some space, but I cannot because I don't have the passcode and have never synced this device to my account. Help..
If it is asking for the screen-lock passcode then:
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.
Otherwise follow varjak paw recommendation -
I am stumped - I am trying to open a recent Pages file (created with a newer software that I thought was correctly installed recently) but error message says that I need a "newer version" of Pages. My software updates show that there are no updates available. Pages 09 version 4.3 shows as my current version.
You have 2 versions of Pages on your Mac.
Pages 5 is in your Applications folder.
Pages '09/'08 is in your Applications/iWork folder.
You are alternately opening the wrong versions.
Pages '09/'08 can not open Pages 5 files and you will get the warning that you need a newer version.
Pages 5/5.01 can not open Pages 5.1 files and you will get the warning that you need a newer version.
Pages 5.1 sometimes can not open its own files and you will get the warning that you need a newer version.
Pages 5 can open Pages '09 files but may damage/alter them. It can not open Pages '08 files at all.
Once opened and saved in Pages 5 the Pages '09 files can not be opened in Pages '09.
Anything that is saved to iCloud is also converted to Pages 5 files.
All Pages files no matter what version and incompatibility have the same extension .pages.
Pages 5 files are now only compatible with themselves on a very restricted set of hardware, software and Operating Systems and will not transfer correctly on any other server software than iCloud.
Apple has not only managed to confuse all its users, but also itself.
Note: Apple has removed over 95 features from Pages 5 and added many bugs:
http://www.freeforum101.com/iworktipsntrick/viewforum.php?f=22&sid=3527487677f0c 6fa05b6297cd00f8eb9&mforum=iworktipsntrick
Archive/trash Pages 5, after exporting all Pages 5 files to Pages '09 or Word .docx, and rate/review it in the App Store, then get back to work.
Peter -
I bought the Keynote app for my MacBook, but when I open the application and try to install it, I get an error message saying that the application will not work with my MacBook. What gives? And, can I please request a refund? ($19.99 = a week's groceries).
Thank you for your help! - I did try looking for all available specs about Keynote on the Apple iTunes website, and found nothing that could help me. HELP!1
Close all iWork applications
2
Uninstall Keynote; this must be done with an application remover tool to delete the installation properly. Appcleaner is known to work correctly for this purpose, it is free and can be downloaded from here: Appcleaner Download
3
empty the trash
4
shutdown the Mac and restart. After the start up chime, hold down the shift key until the apple logo appears
let the Mac complete the start up procedure completely, it will take longer than usual as the hard drive is being repaired
5
Reinstall Keynote by logging into the Mac App Store using download / install -
I made the mistake of resetting my iPod to factory defaults. Now it will only partially sync to my music library. I continually get an error message saying that certain songs are not authorized for my computer, although they are in the iTunes library on the computer and will play. It's these songs that won't transfer to the iPod. I have deauthorized and re-authorized the computer but no joy. Any ideas?
Hello there DesertRat71,
I was thinking that some of the songs in your library may have been purchased under a different apple id. You have already done the first thing I would have done by de authorizing and re authorizing. To verify this, highlight one of the songs that will not sync over and use File>Get Info. Here is the help menu link for it if you need it help://bookmark='https://help.apple.com/itunes/mac/11.0/help/index.html?localePa th=English.lproj#itns2937'
In the Summary section there will be an Apple ID entry. If it shows something different than what you are currently using then I recommend signing into the Apple ID it shows and authorizing the computer for that one as well.
All the best,
Sterling -
When i try to restore my ipod i recieve an error message saying that "problem downloading softwar for the ipod owner's ipod. error (-23) Please help i need to restore because my daughter somehow set a passcode lock on it and didnt know it and does not know passcode.
There was a problem downloading the software for the iPhone (or another iOS device)
See the steps below for error codes 3000-3999.
Errors 3000-3999 (3004, 3013, 3014, 3018, 3164, 3194, and so on): Error codes in the 3000 range generally mean that iTunes cannot contact the update server (gs.apple.com) on ports 80 or 443.
Update to the latest version of iTunes.
Verify the computer's date and time are accurate.
Check that your security or firewall software is not interfering with ports 80 or 443, or with the server gs.apple.com.
Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
An entry in your hosts file may be redirecting requests to gs.apple.com (see "Unable to contact the iOS software update server gs.apple.com" above).
Internet proxy settings can cause this issue. If you are using a proxy, try without using one.
Test restoring while connected to a known-good network. -
hi I recently dropped my ipod touch and now it wont connect to itunes. Everytime i plug it in, i get an error message saying that the usb device is not recognized
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
When downloading the new 10.7 update for itunes, an error message saying that there is an error writing to file, verify that you have access to this file comes up... what is this??
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards? -
When trying to install an extension for InDesign CC 2014 I get an error message saying that the extension only works with version 7.0 or greater. My version is 10.0.0.7 x64 Build I was using this extension fine with InDesign CCError message with InDesign CC 2014
Used the 64bit version before CC 2014 as well so don't think that's the issue. Here is the text in the .mxi file if I have missed something:
<?xml version="1.0" encoding="UTF-8" standalone="no"?>
<macromedia-extension id="PrintUI Tools" name="PrintUI Tools" requires-restart="true" version="3.0.0">
<author name="PrintUI.com"/>
<description/>
<license-agreement/>
<products>
<product maxversion="" name="InDesign" primary="true" version="7.0"/>
</products>
<files>
<file destination="" file-type="CSXS" products="" source="PrintUIManagement.zxp"/>
</files>
<update url="http://printui.com/public/downloads/updates/printui_tools_update.xml"/>
</macromedia-extension> -
HT1766 Icloud error message saying that there's no backup available to restore from.
I have just backed up my iphone 4 using icloud. It's showing that the backup was completed, 3.5gb total. Now I'm trying to restore this icloud backup on my new iphone 4s and an error message saying that there's no icloud backup appears. What' wrong? Thanks in advance!
It was an issue with the system version as long as my old iphone had the 5.1.1 already, so I updated the new one (which came with the 5.0 version), and did a factory reset selecting to use the icloud backup.
-
I have been getting a message saying my iPhone cannot be synced because an unknown error occurred (-50). I have an iPhone 4, and never had this message until after I upgraded to the new OS. Does this have something to do with icloud?
I have the same error on both iPad & iPhone when connection is made but seems to sync when I manually sync.
Maybe you are looking for
-
How can I redirect to an URL from a portlet?
I'm using Bea Workshop 8.1 and trying to perform a redirect from inside a portlet using HTTPServletResponse.sendRedirect(String url)... but nothing happens (( I tryed the same trick with a simple JSP, and that's ok, but portal pages obviously catch t
-
How to get Lion off my computer and go back to Snow Leopard???
How do I get rid of Lion and go back to Snow Leopard PERMANENTLY? I am not techno. I need simple instructions with plain descriptions. I do not have any discs. The iMac came with Snow Leopard and I loaded NOTHING. I should never have bought Lion. It
-
How to change DataSource dinamically in Oracle ADF.
Hi All, I have some requirement.to deal with different Database schemes. Here I am creating one ADF application which will accept username and password after validation Its need to redirect other page where I can perform CRUD operations.yes i can abl
-
Why can't I add/send to groups
It seems pretty definitive that on the iPhone one cannot add to a contact group or mail to a group. I must admit that I was hoping that the recent OS update would deal with this but it hasn't. My question to the experts out there is why Apple- norma
-
Solution for transferring and playing video/movies through HDMI
This solution is for those of you who want to actually USE the HDMI out on your droid X! I will explain after the instructions what movies will work and what will not (FYI - on my PC I am using Windows 7 but this also supports Mac and my Droid X has