My ipod is stuck on hold mode....i tried plugging into a power source but it doesn't respond and iTunes doesn't recognize it...i also tried playing with the hold key but nothing happens...i have a iPod classic plz help :(
my ipod is stuck on hold mode....i tried plugging into a power source but it doesn't respond and iTunes doesn't recognize it...i also tried playing with the hold key but nothing happens...plz help
Have you tried holding the centr button and menu. This will force a shutdown.
Similar Messages
-
Ipod nano keeps turning off mid song unless plugged into a power source
ipod nano keeps turning off mid song unless plugged into a power source
Hi,
I got the same problem, I just got it last night and charged it for more than 3 hours but with the same problem -
My ipod nano 6th gen will only turn on when plugged into a power source.
My ipod nano 6th gen ONLY turns on when it is plugged into a power source. As soon as I unplug it, it turns off. I also tried to reset it and it did not help. Any suggestions?
Howdy mela1223,
If I understand correctly your iPod will not stay on unless you have the charger plugged in even after resetting it. Normally this would indicate a hardware issue that would need a repair but to cover all the bases before that, the last troubleshooting that can be done for it would be to restore it with iTunes on a computer.
Restoring iPod to factory settings - Apple Support
How to restore iPod
Verify that you have an active Internet connection, because you may need to download new versions of the iTunes and iPod Software.
Download and install the latest version of iTunes if necessary.
Open iTunes. Connect your iPod to your computer using the USB or FireWire cable that came with your iPod.
After a few moments, your iPod will appear in the Source panel in iTunes.
Select your iPod in the Source panel. You will see information about your iPod appear in the Summary tab of the main iTunes window.
Click Restore.
If you are using a Mac, you will be asked to enter an administrator’s name and password.
A progress bar will appear on the computer screen, indicating that stage one of the restore process has begun. When this stage is done, iTunes will present one of two messages with instructions specific to the iPod model you are restoring.
Disconnect iPod and connect it to iPod Power Adapter (typically applies to older iPod models).
Leave iPod connected to computer to complete restore (typically applies newer iPod models).
During stage two of the restore process, the iPod displays an Apple logo as well as a progress bar at the bottom of the display. It is critical that the iPod remain connected to the computer or iPod power adapter during this stage.
Note: The progress bar may be difficult to see, because the backlight on the iPod display may be off.
After stage two of the restore process is complete, the iTunes Setup Assistant window will appear. It will ask you to name your iPod and choose your syncing preferences, as it did when you connected your iPod for the first time.
Thank you for using Apple Support Communities.
Take care,
Sterling -
I inherited a 2003 ipod from my daughter. The controls will not work when it is plugged into a power source. Can anyone help?
But they work normally when not plugged in? What kind of power source are you plugging it into? It maybe outputting more than what the iPod can handle. I had this happen to an iPod I plugged into a powerstrip that was plugged into the cigarette lighter in a vehicle an experienced the same thing.
B-rock -
Hello. When I connect my imac Start, as usual, comes the start signal and then the white screen with the load signal then nothing happens. What could be the problem?
Presuming you get the chime, most of your Mac hardware is working and has passed the first part of the power-on self-test.
If the screen comes on, basic graphics is working.
The dark gray Apple is not present inside the Mac -- it must be loaded from a boot device. If the dark gray Apple appears, at least one of your boot devices has some capabilities. The flower petal/gear moves while Darwin is initializing and loading. If it stops immediately, something is terribly wrong.
When the screen turns blue, Mac OS X has loaded and your graphics card transitions to Interrupt-driven operation. LoginWindow task draws the login screen, and Mac OS X is ready for login.
What could be the problem depends on where in the process it stops, and whether the power light is blinking. -
When I highlight objects, I'm able to move them with the arrow key but I can't drag them with my mouse.
Without system info and other details like e.g. your settings for bounding box display nobody can tell you much.
Mylenium -
Hi,I had an ipod touch 3 and then buy an ipod touch 4 and never went back to update the 3, and remained in the 3.1 software and now try to update and could not and to top it I restored it and now it doesn't work and itunes doesn't recognize it. WHAT CAN I DO?
OMG!!! NEVER MIND, I JUST DID IIIITTTTT!!!! YAYYYYYY!!!
-
I'm travelling and trying to back up my new iPhone to iCloud. I have sufficient storage, am connected to wifi and it's plugged into a power source and yet it doesn't seem to work at all. I'm currently in India. Could that be the cause or can anyone suggest any reason why this wouldn't work?
"gets stuck" - are there any error messages?
If you get the error "Backup not successful" and you've tried deleting the last backup and trying to back up manually without luck, try the following test: Go to...
Settings>iCloud>Storage & Backup>manage Storage, tap your device name in the Backups section, then look under Backup options. Turn off all apps from backup and then do a manual backup. If that doesn't work, then this post will not help. If the backup works, then go back to the app list and turn some on and try another backup. If successful, keep repeating these steps. If it fails at some point, then try to zero in on the one app that seems to make the backup fail. (I had this problem and found one app failing, probably due to a corrupt data file.)
This process will take time, but if a backup works with no app data being used but clearly fails with the original settings, then somewhere in the mix of apps is a "bad" one. -
Can't get my MacBook Pro to start up. Have shut it down several times and tried restarting but all I get is a grey screen with the spinning icon. Apple Support online suggested starting with power button followed immediately with the shift key. Same results. Also tried power button with shift key, command, and V. Black screen appeared instead with lots of data language but still no starting. This final page was suppose to result in an internal system check and restart but nothing happened and the black screen remains.Where do I go from here? Scheduled for the Genius Bar tomorrow but would like to resolve this beforehand.
You may be having a hardware problem that you cannot resolve on your own. Nevertheless...
...hold down the command and R keys whilst booting to try to get to your Recovery partition. If you can, use Disk Utility to try to Verify your boot drive (usually named "Macintosh HD" unless you've renamed it). If the verification fails, try to repair your hard drive. If everything appears to be OK, restart.
If you can't get into your Recovery partition, your problem is likely hardware related. If so, keep your appointment and see what the Apple techs have to say.
Clinton -
My iphone is stuck in restore mode. I plugged into macbook and ran a restore and it is still stuck
iphone is stuck in restore mode when i did a rebook. I hooked up to my macbook and ran a restore. Itunes ran through the restore and now it is still stuck in restore mode.
If it won't restore in the regular restore mode, you may want to try putting it in DFU mode if you haven't already. Instructions for this are linked below.
http://www.iclarified.com/entry/index.php?enid=1034
Put it in this mode, then do a restore again through your computer.
Hope this helps you out! -
I have a 3gs, and I haven't updated it for a long time because I always have issues when I do. I tried to update the ios today, and it decided to update it to 6.1.3 instead of 7, I didn't think there would be a problem, so I clicked ok. When I came to check on my phone, itunes said there was an error with the update, and my phone was in recovery mode (plug-in sign on the screen). I looked up multiple things to try, I tried putting it in DFU mode, still itunes doesn't see it. The computer also doesn't list it under devices, however when it is plugged in the Apple Mobile Support USB Driver shows up in device manager. I have tried uninstalling itunes and reinstalling, still nothing. I just want to know if there is anything else I can try. Thanks.
No, it is my phone that I've had since 2009. I just hate updating it because every time I do something goes wrong. So I put it off as long as possible. I am getting a new iphone, but I read that to have your backup transfer to the new phone, it must be a backup from the current ios.
-
I've gone through all the troubleshooting of restarting computers & itunes and updating itunes. Trying to put in to DFU mode. I've tried everything. iTunes just doesnt recognize this ipod. I have multiple ipods/iphones, and everything else works. I am eliminating the people who are saying it's a broken pin, that cannot be it, because immediately before that moment, it was connected, everything on my ipod was listed in iTunes. It just promted me to update to 6.0.1 (or whatever the most recent is) I also seen a lot of issues posted on the web of people who had jailbroken phones. This ipod touch is standard, there were no jailbreaks or anything used ever.
There was a program called Wondershare Dr.Fone, which is said to be a photo recovery tool for ipods, to retrieve recently deleted photos. (Guess I shouldn't have been trying to do that) I downloaded this trial and when it opened it stated that Itunes and this could not run at the same time. It shut down iTunes automatically. At that point, I didn't do anything more with the Wondershare Dr. Fone, I didn't try to run the program or anything. iTunes prompted me that the device needed to be upgraded to 6.0.1. I had an option to download or download and install the updated 6.0.1 from Itunes. I clicked on download only. So iTunes was downloading the new version from my iPod Touch. I shut it down the Wondershare Dr. Fone, unplugged the iphone from itunes/computer, went in to settings and did a master reset. I plugged the device back in to the computer when the iTunes logo and usb came on the screen, and the computer/iTunes doesn't recognize it anymore. I've tried 4 different usb cables and four different comuters all with up to date iTunes software. I did not break the port either, nothing is inside the port, or blocking it in anyway. All 4 computers and usb cables connected fine to other ipods and iphones.
So the questions are:
How can I get my ipod out of restore mode (iTunes logo and usb cord sybol) without iTunes recognizing it?
What could I have possibly done to this ipod?
Why doesn't anyone have the answer anywhere on the internet?
(Note: Even if the Ipod is placed in DFU mode, iTunes does not recognize it)
Please help!
Yours Truly,
Me & My UnRestorable IPOD TOUCHHello Philly,
I believe that when you reset your ipod(command given from the computer, right?) touch WHILE the ipod was updating, It cleared the system in the middle of writing files, thus corrupting(equivalent of cutting of in the middle of a sentence) the basic running system.
I suggest you go to an apple store and ask for a technical diagonosis in person. they may offer to help if the problem is fixable. If your ipod is still under warrenty, i would guess it would be free/low cost.
~Remember, I am just giving an educated guess on limited information -
I want to change the volume with the FN key but...
I was trying to do that by pressing the FN key and the number 3 and 4 to adjust the volume but it doesn't do anything. I'm using a Satellite C675. Also this laptop emanates an unpleasant toxic-like odor. I was using a Samsung laptop $380 before returning it to try this one. Also aren't the keys kind of hard to press on this laptop? I heard that if you buy the different computer parts yourselves and then call a computer technician they can do it for about $10 in Korea. Is that the case in the US as well? I live in the US.
What's the full model number? There should be a label on the bottom.
- Peter -
Was on some prehistoric version of Firefox as I only update when I have a problem with an old version. It started to become absurdly slow, so I updated to 19.0.2 as advised by the window that came up. However, if anything it's got worse. It starts with a blank window, then the 'Restore Session' page comes up, then it just doesn't let me click on or type anything at all. As I've said, if a hang is when the screen goes misty, the cursor becomes what used to be an hourglass but is now a circle and the words 'Not Responding' appear in the title bar, then this is not a hang because none of those things happen, but I can't do a damn thing with it. I've tried shutting it down through Task Manager, even though it's not using anything like the level of memory where that is usually necessary, and then restarting it, but to no avail. How can I get it working again?
Do a clean reinstall and delete the Firefox program folder before reinstalling a fresh copy of Firefox.
Download a fresh Firefox copy and save the file to the desktop.
*Firefox 19.0.x: http://www.mozilla.org/en-US/firefox/all.html
Uninstall your current Firefox version, if possible, to cleanup the Windows registry and settings in security software.
*Do NOT remove personal data when you uninstall your current Firefox version, because all profile folders will be removed and you will also lose your personal data like bookmarks and passwords from profiles of other Firefox versions.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
*It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
*http://kb.mozillazine.org/Uninstalling_Firefox
Your bookmarks and other profile data are stored in the Firefox Profile Folder and won't be affected by an uninstall and (re)install, but make sure that "remove personal data" is NOT selected when you uninstall Firefox.
If you keep having problems then also create a new profile.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*http://kb.mozillazine.org/Profile_backup
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall
Try to disable hardware acceleration in Firefox.
*Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
*https://hacks.mozilla.org/2010/09/hardware-acceleration/ -
I dropped my phone and it needed restoring and my partner did the reset but it just went into recovery mode I now can not connect it to iTunes as it is saying unable to continue with this activation. Does anybody know what I can do to fix it?
Restart your phone by holding the power/wake button and the home button for 10 - 15 seconds
Maybe you are looking for
-
_iiopClient.jar is not generated - please help!
I have an application where an EJB exposes its remote interface to the web application. The web application can ONLY call this EJB from the ejb application, no other. All other EJBs are accessed locally from this EJB (Business Delegate pattern). The
-
J Table - Single Cell Alignment
Hello everyone, import java.awt.BorderLayout; import java.awt.Color; import java.awt.Component; import java.util.Random; import javax.swing.JFrame; import javax.swing.JPanel; import javax.swing.JScrollPane; import javax.swing.JTable; import javax.swi
-
Maintain default custom vendor
Dear all, I want to maintain default vendor for some custom condition type. In case of import PO, we maintain custom vendor at item level of PO in condition type. i want that vendor code should come automatically, i have not to maintain multiple time
-
My atv won't update to the most current firmware.
So I turned on my apple tv (2nd gen) today for the first time in a couple months and it said that there was a software update available to install. After trying to install and download it multiple times it still won't let me. I keep getting the error
-
SUN One web server 6.1,strong authentication and smart card
Hi guys, I am experiencing a weired issue with smart cards. scenario: SOWS 6.1 SP6, smart card Gem Plus and Internet explorer 6 and 7 as client and strong authentication. Once I put my smart card and insert the PIN code to get into the html page, whe