My ipod nano stops the music once the backlight turns off

my iPod nano 6th generation stops the music once the backlight turns off, how do i fix it?

Your nano is pausing playback when the screen goes dark (Either when it goes dark on its own or when you click the sleep/wake button). The reason for this is that it is not detecting your headset. You may be able to hear music, but the headset jack is not inserted enough for the nano to detect that it is there (or something is blocking the connection). Here are your three options:
Insert the headset jack harder. Most folks find that this solves their problem. If you can see ANY of the silver of the plug when it is inserted, it is NOT fully inserted. You should feel and hear a click" when it is fully inserted.
Clean out the crud in the headset port. If you have tried #1 and it just won't insert all the way, it is likely that you have crud in your headset jack. Shine a light in there. The entire inside of the jack is white, so if it looks dark down at the bottom, there is probably crud down there. You can try blowing it out or using canned air. Just understand that shoving anything else in there to clean it out will be taking your warranty into your own hands! However, I have cleaned mine out using whatever was handy and small enough to fit in there and so far so good. Your results may vary!
Take it to the Apple store. If you have really tried with 1 and 2 and it is still happening, then there might just be something up with your headset port or your headset jack. If it is the headset jack, you can look closely at that and be pretty sure if that is the problem. Try another headset to make sure. If you have worked all the way through to this point and it is still happening, it is time to take it to the Apple store.
i

Similar Messages

  • My ipod touch stopped playing music in the middle of a song and now stops playing music. It says that it's playing a song but i don't hear anything. I've tried turning it off and on and restoring it's settings.

    So like the title (which i thought was suppose to be a question to tech support) suggests, my ipod touch has stopped playing any audio sound. I've turned it off and on and restored it to it's default settings and still nothing. If it helps, it stopped playing music a few minutes after i accidently had some water on it.

    - First place the iPod in a sealed container/bag of rice for a couple of days. Change the rice daily. Do not turn on or charge before it is dry.
    - The try the standard fixes, reset and restore, including restoring to factory defaults/new iPod.
    - Try both headphones and speaker.
    - If no usccessful then the water caused permenent damage to the iPod and service is required.

  • Why is my 7th Generation Ipod Nano not placing music in the same album?

    But to be more specific.
    Let's say I've bought a music album from iTunes.
    All the music is in the same album.
    But there is this other song I've downloaded and I want to put it on that same album.
    On my ipod, for some reason, they are on separate albums.
    And yes, I've put ALL songs under the same album name.
    (I know this isn't a big deal but I'd like to shuffle the album with all the songs together.)

    Hi TheBigWhiteGun,
    Thank you for using Apple Support Communities.
    Even if the album name in the same, if the artist or "album artist" is different, it still might not show under the same album.
    Why aren't songs with the same album art grouped together?
    http://support.apple.com/kb/ts1468
    There are three reasons why songs from the same album may not be grouped together
    The album names of the songs may differ slightly
    The songs from the same album may have different artists
    Not all songs in the album have the same "Album Artist" assigned to it
    See if that works for you.
    Best Regards,
    Nubz

  • How to avoid that my  Ipod nano stop playing music each minute

    My new i pod nano6th generation always stop playing musicbetween 30 sec and one minute after the launch

    Your nano is pausing playback when the screen goes dark. The reason for this is that it is not detecting your headset. You may be able to hear music, but the headset jack is not inserted enough for the nano to detect that it is there (or something is blocking the connection). Here are your three options:
    Insert the headset jack harder. Most folks find that this solves their problem. If you can see ANY of the silver of the plug when it is inserted, it is NOT fully inserted. You should feel and hear a "click" when it is fully inserted.
    Clean out the crud in the headset port. If you have tried #1 and it just won't insert all the way, it is likely that you have crud in your headset jack. Shine a light in there. The entire inside of the jack is white, so if it looks dark down at the bottom, there is probably crud down there. You can try blowing it out or using canned air. Just understand that shoving anything else in there to clean it out will be taking your warranty into your own hands! However, I have cleaned mine out using whatever was handy and small enough to fit in there and so far so good. Your results may vary!
    Take it to the Apple store. If you have really tried with 1 and 2 and it is still happening, then there might just be something up with your headset port or your headset jack. If it is the headset jack, you can look closely at that and be pretty sure if that is the problem. Try another headset to make sure. If you have worked all the way through to this point and it is still happening, it is time to take it to the Apple store.
    i

  • IPod Touch 4G screen flashes on, then backlight turns off. What do?

        On a trip to Guatemala my ipod touch backlight randomly stopped working. Sometimes when I press the power button it turns on like normal but then the light immediatly turns off. I can still faintly see the icons and such and the screen still works but I just cant see anything. Is there any fixes or will i have to replace the screen?

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • I lost my iTunes library on my pc when the hard drive crashed. None of the data on the drive was recoverable and I did not have a backup. How can I get the music that resides on my ipod nano (4th generation back onto the new hard drive on my pc.

    I lost my iTunes library on my pc when the hard drive crashed. None of the data on the drive was recoverable and I did not have a backup either locally or on the cloud. Much of the music is from old vinyl and podcasts which are no longer available.
    How can I get the music that resides on my ipod nano (4th generation) back onto the new hard drive on my pc.
    I have been reluctant to install iTunes on the new hard drive out of fear that I will lose all the contents on the ipod if I try to synch to the new hard drive.
    Help!

    No backup is a huge mistake.
    You can redownload some itunes purchases in some countries:
    Downloading past purchases from the App Store ... - Apple - Support

  • My ipod 4th gen gets wiped clean of music anytime I sync. it then only redownloads some of the music in the library and wont upload missing songs.  They show on the ipod grayed out. How do I get this to stop? re-uploading takes 4 hours.

    my ipod 4th gen gets wiped clean of music anytime I sync. it then only redownloads some of the music in the library and wont upload missing songs.  They show on the ipod grayed out. How do I get this to stop? re-uploading takes 4 hours and is never completed.  I only get some of the 6000+ songs I have. This started when I updated to IOS5 i think.

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Unsync all music and resync
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up           
    - Restore to factory settings/new iOS device.

  • My Apple iPod Nano stops playing shortly after plugging in the correct headset, but works on docking station. I've tried enabling and disabling crossfade in settings. Any suggestions?

    My apple ipod Nano stops playing shortly after plugging in the correct headset. I've tried enabling and disabling crossfade in settings. Any suggestions?

    Make sure your headphones are plugged ALL the way in, meaning the white part of the headphones is flush with the Nano and you cannot see any silver from the plug still showing.
    B-rock

  • Ok..so i was on my iPod 5g listening to music and the sound just stopped working. And whenever i turn up the volume it says that there are headphones in. and my iPod is brand new. please if someone can help it would be awesome!

    ok..so i was on my iPod 5g listening to music and the sound just stopped working. And whenever i turn up the volume it says that there are headphones in. and my iPod is brand new. please if someone can help it would be awesome!

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up                             
    - Restore to factory settings/new iOS device.
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar          
    If within warranty (yours is since the warranty is one year) and not abused, Apple will exchange it at no cost.

  • Original iPad, all music has stopped playing, no "Music", pandora or iheart radio.  How do I hear the music once again?

    Help!  Original iPad, all music has stopped playing, no preloaded "music" app, pandora or iheart radio.  How do I hear the music once again?

    Never Mind -  found help on another thread.  Rebooted the ipad, and all items now will play.

  • My ipod nano (6th gen)'s screen don't turned on... when resetting it, the screen turns to white.. the most worst is, it doesn't work out...

    I really don't know to fix it... What happen was, when i played my ipod nano, it turns to white... i don't know if I accidentally clicked anything on the screen or the buttons at the side of the device... What i did was, I connected it in my laptap because I was thinking that maybe my ipod was in hang mode. When I was able to connect it, the itunes recognized it but I can't played the music and the screen in my ipod screen was still white... SO, I restored it in factory setting... the same thing happen... i don't know what happen, so I need your help...

    You can work through the remaining five 5 R's of troubleshooting.
    http://www.apple.com/support/ipod/five_rs/
    It might also be a good idea to let the iPod's battery fully drain. Then charge it back up and restore it once more in iTunes.
    Otherwise, it's likely a hardware issue with the iPod's LCD display, meaning you'll need to take or send your iPod in for service either via Apple or a third party repair service. Here is Apple's repair pricing.
    http://www.apple.com/support/ipod/service/prices/
    Note that they don't actually repair the device, but exchange it for one of the same generation, model, and capacity.  A third party service will actually replace the damage part for a little less.  Google "iPod screen repair" and you should get a number of results to work with.
    B-rock

  • Why is my music stop playing when the backlight turns off?

    Hi I got a new iPod classic about 2 months ago and now every time the backlight turns off it stops playing music. Can somebody help me because the only solution I found was to put my backlight to ''always on''

    This is usually a sign that your headphones are not plugged all the way in.  Make sure the white part of the headset is flush with the body of the Nano and no silver from the plug can still be seen.
    If you are 100% positive that the earbuds are all the way in, double check to make sure the headphone jack is clean and clear of debris and/or damage.
    B-rock

  • HT204053 i bought my husband an ipod nano.  we already have the classic.  should i put both on the same apple id or get a new id for hubby?

    i bought my husband an ipod nano.  we already have the classic.  should i put both on the same apple id or get a new id for hubby?

    You can use the same account on both - I use the same account on my devices. Generally it's best to have just the one account, as all purchases from the store are tied to the account that buys it - so any iTunes music that you have/will buy will be tied to that account.

  • I had to restore my computer to the factory settings, which means my itunes library was lost except for what was on my ipod nano.  How do pull the songs from my ipod back onto my computer?

    I had to restore my computer to the factory settings, which means my itunes library was lost except for what was on my ipod nano.  How do pull the songs from my ipod back onto my computer?  I have over 200 songs.  There is no way I can re-purchase them!  Any help?

    How to use your iPod to move your music to a new computer 

  • I have a ipod mini from 2005, it will only work on my charger.  I did get a new ipod 4touch, how do i get the music to the new one if i don't know the password of the mini.  My ex-husband set it up for me, i not aboout to call and ask for the password.

    I have a ipod mini from 2005,  it will only work on my charger.  I did get a new i pod touch 4, how do i get the music from the old mini to the new touch.  I have never put any music on it myself, my ex-husband did it all and has the password.  I never new it.  I'm sure not about to call him and I don't think he'd give it to me anyway.  Please help!!!

    I don't think the password will matter, because you can't use anything on the iPod or in iTunes to transfer song files from iPod to computer (except for songs purchased from the iTunes Store).  However, there are third-party methods and utilities that can transfer from iPod to computer.  If you do a Google search on something like "ipod transfer," you should get some links.
    The simple software "lock" used on iPods should not prevent you from off-loading the song files.  Once the song files are on your computer, you can add them to your iTunes library.  Then, you can do a Restore on the iPod to give it a fresh start and sync it (and the iPod touch) as desired.
    NOTE:  For songs purchased by you from the iTunes Store, you can also re-download them to your computer at no cost, from the iTunes Store Purchased screen.  The link to Purchased is on the iTunes Store Home screen, under QUICK LINKS.

Maybe you are looking for

  • I can't install Snow Leopard on MacBook after Tiger

    hi everyone, i apologise if i created this topic on wrong discussion forum; i have a major problem -- there was 10.4.9 Tiger system on my MacBook. so i erased it to install new clean 10.6; i restarted my computer and during the installation there was

  • How can I use a generic indifferently in one of the generic's member functions?

    I'm curious about the following situation: I'd like to access another generic's private member in a constructor. How can I do that irrespective of the generic's actual type? Here's a sample of what I'm trying to accomplish: public class C<T> private

  • Macbook Pro with retina 13-inch - should I have gone for the 15?

    Hi I recently bought a 13-inch Macbook pro with retina display. I am delighted with it. My main usage is 1.Word processing - this is what I basically use it for (translating, text editing, heavy email) 2. Examining photos to see if they are suitable

  • Can't connect to Enterprise Manager Console.

    Hi.. I started the enterprise manager console via the command " @emctl start dbconsole " when i try to connect to the web browser based app running on port 1158 (according to contents of install/portlist.ini ) I get the error You have chosen to open

  • Minimum computer system requirements for LabVIEW 7.1

    What are the minimum computer system requirements for LabVIEW 7.1?  I have a PC with the following specifications:  1.7 GHz Pentium-4, 512 MB RAM, and a 60 GB hard drive running Windows ME.  I tried installing LabVIEW on the system but kept getting t