My iPod wont turn on i was using it one moment and it was fine now its not turning on. my home button doesnt work so i cant use that solution what should i do now
My iPod wont turn on i was using it one moment and it was fine now its not turning on. my home button doesnt work so i cant use that solution what should i do now
Try:
- iOS: Not responding or does not turn on
When it says place the iPod in recovery mode,
Place the iPod in recovery mode using one of these programs:
For PC
RecBoot: Easy Way to Put iPhone into Recovery Mode
If necessary:
Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
and
RecBoot tip
For MAC or PC
The Firmware Umbrella - TinyUmbrella
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
Similar Messages
-
my ipod 5 froze and wont work or anything and my home button doesnt work so i cant soft reset or anything does anyone know what to do about this?
Try:
- iOS: Not responding or does not turn on
Ignore the reset and when it says plae the iPod in Recovery mode
Place the iPod in recovery mode using one of these programs:
For PC
RecBoot: Easy Way to Put iPhone into Recovery Mode
or
http://joshuabailey1997.wordpress.com/2010/09/02/recboot-v1-3/
If necessary:
Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
and
RecBoot tip
RecBoot may have problems on 64X windows, then try:
Tenorshare ReiBoot – Enter & Exit iPhone, iPad, iPod Recovery Mode with a Single Click
For MAC or PC
The Firmware Umbrella - TinyUmbrella
Installs blootware on PC too
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
My iphone 4s is saying NO SERVICE.I tried to put it on airplane mode,tried to reset the network setting and also tried to restore my phone but none of the above things worked.Do you guys have any idea what should i do now?
Hi sunnylordz,
Thanks for using Apple Support Communities. Based on what you stated, it sounds like you have no service on the iPhone. It looks like you have already done some troubleshooting. There is one step you did not mention trying that i think is worth trying.
If you see No Service in the status bar of your iPhone or iPad - Apple Support
Remove the SIM card. If the SIM card is damaged, worn, or bent, or if it's too big or small for the SIM tray, contact your carrier for a new one. Then reinsert the SIM card.
Cheers,
Mario -
My ipod touch 5th gen. 16gb ios 8.1.2 wont turn on, i press the power button and nothing happens, and my home button doesnt work, PLEASE HELP ME OUT!!!
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
My iPod touch 5th generation isn't working. I plugged it in last night to charge and now its not turning on or responding to anything. It used to do this thing where it would freeze when it was 100% charged and plugged in and I was using it. I'd just unplug it, restart it (home button and top button) and then it would be fine. That had happened like 5 hours prior to me plugging it in again and then it going totally blank.
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
My iPhone 4 wont turn on, It wont go passed the charging icon and then when I take the charger out it says it needs charge. Its not the charger as iv tried several and holding lock and home button doesnt work please help!!!!!
Hello there, Conorjl7.
The following Knowledge Base article provides some good, practical steps for troubleshooting issues with charging:
iPhone and iPod touch: Charging the battery
http://support.apple.com/kb/HT1476
Particularly:
If your battery doesn't charge, or if your device shows a low-battery image, black screen, or "accessory not supported" alert, follow these steps.
Inspect the connector at the bottom of the phone:
Make sure that there are no bent pins in the connector.
Make sure that the connector is free from debris.
If there are bent pins or debris, please contact Apple Support.
Otherwise, continue troubleshooting.
Make sure that the outlet you're using works.
Make sure that the Apple USB cable and Apple USB power adapter work.
Plug the device in to power and let it charge for up to 30 minutes. If you don't have an Apple USB power adapter, try connecting to a computer's high-power USB 2.0 port (not a keyboard). The computer must be on.
If the device still exhibits an issue, try turning your device off and then on again while connected to power.
If the issue is persists, please contact Apple Support.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
I started updating my iPhone 4, but it went black screan and then started turning on and off non stop. I tried to hold the two buttons, but nothing different happened. Please, help! What should I do?!
First see if placing the iPod in Recovery Mode will allow a restore.
Next try DFU mode and restore.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
If not successful then time for an appointment at the Genius Bar of an Apple store. You are not alone with this problem. -
How Can i turn on my ipod if it shut down and my home button doesnt work?
Im not sure what to do if my ipod won turn on after it shut off randomly and my home button doesnt work.help?
You can use the Power button to wake the iPod so yu cn then unlock the iPod.
Next try connecting the iPod to your computer and try to restore via iTunes.
You can also use theis program to place the iPod in recovery mode without using switches.
RecBoot: Easy Way to Put iPhone into Recovery Mode
If yuo have iOS 5 you can, when the iPod is working, use Assistive Touch accessibility feature to do most functions without the Home button. (Settings>General>Accessibility>Assistive Touch).
Also have you looked here:
fix for Home button -
My ipod has a white screen and the home button doesnt work
my ipod has a white screen and my home button doesnt work so how can i fix it?
Try as best you can:
- iOS: Not responding or does not turn on
When it says place the iPod in recovery mode use this program
RecBoot: Easy Way to Put iPhone into Recovery Mode
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Automatically turned off now its not turning on
My Iphone 4 got switched off automatically and now its not turning on . I don't undersatand what to do now .
Can any one help on this ??Hi there RaushanChauhan,
You may find the troubleshooting steps in the article below helpful.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
Issue not resolved
My issue is still not resolved. What do I do next?
Contact Apple Support.
-Griff W. -
dropped my iphone and now home button doesnt work and will not charge.lower third of it seems not to work.i assume it's had it.what will i lose off it?
rbrook0113 wrote:
I know any device could malfucntion but if it costs $40,000 to buy you could at least warn someone of the possible malfuctions. It makes the company look bad when a large amount of your devices act up and you "cant help them" if they dont pay extra. Im just saying.
Sorry but that makes no sense at all. How can they possible know what things will possible malfunction on your device? Anything that they think is highly likely to malfunction they would have addressed in desiging and manufacturing the device in the first place, during development. They've made and sold many millions of iPhones, and many of them have lasted years without any problems (I know, I've owned such iPhones personally). So how could they possible know if yours was any more likely to develop any issues than any of those other trouble free ones?
It's hardware - stuff sometimes breaks randomly. No amout of money ever guarantees or even reduces the likelyhood of random product failures.
Take it in to Apple and see about getting it fixed. -
i have and ipod touch 4th gen that has the white screen of death but my home button doesnt work. how do i reset it?
Restore, if iTunes will let you. Everything except the password will be restored. Connect via cable to the computer that you use for sync. Be forewarned that it takes a long time. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here. -
I have a disc of Creative Cloud 6. Acrobat Pro does not work. I have used the other programs and they are fine, but when I try to open Acrobat Pro nothing happens. I am using Microsoft System 7.
what's creative cloud 6? do you mean cs6?
what version of acrobat pro do you have installed and what are you clicking to start it? -
I plugged my Ipad3 in order to update the software to version 6.1 but I got an error message and my Ipad is locked now, it's showing the Itunes logo with USB cable on the screen. What should I do now?
You will probably need to restore using Recovery Mode. You can read about it here.
http://support.apple.com/kb/ht4097
Or you can follow these Recovery Mode Instructions
Disconnect the USB cable from the iPad, but leave the other end of the cable connected to your computer's USB port.
Turn off iPad: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for iPad to turn off.
If you cannot turn off iPad using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the iPad turns off, release the Sleep/Wake and Home buttons.
While pressing and holding the Home button, reconnect the USB cable to iPad. When you reconnect the USB cable, iPad should power on.
Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears you can release the Home button.
If necessary, open iTunes. You should see the recovery mode alert that iTunes has detected an iPad in recovery mode.
Use iTunes to restore iPad. -
so my ipod is in almost perfect condition. there is no cracks or dents. its not even that old. I was on my ipod, locked it, then when back and it didn't do anything. didn't turn on or anything. iTunes isn't recognizing it. sadly my home button is crapped out. so I cannot hold down the lock button and the home button to reset it..... so what do I do????
Try this previous discussion
Turn on without Home/Power Button
Maybe you are looking for
-
Variable Required For Date Difference In Ac Create Date
Respected All; I am stuck in a variable for couple of weeks. Please help me to get the difference in dates coming under the Ac Create Date Column for respective Request Id's. I want the result in the Delay Column (Variable Required for the result of
-
How do you stop ink from leaking in HP Officejet Pro 8500 wireless
I have run through many cartridges of ink and have found that the blue ink is leaking. How do I stop this from happening? It is leaking in the tray where the ink cartridges are held. I don't see a kink in the lines and the printheads look fine. Al
-
PM and PP Shift reports in SAP
Hi Friends, Is there any method of capturing adhoc plant / process parameters in SAP without the creation of customised screens or Z tables in background. Because in a plant set up like ours there are 100's of parameters that each Shift In charges ne
-
How to pass hardcoded user to ConnectionProperties ?
Hi, How can i pass the hardcoded user to the ConnectionProperties constructor for JCA Connections. ConnectionProperties prop = new ConnectionProperties(request.getLocale(), request.getUser()); i want to pass hardcoded user object in place of - reques
-
Read header text before saving delivery during creation
Dear All, Could you please suggest, how to read the header text before saving the delivery during creation. Regards,