My ipods are no longer recognized after I installed my Iphone I have 2 ipods that I have music on and still want to use them so how do I get the computer to recognize the ipods again?

I recently got an Iphone and after I installed it on my computer my 2 ipods are no longer able to sync to the computer how do I get the computer to recognize the 2 different ipods so I can still use them?

Since you already had two iPod before getting the iPhone, what exactly did you need to "install" to use the iPhone?  Doesn't it use to the same iTunes installation you already used with the iPods?
So, I guess my question is, what changed on the computer when you started using the iPhone?
What happens now when you connect the iPod?  Is the iPod still seen in Windows device manager?

Similar Messages

  • How do I get my computer to recognize my iPod touch? I have tried all the steps already.

    How do I get my computer to recognize my iPod touch? I have tried all the support steps online already.

    Did you do everthing here including removing and reinstalling all the the Apple software using the instruction within?
    iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows
    Then try another computer to help determine if the problem is a compter or iPod problem.

  • I can see my IPhone in my Devices list when I connect with a USB but can't see my IPod when I connect with the USB.  How can I get my computer to recognize my ipod

    I can see my IPhone in my Devices list when I connect with a USB but can't see my IPod when I connect with the USB.  How can I get my computer to recognize my ipod

    iPod not recognized in 'My Computer' and in iTunes for Windows

  • How do i get my computer to recognize my ipod touch?

    I have windows 7 and have no problem with my IPhone yet when I connect a new generation 5 ipod touch I hear the tone from the computer as if it is connected but I do not see it in the windows explorer or on I Tunes. Why can I not see it?

    Do you have iTunes version 11 on your computer?
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Try another cable
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar          

  • How can i get my computer to recognize the recovery partition

    Computer says that there is no accessable data in the  partitian.  Or it cannot find it.
    So not able to restore any of the original function to my laptop

    Hi,
    If you created your set of Recovery Discs ( or a Recovery USB drive ), use this to reinstall the operating system as the process will also re-create the Recovery Partition.
    If you haven't created your Recovery Discs/Media, you can order a replacement set of Recovery Discs using the link below.
    Order HP Recovery Discs.
    If you have any problem with this link, order them directly from HP.
    If you live in the US, contact HP Here.
    If you are in another part of the world, start Here.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • How can I get my computer to recognize the canon eos digital rebel

    I have not used this camera for more than 2 years.  I now have a laptop with windows 7.  This computer will not recognize this camera when I plug it in to usb to download pictures.  I have tried everything except what is going to work.

    Do you happen to have the original discs?  Or, was EOS utility previously installed on that computer?  If not, you need to do a bit of shinanigans to get around Canon's protection (which I still don't understand, either you own a Canon, or the software is no use to you).  It's not hard, but you have to rewrite a registry file to make the software think it was previously loaded on your computer.
    Go here (providing you're in the US) to download EOS utility:
    http://www.usa.canon.com/cusa/support/consumer
    It's an "updater".  So again, you need to have had a previous version on your computer or it won't install.   Once it installs all you do is plug in your camera and turn it on and a window pops up offering a couple different options like File Transfer or Tethered Shooting.

  • How do i get my computer to recognize my ipod?

    my computer won't recognize my new ipod. i already have itunes from previous ipods.  i want to put that existing itunes on my new ipod.

    follow the steps given here...
    Syncing to a "New" Computer or replacing a "crashed" Hard Drive

  • After I reset my Ipod (deleted all data and settings) windows 7 doesn't recognize by ipod touch, and it doesn't appear in the itunes library or in the device menu, but it does charge. How can I get my computer to recognize it again?

    After I reset my Ipod (deleted all data and settings) windows 7 doesn't recognize by ipod touch, and it doesn't appear in the itunes library or in the device menu, but it does charge. How can I get my computer to recognize it again?

    Refer to this article:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538

  • I can't get my computer to recognize my iPod 4 Touch after a software update.

    I can't get my computer to recognize my iPod 4 touch after I do a software update.  The iPod goes into restore mode and the the computer won't recognize the iPod no matter what USB port I'm pluged into, or if I reboot the iPod, the computer, or iTunes. 

    Please don't get fancy with the font.  It's hard to read.
    http://support.apple.com/kb/TS1538
    There have been some problems accessing pages on the Apple web site.  If the hyperlink gives you a "We're sorry" message, try again.

  • Can I get my computer to recognize my iPod w/out losing music???

    An iPod (60GB) given to me by a friend, with about 500 songs on it, will not be recognized by my laptop (I get the iPod Updated launched and the only option it gives me is to reformat). I use another iPod (mini) on this laptop too. How can I get my computer to recognize it, or is it possible, without reformatting and losing all of the music already on it? I don't have any of the paperwork / drivers / cds that came with it, but it is still under warranty (88 days left). Please help!!! Is there a way to get the music saved off of it before I reformat it?

    This link may provide the answer you are looking for:  http://www.apple.com/support/ipad/assistant/itunes/

  • Getting the computer to recognize the new HD

    I just installed a second hard drive in my computer, but when I booted up my machine, I can't seem to find it. How can I get my computer to recognize this second one? I'm pretty sure I installed everything properly, but I'll check again if people think that I may have messed up. Thanks for your help.

    Lou,
    the front drive bay in the MDD's is on a separate bus from the optical drives - ATA66 for the front bays and ATA33 for the opticals. Drives in the front bay should be set to Cable Select, main (Master) drive on the end black connector unless there are problems with drive addressing with two drives in the bay, in which case you go to Master/Slave jumper settings.
    And although the ATA66 bus is slower than the main ATA100 bus for the back bay, the performance hit is negligible in average use and you actually get better drive-to-drive copy speeds with the two drives on separate buses.
    -Douggo

  • I have an 11" MacBook Air.  When I plug in my VGA adapter to my Thunderbolt port, the computer doesn't recognize it ... unless I reboot the computer.  Is there another way to get the computer to recognize the adapter?  (It works with my MacBook Pro)

    I have an 11" MacBook Air.  When I plug in my VGA adapter to my Thunderbolt port, the computer doesn't recognize it ... unless I reboot the computer.  Is there another way to get the computer to recognize the adapter?  (It works with my MacBook Pro)

    Thanks for the useful feedback, Knucklesmac. I agree. I must have blown something on the logic board -- because I had a faulty old KVM switch that would not switch between computers without some nasty hot-plugging/unplugging the VGA video cables. (wince!). It's like when Dizzy Dean ruined his arm because a line drive hit him in the foot and he readjusted his mechanics around the injury. I take the blame because this has been a great computer, and does not deserve any blame.
    If it will help anyone else reading this thread, C2G (née Cables to Go) has some interesting ideas for still getting external video out of this computer:
    -USB-to-VGA
    http://www.cablestogo.com/product/30545
    -Convert s-video or composite video signals to high resolution VGA
    http://www.cablestogo.com/product/40971
    The price range is $75-$85, which doesn't make horse sense to me for such an old computer -- which has a lot of life in it anyway, because its own 15" monitor is not chopped liver.
    el7

  • I accidentally deleted an Application on my iphone 5 and with it lost important files. How do i get back these files. The last iphone backup sync was after this so I cant even access an older back up as I cannot find them. How do I get back my Lost files.

    I accidentally deleted an Application on my iphone 5 and with it lost important files. How do i get back these files. The last iphone backup sync was after this so I cant even access an older back up as I cannot find them. How do I get back my Lost files.

    On your iMac launch iTunes and at the top next to the Apple symbol click iTunes > Preferences > Devices and tell me what you see. You last sync should be there showing only a device name. If you have an older backup it will be there as well the difference is it will be the device name with a date and time stamp. Sync and backups are two different things and there is a chance iTunes made a backup the first time you hooked up your iPhone 5. 

  • How do I get my ipad to recognize the microphone on my earbuds?

    How do I get my ipad to recognize the microphone on my arbuds?

    Hi,
    You'll need to make sure that both your printer and iPad are connected to the same wifi network (your home wifi). When this is complete, your printer should see your iPad.
    "Although I work for HP, I'm speaking for myself and not on behalf of HP"
    "Say "Thanks" by clicking the Kudos Star in the post that helped you.
    --Please mark the post that solves your problem as "Accepted Solution"

  • HT5570 I had to change my apple ID and now I can't access certain features on my phone because I dont remember the old ID password, how do I get my phone to recognize the new ID and password

    I had to change my apple ID and now I can't access certain features on my phone because I dont remember the old ID password, how do I get my phone to recognize the new ID and password

    What features do you need to change the ID for?

Maybe you are looking for

  • Installing Windows 7 or 8.1 on Mac

    Hello Everyone, I know some of you are trying to install Windows 8.1 on your Mac PCs or Laptops. I am going to give you some basic advise below things you need to install Windows 7 or 8.1 on your Mac PCs or Laptops. Things Required for installation.

  • Custom Content type based on "Link to a Document" does not open new folder in a dialog

    Hi,    We have created a custom Content Type  based on "Link to a Document" (0x01010A) into a document library. When I use the New Document button on the ribbon, the "Link to a document" form appears on the same window, not as a dialog. If we use the

  • Sent Gift Card not received

    I've sent a gift card to myself (to present it offline) and tried a couple of times to resend it from the iOS and still haven't received the Gift Card. I've even changed the email addresses and checked the SPAM/other folders and couldn't locate it ye

  • PRICING PROCEDURES

    Hi Sadhu and all the gurus.,                   Out of your experience can you please say how many pricing procedures did u use in your projects, and why did you use different pricing pricing procedures,and can u pls say in detail the condition types

  • I have problem to connect oracle DB with SQL developer

    I try connect to my oracle db with oracle SQL developer and received that message: http://ioj.com/v/camkp (pictures 1 and 2) if i try connect with sql plus, all well. command : select userenv('LANGUAGE') from dual; result: Connected to: Oracle Databa