My itouch 3g is stuck in a boot loop. The apple logo shows up for about 3 seconds and then turns off. I can't get it to go into dfu or recovery mode. Please Help!
I don't know what to do.
This device is not eligible for the requested build (Also sometimes displayed as an "error 3194")
Update to the latest version of iTunes.
Third-party security software or router security settings can also cause this issue. To resolve this, followTroubleshooting security software issues.
Downgrading to a previous version of iOS is not supported. If you have installed software to performunauthorized modifications to your iOS device, that software may have redirected connections to the update server (gs.apple.com) within the Hosts file. Uninstall the unauthorized modification software from the computer.
Edit out the "gs.apple.com" redirect from your hosts file, and then restart the computer for the host file changes to take affect. For steps to edit the Hosts file and allow iTunes to communicate with the update server, see iTunes: Troubleshooting iTunes Store on your computer, iPhone, iPad, or iPod—follow steps under the heading Blocked by configuration (Mac OS X / Windows) > Rebuild network information > The hosts file may also be blocking the iTunes Store. If you do not uninstall the unauthorized modification software prior to editing the hosts file, that software may automatically modify the hosts file again on restart.
Avoid using an older or modified .ipsw file. Try moving the current .ipsw file (see Advanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations), or try restoring in a new user to ensure that iTunes downloads a new .ipsw.
iPhone Error 3194 - How to Fix iTunes Error 3194?
Fix Error 3194 from iTunes during iPhone restore
Similar Messages
-
Well I was using my iphone 5, When restart and it did not turn on gets stuck in the presentation of apple (the apple) and at the top left of the screen above the apple logo reincia Appears this text, down and then turns back on and i get the same error , i try to restore with itunes restore mode and throws me error!, could anyone help? I'm going crazy!. Thank you!
This is the mistake That I get up the logo and then reboots iphone and Continues to Appear;
(NAND) _findflashmediaandkeepout: 601 physical nand block offset 1
(NAND) start: 356 this 0x96959400 PROVIDER = 0x96b1de80 falshmedia = 0x96b1de80
(NAND) WMR_Start: 149 apple PNN NAND Driver, Read / Write
(NAND) WMR_Start: 174 FIL_INT (OK)
(NAND) WMR_open :371 vfl_open (ok)
(NAND) s_cxt_boot:88 sftl: error, unclean shutdown; adopted 7775 spans
(NAND) WMR_open:420 FTL_open (ok)
(NAND)_publishServices:642 FTL capabilities: 0x00000001
(NAND)_ppnvflGetStruct:3469 checking borrowed blocks-count:23 max_count:23
(NAND)_fetchBorrowedList:881 number of borrowed blocks 16Hi Guys!
I'm German, so my english writing might not be perfect
I had the same Issue on a 5 i bought. Exact same screen and writing. Battery was totally drawn, first thing I had to replace. The screen had been replaced and since then it wouldn't work anymore according to the previous owner.
It took me a couple hours, after recieving a few errors like 4013 it just never completed the restore, got really hot as well. The Flexwire of the Dock Connector seemed damaged, replaced the dock, but that didn't help.
I almost gave up, thought the Logic Board was bad.
BUT! Then i deceided to check if it has anything to do with the Screen assembly, and it did.
Long story short, on mine the front facing camera, and sensor assy were bad.
Anyhow, the phone works ''perfect'' when i leave them unplugged. So I just ordered a new one and we will see if thats the problem or if the damage is in the Logic Board.
If so, i can live without the sensor and front cam.
Just wanted to share, good luck everyone. -
It's really annoying and this is the second time its happened.
I would get it looked at, that sounds more like a hardware problem.
-
Help - have tried everything to connect my phone to ITunes to restore and it just wont sync - is there any other ways to do this or do I need to send it back to Apple?
iOS: Not responding or does not turn on - Apple Support
click on link -
My IPad2 will not start after pushing the home button and the sleep button. The Apple logo is on for a short time then the screen goes black.
i just wanted to know what will happen to all of my pictures and videos if i restore my ipad, i dont want to lose that stuff, also i tried to update my ipad, it tells me to plug it in to the computer and when i do, it shows on itunes its extracting the data or something like that, but it does not began the update process, after awhile it just brings up ipad device not found, and then my ipad dies so i charge and let it charge all day till night time and all that pops up is the plug in to the itunes image on my screen, so i need to know what to do, please help me.
-
I tried replacing the screen with no luck. The same thing happened with the new screen. I replaced the backlight coil and the backlight ic and still have the issue. I don't know what else could be the problem. If the battery is completely dead and I plug it in the "charging battery" symbol shows just fine during the entire time it is charging, but as soon as it starts to boot up the apple logo shows for a split second then the screen goes black. The rest of the phone still boots up just fine. I can use SIRI, press the lock button like I'm about to use my phone and slide my thumb across where the "slide to unlock" would normally be and it will make the unlock noise just no picture display. I am pretty tech savvy when it comes to repairs and all of the connections look fine, replaced backlight coil and ic, replaced LCD/digitizer, tried a restore, tried a DFU restore, multiple hard resets, but I am at a loss as to where to go from here. I had dropped the phone and put a minor crack in the screen but the phone worked just fine for a couple months after before this started to happen. The phone is still under apple warranty but apple won't cover it because Apple is stating that it is "caused by the crack in the screen." But being a repair technician I know that is not the case... Good one apple. So I took it upon myself to try to determine the REAL problem. Anyone with a little more knowledge have any ideas? Any suggestions are appreciated!!
Yes, I understand that. But The screen issue is not a result of user damage. The phone was not dropped when the screen got cracked. My daughter was standing in a chair at the table and dropped one of her toys onto the bottom of the phone and cracked it right by the home button. (Nowhere near the LCD/digitizer flex cables, connections, or logic board components) then a few months later my phone had died, I plugged it in, it showed it was charging, then Apple logo disappeared and screen didn't work. AFTER contacting Apple about the issue and them telling me that it "is a result of the very minimal crack to the sheet of glass that has no relation to the LCD or Digitizer and that the warranty does not cover it I had taken it upon myself to change the LCD/digitizer to no avail, as well as backlight ic and backlight coil to no avail. But how do I go about letting Apple know that it is in fact NOT due to the cracked screen nor is it due to the flex cable connections? I can't. So the lady that works the call center phones trying to "convince" me that she knows what she is talking about and "convince" me that it is from the cracked screen I have to take her word because I can't show Apple that its not because of that without paying them $199 to fix the screen in which case they will just send me a new phone rather than fix the faulty hardware under warranty.
-
Hi I had perches one iphone4 from Hong Kong last month but after coming back i try to restore my iphone but it's give error 3194 then i try to restore it in recovery mode but still can not restore error -1 and now i cannot get out of recovery mode please help me to shovel this problem.
Are you running modified software on your phone? This error seems to be common if the firmware has been modified and you're trying to restore the phone again.
-
when i update my iphone 5 i receive error -1 my iphone 5 can not open it is on recovery mod please help me
Error 1 or -1 indicates a serious hardware issue.
Take the device to Apple or whomever provides hardware support in your country for evaluation and likely replacement. -
I've tried everything to fix my iPad after updating it today 10.9.2-now it is in recovery mode - please help ????
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY. -
Ever since the last update, My iTunes continues to quit unexpectedly. It will open for one second and then close. Anyone have a solution for this. Please help.
I've tried my best to troubleshoot. . . opening in safe mode nothing seems to work.
In the problem report, this is the error that stood out:
Crashed Thread: 8 Dispatch queue: com.apple.iad.iadidmanager
Exception Type: EXC_BAD_ACCESS (SIGSEGV)
Exception Codes: KERN_INVALID_ADDRESS at 0x0000000000000090Hi there navicin79,
You may find the troubleshooting steps in the articles below helpful. The first thing I would try is reinstalling iTunes as outlined in the first article.
Troubleshooting iTunes installation on Mac OS X
http://support.apple.com/kb/ht2311
OS X Mavericks: If an app freezes or quits unexpectedly
http://support.apple.com/kb/PH13975
-Griff W. -
When turning on my Macbook, the Apple logo shows up, but then the circle just keeps spinning and I cannot move forward...PLEASE HELP! Can I take it to the Apple Store to get fixed? Can I do something? It's driving me nuts!
Do you hear any clicking?
Boot from the install disk and repair the disk and permissions. -
How to fix OS X Yosemite installation Problem?
When the unit is rebooting the apple logo shows up then it is replaced by a cancel symbol?
Please help what to do?Do you mean a circle with a slash through it?
If so, the drive doesn’t have or can’t find the necessary startup files.
Boot into Recovery and reinstall. -
when i open iphoto i see my photo's for 1 second and then they are gone .The photo's are still there but i can see them only on the bottom or top of my screen when i try to open them i get a sign that it is not possible.Can somebody please help me?
Have you upgraded to iPhoto 9.6 for compatibility with Yosemite? If not, try that first.
It looks like iPhoto has lost the connection between the thumbnails and the original image files.
This can be caused by a corrupted iPhoto library, or the originals have been deleted or moved.
Try first to rebuild your iPhoto Library:
If you do not have a current backup of the iPhoto library, make a copy of the library, but do not overwrite any previous backup.
Launch iPhoto with the ⌥⌘-key combination (option-command) held down.
Select "rebuild" from the first aid panel. This may take a while for a large library.
Can you now see your photos again?
If not, rebuild the library with iPhoto Library manager as described by Old Toad: Re: iphoto crashed -
easy question I'm sure. imac hard full (500gb) mostly from iphoto. no capacity left. what are my options? I've thought of an external drive of 1tb and then a 2nd external drive of 3tb to back up both???? please help.
Those are the options - more space is more space.
Moving the iPhoto Library is simple:
Make sure the drive is formatted Mac OS Extended (Journaled)
1. Quit iPhoto
2. Copy the iPhoto Library from your Pictures Folder to the External Disk.
3. Hold down the option (or alt) key while launching iPhoto. From the resulting menu select 'Choose Library' and navigate to the new location. From that point on this will be the default location of your library.
4. Test the library and when you're sure all is well, trash the one on your internal HD to free up space.
Regards
TD -
My ipod froze so I restarted it, but then it happened again, so I restarted it again, and it was fine but then it ran out of battery. Now when I plug it into the charger it, the Apple sign comes up for 5 seconds then disappears, it doesn't turn on or come up with the charging sign. Is it not going to work again, or is ther something I can do? Please help.
I have the same problem, and my Ipod turned off (when I held the home and power button)
but then when I held down the home button (after turned off) nothing happened, the screen is still black.
Do you know what I should maybe do?
Thanks is advance
Maybe you are looking for
-
Hide number (or format number) on Oracle Report with Barcode
Hi al ! i have done a example about print Barcode on Oracle Report with help link : [http://download-west.oracle.com/docs/html/B10602_01/orbr_barcode.htm|http://download-west.oracle.com/docs/html/B10602_01/orbr_barcode.htm] However I want to hide num
-
Help... Is dis answer right ..
Which two are attributes of /SQL*Plus? (Choose two) A. /SQL*Plus commands cannot be abbreviated. B. /SQL*Plus commands are accesses from a browser. C. /SQL*Plus commands are used to manipulate data in tables. D. /SQL*Plus commands manipulate table de
-
Hi, I am new to Java.I am trying to install Java on my machine.I have confusion between JRE and JDK.Which one should I install?Can anyone tell me the difference between JDK and JRE? Thanks in Advance.
-
How do I insert watermarks in photos
I recently downloaded CS2 for watermarking photo's. I have read the information, called support and was led here for answers. Please help me if you know because I need to watermark photos for my business. Thanks so much!
-
Visual Studio 2013, can't see crystal viewer
Version 12.0.21005.1 REL, installed CRforVS_13_0_9, NOTHING Crystal shows up in the toolbox. Been trying for a LONG time now, just doesn't see it. I am merely attempting to load the CrystalViewer into a test program, and I can NOT find a way to get