Visual Studio 2013, can't see crystal viewer

Version 12.0.21005.1 REL, installed CRforVS_13_0_9, NOTHING Crystal shows up in the toolbox.  Been trying for a LONG time now, just doesn't see it.  I am merely attempting to load the CrystalViewer into a test program, and I can NOT find a way to get it to show up!
Any help?  This seems to be unduly frustrating.
Nothing in the "Choose Items for .NET"
Some in the COM, though, load and puton form, get this:
Not sure where to go from here...  I did this in VS2008, and it seemed to work out of the box.
Thanks!

The COM component will not work. Its all .NET assemblies now.
Could you browse to GAC and assign a reference to CrystalDesicions.Shared and CrystalDesicions.WIndows. Also, from Choose Item browse to GAC and add CrystalDesicions.WIndows and check it. See if you get the viewer in toolbox.
Do you see the same when you try a blank web app, add a web form, set .NET framework to 4.0 and try to add the viewer control?
EDIT : Just saw the snapshot you posted.
You would need to install SP9 Install executable from below link, on top of VS 2013.
http://scn.sap.com/docs/DOC-7824
- Bhushan
Senior Engineer
SAP Active Global Support
Follow us on Twitter
Got Enhancement ideas? Try the SAP Idea Place
Getting started and moving ahead with Crystal Reports .NET applications.
Message was edited by: Bhushan Hyalij

Similar Messages

  • How to hide gray borders in Crystal reports Visual Studio 2013

    Hi All,
    I have a web application in ASP.NET 2013.
    I'm using latest developer version of Crystal reports.
    When I run the report, I see gray borders around the actual report.
    This was not the case with Crystal reports in Visual Studio 2005.
    How can I hide these gray borders in Crystal reports ASP.NET Visual studio 2013?
    Please see the attached image for more info.
    Thanks,

    Hi Anurag
    Please see if this KBA will help:
    1344534 - How to change the documentView for a Crystal Report web viewer
    - Ludek
    Senior Support Engineer AGS Product Support, Global Support Center Canada
    Follow us on Twitter

  • Visual Studio 2013 to open a Sage 50 Crystal Report (which is in 2008)

    Is it possible to open a report using the latest runtimes and visual studio components (v13)?
    I am trying to view a crystal report done in 2008 on a web site I'm creating. When I add the controls (CrystalReportViewer and CrystalReportSource with path to report) and run the page it asks me for credentials. I know I can programatically set them but I wanted to try to see if it worked at first. I plugged in the credentials and the popup for credentials kept coming back. It would never show the report.
    I then tried programatically setting the login credentials and still would show the credentials popup.
    Is this because of a version issue? Any ideas or suggestions? I only have visual studio 2013 and I'm hoping it's still possible to view the report on a web site.
    Thanks in advance,
    Miguel Martorell

    Thansk for the quick reply.
    I am able to access the database using the odbc connections even with a query tool used outside of their server. I have the ODBC set up and what not. I can edit the report using crystal report from outside the server as well. I am just pointing to the .rpt file so I thought it would be a CR version or component issue.
    I will ask over there as well hoping for an answer that will help me solve this.
    Thanks again,
    Miguel Martorell

  • Unable to see function return values in Visual Studio 2013 debugger

    Hi!
    I can't see function return values in
    Microsoft Visual Studio Ultimate 2013
    Version 12.0.31101.00 Update 4
    Microsoft .NET Framework
    Version 4.5.51650
    Installed Version: Ultimate<o:p></o:p>
    as described in  http://blogs.msdn.com/b/visualstudioalm/archive/2013/06/27/seeing-function-return-values-in-the-debugger-in-visual-studio-2013.aspx
    So what can I do to get this functionality back?
    MsdnMezzo

    Hi MsdnMezzo,
    Reference:
    http://blogs.msdn.com/b/visualstudioalm/archive/2013/06/27/seeing-function-return-values-in-the-debugger-in-visual-studio-2013.aspx
    If use the same sample in the above blog provided by you, how about the result? Could you debug it with the same steps? I could debug it in my side using the VS2013.
    So to make sure that whether it is your VS IDE issue, please debug it with this sample, if it works well, I doubt that we would think about your specific project and the debugging steps.
    If so, to really repro this issue, could you share us a sample with one drive? You could upload your project to one drive and share us the downloaded link in your new reply, I will download and repro this issue in my side.
    Best Regards,
    Jack
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • After i install Visual-Studio 2013 crystal-report not working

    hi
    after i install Visual-Studio 2013 crystal-report not working on my Visual-Studio 2010 projects
    when i try to open crystal-report i see this:

    Hi E_gold,
    Crystal Reports forum may be a better place for you.
    Thanks for your understanding.
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Can't Create New Excel Project Visual Studio 2013 Office Tools The Project Cannot Be Created

    I am having this issue on two computers. If I try to create an Excel 2013 Workbook C# in new projects, and choose create a new workbook, it starts to open Excel, and then I get this error in VS
    I have tried:
    Uninstall & Reinstall of VSTO from the Visual Studio Installer
    Uninstall & Reinstall of Visual Studio 2013 Ultimate, (manually removing anything with visual studio that was left over)
    Manually turning on the add-on Visual Studio Tools for Office Design-Time Adapter for Excel
    Installing VSTO by hand
    Enabling Macros
    Running VS as administrator
    Uninstalling & Reinstalling Office 2013 Pro Plus OLP
    I have made this change to excel:
    Like I said, this problem occurs on TWO pc's.  I have tried 2013 Visual Studio R1 and R2.  Does anyone have any ideas?
    Edit 3-1-2015
    There is still no answer to this, I have tried target frameworks:
    4.0
    4.5
    4.51
    And Running as Administrator.  Recently I upgraded to the CTP of Visual Studio 2015 Ultimate and the same problem exists.

    Thanks for the reply.
    The issue is not reproducible for me and I can confirm this not a known issue. We might need to do deeper troubleshooting at the repro machines.
    Because of its complexity your question falls into the paid support category which requires a more in-depth level of support.  If the support engineer determines that the issue is the result
    of a bug the service request will be a no-charge case and you won't be charged. Please visit the below link to see the various paid support options that are available to better meet your needs.
    http://support.microsoft.com/default.aspx?id=fh;en-us;offerprophone
    Sangeeth,MSFT

  • Visual Studio 2013 Crystal Report V9 does not display in browser

    Hello, I work with Visual Studio 2013, and was anxious for version 13.0.9.1312, glad you came. Well I installed the full version and the report usually opened in VS, but when it does not compile command displays. Published in a local and it worked, but the VS does not work, if you click with the right mouse button to display codes are the codes it, but does not show. I used IE, and nothing Chomo. How does VS2013 use IIS Express as a server. Have any solution for this?

    See this post for the answer...
    Re: Crystal Reports does not load aspnet_client files to proper IISExpress directory
    Don

  • How to get Crystal Reports Editor in Visual Studio 2013 Preview?

    In Visual Studio 2005, if I double-click a *.RPT file in Solution Explorer, the file opens in the Crystal Reports editor.
    In Visual Studio 2013 Preview, if I double-click a *.RPT file, it opens in Notepad.  How do I get it to use the Crystal Reports editor again, please?
    Thanks and RICKgards
    Rick Raubenheimer

    Hi Rick,
    Since Visual Studio 2013 is still Preview version, I don't think you can find  something like this:
    SAP Crystal Reports, developer version for Microsoft Visual Studio - 2012
    Please notice that you will need to install additional packages for latest VS version, such as Visual Studio 2010 and Visual Studio 2012,
    For more details, please reopen a new case on this forum:
    http://scn.sap.com/community/crystal-reports-for-visual-studio/content?filterID=content~objecttype~objecttype[thread]
    Or contact SAP for support since it is a third party feature to Visual Studio.
    Best regards,
    Barry Wang
    <THE CONTENT IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS OR IMPLIED>
    Thanks
    MSDN Community Support
    Please remember to "Mark as Answer" the responses that resolved your issue. It is a common way to recognize those who have helped you, and makes it easier for other visitors to find the resolution later.

  • Can,t install visual studio 2013 update 4

    i was trying to install vs 2013 update 4 but there is an error and setup failed.  i'd tried several times to install it still facing same error. it says" //visual studio core features fatal error during installation .// microsoft visual c++
    2013 microsoft foundation class libraries  user cancelled installation//". my os is win 8.1 industry pr
    i downloaded it from dreamspark recently.
    helps are appreciated...

    Hello kbk gen,
    Most of the cases related to the info "visual studio core features fatal error during installation" are caused by corrupt package. Can you consult dreamspark support to know whether you can verify your source(VS installer)? Dreadmspark
    seems use some different ways to provide you the source file, so I'm not sure common ISO verify step works for you.
    Anyway, actually you can try the VS2013 Community Edition and you can verify the ISO of it by refer to here:
    https://www.visualstudio.com/en-us/downloads/visual-studio-2013-iso-sha1-vs
    Best regards,
    Barry
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • JavaScript Error in Crystal Reports for Visual Studio 2013 - revisited

    With the newly-released Crystal Reports for Visual Studio 2013, I was receiving the following error:
    Unhandled exception at line 37, column 59140 in http://localhost:4486/cfb341e5bcca4ae88166b78e20276d73/browserLink
    0x800a139e - JavaScript runtime error: Syntax error, unrecognized expression: input#__CRYSTALSTATEctl00$MainContent$CrystalReportViewer1
    It turns out that this is related to the Browser Link Visual Studio add-in. You can either ignore the error, or disable Browser Link.
    Dan

    Hi Dan
    Many thanks for the heads up
    - Ludek

  • Can't switch user in Visual Studio 2013

     
    I followed the instructions described in setenv  /resetuserdata. It waited a minute. When I tried again it failed. Same problem.Any ideas what can go wrong. Same Virtual Studio 2013?

    Hi sealsplash,
    From your description, could you please tell me what is setenv  /resetuserdata? Is it the devenv /resetuserdata?
    (1)If yes, I suggest you try to the following steps to check this issue.
    1. Close Visual Studio
    2. Start the Developer Command Prompt from Visual Studio Tools installed with Visual Studio as an administrator.
    3. Executing the command  'devenv /resetuserdata' in command line check this issue again.
    If the above suggestion still could not help you, I suggest you try the Mark's suggestion to delete the registry key check this issue again.
    Reference:
    https://social.msdn.microsoft.com/Forums/en-US/d2ef5828-ce0b-405a-b0b8-9809fc8ac0f7/cant-switch-user-in-visual-studio-2013?forum=visualstudiogeneral
    (2) If no, please provide me more detailed message about your issue.
    Hope it help you!
    Best Regards,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Visual Studio 2013 hangs/freezes when trying to click the designer view

    my Visual Studio 2013 update 1 hangs/freezes when trying to click the designer view, after clicking "Design" I can not click "split" neather "Source". What can I do ? I already tried to set the "HTML (Web Forms) Editor
    " as "Default"... thanks for support.
    In VS2010 the same worked fine.
    I "Run as Administrator".
    ty for help

    Hi,
    I assume that you are not using VS2013 Express version. In order to get the reason about the hang issue, please use devenv /log to gather activity.xm log and find HR error from this log.If it shows some package corrupt, try to repair your VS.
    Here are my general suggestions:
    Please try to run devenv /ResetSettings (in command prompt) to eliminate the related potential settings problem.
    Try disabling Add-ins (e.g. “Tools” | “Add-in Manager”) or run “devenv.exe /SafeMode”.This can eliminate the possibility that third party Add-ins or packages are causing problems. Also you can try these command lines:
    devenv.exe /resetskippkgs and devenv.exe /resetuserdata 
    Try to create a new user account. This can help isolate user profile corruption related causes.
    If the suggestions above are no help, please reinstall your VS.
    Thanks,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Crystal Report for Visual Studio 2013

    I read on this forum that Crystal Report is available to be installed for Visual Studio 2013. How do I integrate CRVS into VS IDE you must run the install exe(!)?
    How to get Crystal Reports Editor in Visual Studio 2013 Preview?

    I did face the same error while installing SP9 (at the time of 64 bit runtimes).
    I got this resolved by below steps.
    1. Uninstall SP9 (whole of it)
    2. Install 'Microsoft Visual C++ 2005 Service Pack 1 Redistributable Package ATL Security Update' 
    Downloaded http://www.microsoft.com/en-us/download/confirmation.aspx?id=14431
    3. Reinstall SP9.
    See if it works.
    - Bhushan
    Senior Engineer
    SAP Active Global Support
    Follow us on Twitter
    Got Enhancement ideas? Try the SAP Idea Place
    Getting started and moving ahead with Crystal Reports .NET applications.

  • Can I downgrade from Visual Studio 2013 Ultimate to VS 2013 professional

    Hi have a few licences of Visual Studio 2013 Ultimate  and to keep it in line with our other users who have VS 2010 Pro
    Am I ok to downgrade the licence from 2013 ultimate to 2010 pro.
    The software hasnt been installed on any PC as yet, its just a case of if licensing allows us to downgrade version and edition

    @Rakesh Borhara,
    By the way, the two products are different. If you only bought the key for your Visual Studio 2013, I don't think you can use the same key in Visual Studio 2010.
    Anyway, you can consult the license specialists to ask whether there is a account type for you so that you can use both the two products.
    Best regards,
    Barry
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Can I use ReportViewer 2010 from Visual Studio 2013

    Hi
    I wish to use the 2010 version of the ReportViewer control on a Windows form. This is from within Visual Studio 2013. How would I do this?
    Thanks

    Good idea. It did allow me add version 2010 to the Toolbox. You can see it as the second ReportViewer in the screenshot below.
    But I can't drag it onto a form. It just appears down the end. Any idea why I can't drag it onto the form?

Maybe you are looking for