My itunes need a update and i pluged in my ipod awhile doing the updat now my ipod won't turn on and the screen has a itunes ion on it what should i do
my itunes need a update and i pluged in my ipod awhile doing the updat now my ipod won't turn on and the screen has a itunes ion on it what should i do? i really need the help
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
Similar Messages
-
I have some songs/interludes on my Garageband app on my Iphone. I was planning on using some for my bands album. Now my Iphone won't turn on and I'm being told to restore the phone. Have I lost all my Garageband songs?
Hi NWL1,
Thanks for the question. If I understand correctly, the iPhone won't update and is stuck. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
Thanks for using Apple Support Communities.
Have a great day,
Mario -
My IPhone 4 won't turn on, but my lock/power button is also jammed. What should I do? What is wrong?
With USB Cable connect iPhone to power source, charger or USB port of computer. The iPhone should begin to start immediately.
-
I updated my phone with the new iOS 7.0.2 and now it won't turn on. The screen says to connect to itunes and so I have. I have gone through the recovery mode and everything but a message saying the recovery was corrupted keeps popping up. I am scared this new update crashed my phone. Please Help!
Hi there briana_webb82,
You may find the troubleshooting steps in the article below helpful.
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
-Griff W. -
My nano and iPhone4 were face to face for a few seconds and now my iPhone won't turn on. It doesn't do anything. I had just charged it. How do I get my iPhone going again? What happened?
Reset your phone:
Press the sleep/wake button & home button at the same time, keep pressing until you see the Apple logo, then release. -
I just got my ipod touch- the one with the camera not even a year ago. I have never had problems with it until now, it won't turn on. I hadn't dropped it or anything, it was working fine last night. I had it on the charger then when i woke up this morning it wouldn't turn on for anything. The battery was also fully charged. Any suggestions on what i should do?
Try connecting it ti itunes see if it picks it up, have similar problem with my IP4. It may ask you to restore!
-
What does it mean when my Mac won't turn on and it's charging low?
My MacBook suddenly just turned off and won't turn on anymore. There's just a blank screen and when I charge it, the green light is low.
Resetting SMC could solve the problem.
Intel-based Macs: Resetting the System Management Controller (SMC) -
My ipad is displaying a blue screen. I have tried to reboot but nothing is happening, it keeps displaying the blue screen. How can this be fixed so I can use my ipad again
Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Cheers, Tom -
I tried to update my phone last night. When I woke up, it said it needed to be connected to iTunes. I restored my phone and now it won't turn on and keeps saying it needs to be connected to iTunes.
probably need pc or mac update for ios 6 on your home device
-
I updated my phone to ios7 and it told me to connect to iTunes. When I did the phone said it needed to be restored. I did this and then iTunes said it can't be as it isn't eligible so now my phone won't turn on. Help please!
You can try to restore it via recovery mode as show in the link below:
http://support.apple.com/kb/ht1808 -
Since iOS 7.1 my phone won't turn on and is asking me to connect to iTunes. I connect to itunes and it says it needs to be restored. Not sure why. I try to restore it and then it says something went wrong and it won't work. So I've been without my phone for a couple days now. It gives me error code (29). The phone almost reboots and then 3/4 of the way through it gives me the error message.
If using windows...
Temporarily disable your firewall and antivirus software and try again...
http://support.apple.com/kb/TS1379
See iTunes Connection Issues here...
iTunes for Windows: Troubleshooting security software issues
NOTE:
Make sure you have the Latest Version of iTunes (v11.1.5) Installed on your computer
iTunes free download from www.itunes.com/download -
iPod touch 3rd generation crashed while updating, and now it won't turn on, and it won't charge or be recognized in iTunes because it's completely dead; it's been dead for 3 days now. I've tried pressing home/sleep buttons for reset but nothing works, I've tried using different usb ports to charge it, but nothing seems to work. Please help asap. ...Thanks!(:
After charging the iPod for half an hour, see if placing the iPod in recovery mode will allow iTunes to see the iPod so you can restore the iPod. For recovery mode see:
iPhone and iPod touch: Unable to update or restore -
I must have gotten a corrupted sector on my disk drive I place my Adobe Photoshop Elements 6 CD in the drive and it asked to install or repair or uninstall. I clicked repair and after a minute it asked for disk 1. I could not find a disk one and my case only has space for one disk. What should I do?
Jim Hamilton.PSE6 is a very old program (more than 6 years old) so what exactly are you trying to do? Have you got PSE6 already on your machine? If so, to uninstall it, all you need to do is to go to the Windows Control Panel and uninstall it under Add/Remove programs icon.
If you are trying to install it again on top of what is already installed then the best way is to uninstall it from the machine before installing again after rebooting. Also, if the disk happens to be damaged then try copying the contents from the disk to a temporary folder on your machine and then try installing from that temporary folder by clicking on the setup.exe file.
Hope this helps. -
my ipad won't turn on and I can't restore it because itunes needs me to input my security code and I can't because it's a gray screen
Try doing a reboot by holding both the power and home buttons until the apple logo appears, ignore the red slider if that appears.
-
I try to update my iphone 4 to ios 7.1.1. But now my iphone stucks in recovery mode and can't connect to itune. i use windows 7
Try the iTunes troubleshooting advice here:
Windows - http://support.apple.com/kb/ts1538
Maybe you are looking for
-
Why is osx 10.8.2 so slow?
I have been using 10.8.2 for a few weeks and aside from the deplorable issue of making scroll bars an option to turn on in preferences I am angry that OSx 10.8.2 is so slow (on a 2.66 ghz powerbook with 4GB memory and no startup items installed). I h
-
Output type for MB1B & MB1C-IDOC creation
Dear Expert, I have to make output type for MB1B & MB1C transaction to create IDOC.Can anybody guide path to create Output type for same.
-
Where to download CS5.5
Now that CS6 has been released, where can I download CS5.5? I can't find it anywhere on the Adobe website. Where can I download CS5.5? Thanks; Zach
-
How to route two vlans on two switches that are connected only on one router?
Suppose that any of the trunk links fails or if you want, suppose that there is no link between SW1 (G0/1) and SW2 (G0/1). How can you make computers in Vlan 10 to see computers in Vlan 20 and viceversa?. I tried creating a bridge group on the router
-
Reset- System shut down complete !
hi i posted this in the german forum but nobody could help me ! :( when my system was freezed or hanged, i pressed the reset button in order to reboot. the result of rebooting was, the bios posted, then a short time black screen with cursor in the l