My keyboard on my iPad is broken like the one you use to type stuff in on the screen... It is like "levitating" like there is a section below it that I can see the screen. How can I put it back to normal?

The title is my question ⬆️

Go to your iPad keyboard, on the bottom right there's a "keyboard down button", hold that button and press dock

Similar Messages

  • After burning a successful DVD in iDVD out of FCPX, how can I see the settings it used?   So I finally burned a DVD out of a Apple Pro Res file into iDVD in PAL format. My question now is how can I find out what the exact burn properties were so that I ca

    After burning a successful DVD in iDVD out of FCPX, how can I see the settings it used?
    So I finally burned a DVD out of a Apple Pro Res file into iDVD in PAL format. My question now is how can I find out what the exact burn properties were so that I can apply the same burn properties to a project in Compressor 4?
    Is it possible to see what iDVD did?

    I don't know any way you can interrogate iDVD to reveal settings to the extent that you can in a Compressor project. What you could do is open up the show's VOB in MPEG STreamclip, go to File and Reveal Stream Information; that will at least give you some rudimentary info like average bit rate. Perhaps someone, with more iDVD experience, can chime in here.
    The broader question is why use Compressor at all if your current workflow is doing the job to your satisfaction?
    The value of Compressor is that it gives you control over the many parameters that affect size quality.  and playability. The Compressor presets can give you a starting point for DVD delivery, Web, etc. From those presets, people typically experiment by adjusting the parameters until they get the desired results for their specific show. It's a little bit science and a little bit art. After experimenting, you may be able to get slightly better quality for the project you've successfully burned in iDVD by using Compressor and something likeToast…or maybe not.
    Good luck.
    Russ

  • My on screen keyboard has moved to one side and is partially inaccessible. This has only happened on Facebook messenging and is okay with everything else. How do I put it back to normal.

    MMy on screen keyboard has moved to one side and is partially inaccessible. This only happens on Facebook messenging. How do I put it back to normal?

    Hi Susan2014,
    Thank you for using Apple Support Communities.
    Since this issue is only happening in one of your apps, please force quit the app, and reopen it.
    iOS: Force an app to close
    Cheers,
    Alex H.

  • I have an apple magic mouse, sometimes when I slide mouse up to the left my whole window is enlarged.  How do I put window back to normal

    I have an apple magic mouse, sometimes when I slide mouse up to the left my whole window is enlarged.  How do I put window back to normal size

    Got confused between your header question about a wired mouse and the main question about a wireless mouse.  You said your magic mouse was frozen and added you do not have a wireless mouse.   Problem is ... the magic mouse is wireless.   The original mighty mouse was the corded version.
    The wired mouse is a regular problem.  After two to three years it tends to clog up. You can clean it (to a degree) as follows.
    Using an alcohol moistened, not wet, cotton bud, scratch at the mouse ball for a minute or so.   Then turn it upside down and on a clean piece of thick white paper or card on a firm surface, vigorously rub the mouse ball on the paper in a regular figure of eight.  Do this for a minute or so and occasionally tap the mouse on the paper.   This will help dislodge bits of fluff etc.   Then try again

  • Just updated my iPhone and the background is white or sepia this is very painful to my eyes how do I put it back to normal plz

    Updated my iPhone now it's hard to see screen as it's sepia colour how do I change it back to normal, as it's hurting my eyes I will soon need glasses and it will all be apples fault
    So help

    Scroll down on the Notification page and there is a button at the bottom
    labelled 'Edit'. Tap that button and you can add the weather back as well
    as choose other things to display.

  • How to retrieve the Id I used to create the Icloud environment. Each time I use an Apple identifier, I receive a message like it not the one you used at Icloud creation time

    Hi,
    I defined my Icloud environment some time ago. Unfortunatly, I forgot wich Id I used for it. Now I receive a message like "This is a valid Apple Id, but it is not the Id you used to create your Icloud environment.
    So, my question is: where and how can I either replace my Icloud Id or retrieve it ?
    Thank you for your help ...
    Regards
    By the way, you will probably consider that my English is as bad as a computer translation from French. I would thank you for this evaluation !

    Hi Michael,
    Follow the instructions on this link. Be sure to sign out of your old iCloud account on your computer and your devices before setting up you new one. Then sign on the new iCloud account on your PC and your devices once you have set it up using your new AppleID as the iCloud account:
    http://www.apple.com/icloud/setup/pc.html
    Cheers,
    GB

  • My print on the page is really small how do i put it back to normal size?

    All the print on the pages is in small print. When I go on a site it is not the normal size. How do I get it back to the normal size? PLEASE HELP ME........

    Firefox button > Print -> Page Setup - Scale = 100% or Shrink to Fit is usually best

  • Timeline in 3 parts - how do i put it back to normal?

    I dragged something at the side, and now the timeline looks like this:
    http://i.imgur.com/13SLZ.png
    How do i get rid of the top bit?

    I think i need to clarify my point more.
    There is three parts. The bottom contains audio tracks, the middle includes video tracks, the top part includes no tracks. Right clicking only shows me the option of 'add track'. Right clicking on the left shows 'add track' and 'reset panel'. Reset panel does nothing. Dragging the scroll bar on the middle section on the right just drags the video section up and down, doesn't remove the top section.
    This is what i want it to look like - the same as when i start a new project:
    http://i.imgur.com/RkX7K.png

  • I have original ipod touch. Screen wont open and when I connect to itunes, i get message that it wont open without passcode.How can I get anywhere?

    My ipod touch screen is frozen. Screen reads " ipod in disabled. Connect to itunes"We have powered down several times.  When I hook to itunes I get message that it wont open without passcode being intered on ipod touch. I can't enter anything on touch. Any solutions?

    Place the iPod in Recovery Mode and restore via iTunes.
    If not successful, try DFU mode.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

  • My email print is so small i can't read it. how do i get it back to normal size?

    If  you know the answer to this problem  please post it on forum as I can't read my email's. Thanks gman55.
    This question was solved.
    View Solution.

    Hi,
    If you access your email in a browser, you can use the following commands.
    Hold down the Ctrl key and press 0 ( Zero ) to return to the default size.
    Hold down the Ctrl key and tap + to increase the size of the page.
    Hold down the Ctrl key and tap - to reduce the size of the page.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • The muse window is all JUMBO since the update.... How do I put it back?

    Since the update to muse my window and buttons have gone jumbo. See image below.
    Indesign is in normal size... but Muse is HUGE. It makes it difficult to work with and menus go off screen. How do I put it back to normal?

    See Re: Muse 2014.3 update has an over-sized user interface.

  • My daughter help down the home button and the screen is now glowing, how do i tuen it back to normal?

    help me,daughter held down home button aqnd my screen is glowing, kida, where the back ground was black it is now white.  its kinda like a backlight or something. how do i put it back to normal?

    If the screen colours look like they've turned negative then try triple-clicking the home button - or go into Settings > General > Accessibility and turn White on Black 'off' (and check/change what Triple-Click Home on the same Restrictions screen is set to).

  • OS X Mountain Lion, "The server gave an error during download: 403 Forbidden." && Xcode update "To update this application, sign in to the account you used to purchase it."

    I've bought OS X Mountain Lion, the started to download it, close the mac without finish it, and now when im trying to download it agan, the appstore gave me the error "The server gave an error during download: 403 Forbidden.".
    I have an update too for the XCode and when im trying to push Update, the AppStore show me an alert with the message:
    "You have updates available for other accounts
    "To update this application, sign in to the account you used to purchase it."
    Help me please, I've allready pay for the update and cannot make use of it.
    Thanks

    I've bought OS X Mountain Lion, the started to download it, close the mac without finish it, and now when im trying to download it agan, the appstore gave me the error "The server gave an error during download: 403 Forbidden.".
    Restart your Mac and follow the instructions here >  Mac App Store: How to resume interrupted downloads
    You have updates available for other accounts
    "To update this application, sign in to the account you used to purchase it."
    Help here > Clearing up Mac App Store confusion | Macworld
    A recommendation. When upgrading to a new OS X, if it can be avoided, do not interfere with the installation.

  • I have an Ipod 4th generation ipod with a broken screen: pretty much the entire upper trim is broken off as I can see the camera. Why does my Ipod touch screen only respond in the very middle? Top and bottom work not left or right.

    When the Ipod touch 4th Gen first came out, I got this ipod. About 6 months later, it fell out of my pocket and the top of the screen broke to the point where I can see the camera. The ipod worked perfectly fine for a long time untill about 8 months later when I started having issues with the Ipod. I still was able to unlock and use it but it was hard to unlock. It worked fine when it opened but unlocking it for some reason difficult. Now, I cannot unlock it at all and I am only able to press the play button for music (double-tap home) and press cancle (in the dead center) for a soft reset. Im trying to figure out whats goin on and as of now i have no clue. I have tried resetting it and am in the process of restoring it completely. Is there any possible way that this is just a glitch that can be fixed or is it done for good because somethings broken? I'ld like to know before I really put more time into this.

    Becaise the digitizer is broken in that area
    Apple will exchange your iPod for a refurbished one for $199 for 64 GB 4G and $99 for the other 4Gs. They do not fix yours.
    Apple - iPod Repair price                       
    A third-party place like the following maybe less. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens         
    Replace the screen yourself if you are up to it
    iPod Touch Repair – iFixit                  

  • I have a grey screen on start up and can see the sign in page in the background. How do I resolve this issue.

    After my iMac has been asleep for sometime and I wake it up there is a grey screen with a load bar running at the bottom, but I can see the sign in page in the background. It eventually goes to the sign in page but it still takes a minute or so before I can actually sign in as well the mouse and keyboard are froze during that time as well.  One it unfreezes the iMac seems to work as usual.  What is going on and how do I resolve?

    Hello there Kenorb1,
    It sounds like your computer is unresponsive and the screen is grayed out with a loading bar and is unresponsive for a bit. From what you describe it sounds like you are seeing the computer wake from Safe Sleep. Here is some more information about what that is and why it is happening:
    Mac computers: Progress bar appears after waking from sleep
    Safe Sleep ensures that data stored in main memory will not be lost should the computer shut down due to the battery being drained completely . Prior to your computer entering sleep, Safe Sleep automatically saves the contents of main memory—such as desktop settings, open applications, and other work in progress—to the hard drive. 
    There are two situations in which a computer will enter safe sleep:
    In the event the battery becomes completely depleted while the computer is asleep, the computer will shut down. But when a power adapter is connected or a freshly charged battery is installed, the computer can be restarted. Press the power button as if turning the computer on and it will automatically return to the desktop state that existed prior to entering sleep. This means that applications and files will remain exactly as they were prior to the computer being put to sleep, making it easy for you to continue with your work.
    With the release of the OS X Mountain Lion v10.8.2 supplemental update 2.0, a new feature was introduced to enter safe sleep after four hours of the computer being connected to AC power. This is an effort to comply with the European Energy Standards (ErP Lot6). This will only occur if there is no wireless or Ethernet activity and no activity from external devices such as USB storage devices. 
    Thank you for using Apple Support Communities.
    Take care,
    Sterling

Maybe you are looking for