My laptop have refused to start it will just show windows boot manager on the screen,
My laptop have refused to start up, it will just show windows boot manager on the screen,and me to choose an operating system to start or press tab to select a tool but when I tryed all those things none of it will respond
Thanks also Star 1. I have gone the route you suggest also but with the same results as I explained to the hatter. I have about a dozen die-hard Windows friends and they have been trying to help me also. We have tried everything and I have read a several pages on how to do it but nothing looks like what they are saying it does. When in Vista, Vista says it is the default SU OS. When in XP, XP says it is the default SU OS. So there is nothing to change. Only the Windows Boot Manager (which is really not a manager but a boot selector) shows Vista as default and XP next. I've learned again what I already knew. Windows is a conglomerated piece of crap that is hard as heck to use.
Similar Messages
-
At first my laptop was fine after the earphone end got stuck in. Soon it started getting slower, and suddenly it stopped switching on. The people in the service station said that it wAs because the hard disk drive was corrupted. I came back home, and immediately it stopped working again. This time they said it was because of water spill. They changed the entire key board and then it started working for a while. Later I updated to maverick and that slowed down my computer. Once, I switched on my laptop, logged in, and then the screen went white. When we took it to the service center they said they will need to replace the hard disk. I am not sure what I should do. Any suggestions?
Liquid damage from water spill is progressive, unfortunately.
Best. -
I have a problem with my new Apple Air. It usually takes few seconds for the laptop to be untouched in order to be locked. So, sometimes when the screen starts to get dim in order to lock, I immediately touch the keypad to avoid locking the laptop, the result is a black screen appears with no responding to anything from pressing the keyboard to pressing the touchpad. It takes few minutes for the laptop to open again and then a message appears saying that there was a problem with the lock security.
What is happening exactly?It sounds like your sleep timers are set to too low of a value. Go to System Preferences -> Energy Saver and set both timers to longer times. The computer sleep timer should be a longer time than the display sleep timer.
-
As I say my computer, a mac mini refuse to start. When I turn it on it gives the startup sound and the screen turns grey and stay that way for a long time. And in the end a small folder icon with a question mark inside (it doesn't blink) turns up in the middle of the screen.
I have tried to start up from the installation CD holding down the C key on the keyboard. Same result. I have tried different key combinations while starting up. No result or rather same result. Nothing. Is the computer suddenly dead?
I was about to buy a new computer but I need access to my data on this one (I write this on an iPad) but hven't yet found a way.
Anybody have any good advice?
I thought it was a software problem, that the computer couldn't find the startup software or something and maybe it is, but I am beginning to fear that it could be a hardware problem.You need to re install OSX. If you have the dmg file downloaded via torrentz this is how you can create a bootable external HD or Flash drive (8 GB+)
https://discussions.apple.com/message/23957654#23957654
Peace
Harry -
When I started my iMac today, it started beeping like an alarm horn. I shut it down, and held the startup button a little longer to get it to start. Shortly after starting up, a dark 'film' slowly comes down over the screen and I get a message saying I have to shut down the computer. I've tried to start from the disk, and before I can even run a repair off utilities, it happens again. What's up? Am I screwed? HELP!!
What you are seeing is a kernel panic, often but not always connected with a hardware or peripheral issue, so, unplug everything except mouse and keyboard, reboot and hold the shift key as soon as your hear the chime, continue holding it until you see the Apple Icon and spinning progress indicator, then post back.
It will take noticeably longer than normal to start. -
I have a purchased app that will not show up in the cloud and is no longer in the app store. Is there a way to get it from my iPhone to my iPad?
You should be able to copy it from your iPhone to your computer's iTunes via File > Devices > Transfer Purchases, and if it's compatible with your iPad you can then sync it to it
-
I need to erase my hard drive and start anew, will time Machine(external drive) and all the discs I got with my computer be enough to restart things. And secondly does RAM memory cards go bad. Here's the info on my IMac:
Model Name: iMac
Model Identifier: iMac6,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.16 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 4 MB
Memory: 3 GB
Bus Speed: 667 MHz
Boot ROM Version: IM61.0093.B07
SMC Version (system): 1.10f2I need to erase my hard drive and start anew
Why do you feel you need to do this? That is such a 'Windows thing' to do!
And secondly does RAM memory cards go bad
Very rarely, but nothing in life is guaranteed (except death and taxes)! If you purchased RAM from a reputable source like Crucial or OWC it will carry a lifetime warranty. -
I have noticed recently that deleted e mail messages do not disappear from the screen. Instead they turn grey until I switch to another mailbox. When I return, they are gone. Any idea why this has started to happen?
I have noticed recently that deleted e mail messages do not disappear from the screen. Instead they turn grey until I switch to another mailbox. When I return, they are gone. Any idea why this has started to happen?
-
After updating my phone yesterday it worked for about 30 minutes. Now however, it will not let me "Slide To Unlock" the screen is totally unusable and i have alarms that go off every 8 minutes because i am not able to get into my phone to them off. has anyone else had this problem with it being "stuck"?
Basics from the user guide have always been, and still remain, restart, reset, restore from backup, restore as new.
-
Hi, I have tried to use FaceTime using both my Mac and iPhone, it showed it was connecting, but can't not be connected, and it will just show call failed. could you please look into it? thanks
There is an issue with facetime at the moment http://www.idownloadblog.com/2014/04/17/facetime-connectivity-issues-reaching-ma ny-ios-users/
-
Editing any user profile, when I try to save the change I get the error: no existing connection from which credentials can be copied. It will not let me get out of the screen. I have to close the Server App to get out. Any suggestions?
This is also being disucssed somewhere else https://discussions.apple.com/thread/5486117. I have the same problem, sorry i can't help.
-
I have a few songs that will only play for about a min the it will stop playing how can i get the songs back to a full song
Depending upon what country that you are in (music can't be re-downloaded in all countries) then try deleting the incomplete tracks from your iTunes library and redownload them via the Purchased link under Quick Links on the right-hand side of the iTunes store home page on your computer's iTunes : re-downloading.
If you aren't in a country where you can re-download music or if they re-download in the same state then try the 'report a problem' link from your purchase history : log into your account on your computer's iTunes via Store > View My Account and you should then see a Purchase History section with a 'see all' link to the right of it ; click on that and you should see a list of your purchases ; find those songs and use the 'Report a Problem' link. -
i created a password to my iPad as a parental restriction, but my daughter played with it and pushed the wrong password 10 times my ipad was disabled, what should i do, since it wont sync with itunes becoz it will just say, cannot sync files becoz the device is password enabled, Please somebody helpme
If you are talking about the passcode that gains access to the iPad - you will have to restore your iPad in order to unlock it. You will want to use the last computer that you synced with so that you can recover all of your app data, settings, etc. this explains how to restore the iPad. At the end of the process restore from your backup as described.
http://support.apple.com/kb/HT1414
If iTunes will not let you restore that way, you may need to use recovery mode to restore, and you can read about that process here.
http://support.apple.com/kb/ht4097
IF - you are talking about a restrictions pass code that you put on the device to restrict content or downloading apps or something like that - you do not want to restore from the backup - because that backup will contain the passcode that you cannot remember and you will end up where you started. -
IBook G4 14" freezes at start up or just shows vertical color lines
Hello, I am struggling with my 14" iBook G4. It either freeze at the early phase of starting up with gray background/apple icon, or shows vertical colorful lines on the screen. I tried to wipe out the HD and reinstall OS, it froze during installing. Whatever is shows on the screen does not mirror to an exteral display. I don't know if anyone has experience on this, a display issue, HD issue, or a more serious logic board issue. By the way, I was able to install OS TIGER on its HD by starting it in target mode and hooking up to another ibook with firewire cable. Any suggestion will be very appreciated. - I am not very experienced with Mac, trying to learn more at this forum. Thank you.
Hello, Cornelius. I am back. Here is what I did. I inserted the hardware test disk, restarted computer, while holding down "c" key. I could hear disk spinning. The colorful lines showed at begining, then they went away, leaving faint backlight on the screen, and DVD drive went silent. Then I restarted it, while holding down apple+L keys, like what you suggested. Disk spins, colorful lines stay, and then everything goes silent. While I was doing this, I hook the mini DVI port to a CRT monitor which I know works well for my powerbook. But no video signal was transferred to it at all, except a turning-on signal. I have another disk says "applecare protection plan", aslo says"techtool deluxe". I don't know what this is for, should I try this? I will be waiting for your or other pros' further instruction. I feel the frustration, but enjoy the learning process. Thank you very much for your precious suggestions.
-
I opened my iPhoto library today which was stored on an external hard drive and several of my videos now will not play at all. The weird thing is that each file shows a duration of 1 second and when I open them it just shows one frame. What the !&%$#@ Where did my original video files go?
Sounds like a good plan, you can never be to safe and having a second External HD is safer than one.
The only thing that I would do different, is setup the 3T as my TimeMachine Backup and then erase and move my Photos, Videos and perhaps even iTunes Media to the 1T. That way you will have room to backup both the Internal Hard Drive and the 1T External Hard Drive to the 3T using TimeMachine.
Take your time, study and use the > Time Machine - Frequently Asked Questions if you get stuck or aren't sure how to make the move.
Also see > iPhoto: How to move the Library folder to a new location
iMovie ’08: Storing or moving your video library to an external hard disk
and > iTunes for Mac: Moving your iTunes Media folder
Maybe you are looking for
-
SSRS 2008 R2 SharePoint 2010 integration error?
Hi, I have SSRS 2008 R2 in SharePoint 2010 integration mode. I'm getting kind of strange error with below scenario: 1) SSRS report has data-source to SQL Server 2008 R2 database store procedure. 2) SQL Server procedure execute SELECT query using link
-
WEBUTIL (attach and view files from database) --- Vista vs. XP differences
I have attached the following code. We are using Oracle Application Server 10.1.2.3 patch My questions are provided following the code. -- Open the local temporary file -- -- v_COMMAND := 'cmd /c start "" /WAIT "' || v_FULL_FILENAME || '" /w'; v_COMM
-
How to Define a Dynamic Barcode on a PDF Page?
I have a situation where we have a PDF form with multiple rows, (rows can be added as per the user's requirement), means user can click AddRow button and pdf will generate a new row to fill the data. There is no max limit of the rows, it vary and can
-
Date Repeats in file name coming back from plugins
My filename date repeats when I edit the photos in plugins (NIK plugins) from within lightroom. For example, if the file name is 20120402DescansoGardens and I edit in four different plugins, the file names comes back as 20120402-20120402-20120402-20
-
Revision: 9493 Author: [email protected] Date: 2009-08-23 16:09:56 -0700 (Sun, 23 Aug 2009) Log Message: Applying patch (SDK-22435) submitted by Aaron Boushley which updates ObjectUtil to use toXMLString rather than toString for XML objects. QE