My M-Air start up disk if full; I have the a new time capsule, how do I transfer and use the TC as my main storage drive?

The start-up disk on my MAC AIR is full - I just added a new Time Capsule - how do you transfer your files from the AIR to the TC and set it up to be used as my primary storage disk - not my Mac Air

Get a second external drive, drag both the iTunes library and the pictures to it, launch iTunes with the Option key held down, and point it to that instance of the library. This also works with iPhoto, but see below.
A drive or partition needs to be formatted as Mac OS Extended in order to hold an iPhoto library or for Time Machine to back it up.
(83755)

Similar Messages

  • I have a Macbook Air and the start up disk is full so it won't boot up.  How can I get it to boot so I can delete files?

    I have a Macbook Air and the start up disk is full so it will not boot up.  How can I boot it up so I can delete some files?

    You will have to see about booting it from another drive or USB flash drive or another computer. When you are able to then see the following:
    Freeing Up Space on The Hard Drive
      1. See Lion's Storage Display.
      2. You can remove data from your Home folder except for the /Home/Library/ folder.
      3. Visit The XLab FAQs and read the FAQ on freeing up space on your hard drive.
      4. Also see Freeing space on your Mac OS X startup disk.
      5. See Where did my Disk Space go?.
      6. See The Storage Display.
    You must Empty the Trash in order to recover the space they occupied on the hard drive.
    You should consider replacing the drive with a larger one. Check out OWC for drives, tutorials, and toolkits.
    Try using OmniDiskSweeper 1.8 or GrandPerspective to search your drive for large files and where they are located.

  • What does hd macintosh full mean please help I am also getting an error message saying start up disk is full i need to free up some space how do i do this please?

    what does hd macintosh full mean please help I am also getting an error message saying start up disk is full i need to free up some space how do i do this please?

    Also, you may find this link of intereset and value...
    http://macmost.com/what-to-do-when-your-hard-drive-is-full.html

  • I have a mid2009 MacBook Pro for which I have been using a USB WD HD for Time Machine.  I'd like to get a wireless HD  and start a new Time Machine backup for this Mac and retire the 5  year old WD drive.  Can I start over?

    I have a mid2009 MacBook Pro running Mavericks for which I have been using a USB WD HD for Time Machine.  I'd like to get a wireless HD  and start a new Time Machine backup for this Mac and retire the 5  year old WD drive.  Can I start over?

    no archive/ backup is perfect, HD clones can be set to make incremental additions, same as time machine however, though they are more time involved in doing so.
    See the + and - of all data backup/ archives below and "spread it around".... or the "dont put your eggs all in one basket" philosophy.
    Peace
    Data Storage Platforms; their Drawbacks & Advantages
    #1. Time Machine / Time Capsule
    Drawbacks:
    1. Time Machine is not bootable, if your internal drive fails, you cannot access files or boot from TM directly from the dead computer.
    2. Time machine is controlled by complex software, and while you can delve into the TM backup database for specific file(s) extraction, this is not ideal or desirable.
    3. Time machine can and does have the potential for many error codes in which data corruption can occur and your important backup files may not be saved correctly, at all, or even damaged. This extra link of failure in placing software between your data and its recovery is a point of risk and failure. A HD clone is not subject to these errors.
    4. Time machine mirrors your internal HD, in which cases of data corruption, this corruption can immediately spread to the backup as the two are linked. TM is perpetually connected (or often) to your computer, and corruption spread to corruption, without isolation, which TM lacks (usually), migrating errors or corruption is either automatic or extremely easy to unwittingly do.
    5. Time Machine does not keep endless copies of changed or deleted data, and you are often not notified when it deletes them; likewise you may accidently delete files off your computer and this accident is mirrored on TM.
    6. Restoring from TM is quite time intensive.
    7. TM is a backup and not a data archive, and therefore by definition a low-level security of vital/important data.
    8. TM working premise is a “black box” backup of OS, APPS, settings, and vital data that nearly 100% of users never verify until an emergency hits or their computers internal SSD or HD that is corrupt or dead and this is an extremely bad working premise on vital data.
    9. Given that data created and stored is growing exponentially, the fact that TM operates as a “store-it-all” backup nexus makes TM inherently incapable to easily backup massive amounts of data, nor is doing so a good idea.
    10. TM working premise is a backup of a users system and active working data, and NOT massive amounts of static data, yet most users never take this into consideration, making TM a high-risk locus of data “bloat”.
    11. In the case of Time Capsule, wifi data storage is a less than ideal premise given possible wireless data corruption.
    12. TM like all HD-based data is subject to ferromagnetic and mechanical failure.
    13. *Level-1 security of your vital data.
    Advantages:
    1. TM is very easy to use either in automatic mode or in 1-click backups.
    2. TM is a perfect novice level simplex backup single-layer security save against internal HD failure or corruption.
    3. TM can easily provide a seamless no-gap policy of active data that is often not easily capable in HD clones or HD archives (only if the user is lazy is making data saves).
    #2. HD archives
    Drawbacks:
    1. Like all HD-based data is subject to ferromagnetic and mechanical failure.
    2. Unless the user ritually copies working active data to HD external archives, then there is a time-gap of potential missing data; as such users must be proactive in archiving data that is being worked on or recently saved or created.
    Advantages:
    1. Fills the gap left in a week or 2-week-old HD clone, as an example.
    2. Simplex no-software data storage that is isolated and autonomous from the computer (in most cases).
    3. HD archives are the best idealized storage source for storing huge and multi-terabytes of data.
    4. Best-idealized 1st platform redundancy for data protection.
    5. *Perfect primary tier and level-2 security of your vital data.
    #3. HD clones (see below for full advantages / drawbacks)
    Drawbacks:
    1. HD clones can be incrementally updated to hourly or daily, however this is time consuming and HD clones are, often, a week or more old, in which case data between today and the most fresh HD clone can and would be lost (however this gap is filled by use of HD archives listed above or by a TM backup).
    2. Like all HD-based data is subject to ferromagnetic and mechanical failure.
    Advantages:
    1. HD clones are the best, quickest way to get back to 100% full operation in mere seconds.
    2. Once a HD clone is created, the creation software (Carbon Copy Cloner or SuperDuper) is no longer needed whatsoever, and unlike TM, which requires complex software for its operational transference of data, a HD clone is its own bootable entity.
    3. HD clones are unconnected and isolated from recent corruption.
    4. HD clones allow a “portable copy” of your computer that you can likewise connect to another same Mac and have all your APPS and data at hand, which is extremely useful.
    5. Rather than, as many users do, thinking of a HD clone as a “complimentary backup” to the use of TM, a HD clone is superior to TM both in ease of returning to 100% quickly, and its autonomous nature; while each has its place, TM can and does fill the gap in, say, a 2 week old clone. As an analogy, the HD clone itself is the brick wall of protection, whereas TM can be thought of as the mortar, which will fill any cracks in data on a week, 2-week, or 1-month old HD clone.
    6. Best-idealized 2nd platform redundancy for data protection, and 1st level for system restore of your computers internal HD. (Time machine being 2nd level for system restore of the computer’s internal HD).
    7. *Level-2 security of your vital data.
    HD cloning software options:
    1. SuperDuper HD cloning software APP (free)
    2. Carbon Copy Cloner APP (will copy the recovery partition as well)
    3. Disk utility HD bootable clone.
    #4. Online archives
    Drawbacks:
    1. Subject to server failure or due to non-payment of your hosting account, it can be suspended.
    2. Subject, due to lack of security on your part, to being attacked and hacked/erased.
    Advantages:
    1. In case of house fire, etc. your data is safe.
    2. In travels, and propagating files to friends and likewise, a mere link by email is all that is needed and no large media needs to be sent across the net.
    3. Online archives are the perfect and best-idealized 3rd platform redundancy for data protection.
    4. Supremely useful in data isolation from backups and local archives in being online and offsite for long-distance security in isolation.
    5. *Level-1.5 security of your vital data.
    #5. DVD professional archival media
    Drawbacks:
    1. DVD single-layer disks are limited to 4.7Gigabytes of data.
    2. DVD media are, given rough handling, prone to scratches and light-degradation if not stored correctly.
    Advantages:
    1. Archival DVD professional blank media is rated for in excess of 100+ years.
    2. DVD is not subject to mechanical breakdown.
    3. DVD archival media is not subject to ferromagnetic degradation.
    4. DVD archival media correctly sleeved and stored is currently a supreme storage method of archiving vital data.
    5. DVD media is once written and therefore free of data corruption if the write is correct.
    6. DVD media is the perfect ideal for “freezing” and isolating old copies of data for reference in case newer generations of data become corrupted and an older copy is needed to revert to.
    7. Best-idealized 4th platform redundancy for data protection.
    8. *Level-3 (highest) security of your vital data. 
    [*Level-4 data security under development as once-written metallic plates and synthetic sapphire and likewise ultra-long-term data storage]
    #6. Cloud based storage
    Drawbacks:
    1. Cloud storage can only be quasi-possessed.
    2. No genuine true security and privacy of data.
    3. Should never be considered for vital data storage or especially long-term.
    4. *Level-0 security of your vital data. 
    Advantages:
    1. Quick, easy and cheap storage location for simplex files for transfer to keep on hand and yet off the computer.
    2. Easy source for small-file data sharing.

  • 64GB MBA ALMOST FULL. HAVE BACKED UP VIA TIME MACHINE. NEED TO BE REMINDED OF THE STEPS TO CLEAR THE DRIVE.

    64GB MBA ALMOST FULL. HAVE BACKED UP VIA TIME MACHINE. NEED TO BE REMINDED OF THE STEPS TO CLEAR THE DRIVE. THANK YOU

    A word of warning about TimeMachine backups: the way TimeMachine works can quickly fill the backup drive because every time you change a file a new backup is made of it. That is one of the great strengths of TimeMachine because if you realize you've change a document in a way you don't like or didn't intend to, even though that change has been backed up, you can just go back further in time to a version that has what you want. However when you completely delete a file from your computer that tells TimeMachine you don't want/need it any longer. As TimeMachine goes through its thinning process files you've deleted from the computer are removed. This means you can guarantee that TimeMachine will only contain the files that are currently on your computer. Files deleted from your computer may be removed from TimeMachine. For this reason, and others, many of us who use TM for our backups also use a second non-TimeMachine method to back up to another hard drive or partition.

  • Mac Air Start up disk is full

    I'm new to Macs. My Air says my start up disk is full and to delete some files. How do I do this?

    start up disk full
    http://www.digitaltrends.com/computing/how-to-get-rid-of-the-startup-disk-full-m essage-in-os-x/#!LXQLu
    BTW, this is the Mac Mini desktop forum

  • New Time Capsule: How to copy Time Machine history from previous disk?

    Hi everybody,
    Just got a new Time Capsule which is going to serve as my new Time Machine Back-up.
    I've got a year's worth of TM back-up on my old USB disk that I'd like to pour over to the new one.
    When I try to do that, it says the Time Capsule can't be changed.
    If I simply select the new TC as the disc for TM it obviously starts a new "time line".
    How can I either copy the old data over, or merge the two?
    Thanks,
    Rob

    don't try copying via finder. that won't work. directly attached TM backups are stored differently from remote ones. directly attached ones
    are stored directly in a folder an the drive and the remote ones
    are stored in sparse bundles. the following may work. set up the TC to be the new TM drive and start a backup. as soon as it starts stop it using TM menu->stop backup. open the TC drive in finder. there should be a sparse bundle created there. double-click on it to mount it. it should be empty.
    then use the "restore" tab in disk utility to clone your old TM drive to the mounted sparse bundle. make sure to check the box to erase destination. when the cloning is finished eject the mounted sparse bundle and try backing up again.

  • How can I display and use the full RAW file?

    Hi,
    my camera (Canon S95) has a sensor with 4:3 aspect ratio and thus saves all RAW files in this format. Additionally, the camera can automatically create JPGs with a cropped ratio (e.g. 3:2 or 16:9). This is very helpful because you can see the target format already on the camera screen (with black bars on top and bottom), which helps the composition. However, when processing the photos on the big screen afterwards, it often also helps the photo to adjust the ratio a little bit and therefore use the additional information saved in the bigger 4:3 RAW file. This works very well with many of the freely available software tools.
    The problem found in Lightroom is now that it only shows the RAW photo in the cropped format and up to know I have found no way to display or use the full RAW format. So my question is: Which settings do I have to change to use the full format? What do I need to change?
    Searching a little bit on the web I found many other photographes having the exactly same problem with many different cameras. However none of them reported to have a solution for this. Still I am pretty sure that there must be a solution, since otherwise this would be a really heavy bug within Lightroom and I cannot imagine that Adobe would leave this matter unsolved.
    So I would really appreciate if someone could help me with this.
    Many Thanks
    Martin

    Hi Jao, Victoria, Lee Jay,
    Thanks for clearification. Do you have additional information about when this fix will be available and whether at least some popular old cameras will be supported?
    What I do not get is why Adobe would need to redo all existing cameras. I think this is a more general issue, where Lightroom misinterpretes the exif data which includes both the exif image height/width as well as the cropped image height/width. Intepreting this information correctly, any software should be able to display both - the full image and the cropped area (as shown by many cheap or free software tools). In the internet I found another workaround for the issue in Lightroom, which is undermining this point: When setting the cropped image height/width to the numbers of exif image height/width manually (e.g. with exif tools), Lightroom actually is able to display the full 4:3 picture.
    So this bug should be easily fixed for all cameras and I have no clue why Adobe still has no fixed it with Lightroom already available in version 4.2.
    Cheers
    Martin

  • Start up disk is full but have 309 GB available

    Keep getting a message Force Quit Applications Your Mac OS X startup disk has no more space available for application memory. To avoid problems with your computer, quit any applications you are not using. Closing windows an removing files from your startup disk will also help.
    I will quit all my applications, and reopen safari, but I keep getting the message. This has been going on for a few weeks, and if I turn off my computer and turn it back on, I won't get the message for a few days but it always comes back.
    I am just confused because I have lots of free space on my computer 309 GB. I have emptied all my trashes.
    What can I do to fix this?

    In this situation I think this is more to do with RAM/memory. Open Activity Monitor in Applications>Utilities. Go to System Memory. How much Free and Inactive, down at the bottom? What is it saying for Page outs and Swap used?
    Read
    Determine how much paging your system is performing
    http://www.thexlab.com/faqs/lackofram.html

  • How do i install and use the lacie hard disk

    i bought the 1TB Lacie Rugged Hard Drive because I have run out of disk space on my Mac desktop. Once I plug it in, I can't seem to format it for the Mac and then use it to transfer my iPhoto library from my desktop to the Lacie Hard drive. Please help! Thanks.

    I went into Disk Utility and into Erase and selected Mac OS Journaled and hit "Erase" (I hope that wasn't a big mistake.)
    ... it was only a mistake if the LaCie drive has multiple partitions on it. Sometimes they have a utiliy partition that I like to remove.
    Then when asked whether I wanted to use Time Machine to back up everything on my Mac, I hit "yes". (I hope that wasn't a big mistake.)
    ... it was only a mistake if you didn't want TimeMachine to use it.
    So now the Lacie image on my desktop has turned from orange to green (Time Machine?) and is backing up 700,000 things. . .I just want to free up space on my Mac so I was thinking of moving my iPhoto library from my Mac over to the Lacie Hard Drive. Will I be able to still do that, given what I just did above? If so, do I just drag the iPhoto library icon onto the green (Time Machine?) icon on my desktop?
    ... if the LaCie has enough space this should be fine. You might run into problems later when TimeMachine starts to fill up your drive; iPhoto might start giving you errors if there isn't enough freespace.

  • New Time Capsule - How do i make it wireless hard disk?

    Hello,
    I've bought the brand new AirPort Time Capsule and i would like to make it my new wireless external harddisk.
    It seems like i HAVE to use my Ethernet cable to make it work? But i'd like to make it wireless?
    Don't understand it, i follow the AirPort-tool instructions, "add to an existing network" and then it says that it needs Ethernet cable?
    What am i doing wrong?
    Please help me,
    Best regards.

    If we told you that....you might possibly be able to configure the TC to join your network using wireless.....and if it was successful.....and you found out that backups were going to take twice as long as normal wireless.....and that there was twice as much chance of an error occuring during a backup.....and this is the worst possible way that you could configure the TC.....
    Are you still interested in trying an unsupported method to setup the Time Capsule?
    Your chances that this might work are really quite slim. There is virtually no chance that it will work unless your existing wireless router is using WPA2 Personal security settings.

  • Mac Air says start up disk is full

    MMac air says start up disk is full & now won't turn on. What can I do?

    Step 1   
    The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
    There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
    a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later. 
    b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
    c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
    d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
    Step 2
    You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.

  • My start up disk is full I want to transfer files to my external hard drive how do I do that

    Mac Book Air start up disk is full
    I moved my iTunes to an external drive
    But this keeps happening
    Any ideas?

    time machine or keep your collection of large media files on an external HD
    To show HD on desktop
    go into FINDER at top then PREFERENCES  then GENERAL tab
    then check "hard disks" and "external disks"
    You already moved your music to your ext. HD,  why are you having any issues to transfer anything else?
    check your SSD contents in your Air
    See here for answer about the OTHER which is taking up space:
    http://pondini.org/TM/30.html
    and here:
    http://pondini.org/OSX/DiskSpace.html
    See Kappys excellent note on the rest of “other” files taking up your space:
    What is "Other" and What Can I Do About It?

  • I have a 500 gig time capsule.  I have used with a Macbook.  The Macbook has a 500 gig hard drive which is about 3/4 full.   Now we just purchased a new MacBook pro with a 1 TB hard drive.   Do I need to buy a larger Time Capsule?

    I have a 500 gig time capsule.  I have used with a Macbook.  The Macbook has a 500 gig hard drive which is about 3/4 full.   Now we just purchased a new MacBook pro with a 1 TB hard drive.   Do I need to buy a larger Time Capsule?

    Do I need to buy a larger Time Capsule?
    Probably yes. You might be able to get the full backup of the new MacBook Pro on the Time Capsule, but it will not be long before the Time Capsule is out of space.
    Better to add a new Time Capsule and backup the new MacBook Pro to the new Time Capsule, and keep the old MacBook backing up to the old Time Capsule.
    If you do not want to add a new Time Capsule, another option would be to erase the Time Capsule disk and start over again with new backups of both Macs and move forward.

  • Macbook air won't turn on and the screen will go white. It says that the start up disk is full. HELP

    When I turn my macbook air on it sends me a message saying that my start up disk is full and that I have to free up some space. When I log in into my account the screen will go white and I won't be able to do anything. I tried to restart my computer in safemode holding down the shift key while restarting it but it won't work. HELP PLEASE.

    If you could boot from an external OS X boot drive then you could delete some files.  You probably don't have such a HDD/Thumb drive but a Genius at an Apple Store or an Apple Authorized Service Provider could help you.  This is not a hardware repair so a Genius should not need to charge you for this service.
    Genius reservation http://www.apple.com/retail/geniusbar/ .
    or find an Apple Authorized Service Provider https://locate.apple.com/country
    After it is healthy again I would buy a new external HDD and use Carbon Copy Clone or Super Duper! to create a bootable clone.  Keeping a clone current is also an excellent backup methodology in addition to Time Machine.
    Commonly used backup methods: 
    https://discussions.apple.com/docs/DOC-3045
    Methodology to protect your data. Backups vs. Archives. Long-term data protection

Maybe you are looking for

  • Reverting to original RAW image in ACR

    In the past I have almost always used Nikon's Capture NX2 as my RAW editor. In that, it's immediately obvious how to get back to the original NEF camera image, or even choose to go back to different stages in the editing history. There seems no obvio

  • Can i get an older copy of itunes cause i cant stand the new version

    can i get an older copy of itunes cause i cant stand the new version

  • Lenovo B575 screen just fades away

    New here so here goes.....I own a Lenovo B575, great piece of equipment...BUT on occasion the following happens. 1.  I am done doing what I wanted so I go to START/LOG OFF. 2.  Now I want to resume some time later so I click on my personal ICON and t

  • IOS 7 - Bluetooth Problem

    Why doesn't bluetooth sync with my Acura MDX anymore with IOS 7?  I had no problem with the old IOS.

  • Error while applying watermark

    I set up a PDF Generator installation (turnkey) on a Windows 2003 Server; does anybody know why every time I try to convert a file I receive the error message "An error occured while applying watermark to the document" ? The server.log does not show