My Mac Book Pro using Mountain Lion will show a usb headset with a mic to select in the settings window. But the Rosetta Stone software I am using will not find the mic for me to select and use. What should I do?

Mac Book Pro with OS X Mountain Lion will not recognize headset mic via Rosetta Stone software. What should I do?

Hi Illaass,
I am using version 3. I have used the apple/settings on my mac. The headset is appearing there and it is selected there. In the Rosetta Stone select/find window nothing shows up. It is blank. But the volume bars react when I speak and sliding the fader has the expected effect of raising and lowering the input. There is just no device showing up as the selected input device in the Rosetta Stone software.
I have done everything my Mac instructions say to uninstall and reinstall the Rosetta Stone software properly.
I'm guessing the problem may be in the licensing. I installed it first on the old hard drive that crashed. Maybe that used the terms of the license and now installing it in the new hard drive violates the license somehow. So that's why it will not work properly. It allows me to open the lessons and asks me if I want to continue from where I left off. I click continue. Then it asks me if I want to register the software. I click the tab for already registered software and click continue. Then nothing happens. So again I click on the button that indicates I want to continue lessons from where I left off. The same process happens with it asking me if I want to register the software. And it will not proceed through a lesson.

Similar Messages

Mac Book Pro on Mountain Lion HDD shows almost full when it is not

Hi,
I am using a MacBook Pro End 2011, with an HDD of 500 GB.
There is a partition on the HDD, and one side runs Mac, and the partition is for Windows 7 via Parallels (about 125 GB).
SInce about the last 10 days, my HDD shows only 10 GB of free space, and I think it should be having much more free space.
My data is about 105 odd GB, and the folder "Applications" shows about 7.5 GB used.
I fail to understand how the HDD can be out of space.
I tried using Disk Utility, and the option to "Repair".
While it runs and repairs some permissions, it says that some permissions cannot be replaired and that they have been modified, but the problem does not resolve.
Also , the machine feels a bit slower than before.
Help much appreciated.
Thanks, in advance.

Care to share which OS you are using?
Quick fix
How To Quickly Free Up Hard Drive Space on Mac OS
http://www.youtube.com/watch?v=fO-mlLApEuk
HD Space Checkers:Disk Inventory X (FREE)
WhatSize (SHAREWARE)
OmniDiskSweeper (FREE)
GrandPerspective (FREE - donation)
Mac Performance Guide
Slimming your hard drive
Rule of thumb: You should never let your hard drive get to where you have only 10-15% of space left.

One of the users on my Mac book pro, running Mountain lion finds that no changes made in last session are there next time they log on

One of the users on my Mac book pro running mountain lion finds that no changes made in last session are there next time they log on.
For instance, the Macintosh HD icon, is always moved so that it is almost off the screen to top left hand side of the desktop.
None of my changes to the sidebar in the finder are there.
My changes to the dock have reverted.
Despite unticking the box when logging out, even though i have quit all applications, iphoto and safari are always re-opened.
iphoto always says the library needs to be upgraded... even though i did that the last time.
I have tried deleting ALL the files in the "Saved application state" folder in the library folder, but that doesn't seem to make any difference.
This is on a second admin user account.
The main user account seems to be fine.
This account used to be in the filevault on Lion, but is not now in Mountain Lion.
Can anyone help?
Thanks

The same tragic thing happened to me, not even a full two days after I bought it. I immediately powered it off, wiped it as best I could, and put it in front of a fan. I tried valiantly to get the back off, but couldn't remove all the screws. I was basically inconsolable until I realized that no matter what, my credit card insurance would cover it, since it had been less than 90 days. Fast forward 48 hours, and it seemed to run just fine. Some of the keys and the track pad were sticky, and I figured since it was covered, I might as well get it fixed. My only concern at this point was had I voided the Apple Care. I brought it in, told them what happened, said what I needed to satisfy the credit card, and they said, "We'll just swap it out for you, no problem." I was thrilled, and the Genius said they appreciated my honesty, and it was easier for all parties to just do it this way. And my Apple Care was transferred to the new machine. This was my first Mac and, needless to say, I am now an Apple devotee.

I recently upgraded my Mac Book Pro to Mountain Lion mainly to get the notes app. Notes synced once then no more. I have notes turned on in system preferences. Any ideas? Is this a known issue?

I recently upgraded my Mac Book Pro to Mountain Lion mainly to get the notes app. Notes synced once then no more. I have notes turned on in system preferences. Any ideas? Is this a known issue?

http://fpdownload.macromedia.com/get/flashplayer/pdc/11.3.300.271/install_flash_ player_osx.dmg

Since updating my Mac Book Pro from Mountain Lion to Maverick the computer is running slowly. Its slow to open and slow to download

Hi since updating my Mac Book Pro from Mountain Lion to Maverick the computer is running slow

When you have the problem, note the exact time: hour, minute, second.
If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above. Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first. Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. In most cases, a few dozen lines are more than enough. It is never necessary or helpful to post more than about 100 lines. "The more, the better" is not the rule here.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

I updated my mac book pro to mountain lion recently and my safari is not loading few web pages including apple sites please help me

i updated my mac book pro to mountain lion recently and my safari is not loading few web pages including apple sites please help me

I have this problem too but it seems pot luck and only like 5% of the time, the website will say the page is loaded but the page is just blank white...refreshing does not work and I have to go back and navigate to the page again

Action initiated: Upgrade Mac Book Pro to Mountain Lion OS X 10.8.-, via Wi-fi. After 2 hours said could not install it. I tried again through Ethernet (cable). No success. Should I buy itagain? How this thing with the Apple store works? Not so familiar.

The OS X Mountain Lion I tried to download Wi-Fi on Mac Book Pro was not successfull. Should I buy it again? Should I check with Apple store for credit?
I successfully instaled it in iMac, but have problem with laptp. I also think I should not have bought 2 upgardes, becase if I have 2 computers, one paid upgrade is good for both computers. Am I wrong? SOmeone can advise how to proceed? I want to try again through Ethernet - cable internet - instead of Wi-Fi. Thank you

You should not have paid twice. If you logged into the App Store with the same AppleID as you used to purchase Mountain Lion the first time, you should not have been charged again.
If you internet connection is not working well enough to download it, do you have access to another network that might be faster? Perhaps and Apple Store nearby?

Mac Book Pro 15" Mountain Lion 10.8 Intermittent WiFi

Hello All
I know this is a well-discussed problem already but I'll try to provide relevant details to make this post not just another rant and run-around of solutions we already know.
Before ML Reinstall (not erase and install):
- Intermittently Safari would stop loading and would say no internet connection
- My WiFi would then say, after trying to reconnect, 'connection timed-out, cannot connect to AirBears' (our school WiFi name)
- So I would try to reboot, reset SMC, reset PRAM
- Then everytime: 'no hardware installed' when I click the WiFi radar icon in the menubar
- I try to repair permissions, reboot, adjust network settings here and there according to whats floating around online (new location, MTU, DHCP, KeyChain)
- Then by some random rhythmn and combination of things it would work, for a bit
- I would get the same issues whether on school or home networks; observed for about 3-4 days
After ML Reinstall (not erase and install):
- It was fine for about two days but only because I was using WiFi from my home.
- As soon as I got on AirBears to start the week it came back after only two hours of use
- Took to school technicians, they ran hardware tests and reset the PRAM and SMC only to resurface the 'no hardware installed' thing
- They recommended I reformat my drive because its probably a tiny kink in the entire web of software(s)
- I dont wanna do that, especially since TM would just slap that kinked code right back in there
- Im at home now and its working fine
My Comments:
- AirBears (school network) seems to be a suspect
- ML reinstall seems to have suprssed the problem (at least now i dont have the problem at home)
- SMC and PRAM reset seems to induce this 'no hardware installed' problem which is resolved by rebooting
My Questions:
- How can I find out definitively if its hardware or software related? This seems to be a smart first step.

kapitanemo wrote:
How can I find out definitively if its hardware or software related?
It's neither. The problem is enterprise IT. Either the router hardware they bought is junk or they have misconfigured it. I'm sure at some point they will offer to replace your Mac with a nice, plastic Lenovo.

Cannot play mpeg 2 files on my new mac book pro running osx lion??

I can not play mpeg2 files in Ouick time on my new mac book pro running osx lion ??
- i get the message: Maybe Ouick time is not correct installed??

Try using vlc media player:
http://www.macupdate.com/app/mac/5758/vlc-media-player

I have problem shutting down mac book pro os x lion

I have setup os x lion on my mac book pro which i bought after 2010. Over 90% when i want to shut down, the process stop at the end and rounding circle appear for so long that i should turn off the system by pressing and holding power bottom. I do verify and repair the disk permission and for a while it is ok and after some times it is the same story. I even download and install the lion again but nothing happened. As i read over the apple forum some other has the same prob but no one knows how to fix. Smebody tells that it is belong to safari and other mention some other things. Pls kindlly help me.

nahmad02 wrote:
Problem description:
My Mac Book Pro OS X Lion 10.7.5 is running really slow. Takes forever to open the internet and word, please help
Safari Extensions: ℹ️
Searchme Adware! [Remove]
Simple. Click on "Remove" and follow the direction EtreCheck has for you.

I bought Studio MX in 2006. I have the CD and the serial Num. but when I tried to reinstall it, it would not recognize the serial number. I registered the product in 06. Back then it was called macromedia.

I bought Studio MX in 2006. I have the CD and the serial Num. but when I tried to reinstall it, it would not recognize the serial number. I registered the product in 06. Back then it was called macromedia.

MX 2006 is so old it's no longer supported. See if this helps you.
Error: Unable to Activate | Macromedia products
Nancy O.

Hi All, I have question about the iMac operating system. I have the last updated. The problem when I manage the place of the folder windows they are all mixing up. I mean they not on the place where I left them. how to set they stay on the same place. Tks

Hi All, I have question about the iMac operating system. I have the last updated. The problem when I manage the place of the folder windows they are all mixing up. I mean they not on the place where I left them. how to set they stay on the same place? I know there are different possibilities to set.
I tried but it not helped for me. What I can do? How and where can set this they stay on their place?
Thanks.
laci

Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In Library Manager it's the FIle -> Rebuild command)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

My mac book pro login screen background wont show and only shows a light white/blue as the background how do i fix it ?

my mac book pro mountion lion system login screen background wont show and only shows a light white/blue as the background how can i fix it ? i tried everything from loginox to onyx and it still wont solve the problem. instead of the default dark grey startup screen the background is white with a blue tint to it. the only time that the default background shows is when i log off and relog in

Welcome to the Apple Support Communities
I think that your Mac detects your hard disk, but the problem is that your new hard disk doesn't contain any operating system, so your Mac doesn't find any bootable partition and you see a question mark.
If your Mac came with DVDs, insert the Mac OS X Install DVD and hold the C key while your Mac is starting. Then, just install Mac OS X. If the hard disk isn't prepared to install Mac OS X, you will have to erase it using "Mac OS Extended (Journaled)". See > http://pondini.org/OSX/DU1.html

Why doesn't my website show correctly on Mac Book Pro Mtn. Lion?

When I open iWeb on my old Mac Book everything opens up just fine. Now that I have purchased a new Mac Book Pro, all I get when I open iWeb is the template page. I tried to move the domain only to the Library/Applications Support/iWeb, but that did not help. Any suggestions are appreciated. I hate to redo everything. I like using iWeb for our travel website. Thanks for your help.

In Lion and Mountain Lion the Home/Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and press the Return key - 10.7: Un-hide the User Library folder.
To open your domain file in Lion or Mountain Lion or to switch between multiple domain files Cyclosaurus has provided us with the following script that you can make into an Applescript application with Script Editor. Open Script Editor, copy and paste the script below into Script Editor's window and save as an application.
do shell script "/usr/bin/defaults write com.apple.iWeb iWebDefaultsDocumentPath -boolean no"delay 1
tell application "iWeb" to activate
You can download an already compiled version with this link: iWeb Switch Domain.
Just launch the application, find and select the domain file in your Home/Library/Application Support/iWeb folder that you want to open and it will open with iWeb. It modifies the iWeb preference file each time it's launched so one can switch between domain files.
WARNING: iWeb Switch Domain will overwrite an existing Domain.sites2 file if you select to create a new domain in the same folder. So rename your domain files once they've been created to something other than the default name.
OT

Mac Book Pro 17" 2006 version won't pick wireless signal with Airport update 7.5.2 and later.

My 2006 old 17" Mac Book pro is won't connect to Airport Extreme older version with update 7.5.2 and also with 7.6.2. In fact if I implement that update airport extreme will transmit over channel 100 which my Mac pro is unable to pick. Any advise ?
Thanks.

Thanks "a brody" ! Now I know I am talking to someone who knows the problem; I have checked with the site you advised me and I can tell you that my 17"MacBokk Pro (I am sorry for the mistake on first message) is one of them; in fact I have purchased that Airport Extreme 802.11n Enabler. However I forgot to tell you that my Airport Extreme base is transmitting at 5Ghz with the n protocol and my MacBook Pro has been working very well utill I tryed to update the Airport base to that 7.5.2 version: at that point my MacBook has never been able to pick the signal any more unless going backward to 7.4.2. In doing some experiments, I have found that with version 7.4.2, my Mac was picking the 5Ghz signal at channel # 44, instead, with the update 7.5.2 and later, the base started to transmit to channel # 100 and it looks like my MacBook is unable to go over the 44 channel ! (one more thing: my Mac has Leopard 10.5.8 OS). I have tryed to change the channel in the Airport base back to # 44, but my model (my Airport Extreme base is not the last model) do not allow to change the channel selection to "manual": there is only one selection "automatic". This is why I tryed to see if my Airport Extreme card (Wireless card firmware version 1.4.16.2) was not fit to received and transmit data on channels over 44.
If you have any idea that will be greatly appreciated; any how thank you very much for your time and help.

My Mac Book Pro using Mountain Lion will show a usb headset with a mic to select in the settings window. But the Rosetta Stone software I am using will not find the mic for me to select and use. What should I do?

Similar Messages

Maybe you are looking for