My mac book pro won't connect with the TV. I've watched tv many time through my computer and now it won't link tougher. how do I get it to work again?
How come I can't connect my Mac Book pro to my tv? it use to work but now it wont. how do I fix this?
Checkoneaudio,
which model MacBook Pro do you have, and which version of OS X is installed on it?
Similar Messages
-
Hi I am having trouble with iMessage on the mac book pro, it doesnt sync with the ipad and iPhone, both the ipad and iPhone do but not on the mac book pro , has anyone any suggestions, thanks in advance
First, make sure that all your devices are using the same Apple ID in iMessages including your Mac. Second, your messages that you've already started on your devices will not show up on your Mac - only ones that you start from now on will show up. Third, if you're still not syncing accross all devices, make sure you read the directions on the first page of this thread. It should work after performing those steps. Good luck!
-
I cannot install ODX Yosemite over OSX Mavericks as my Mac Book Pro (early 2011) advises that the disc "Mackintosh HD" is used for Time Machine back ups. This is not the case however as I use a separate external HD for this purpose, help please ?!
ThanksCheck this link out...
OS X: Cannot install on a volume used by Time Machine for backups
I was apart of this thread and it helped the OP...
Re: System installer thinks my main drive is my time Machine backup and won't install.
KOT -
I was in the middle of the iOS 8 update and tried to turn my phone off (yes, I realize this was dumb) But what happened was it tried to reset. Now, my iphone 4s has the connect to itunes screen. I have tried to reset, recover, etc but I keep getting and error -51 message. Any ideas how I can get my phone working again? I am not worried about saving any info just having a phone to use!
Try a Hard Reset.....
Press and hold the Wake / Sleep button AND the Home button at the same time, keep them both pressed until the Apple Logo appears on the screen, it can take 10 or more seconds. Ignore the swipe to turn off message. -
Use case:
1. I open FF (v 5.0)
2. I open multiple websites, all in different tabs
3. I close FF
4. Later I come back to FF, and the tabs and sites are no longer there. I wish them to reappear so I can pick up where I left off, but do not know, and cannot find in your help files, how to set FF to reopen them when I restart it.You can reset the warn prefs on the about:config page via the right-click context menu.
* browser.tabs.warnOnClose , see http://kb.mozillazine.org/About%3Aconfig_entries
* browser.warnOnQuit , see http://kb.mozillazine.org/browser.warnOnQuit
* browser.warnOnRestart , see http://kb.mozillazine.org/browser.warnOnRestart
You can also use Tools > Options > General > Startup: "When Firefox Starts": "Show my windows and tabs from last time"
Your above posted system details show outdated plugin(s) with known security and stability risks that you should update.
*Java Plug-in 1.6.0 for Netscape Navigator (DLL Helper)
Update the [[Java]] plugin to the latest version.
*http://java.sun.com/javase/downloads/index.jsp (Java Platform: Download JRE) -
Updated to 4.0 version and when it finished loading I got 4 identical Firefox icons on my desktop. I went back in time on my computer to go back to an order version and Firefox won't open or is very slow to open.
Do a clean (re-)install:
* Download a fresh Firefox copy and save the file to the desktop.
* Firefox 4.0: http://www.mozilla.com/firefox/all.html
* Firefox 3.6.x: http://www.mozilla.com/en-US/firefox/all-older.html
* Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
* Don't remove personal data if you uninstall the current version.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
* It may not be necessary to create a new profile, so first try if it works with your current profile and if not then create a new profile.
Your bookmarks and other profile data are stored elsewhere (not in the Firefox program folder) and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.
* http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall -
My phone won't come back on line since trying to download iso7, now what do i do?
<Edited by Host>Read this
Syncing to a "New" Computer or replacing a "crashed" Hard Drive -
Is Mac book pro 13" Retina compatible with Adobe premiere pro 7.2.2?
Does anyone know whether the mac book pro 13" is compatible with the latest Adobe premier pro 7.2.2?
Specs: Intel iris graphics card (cannot be changed), screen resolution (2560x1600 retina) and processor (2.6GHZ).
Thanks!Hi,
Since you posted in the photoshop forum, you want to ask over in the Premiere Pro forum, where folks are more familiar with that application.
https://forums.adobe.com/community/premiere -
Is Mac book pro 13" Retina compatible with Adobe prem pro 7.2.2?
Does anyone know whether the Intel iris graphics card, the screen resolution (2560x1600 retina) and the processor (2.6GHZ) on mac book pro 13" is compatible with the latest Adobe premier pro 7.2.2? (it is not possible to change the graphics card on the 13" mac).
Hi,
Since you posted in the photoshop forum, you want to ask over in the Premiere Pro forum, where folks are more familiar with that application.
https://forums.adobe.com/community/premiere -
I have an epson xp600 and a mac book pro. Wireless printing is OK if I'm lucky for one time only then a 'failed to connect' message so I have to delete and re add the printer to get it working again (but just once!) then the same occurs. Why?
I am not certain this will fix your problem but I suggest you assign the printer a static IP address.
Using the printer's front panel, select Menu > Network > WLAN > TCP/IP > Boot method, and change it to "static". Provide a static IP address that is on your LAN's subnet.
For example, if you are using an AirPort Extreme, you might give it an IP address of 10.0.1.100. If you are using a Netgear or Linksys router that defaults to issuing 192.168.x.x addresses, you might give it an address of 192.168.1.100. That way, the printer will always "reside at the same address" on your network. If your router has the ability, you should reserve that address so that the router does not attempt to assign it to another DHCP device.
Then, go to System Preferences > Print & Scan, and delete your existing printer with the "–" (minus) button. Add it again, using the "+" (plus) button. In the window that appears, select the IP pane, and from the Protocol menu select "Line Printer Daemon (LPD)". In the Address field type the IP address you gave your printer.
If all goes well the "Pring Using" field will detect the printer at that address and automatically select the appropriate driver. You will see something similar to the following screenshot ("name" can be whatever you decide, and "location" is optional):
Click Add, then you can close System Preferences.
There are other possible reasons your printer is "not responding" which could include wireless interference from competing wireless networks, but try this "static IP" method first. It should mitigate the problem. -
I have OS 10.8.2 and use wireless at home just fine.
When I visit a friend with only a cable modem internet my Mac Book Pro will not connect.
I see that the Mac Book Pro is picking up the internet when I check the internet preference section but it will not open Safari.
What do I need to do connect via a cable modem?You need to power off the modem for 15-30 seconds, then power back up and then connect. The modem is remembering the last connection (your friend).
-
The Mac Book pro is not charging. The led is green with the connection and the computer is not charging. Thank you for the help
Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
If this does not help, contact Apple.
Best. -
Hi I have just bought a mac book pro 2ghz 8gb ram with haswell.also it's running maverick. I am wanting to start using logic but does it work ok with maverick everything I read says it's no good please help
Which version of Logic? I have 9, but I've yet to install it. I'm just creating the images of the disks atm to install them on my Haswell. Will let you know how that performs.
Logic 10 would most certainly work fine though. -
My Mac book pro keeps saying "connection time out occurred" I have a 2011 pro with all the latest updates. It keeps doing it and it really annoys me! Please help!
Take each of the following steps that you haven't already tried, until the problem is resolved.
Step 1
Restart the router. Many problems are solved that way.
Step 2
Change the name of the wireless network, if applicable, to eliminate any characters other than letters and digits. You do that on your router via its web page, if it's not an Apple device, or via AirPort Utility, if it is an Apple device.
Step 3
From the menu bar, select
▹ System Preferences... ▹ Network
Click the Assist me button and select Assistant. Follow the prompts.
Step 4
Back up all data.
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
Enter the name of your wireless network in the search box. You should have one or more "AirPort network password" items with that name. Make a note of the name and password, then delete all the items. Quit Keychain Access. Turn Wi-Fi off and then back on. Reconnect to the network.
Step 5
You may need to change other settings on the router. See the guidelines linked below:
Recommended settings for Wi-Fi routers and access points
Potential sources of interference
Step 6
Make a note of all your settings for Wi-Fi in the Network preference pane, then delete the connection from the connection list and recreate it with the same settings. You do this by clicking the plus-sign icon below the connection list, and selecting Wi-Fi as the interface in the sheet that opens. Select Join other network from the Network Name menu, then select your network. Enter the password when prompted and save it in the keychain. -
I have microsoft outlook installed on my Mac book pro, I can only use the outlook with the office server where it was setup, outlook won't work out of office, is there any way I can reset the settings in order to be able to use outlook every where?
I can see my folders by clicking the X next to my name on the Inbox Folder. So I have my folders now, just cannot see them in the left colum or see multiple windows on Outlook. At this point, I can use the folders, just with limited functionality. Thanks -Gina
Maybe you are looking for
-
Is there a limit to number of devices you can simultaneously sync to one itunes account?
Is there a limit (set by itunes or elsewhere) to the number of devices you can simultaneously sync to one itunes account/PC/Mac? Using USB hubs or other sync/charge devices?
-
System won't start - Error 0xc000014c and System Repair fails to work.
Hi, I am running Windows Vista Home Premium x64 on my Dell Inspiron 1520 Notebook and I had to force shut down the computer yesterday because it was unresponsive (Programs wouldn't execute, shut-down didn't work). When I turned it back on I got an er
-
Stored Procedure returning just one row
Hi! I've a problem with a MSSQL Stored Procedure. This procedure works perfectlly if I execute it directly on MSSQL Query Analyzer. But the problem is in Java, when I call it, the resultset has just one row, and it must have 59, so I don't know what
-
After installing arch linux I noticed laggy responce with the console. For instance, when I type ls in my home directory it'll sometimes take 2-5 seconds before it'll list the contents. Is this because it's using reiserfs or devfs? I assumed they
-
User Name field in fbl3n, fbl1n, fbl5n
Hello, How should i add user name field in fbl5n / fbl3n / fbl1n? Thanks