My macbook pro is frozen, the mouse moves, but it will not click. I have restarted and it is still the same... Can anyone help me ?
my macbook pro is frozen, the mouse moves, but it will not click. I have restarted and it is still the same... Can anyone help me ?
Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, or by corruption of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.
Similar Messages
-
I inherited a 2003 ipod from my daughter. The controls will not work when it is plugged into a power source. Can anyone help?
But they work normally when not plugged in? What kind of power source are you plugging it into? It maybe outputting more than what the iPod can handle. I had this happen to an iPod I plugged into a powerstrip that was plugged into the cigarette lighter in a vehicle an experienced the same thing.
B-rock -
My e-mail, exchange account, on iphone, displays an out of date signature. My Outlook displays the correct signature but this does not appear to have replicated to my iphone. The standard signature still says "sent from my iphone" which is fine but I need desperately to change the exchange signature as the office address is incorrect.
I have already tried that and this doesn't work. The signature is pulling incorrectly from exchange but I don't know how.
-
My MacBook Pro stated that it needed to be updated. I clicked yes to restart the computer and update but when it restarted it stays on the gray screen with the apple logo and then pops up, stating "unable to find driver for this platform." What do I do?
Boot into Recovery by holding down the key combination command-R at the startup chime. Release the keys when you see a gray screen with a spinning dial.
Note: You need an always-on Ethernet or Wi-Fi connection to the Internet to use Recovery. It won’t work with USB or PPPoE modems, or with networks that require any kind of authentication other than a WPA or WPA2 Personal password.
When the Mac OS X Utilities screen appears, follow the prompts to reinstall the Mac OS. You don't need to erase the boot volume, and you won't need your backup unless something goes wrong. If your Mac didn’t ship with Lion, you’ll need the Apple ID and password you used to upgrade, so make a note of those before you begin.
Don't install the Thunderbolt update -- it's defective. -
I just bought a new Retina Display macbook pro, and I plugged in my iPod touch (4th gen) into the new computer, but it will not show up, even after I typed in the passcode. How do I get my iTouch to sync with my new computer without restoring my itouch?
iOS: Device not recognized in iTunes for Mac OS X
-
Hi there, i've just updated safari 5.0.6 for my macbook pro (os x 10.5.8), but i've not been able to install any programs from the safari extension gallery. Appreciate any advice?
but i've not been able to install any programs from the safari extension gallery
In order to use the Safari Extensions Gallery you need to upgrade to Snow Leopard v10.6
See system requirements here: http://www.apple.com/safari/download/
If you want to upgrade to v10.6, make sure your Mac meet's Snow Leopard's - Technical Specifications
Purchasing available here > Mac OS X 10.6 Snow Leopard - Apple Store (U.S.) -
After waking from sleep, my iMac (Lion) is unresponsive. The mouse moves, but when I click things it won't open them.
This has happened EVERY time the iMac goes to sleep for the last few days.. the only way I have found to resolve the issue is to manually restart the computer each time via the button on the back of the iMac.
Any and all help is appreciated!
ThanksFWIW, I never sleep my machines or their HDs, just their displays and never have an issue waking up the displays, usually run 24/7. Give that a shot.
-
i want to change my apple id on my macbook pro in the user info. it ask for a password...i am typing in my password to the apple id but it will not accept it....how to solve it ?
I'm afraid that you may be confusing two different 'passwords' - there's your Apple ID (the user name and password that you used to get into these forums) and then there's your computer user name and password - usually two seperate user names and passwords.
If you want to change your password for your user account on your computer, go to System Preferences>Users & Groups and unlock the preference pane. Then you can select your user name and change your password there. Changing a user name is a bit complex and I don't think you want to try that!
Clinton -
Macbook pro to HDTV, video is working but audio is not working, how to make audio work as well
If you use an HDMI cable, the audiostream will be integrated, so there will be sound when using an HDMI cable!
Not necessarily. That only works as stated if you have one of the most recent MBP's that has a built-in HDMI port.
If the MBP only has a Thunderbolt or miniDisplayPort, you need an appropriate adapter cable and even if you use an HDMI adapter or cable to connect to your HDTV there is no guarantee it will carry audio. You have to determine if your specific MBP model supports audio out through its miniDisplayPort or Thunderbolt output, and whether the adapter does likewise. -
I purchased a movie on the AppleTV 2 but it is not showing up in iTunes on my desktop computer. How can I sync? (have lastest version of iTunes and ATV2 software)
Of course it always works, what are you talking about.
I appreciate that re-downloading is only available in the US and then only with certain content. However content that cannot be re-downloaded is not offered for purchase on the Apple TV. -
I am having problems using mov files imported into a project. I get the message "Not rendered" in the Canvas and clip won't play. Can anyone help?
When clips won't play without rendering in the Timeline, it usually means that the clip's specs don't match the Sequence settings.
A .mov file could be made from any number of codecs; the QuickTime Movie designation is merely a container for video files of all kinds. Since FCE only works with the QuickTime DV codec and the Apple Intermediate Codec (AIC) natively, if your mov files aren't one of those two, you need to convert them PRIOR to importing into your FCE project.
-DH -
I have a macbook pro, when I try to open excel it will not open and I get a messages that states "cannot be opened 1712.
What version Mac OS X?
What version Excel? -
I purchased a movie on iTunes, but it will not play on my Apple TV1. It says the Apple TV is not authorized to play this content.
Annoying isn't it.
This seems to have started at the end of October and may be some kind of 'authorisation expiry' on the original unit that needs updating.
Solution include:
Purchase something on the AppleTV1 itself with DRM (a free TV Show episode might be an idea if yiou can find one).
Remove the connection to itunes by removing the iTunes library from AppleTV's Computers>Settings menu, then add it back again.
Remember this will wipe synced content from the AppleTV if AppleTV1 is syncing (My Movies/TV Shows etc) as opposed to streaming (My Shared Movies etc) from that itunes library. In theory direct purchases on AppleTV that have never transferred to itunes might survive the 'wipe for a clean slate for a new sync' process that happens when you remove a sync library but don't risk it and right click on the AppleTV Device in itunes, choose Transfer Purchases if there are any prior to resetting the AppleTV Computers entry and readding the library. If AppleTV is streaming only it's very quick to remove the libarry and re-add it as there's nothing to sync when you re-establish the connection - it works I've done it. Purchasing a protected music video on my other AppleTV1 which was synced also worked.
Good luck
AC -
I am trying to load my library on the new computer but it will not let me import. when i shut off the old computer the shared library disappears.
Yeah... that's exactly the way it is supposed to work. Sharing the library does not move it anywhere.
To move the library to the new computer, copy the entire iTunes folder from the old computer to the new computer. -
I rented a movie but it will not play.
I rented a movie but it will not play. I get a message saying there is a problem and then iTunes shuts down. The help screen then says to download the latest version to avoid this problem, but I already have. What do I do to be able to watch the movie I rented?
Try the following user tip:
iTunes for Windows 10.7.0.21: "iTunes has stopped working" error messages when playing videos, video podcasts, movies and TV shows
Maybe you are looking for
-
Why am I being charged for a tablet that was supposed to be free?
When I purchased my newest phone last month, I was offered a free tablet. I was told I would have to pay the activation fee of $35 but after that there would be no additional charges as we had qualified for some type of deal based on our account stan
-
How to call a secure external Web Service using Oracle BPEL and OWSM
Hi, i have to invoke an external secure Web Service using SOA Suite 10.1.3.1, but i don´t know how to do this. Do i use OWSM gateway or Agent? how to configure the gateway or agent to pass the required security to the external secure web service. tha
-
Update contacts feature in Facebook iOS 6 not working properly
Hi! I've been using the Update All Contacts feature in syncing my phonebook with Facebook. The feature worked for a time but it stopped and I'm not able to update my facebook friends in my Facebook. I tried manually syncing them by adding their @face
-
Double Invoice Check Failed-Trax FB60/FB65
Dear Sap Gurus, When iam posting invoice by using FB60 it is allowing duplication.iam able to post two invoices with same data.system is not giving any error. how to get error messages. i have done all necessary settings 1.vendor master double invoic
-
How to add new elements in an array of Objects of Type Figure??
I have a Figure class which has many attributes(variables). Then I create an array of Figures for example Figs[] figures = new Figure[18]; Later I need to add new Figures to this array at different positions. In my case I have to use the same array.