My Macbook Pro OS 10.7.5 will not recognize toshiba hard drive.  I will register on an iMac running the same OS.  Any ideas?

I have a Toshiba external hard drive that i used with MacBook.  I now have a MacBook Pro running OS 10.7.5.  It does not register that the Toshiba hard drive is plugged in, yet if I plug it into an iMac running the same OS it does work.

I don't know the answer to your problem, but until you resolve it do not upgrade OS X.
I would suggest you try a reinstall:
Reinstall Lion, Mountain Lion, or Mavericks without erasing drive
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu.
Reinstall Lion, Mountain Lion, or Mavericks
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
     Note: You will need an active Internet connection. I suggest using Ethernet
                 if possible because it is three times faster than wireless.

Similar Messages

  • System Profiler will not recognize installed hard drive if drive is in use by VMWare

    System Information will not recognize installed Hard Drive (Boot Camp) when in use by VMWare.
    I work in IT for a School District and I am creating a Script that system information about the computer. I am testing this on a Mac Pro with two internal hard drives. One drive is Mac OS 10.8 and the other drive is a Boot Camp Drive that is used by VMWare Fusion.
    When I run System Information via the GUI or system_profiler via Terminal, both drives show up just fine. However, if I launch VMWare Fusion and run Windows from my Boot Camp drive, then run System Information via the GUI or system_profiler via Terminal, the Boot Camp Drive is no longer listed as an installed drive.
    Example:
    In the Terminal, I enter the following command.
    system_profiler SPStorageDataType
    Then it returns this information.
    Storage:
        Lion Client:
          Available: 217.84 GB (217,836,306,432 bytes)
          Capacity: 639.28 GB (639,275,270,144 bytes)
          Mount Point: /
          File System: Journaled HFS+
          Writable: Yes
          Ignore Ownership: No
          BSD Name: disk0s2
          Volume UUID: CCB501BF-AF24-30E7-A938-5A4E52DF14D7
          Physical Drive:
              Media Name: WDC WD6400AAKS-41H2B0 Media
              Medium Type: Rotational
              Protocol: SATA
              Internal: Yes
              Partition Map Type: GPT (GUID Partition Table)
              S.M.A.R.T. Status: Verified
        BOOTCAMP:
          Available: 255.58 GB (255,575,560,192 bytes)
          Capacity: 319.79 GB (319,790,510,080 bytes)
          Mount Point: /Volumes/BOOTCAMP
          File System: NTFS
          Writable: No
          Ignore Ownership: Yes
          BSD Name: disk1s2
          Volume UUID: D4B39D4E-E244-403C-AE4D-4D58397130DE
          Physical Drive:
              Media Name: WDC WD6400AAKS-41H2B0 Media
              Medium Type: Rotational
              Protocol: SATA
              Internal: Yes
              Partition Map Type: GPT (GUID Partition Table)
              S.M.A.R.T. Status: Verified
    Then I launch VMWare, which uses the Boot Camp drive. The once again run the same command from the Terminal Command and I get this.
    Storage:
        Lion Client:
          Available: 213.39 GB (213,392,244,736 bytes)
          Capacity: 639.28 GB (639,275,270,144 bytes)
          Mount Point: /
          File System: Journaled HFS+
          Writable: Yes
          Ignore Ownership: No
          BSD Name: disk0s2
          Volume UUID: CCB501BF-AF24-30E7-A938-5A4E52DF14D7
          Physical Drive:
              Media Name: WDC WD6400AAKS-41H2B0 Media
              Medium Type: Rotational
              Protocol: SATA
              Internal: Yes
              Partition Map Type: GPT (GUID Partition Table)
              S.M.A.R.T. Status: Verified
    The Boot Camp Drive is no longer listed.
    I assume this is due to the the fact that the drive is "In Use" however is seems odd since the Mac drive is also in use and it appears without problem. I assume there is no "fix" for this, I was just wondering if someone may have an explaination why?
    Also, I do realize that I can query the various interface types like system_profiler SPSerialATADataType to get all the properly installed phycial drives, but then I would have to query all possible interface types, isolate only devices containing Volumes, then consoldate the information to just the information that I need. I was hoping for a cleaner query.

    Thank you for your response.
    VMWare may be the cause, but the actual issue I am having is with Apple's System Information. I anticipated resistance from VMWare if I went to them with a question about an Apple software issue (even though VMWare software is part of the equation). I was trying to avoid the inevitable finger pointing game. I thought I would try with Apple Forums first since the issues presents itself within the Apple Software. However, you are correct that VMWare may have an explanation on why Fusion might be interfering with System Information. I will check with them next.
    To answer your question. Yes, In most cases I do use Fusion to run Windows side-by-side with the Mac OS. However, that is not always the case. There are a few reasons why I have it setup using a Dual Boot configuration.
    One, in some cases, due to the intense programs I occasionally run (graphic applications), I prefer to simply boot straight into Windows via Boot Camp so I may allocate all hardware resources to Windows. Additionally, some graphic applications like to have direct access to hardware and the extra layer of the VM environment can cause problems when an application is trying to directly access specific hardware like a graphics card.
    Second, I often use either side, both Mac and PC, for testing. There is an advantage to not having to rely on the Mac OS to run Windows. If, for whatever reason, my Mac becomes unstable due to testing, I can still jump right into Windows to do work if necessary.
    Third, I love the Mac OS, but I work in a PC centric organization. If there is a "problem" with my system, it is too easy for other system admins to say, "it's because it's a Mac". Having the definitive separation of the OS's allows me to prove that the Mac OS is not a factor.

  • HP dv7 will not recognize second hard drive

    My HP dv7 2185dx running Windows 7 will not recognize second hard drive, bios recognizes it, Intel Rapid storage recognizes it.
    Primary hard drive is a 1TB, in install a second 500GB hard drive.
    This question was solved.
    View Solution.

    Hi,
    Hold down the Windows Key and press R.  Into the Run Box type compmgmt.msc and hit enter.  Click Disk Management in the left pane and let the drives load up. 
    Does the 2nd HDD show here?
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • MacBook with Lion will not recognize external hard drive (AMP) that was my backup for older IBook, please help

    I had a IBook G4 and an external hard drive as its back up.
    IBook running something like Snow Lepord, anyway
    I have a Intel Macbook now with Lion, Ive been told here there is a possible confliction between the AMP external harddrive and lion.
    I will say a few times I have for limited time been able to access the drive on the newer MacBook, but then Lion (I think) drops it.
    Any ideas out there?

    Disk Utility sees the drive, finder/desktop doesnt.
    Click on the Desktop->Finder menu->Preferences->General->Show on Desktop->HDs and ext HDs.
    Mac OS Extended (journaled) what's that mean and is the format the issue here?
    http://support.apple.com/kb/HT1604 and http://support.apple.com/kb/HT2355
    No, that's not the issue.

  • IMac 400dv will not recognize new hard drive installed

    Hi,
    I had been having trouble with my iMac 400dv's hard drive. I had posted the problems I was having and had gotten some very nice feedback. The final decision was to install a new hard drive and battery.
    I purchased a refurbished 40GB Maxtor to replace my old 20GB. Installation was no problem except that my iMac will not recognize the new drive. If I reinstall the old one, it recognizes it right away, so I know it has been installed correctly.
    I took the new hard drive back to the store and the tech said that it wasn't set on the "Master" position. He set it and tested the drive and said that it was fine. I reinstalled and get the same result, no drive can be sellected to install the software. No matter where I set the pin, I get the same result. I called the phone help line (MicroCenter) and the new tech told me that the drive was too big for my mac, which makes no sense to me since they suggested I buy a 100GB in the 1st place.
    I have 1GB of memory, my installation disk if for 8.6 and I will bring it up to 9.2 if I can get it running again.
    Any suggestions?
    thanks,
    Lucy

    Lucy Rust...
    In my opinion no Macintosh user should attempt to install a refurbished HD under any condition. Especially any HD that is to be bootable as they are no longer reliable for the Mac.
    Master setting is a must for the HD and never tinker with an optical setting. Well, if you could mess with the optical setting, expect to do some micro-surgery.
    You should be good for a HD up to a capacity of 120GB. The threshold is somewhere around 137GB but you will not find such odd capacity on the market.
    I think the rest has been covered.
    ...Ron

  • Will not recognize internal hard drive

    I have a strange problem with a 2009 MacBookPro.  It started acting "strange" for the user over the past few months.  By "strange" I mean it would freeze, or fail to boot, or sometimes even restart without any reason.  Now, it gets even stranger.  Tried the standard things,  RAM reseat, replace, check for loose connectors etc.  It would fail to boot when the hard drive was connected internally.  Then it would give a kernal panic and fail to even recognize a hard drive as being installed.  Did a PRam reset, SMC reset and even the power off/control key to try to reset the open firmware.  No sucess with anything.  This is a suystem with an internal battery.
    Yet, when using this exact same hard drive on an external USB drive connection, it would boot fine.  Next tried it in Terminal mode to boot up another MBP.  Failed to boot.  When the 2nd MBP was booted from its internal drive and the suspect machine was plugged in as a Firewire (Terminal mode on "strange" computer) an External Firewire Drive appeared on the desktop, then a few seconds later, an identical copy of the first Ext FW drive appeared.  This went on with evenbtually six copies of the one single Terminal booted hard drive appearing on the desktop of the second computer.  None of the six drives would open or even allow any indiccation of what they contained.
    Tried to partition the hard drive when it was put back into the internal slot but it would not unmount and failed to partition.  The same thinmg happened when trying to erase it.  Connected the hard drive via USB to a Windows 7 machine and used it to erase both the Recovery and Main partitions from the ard drive.  Both were erased but the EFI partition could not be erased or cleaned.  Put this same hard drive, as an external USB, into a very old XP machine and there the EFI partition was removed when a "Clean" command was sent via command line.
    I then took the, now totally erased hard drive, and put it back into the computer as an internal drive and booted the computer from a 10.8 USB stick so I could partition the now empty hard drive.  The drive was not even recognized as being present.  Did the same thing, but using the USB external connection for that same hard drive.  It partitioned and then formatted with 10.8.1 (what was on the USB stick).  After the OS was installed, the computer would boot using this newly created OS when connected as an external USB drive.  Put the drive back in as the internal drive.  Got a Kernal Panic.  Forced shutdown and retried.  Noi kernal Panic but drive was not even recognized.  Pulled the drive from internal and put it back into the external USB and tried booting.  System would not recognize the drive as even being present.
    I then erased and cleaned the drive in the XP machine again and then, using the USB connection on the second computer reinstalled 10.8 from the USB.  When I tried the now newly created software again, the same thing happened as listed above. 2nd machine booted fine on the drive as a USB, "Strange" machine booted fine using the drive as an external USB, Kernal Panicked then would not be recognized in the "Strange" machine.
    It appears that when the drive is connected internally. it not only does not have the OS software recognized but will rewrite something in the drive that makes it impossible to be recognized by any Apple.  My first thought was that the EFI partition was corrupted somehow so that was why I tried cleaning the EFI partition along with the other two partitions.  But even with a new EFI and other partitions, the drive was not useable once it was used to try to boot as an internal drive in the suspect computer.
    Now here I am dropping into speculation mode.  My guess is that something in the very basic ROM (Pram?) that recognizes a hard drive is in the internal slot and tries to get to the EFI instead fails and in the process it screws up the EFI (or maybe even an address table?) in the hard drive.  If it recognizes that there is no internal hard drive, it will happily boot from either a USB stick, a USB connected external hard drive or a Firewire/Terminal mode computer connected to it.
    Sounds like a motherboard problem but I am wondering if it is possible to "flash" the very basic ROM that is at the start of the process back to factory default or maybe just replace the chip if it is the same one used as part of the Firmware password protection system.
    Anyone have any other ideas or thoughts about possible solutions or at least a way to definitely identify what the problem's cause?

    Answer has been found.  The internal drive SATA cable was replaced and the system is now working correctly.

  • I want to set up Time Machine for my Macbook pro but I already have files on my seagate hard drive. Will i lose them if i set up time machine on it ?

    So i have a 2 TB Seagate time machine. I had an older laptop that I had transfered things from onto that about 2 years ago. My current macbook has been acting up so i want to set up time machine. Will i lose everything on the hard drive if i try to set it up as time machine now?
    I read about partioning it.. but Im still scared i will lose what is  on it?
    My macbook is about 2 years old running OS.X 10.9.1
    Please advise.

    Partitoning can be done on the fly.
    However TimeMachine works best if it is Partition 1.
    If you formate and repartition then yes you lose everything.
    How about getting another drive.

  • Old hard drive broke, Macbook will not recognize new hard drive

    Hi,
    My Macbook wouldn't boot, hard drive was making an odd sound, only would go to the gray/blue screen with the flashing ? folder. I bought a new hard drive and installed it, used Leopard DVD to boot, went to Disk Utility and the only thing that showed up was the DVD. I tried re-seating the drive and still nothing.
    Any Suggestions?

    Hey hauebj01 and welcome to the forum -
    I know it's a hassle but I've heard of some folks having quite a bit of trouble seating replacement drives. You might try that again. Sometimes you have to push harder than you think you should. Make sure that nothing is obstructing the connection.
    Also, the drive may be bad. If you have an external enclosure, you can see if you get the same result with it in there.
    By the way, which HDD did you purchase?
    -GDF

  • Firefox opens at my Home Page but then freezes and will not close unless I shut it down through Task Manager. Running Windows 7. Any ideas ?

    All websites work OK through Google Chrome so I am sure this is a Firefox issue. It was fine until yesterday and I have run AVG, Malware and CCleaner with no significant results. It's also a bit odd as Google Chrome doesn't seem to want to let me import my Bookmarks from Firefox either. Any ideas anyone ??

    Hey, these are the instructions on how to try safe mode. Please post back with your results.
    '''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that turns off some settings, disables most add-ons (extensions and themes).
    If Firefox is open, you can restart in Firefox Safe Mode from the Help menu:
    *In Firefox 29.0 and above, click the menu button [[Image:New Fx Menu]], click Help [[Image:Help-29]] and select ''Restart with Add-ons Disabled''.
    *In previous Firefox versions, click on the Firefox button at the top left of the Firefox window and click on ''Help'' (or click on ''Help'' in the Menu bar, if you don't have a Firefox button) then click on ''Restart with Add-ons Disabled''.
    If Firefox is not running, you can start Firefox in Safe Mode as follows:
    * On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
    * On Mac: Hold the '''option''' key while starting Firefox.
    * On Linux: Quit Firefox, go to your Terminal and run ''firefox -safe-mode'' <br>(you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
    When the Firefox Safe Mode window appears, select "Start in Safe Mode".<br>
    [[Image:Safe Mode Fx 15 - Win]]
    '''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
    ''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
    When you figure out what's causing your issues, please let us know. It might help others with the same problem.

  • Just updated to my macbook pro to 10.8.2. ical not synching with my Exchange 2010 server. Worked flawlessly prior to the upgrade. Settings set to auto discover. I matched settings of a partner in my who is still using 10.7.1 without issues. Help!

    Just updated to my macbook pro to 10.8.2. ical not synching with my Exchange 2010 server. Worked flawlessly prior to the upgrade. Settings set to auto discover. I matched settings of a partner in my who is still using 10.7.1 without issues. Help!

    Also - my battery has been telling me "service battery" for a LONG time and then it switched to "replace soon" som time ago. Can't really see what this has to do with anything but whatever.
    That could conceivably explain all the problems you're describing. Replacing a Mac's battery should not be postponed since a failed battery will cause other problems to occur. It is also possible that its hard disk has failed, which means the information on it may soon become unrecoverable.
    ... my latest TM back up was from April 2014, can I just run this when I have rescued everthing and then it might not be as slow?
    If that Time Machine backup remains intact, it may be the only viable means of recovering that Mac's information. I suggest you do not attempt to restore its contents to your ailing Mac.
    Given that you are having trouble creating a newer Time Machine backup you should stop using that Mac immediately and have it serviced as soon as you are able. Do not take it to anyone other than Apple or a service facility authorized by Apple, for the very reasons you explained. If there are no Apple Stores in your vicinity search for an Authorized Apple Service Provider using the Contact Us link below. Use one of the options that appear under Contact Apple Support. The language on that page will be different for your location.

  • Got a new Macbook Pro today and I plugged in my WD external hard drive to backup with but it didn't allow me to backup.

    Got a new Macbook Pro today and I plugged in my WD external hard drive to backup with but it didn't allow me to backup. The problem is that now my computer won't show the drive in finder. I can see it in Disk Utility and cannot access it. Help?

    First
    Finder>Preferences>Sidebar>Devices>External disk
    but it didn't allow me to backup
    did you get an error code or error dialog box?

  • HT1661 My mid-2009 MacBook Pro has just died via a painful (for me) hard drive failure. I backed up a good percentage of files recently but not enough to keep me happy.  I need to access the dead drive on the MBP via a 2008 iMac. Best options?

    My mid-2009 MacBook Pro has just died via a painful (for me) hard drive failure. I backed up a good percentage of files recently but not enough to keep me happy.  I need to access the dead drive on the MBP via a 2008 iMac. Best options?
    I have ordered a 800 firewire to 800 firewire cable and am hoping to use the target mode option to copy files from the MBP.
    Is this possible?
    Hope so!
    Any advice and or help would be greatly appreciated.
    Many thanks,
    Neil

    Thanks Ogelthorpe.
    Just bought an enclosure to try that also.
    Hoping the MBP isn't really dead but just feigning death
    Fingers crossed.

  • I see that i have a problem after installing my new hard drive on my macbook pro mid 2009 version. I put a new hard drive, with all of my information from my old drive installed on it, into the computer. but now have the blinking question mark folder

    i see that i have a problem after installing my new hard drive on my macbook pro mid 2009 version. I put a new hard drive, with all of my information from my old drive installed on it, into the computer. but now have the blinking question mark folder. I see that it means that it isn't reading the new hard drive.
    did i miss a step between transferring all of my information from my old hard drive to the new hard drive and installing the new hard drive into the computer. I believe that i installed properly. it was quite easy.
    thanks for your help

    It means there is no bootable system on the drive. If you still have access to the old drive, then I suggest you boot from it then clone it to the new internal drive. Use OPTION boot to boot from the Recovery HD on the old drive:
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
         1. Select Disk Utility from the main menu then press the Continue
             button.
         2. Select the destination volume from the left side list.
         3. Click on the Restore tab in the DU main window.
         4. Select the destination volume from the left side list and drag it
             to the Destination entry field.
         5. Select the source volume from the left side list and drag it to
             the Source entry field.
         6. Double-check you got it right, then click on the Restore button.
    Source means the external old drive. Destination means the new internal drive.

  • My MacBook Pro won't turn on, only a white screen with spinning circle, I've only had it a few weeks! Any ideas what is going on?

    My MacBook Pro won't turn on, only a white screen with spinning circle, I've only had it a few weeks! Any ideas what is going on?

    Mac OS X: Gray screen appears during startup 

  • Been using iTunes for about 2 years on the same MacBook Pro, just opened it and found everthing's gone. It's as if I'd never used it before. Any ideas, please?

    Been using iTunes for about 2 years on the same MacBook Pro, just opened it and found everthing's gone. It's as if I'd never used it before. Any ideas, please?

    Simply restore from your backup.
    You do have Time Machine running, yes?
    Or you use some other backup program?

Maybe you are looking for