My MacBook Pro went off for 30 hours because I forgot my charger and now I am charging it it refuses to turn on and I have been charging it for almost 3 hours , any have an idea on this ?
My MacBook Pro went off for 30 hours because I forgot my charger and now I am charging it it refuses to turn on for the last 3 hours , any have an idea on this ?
Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
Similar Messages
-
hi. my MacBook pro went off without me turnng it off. i tried turning it on again, but it wouldnt come on. i also tried doing the SMC thing, no avail. please any other thing to do ? (This notebook is still very new for anything to be wrong with it).
There is no way I would do the smc thing with a laptop that won't come on.If it's new and you're anywhere near an Apple Store, take it in. If it's less than 14 days old you can exchange it. If it's more they'll repair it for you.
-
I just turn my MacBook Pro on after charging it and the mouse was not responding,after carefully closing the it the power went off and not turning on again,really frustrating
Hello Kimo12,
The article linked below provides some useful troublehsooting steps that can help get your Mac powered back on.
Troubleshooting: My computer won't turn on
http://support.apple.com/kb/TS1367
Cheers,
Allen -
My MacBook Pro shut off three times yesterday after plugging my phone in but I managed to switch it back on each time. I left it to rest for about 20 hours and then today it Has been working fine all morning. Using indesign and Skype which usually slow it down anyway but it's been fine. Then I plugged my iPhone 4S into it and it just shut off again. But this time it won't switch back on. No idea why this has happened but I hadn't saved my work either. I'd not long plugged the charger in to it but now, it's still plugged in, but the light on it is very dim and is just flashing.
No idea what to do. Please help!You have 10.6 on that machine, I suggest you stick with it for performance, third party hardware and software reasons as long as possible.
Consider 10.8 (not 10.7) when it's released, because 10.7 and 10.8 will require a new investment in software and newer third party hardware as it requires newer drivers the old machines won't have. (forced upgrade because of software, really nice of them)
http://roaringapps.com/apps:table
Far as your Safari problem do these things until it's resolved:
1: Software Update fully under the Apple menu.
2: Check the status of your plug-ins and update (works for all browsers) also install Firefox and see if your problems continue. You should always have at least two browsers on the machine just in case one fails.
https://www.mozilla.org/en-US/plugincheck/
Flash install instructions/problem resolution here if you need it.
How to install Flash, fix problems
3: Install Safari again from Apple's web site
https://www.apple.com/safari/
4: Run through this list of fixes, stopping with #16 and report back before doing #17
Step by Step to fix your Mac -
Hi. When I inserted the DVD into my Macbook Pro I could not play because it required to choose region????? So I could not make it. If you have any idea please let me know. Many thanks.
Look at this link http://en.wikipedia.org/wiki/DVD_region_code
http://www.askdavetaylor.com/how_to_set_dvd_region_macbook_pro_mac_os_x.html
Cheers, Tom -
I have an iphone and i was sending a multimedia message and all of a sudden the phone turned off and will not turn back on. We have been charging it for almost half an hour or more and it still hasn't turned on. How do we fix it?
Wine, were you charging over the USB Connection or AC Power? We've found in our organization that at times not enough power is generated over USB to recharge it in situations like this...I quote from the email of a fellow technician that i just received today...
I’ve had a couple of users up here bring their iPhones to me so dead that the phone was unresponsive, no matter what we did. One thing that many people do not realize is that the iPhone (iOS devices in general) have power management in them. The power management appears to be set up so that the device will not power on at all until the battery is at a certain minimum level. If the user will plug the device into the power adapter, not a USB port on a computer (laptops especially), and leave it for about an hour, maybe longer, the device will come back to life.
The reason I say they have to use the power adapter is because the USB port is not high enough power to bring the charge up fast enough for the battery to come back out of “hibernation”.
Each time I have had the users do the power adapter plug in, and leave it for a couple of hours, the devices have come back to life
Hope this helps -
I have an old iphone and have a new one as well. I would like to use my old on as an ipod but itunes not longer recognizes it. Any ideas? I have been using it for a month with no problems until tonight. I restarted my computer..still no fix.
Looks like its fixed. I am syncing it now. A lot of the answers are for the new iphone so i had to mess with a bunch of settings as well. My old phone is now an 8 gig ipod. the books app no longer works and that *****.....but better than nothing...
-
I am unable to get my iPhone 4s to connect with my JBL Flip speaker via bluetooth anymore. I have been using it for 2 months and now it just wont find device. Any ideas?
Where exactly did you buy this phone?
Have you tried contacting your phone carrier to activate the phone?
Do you have a sim card? -
I have been buying apps for a long time without a problem using my credit card on file. All of a sudden itunes is not recognizing my card which is in good standing. All the info is correct but itunes/apple says it doesn't match the bank info. Any ideas?
Answered in your Other post on this Topic...
https://discussions.apple.com/message/24053626#24053626 -
I have an iPhone 5 unlocked. I have been using it for few weeks but 4 days ago I turned it off and in the morning it had NoService. Called tmobile and apple costumer services no one helped. Did any one had this issue
If you got the Unlocked message it means it was successfully unlocked by AT&T. Apple will not relock or block it. They have no objections to it being used on T-Mobile. It is still under warrantee. Take to an Apple store. They can test it with a SIM from AT&T. If that doesn't work have them replace the phone. Have them verify that the new phone is unlocked. If it does work with the AT&T card then it is a T_Mobile problem.
-
Any idea why a 3 month old Ipad will not turn on? It has been charged and I haved tried the sleep/mute button and the on/off button on the front. Nothing is
happening. It was working fine last nigh?1. Hold both the Sleep/Wake and Home button down together
2. For 10 to 15 seconds
3. Until you see the Apple logo
4. Ignore the red slider
Note: Repeat it if it doesn't work the first time -
something has gone wrong with my external hard drive after my macbook battery went off.. now i cannot paste or create new folder. Does anyone know how to fix this?
Bus powered external drive?
Backups?
Does Disk Utility can see and repair the drive or not?
Also try here in future: MacBook Pro -
Issues With MacBook Pro Shutting Off
I have been having troubles the past couple of days with my MacBook Pro shutting off when running on battery power.
MacBook Pro OSX 10.4.11. 2.16 Intel Core Duo. 1 G Ram.
I will have plenty of battery charge and then "poof", computer just goes black and has no power. It does turn back on, but gets annoying. Everything runs fine when plugged into the wall.
Anyone have any ideas of what may be causing this?
Thanks.How old is your machine? This sort of thing is covered under warranty (or apple car). I got a new one about a year ago that way. Apple WILL ask for number of charge cycles. Believe it or not, high numbers can be good because it says that you have actually been using the battery and it's not just dead from sitting unused.
It sounds like you have a dead cell. Your battery is separated into several compartments. Your charge looks fine until that cell is actually needed. At that point, CLUNK. Nothing works. -
MacBook Pro shuts off immediately after startup
My MacBook Pro shuts off immediately after I start it. It gets to the Apple logo on the grey screen and it shuts down. I have tried launching it in safe mode, resetting the NVRAM settings, nothing works.. Has anyone witnessed similar problems ? What can I do to fix this problem ? Help is gladly appreciated.
Reinstalling OS X Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Reinstalling OS X Without Erasing the Drive
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility and press the Continue button. After Disk Utility loads select the Macintosh HD entry from the the left side list. Click on the First Aid tab, then click on the Repair Disk button. If Disk Utility reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit Disk Utility and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Also see:
Reinstall OS X Without Erasing the Drive
Choose the version you have installed now:
OS X Yosemite- Reinstall OS X
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless. -
My macbook pro shuts off randomly?
So my MacBook Pro has shut itself down twice in the past two days. It shuts off randomly, takes about 45-60 seconds before I can turn it back on, and when I turn back my date and time settings are way off (ie the most recent time it said that it was Monday, November something, 2012, at 4:02 pm, when it was really Wednesday January 21, 2015, and 5:25 pm). I have a frayed charger cable, and it has been plugged in during both shutdowns. I have a new one on its way, but I cannot stop using this one yet, because I am a college student and I need my laptop, and none of my friends/roommates has a MacBook with the proper charger for mine, so I can't use any of theirs. Any explanations?
Hello pinkpanda376,
For random shut off issues, I would take a look at resetting the SMC on your MacBook Pro as well as taking a look at the battery to make sure that it is still running normal on you. Look at the articles below for more information to get you started.
Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/en-us/HT201295
Mac notebooks: All about batteries
http://support.apple.com/en-us/HT204054
Take it easy,
-Norm G.
Maybe you are looking for
-
Hi, I've imported alot of video in Aperture, converting with handbrake and I can view it fine. My problem is the archaic viewing options that come with Aperture. It's very difficult to make the slider go back or forward. I like to watch my kids sport
-
Can any body plz tell me the solution for IDOC Import
When iam trying to import the IDOC --> PREQCR.PREQCR02 to my imported objects in Integration Repository by using Application Server, system number and user name and password, the following error iam getting.
-
Hello Experts, We have our JDI on admi1 server (6.40). We made a system copy of admin1 java +abap stack in order to create a support path. (admin1 we are plannign to upgrade, admin2 will be our support path in downtime) Basically we are trying to mi
-
Are there any STP sound effects usage restrictions?
Are the sound effects in STP free to use? Like could I use them in a feature film if I wanted? A website? Anything? I'm not asking about other companies- I'm talking specifically about the sound effects that come with STP. Thanks!
-
Mapping SAP R3 role to EP role for WD ABAP Application
Hi, I have a WD ABAP application which uses POWL component. I have assigned this application to a role in SAP R3 system. Now, I have created an iview in portal for this WD ABAP application. I want to map this SAP R/3 role to Portal Role so that only