My macbook wont turn on. its a total black out even the led light on the charger has no light. its a total blackout.

my macbook wont turn on. its a total black out even the led light on the charger has no light. the battery indicator has no light its a total blackout. if you pressed the power button theres no light at the bottom. nothing at all even the spin you cant hear anything. blackout as in

Try resetting the System Mangement Controller -> http://support.apple.com/kb/HT3964.
If that has no effect, then your only recourse is to take your machine to your local Apple Store/AASP and have them run diagnostics on the machine.
Good luck,
Clinton

Similar Messages

  • My macbook wont turn on. It just get stuck on a white page with the apple logo. WHen I tried rebooting it there was an error in the loading drivers as well as safe booting it. What should I do?

    What should i do

    Insert the install disk and boot from it. Use disk utitlity to repair your drive and check for errors (report any errors back here) then reinstall the os. This should not erase your data.

  • My MacBook wont turn on.....it just makes a beeping noise?

    My MacBook wont turn on and it keeps making a beeping noise?

    it just makes a beeping noise?
    Most likely the RAM.
    Help here >  Power On Self-Test Beep Definition - Part 2

  • HT2341 When I first attempt to power on my MacBook Pro, the LED blinks but the MBP doesnt turn on. However when I try a second time the LED blinks but my Mac turns on. Is this a problem with the hardware and can it be fixed?

    When I first attempt to power on my MacBook Pro, the LED blinks but the MBP doesnt turn on. However when I try a second time the LED blinks but my Mac turns on. Is this a problem with the hardware and can it be fixed?
    Also, I apparently have to replace my battery. Could the problem have any relevance to a dead battery?

    Have you held the power button down for 10+ seconds?  That should turn it off.
    Ciao.

  • Ipod wont turn on unless I restore it and even if I do it turns off after few hours and wont turn on again unless i restore it again?

    ipod wont turn on unless I restore it and even if I do it turns off after few hours and wont turn on again unless i restore it again?

    Are you restoring the iPod from a previous back or to factory settings? If you haven't restored to factory settings yet, I would do that next.  And if the problem still continues, it's most likely hardware related, in which case you'll want to schedule an appointment at your local Apple Store/Genius Bar to have them take a look at it.
    B-rock

  • I have recently received a pdf file that, although previously opened, now shows totally blacked out?  What can I do to correct this?

    I have recently received a pdf file that, although previously opened, now shows totally blacked out?  What can I do to correct this?

    Hi rdfnra,
    Please check the Page Display preferences (File > Preferences/Acrobat > Preferences) and make sure that Show Large Images is selected. If sounds as though this PDF may have been created from a scanned document, and this preference is disabled.
    Please let us know how it goes.
    Best,
    Sara

  • My friend called me on my iphone4, when i took the call, it was only a very annoying sound so i cut it off, then suddenly i was totally black out. what will i do??

    my friend called me on my iphone4, when i took the call, it was only a very annoying sound so i cut it off, then suddenly i was totally black out. what will i do??

    Try a reset by holding both the home and the on/off buttons until the apple logo appears, and let it reset

  • Help mine macbook wont turn on

    can some one help me because every time i touch the button to turn it on. the light just blink it wont turn on its just stay off

    Do you hear any beeps or does the light flash in a sequence of 1, 2, 3 or four flashes with a five second pause between flashes? If so check this Apple article https://support.apple.com/kb/HT1547

  • Macbook wont turn off completely!!!!!

    Every time a use the macbook pro with the batery and try to turn it off it doesn't do that completely.
    If I close the screen the light indicator is still on. I try to turn it on again it wont turn. Then I press the power button for a few seconds, the system starts but and error message "THE SYSTEM HAS BEEN CLOSE UNEXPECTEDLY" (el sistema se ha cerrado inesperadamente).
    Whats wrong? is a batery problem?
    Do I have to reinstal leopard?
    Please help!!!

    I have the same problem. It doesn't matter if the power is plugged in or not. Please help me decide if it's a software bug or a hardware issue. This crash happens eveytime I try to turn off the computer.
    here is the error log:
    Tue Jul 29 13:01:23 2008
    panic(cpu 1 caller 0x001A8CD4): Kernel trap at 0x7c8bf214, type 14=page fault, registers:
    CR0: 0x8001003b, CR2: 0x006372b4, CR3: 0x00d14000, CR4: 0x00000660
    EAX: 0x54eb10c2, EBX: 0x00636d64, ECX: 0x0050d444, EDX: 0x07542554
    CR2: 0x006372b4, EBP: 0x5c2a7c98, ESI: 0x06a09000, EDI: 0x7c8c13e8
    EFL: 0x00010202, EIP: 0x7c8bf214, CS: 0x00000008, DS: 0x00000010
    Error code: 0x00000000
    Backtrace, Format - Frame : Return Address (4 potential args on stack)
    0x5c2a7aa8 : 0x12b0fa (0x4592a4 0x5c2a7adc 0x133243 0x0)
    0x5c2a7af8 : 0x1a8cd4 (0x46280c 0x7c8bf214 0xe 0x461fbc)
    0x5c2a7bd8 : 0x19ede5 (0x5c2a7bf0 0x6fd0e00 0x5c2a7c98 0x7c8bf214)
    0x5c2a7be8 : 0x7c8bf214 (0xe 0x530048 0x6be0010 0x10)
    0x5c2a7c98 : 0x7c8bd76b (0x7c8c1428 0x6a09000 0x54ec0380 0x3eac3a)
    0x5c2a7cc8 : 0x7c8bd7ee (0x6a09000 0x54ecc6dc 0x6a09000 0x5af10b78)
    0x5c2a7ce8 : 0x40e17d (0x7532f80 0x0 0x6a09000 0x3eb869)
    0x5c2a7d18 : 0x40ed72 (0x6a09000 0x6d1e980 0x0 0x6a09000)
    0x5c2a7d58 : 0x412e9c (0x6a09000 0x647cc40 0x0 0xffffffff)
    0x5c2a7da8 : 0x41304f (0x6be1200 0x7 0x1 0x19a0a74)
    0x5c2a7dc8 : 0x5b0e17b2 (0x6be1200 0x3 0x1 0x6726b00)
    0x5c2a7de8 : 0x5b29ed79 (0x6be1200 0x3 0x693ee04 0x693ee00)
    0x5c2a7e28 : 0x5b29ef15 (0x6726b00 0x5b0fb224 0x1 0x5b139360)
    0x5c2a7e68 : 0x5b29ae0c (0x6726b00 0xfea75ab8 0x5c2a7ed8 0x1a7412)
    0x5c2a7ea8 : 0x5b29c9fd (0x6a16000 0x0 0x5c2a7ed8 0x5b0e8d7f)
    0x5c2a7ed8 : 0x416430 (0x6a16000 0x1 0x6a16000 0x6a16000)
    Backtrace continues...
    Kernel loadable modules in backtrace (with dependencies):
    com.baltaks.driver.DoubleCommand(1.6.5)@0x7c8bc000->0x7c8c1fff
    dependency: com.apple.iokit.IOHIDFamily(1.5.2)@0x54e94000
    com.apple.driver.AppleUSBHub(3.1.5)@0x5b299000->0x5b2a3fff
    dependency: com.apple.iokit.IOUSBFamily(3.1.5)@0x5b0d4000
    com.apple.iokit.IOUSBFamily(3.1.5)@0x5b0d4000->0x5b0fbfff
    BSD process name corresponding to current thread: kernel_task
    Mac OS version:
    9E17
    Kernel version:
    Darwin Kernel Version 9.4.0: Mon Jun 9 19:30:53 PDT 2008; root:xnu-1228.5.20~1/RELEASE_I386
    System model name: MacBookPro4,1 (Mac-F42C89C8)

  • TS1365 MY Macbook wont turn on!

    Hey so its my macbook pro. It turns on i get the white screen with the apple symbol and the loading circle. But it pretty soon after i see that screen come on it shuts off. The hard drive seems to start up softer then usual. Any Ideas?

    Reinstall OS X. Unfortunately, you haven't provided any information on what version of OS X you are using.
    Also, you might try the following:
    Resetting your Mac's PRAM and NVRAM
    Intel-based Macs: Resetting the System Management Controller (SMC)

  • Macbook wont turn on After software update

    PPlease help!
    my macbook air 11 wont turn on After software update. The screen completely black . Power button is not responding éven if it is fully charged.
    THank you
    NOra

    Have t you tried a SMC reset?
    http://support.apple.com/kb/HT3964
    It may be helpful if you indicated the EXACT MBA model you have and the OSX.
    Ciao.

  • MACBOOK WONT TURN ON!! PLEASE HELP!

    MacBook which is supplied through my school and wont turn on at all, it justs shows the grey screen and the beachball spinning around for hours. It is and was fully charged. I took it to the IT guys and they said it can not be backed up at all due to it not turning on, but I heard they can take the main "motherboard" out and display it on another screen so that I can then back up all my photos and music? ALL photos from overseas and from the last TWO years are on there and I need it to be backed up!! Any suggestions on what I can do or WHERE I can take it? I live in Australia.

    See this Apple note on steps to take when faced with a grey screen on boot.
    Taking the logic board out to hook up to another system has nothing to do with the data stored on your hard drive.  It's possible they were talking about removing the hard drive to hook up to another system.
    After you get past this issue, consider buying an external hard drive and backing up your system on a regular basis. 

  • My Macbook wont turn on, it gets pasted the White Apple screen then goes to a Blue screen that quickly turns a slightly darker shade of blue with the familiar loading icon then back again and does this over and over. What should I do? please help!

    So today my iPhone decides to go into recovery mode on me randomly so I  plugged it into my Macbook right away, but it wasn't showing up in iTunes so I did a quick internet search as to why that could be. On the Mac support forum I found instructions stating I should make sure I had the current verison of iTunes on my computer, turns out I had been putting off an Update because I didn't like waiting for it to restart n so forth. So I clicked my boucning update friend at the bottom of my screen and it started checking for updates, the bar got maybe a quarter of the way up and then stopped moving all together, I thought something was wrong so I clicked cancel and tried again. The same thing happened so I clicked cancel and went back to the Internet to find more help on my problems. I found yet another forum saying this solution was simple, restart the computer. So i clicked my little apple at the top and pressed restart and that has been the last thing I got to do on my computer because when it restarted it got past the White Apple logo screen and went on to a Blue screen which quickly turned a darker shade and had the loading circle, then back to the previous blue screen, then right back to the darker one. This process it repeated several times and I can't for the life of me figure out what to do. Please someone have a simple answer to this that I haven't Already tried, I have already tried safe mode and it just doesn't work for me. Please please help I need my computer for class it has all my notes and a paper I was doing, not to mention my iphone is still in recovery mode, even when I can get to another computer to fix that I need all the back up files off of my macbook to restore it to what I know it as and not default.

    Reset the PRAM
    Reinstall the operating system from the dvd (you will not loose your data)

  • My macbook wont turn on help!!??

    My MacBook pro shuts down in the middle of me using and went black and when I hit the power button it went to restart but then died again mu mac isn't even a year yet. What can I do?!?!?

    Try my steps:
    What to do if your Mac won’t power on
    First, try plugging in your Mac to allow the battery to charge. If it is not a portable Apple computer, skip this step. Wait a few minutes, and then try powering on the computer.
    Next, try resetting your SMC.
    Resetting the SMC of an Intel-based portable Mac with a battery you should not remove on your own
    Note: This will not delete any data.
    The SMC is responsible for controlling various system functions. None of your data will be deleted by resetting the SMC.
    Shut down the computer by going to Apple () > Shut Down…
    Select Shut Down or allow the computer to shut down automatically.
    Plug in the MagSafe power adapter into a power source and then connect it to your Mac if you have not already done so.
    On the built-in keyboard, press the (left side) Shift (⇧), Control (⌃), and Option (⌥) keys and the Power Button at the same time.
    Release the (left side) Shift (⇧), Control (⌃), and Option (⌥) keys and the Power Button at the same time.
    Then, try resetting your PRAM.
    Resetting the NVRAM/PRAM
    Note: This will not delete any data.
    The NVRAM/PRAM stores information such as speaker volume, screen resolution, startup disk selection, and recent kernel panic information (if any). You should reset the NVRAM/PRAM if you experience issues relating to these functions.
    Shut down the computer by going to Apple () > Shut Down…
    Select Shut Down or allow the computer to shut down automatically.
    Turn on the computer by pressing the Power Button.
    On the built-in keyboard, press and hold the Command (⌘), Option (⌥), P, and R keys before the gray screen appears.
    Continue to hold down the keys until the computer restarts and you hear the startup chime for the second time.
    Release the keys on the built-in keyboard.
    Then, try repairing the disk permissions using Disk Utility.
    Repairing a disk’s permissions using Disk Utility on the Recovery HD.
    Note: This should not delete any information or files from the disk.
    Repairing a disk's permissions can help solve various file-related issues.
    To begin, make sure your external disk that you are repairing is connected to the computer. If you are repairing an internal disk, skip this step.
    Make sure the computer is powered off before continuing.
    Press the Power Button to turn on the computer.
    Press and hold both the R and Command (⌘) keys on the keyboard until the Recovery partition loads. If this does not work, shut down the computer, press the Power Button to turn on the computer, and then hold in the Alt (⌥) button immediately after you press the power button. Then, select the Recovery HD partition to boot up in the Recovery HD partition.
    Select Disk Utility.
    Once you are in the Disk Utility app, select the external drive from the sidebar on the left.
    Then, choose the Repair Disk Permissions button on the right.
    If this does not solve your issues, you may have no choice but to reformat the drive using Disk Utility.
    If that does not work, try reinstalling OS X but not erasing.
    Reinstall OS X
    Note: This will not erase any data on the disk. However, it is highly recommended that you create a backup before continuing.
    Reinstalling OS X can solve various problems such as corrupt system files.
    Shut down the computer by going to Apple () > Shut Down…
    Select Shut Down or allow the computer to shut down automatically.
    Plug in the MagSafe power adapter into a power source and then connect it to your Mac if you have not already done so.
    Press the Power Button to turn on the computer.
    Press and hold both the R and Command (⌘) keys on the keyboard until the Recovery partition loads.
    Select Reinstall OS X and then choose Continue.
    Follow the instructions.
    Then, try erasing and reinstalling OS X.
    Erase and Reinstall OS X
    Note: This will delete all data on the disk. Back up important files before continuing.
    Erasing and then reinstalling OS X can give you a fresh start, making your computer exactly as it was whenever you received it from Apple. This can solve various problems such as corrupt system files.
    Shut down the computer by going to Apple () > Shut Down…
    Select Shut Down or allow the computer to shut down automatically.
    Plug in the MagSafe power adapter into a power source and then connect it to your Mac if you have not already done so.
    Press the Power Button to turn on the computer.
    Press and hold both the R and Command (⌘) keys on the keyboard until the Recovery partition loads. If this does not work, shut down the computer, press the Power Button to turn on the computer, and then hold in the Alt (⌥) button immediately after you press the power button. Then, select the Recovery HD partition to boot up in the Recovery HD partition.
    Select Disk Utility and then choose Continue.
    Select your startup disk (Macintosh HD by default) from the left.
    Select the Erase tab.
    Choose the Format pop-up menu and choose Mac OS Extended (Journaled), enter a name for your disk, and then click Erase.
    After the disk is erased, choose Disk Utility > Quit Disk Utility.
    Select Reinstall OS X and then choose Continue.
    Follow the instructions.
    I hope I helped.
    Austin

  • Help!!! My Macbook wont turn on!!!

    Hi, I just got Macbook yesterday, all working well. I dont know anything about Macs because this is my first machine... was using windows before.
    Well today, after going on it, I shut it down and went up but later tried turning it on... nothing happens...
    Batteries fully charged and when I close screen, sleeping indicator lights turns on...
    I dont have time fixing this as I got to go back to Uni... dam Windows would be much easier...

    Hello Holoon,
    Now, when you say it won't turn on, do you mean it won't boot at all?
    Because my MacBook sometimes will try to boot up, and then after like 2 sreconds it shuts back down. Now how I fix this problem is I have to hold down my power button until the light on the front starts blinking, then it will stop and a high pitch noise will come on for about five seconds, after that the laptop boots. It does boot in single core, which will make the laptop a little bit slower, but it will still run very smoothly.

Maybe you are looking for

  • Problem to send photos par mail

    until yesterday I was able to send photos par email from my iPhone. all of a sudden it doesn't work anymore. I still can send regular emails but I'm not able to send a photo (just from the camera roll). any ideas why? thanks everyone (iPhone 4, 16GB,

  • ReferenceError: Database is not defined

    Is the following syntax correct? Database.ExecSQL("INSERT INTO CRF (TodayDate, SubmittedBy, Region, Market, DoorDepartment, ProjectEvent, ProjectType, RenderingsDue, FinalArtworkDue, EventDate, EventDays) VALUES ('" + TodayDate.rawValue + "', '" + Su

  • How to integrate adobe forms using webdynpro-abap

    Hi All, How to integarte adobe forms with webdynpro -abap(se80). Thanks & Regards Suman

  • Unable Windows Identity Foundation in Windows 10 TP

    Hi all, This question has been asked before but I've yet to see anyone describe the exact steps they have attempted to resolve the issue. Microsoft Dynamics AX 2012 R2 client has a dependency upon Windows Identify Foundation being installed / option

  • Lumia 820 cannot connect to PC via Bluetooth

    Hi there. I have recently bought a new Lumia 820, which is a great phone, except that I cannot connect the Lumia to my PC (win 7) via Bluetooth. I have been using phones with bluetooth for a long time, so this is not my first time. I can see my pc in