My mbp broke  is my final cut pro footage lost

hi i have this problem my mbp broke the screen broke i managed to get the sata hard drive and connect it to the mbp i bought i can see all my files in the hard drive but when i go to the final cut pro x events and project folder and try to open it with fcp x i get an error the original folder is still there but i m unable to open it with final cut so is there a a way to solve or do i have to start the project all over again ? also the old mbp was non retina with lion  but the new one is  with mavericks   does it make a difference i m new i please need  help with this thank you

First of all, you should be able to get everything back.
Which version of FCP X? The current one is 10.1.1, and there are important differences introduced in 10.1, regarding how media and projects are handled.
In 10.1.x, you just need to double-click a library to open it.
If you are still on 10.0.x, then the projects and events need to be on a specific folder in a specific location in the drive.
Projects were in a folder "Final Cut Projects" and events in "Final Cut Events". The important distinction is that in the system drive these two folders were inside the Movies folder, whereas in an external drive they needed to be at the root level of the drive.
Your drive *was* the system drive in the old machine, but is now external. So all you need to do is drag these two folders out of the Movies folder and drop them at the top level of the drive.
There is also the distinct possibility that your old mac had, say, 10.0.9, and your new one has 10.1.1.
If this is the case, then do as explained above to move the folders to the top level. Then open FCP X and do File->Update Projects and Events, and select the external drive. FCP X will create a library with the stuff in the drive.
If you need any more assistance, let us know. When you do, don't forget to mention which version(s) of FCP X you're using.

Similar Messages

  • Which MBP is better for Final Cut Pro?

    Hi Everyone,
    I'm looking to replace my 2010 MacBook Pro 13" on a budget. I'd like to get a retina 13" macbook pro, either the refurb 2012 with 8GB ram and the i5, or the refurb 2013 with 4GB ram, i5 and the new Intel Iris graphics card. Which is better for medium to intense final cut pro, photoshop, and dreamweaver work? Does the Intel Iris card make a big difference or should I be getting more RAM?
    Thanks

    First, check the Model Identifier in your Mac's Apple Menu > 'About this Mac' > 'More info' > 'System Report' > 'Hardware Overview'
    Next, check OWC to find out exactly how much RAM your proposed MBPs can take. Apple gives correct specs at time of development. Later, larger RAM is developed that will work with some Mac models.
    For video, FCPX will use as many processor cores as are available. It will use all 12 cores of the latest Mac Pro. This makes FXPX run very fast. Most other programs don't use multiple cores at all and a few only use a couple of cores. With more cores comes slower clock speed, which is needed by programs that dont use multiple cores.
    Eventually, all high-end programs will use multiple cores, so, if you have the option, get as many cores as you can with your current purchase. This will especially benefit FCPX immediatly, it will help higher-end programs later, and the slower clock speed won't really affect the more run-of-the-mill programs (like word processing) because clock speeds are pretty reasonable these days (for a laugh, read this in fifty years time).
    Get the minimum RAM available because you can upgrade later and will probably have to sacrifice the RAM you have. Third party RAM (again, you can check OWC) is cheaper than buying it with your computer pruchase. Make sure it's designed for your Mac.
    You can use Activity Monitor to check if FCPX (or any program) is paging. You don't want this. It means it is writing to disk—effectively virtual memory—that should be handled in RAM. This is very slow and inefficient. It only does that when it needs more RAM than is available. That's when you upgrade your RAM (which could be immediatly after you buy).
    The single most effective thing you can do to get FCPX to perform better on an existing computer (or any comuter) is to swap your hard drive for an SSD. SSDs read and write so fast compared to even the fastest hard drive that you can do multicam edits in real time without dropping frames. Rendering is a lot faster becuse it writes the render to disk, and so is launching and exporting (or, as Apple insists, 'Sharing'), which also writes to disk. SSDs may seem expensive (they are coming down in price), but the productivity gains are absolutly worth it.

  • Problem with DVI to video adapter on MBP 2.2 (using FInal Cut Pro)

    When I plug an Apple  DVI to video (composite and S video) adapter into the DVI socket the screen reduces its resolution and the higher screen resolutions are no longer available from system preferences. This happens on both my MBPros so is this a fault with the adapter or what ...?   The reason I'm doing this is to have dual display for Final Cut Pro 7 although this behaviour happens withourt FCP running , which is why I ask in this section.

    Setting it to FireWire Basic didn't work. It still only played thru the first few frames, then came back with the same message- that there were dropped frames detected (not bad sectors, as I reported earlier). One other thing I noticed: after the failed capture attempt, it resets the In point to the same time code as the Out point.
    I'm going to try capturing by just clicking Play, then clicking the Capture Now button, and see if that works.

  • Final Cut Pro footage and Canon 5D import

    I am able to drag footage from Canon 5 D Mark 111 media card directly into Final Cut 7.  Previously I remember compressing footage, why does one compress footage, the total media is 8 GB.
    Thanks
    Catherine

    FCP doesn't work well with the native files that camera shoots. Unfortunately is APPEARS like it will, but it won't. Yeah, it'll import fine, and you might begin editing fine, but things will pop up, like a sluggish system, loss of sync while editing, loss of sync when trying to export.
    Do not cut the native H.264 MOV files the camera shoots with. FCP demands FCP editing codecs, and the one you want is ProRes 422. You'll need to use COMPRESSOR for this, as Log and Transfer doesn't support the 5D Mark III.  Now, the bad news is that that 8GB of footage will become about 32-40GB...because the format you are converting to has a higher data rate.  This is unavoidable, if you plan on using FCP 7.  Premiere Pro will cut this format natively...and FCX can, but FCX does still want to "optimize" the media, and by that it means convert to ProREs.
    Gotta convert to ProRes 422 before you import the footage.

  • Final cut pro x lost

    I recently had my Mac laptop cleaned for running slow, however, I had final cut installed bt it's not there now. How to redownload it?

    Use the App Store and search for Final Cut X and you'll find it there, if you didn't use your Apple ID to purchase it, you are going to need to enter the Apple ID and password that you did purchase it with and install it that way.  If you did use your Apple ID to purchase and install it the original time, it will just let you click the download button on the App instead of the purchase button as it has already been purchased.

  • Final Cut Pro x not opening

    NOW after my final cut pro x lost all of my work, now it won't open at all! What is happening here? Good thing this is only a trial because all these errors are making me NOT want to buy this software.

    Thanks Tom. So...to open a previous version of a Final Cut Pro file there is no software that I can buy through Apple currently?

  • Preparing my MBP to run Final Cut Pro

    Hello,
    Apologies if this question has been answered, I've searched for over an hour but can't find what I'm specifically looking for.
    I would like to know what I need to upgrade / increase / expand on my MBP, in order to run Final Cut Pro and work with XDCAM and HDV source material.
    Currently:
    2.4Ghz Intel Core 2 Duo.
    2 Gb 667 Mhz DDR2 SDRAM
    NVIDIA GeForce 8600M GT, 256 Mb VRAM
    From my research I think that I at least need to increase the RAM and get a big external hard disk to store the material.
    Is there anything else I need to do?
    I expect many people will say, buy a Mac Pro but we just don't have the budget! If it takes a long time to render then we just have to live with that.
    Any advice much appreciated.

    As for DIY I can not give you advise, I live in Europe but buying ram at the Apple store is maybe not the budget way.
    I usually look here to install things yourself
    http://eshop.macsales.com/tech_center/installation.cfm
    There are for sure other/better sites but with the MBP installing extra ram is easy,
    A 1TB will be more then enough, I would go myself for 2x500 GB firewire, this gives the option that when a job is finished and you don't need the media anymore you can sweep one of the drives completely.
    Just my 2 cents

  • Final cut pro x - lion - mbp 2011 2.0 15 - not responding at all since latest update. Can't open or edit projects, loading window that pops us when you click the app (as it loads) does not go away, says loading compressor support.  Have tried reinstalling

    final cut pro x - lion - mbp 2011 2.0 15 - not responding at all since latest update. Can't open or edit projects, loading window that pops us when you click the app (as it loads) does not go away, says loading compressor support, paralyzed.  Have tried reinstalling, default settings etc
    Appreciate suggestion, working on deadline. Thanks.  

    Here is the start of the crash report:
    Process:         Final Cut Pro [20568]
    Path:            /Applications/Final Cut Pro.app/Contents/MacOS/Final Cut Pro
    Identifier:      com.apple.FinalCut
    Version:         10.0.1 (185673)
    Build Info:      ProEditor-185670300~1
    App Item ID:     424389933
    App External ID: 4138831
    Code Type:       X86-64 (Native)
    Parent Process:  launchd [102]
    Date/Time:       2011-11-11 20:41:32.201 -0800
    OS Version:      Mac OS X 10.7.2 (11C74)
    Report Version:  9
    Interval Since Last Report:          192058 sec
    Crashes Since Last Report:           14
    Per-App Interval Since Last Report:  157161 sec
    Per-App Crashes Since Last Report:   14
    Anonymous UUID:                      DD542B2F-58A0-482E-AAFA-ECADEC76F562
    Crashed Thread:  0  Dispatch queue: com.apple.main-thread
    Exception Type:  EXC_BAD_ACCESS (SIGSEGV)
    Exception Codes: KERN_INVALID_ADDRESS at 0x0000000280000003
    VM Regions Near 0x280000003:
        CG shared images       00000001cbf62000-00000001cc182000 [ 2176K] r--/r-- SM=SHM 
    -->
        STACK GUARD            00007fff5bc00000-00007fff5f400000 [ 56.0M] ---/rwx SM=NUL  stack guard for thread 0
    Application Specific Information:
    objc[20568]: garbage collection is OFF

  • MBP with retina display always crash when using Final cut pro x and iMovie. Plz l need help

    HI, My MBP with retina display always crash when l am using Final cut pro x and iMovie and come up with gray screen. Plz l need help

    Take it back and get a refund. What are you waiting for, your new Mac does not work correctly.

  • Final cut pro & MBP 13 inch

    Hello. Looking to order mac book pro 13inch
    2.5GHz Dual-core Intel Core i5, Turbo Boost up to 3.1GHz 
    4GB 1600MHz DDR3 SDRAM — 2x2GB 
    500GB Serial ATA Drive @ 5400 rpm 
    HD4000 intel graphics
    Is it okay to use with final cut pro x? Will it run fine? Should i just stick to basic editing with iLife?

    Go into an APple Store and spend some time finding out whether it will do what you want. There are clips at various resolutions loaded on their display machines. Do a few projects with these clips, add some effects, export and see how it generally performs.
    Russ

  • Comparing video quality of AVCHD BluRay discs using Final Cut Pro Share vs Compressor

    Up front, I will admit to being a newbie when it comes to using Final Cut Studio 3 and would appreciate some feedback from the Apple forum experts.
    I have spent a lot of time trying to determine how to achieve an optimum group of Compressor 3.5.2 settings so that the playback video quality of an AVCHD BluRay disc is equal to or better than one created by using the simpler auto settings of FCPro Share, version 7.0.2.
    When using Compressor’s auto/default maximum settings, I experienced the same error message reported in:
    Error MessageDuring Creation of Blu-ray Disc in FCP and Compressor 3.5
    https://discussions.apple.com/message/12073794#12073794
    I have since made some Compressor AVCHD Discs with smaller bit rate settings and compared video quality with a single FCP Share AVCHD disc.  Both seem to be equal in providing a very good video when viewed on my new Panasonic DMP BDT 310 BluRay player. However, the Compressor AVCHD discs show some motion artifacts not present with the FCPro Share version, especially when scrolling text or when objects are moving through the field of view, and visible artifacts are seen from a stationary chain link fence and other lattice work in the background of the video sample.
    My sample video used for the comparisons between Compressor and FCP Share discs is a 21 minute duration home movie, originally captured from a mini DV, Canon HV30 1080i camcorder using ProRes HQ encoding(1440x1080), and dragged into FC Pro 7.0.2 timeline where 10 chapter markers have been inserted. 
    To create an AVCHD disc using FCPro Share, Markers are used to set the IN and OUT points, Select IN to OUT from the timeline, pull down File Menu Share, Select Create BluRay from options in pop out Share pane, and designate output device along with picture files for Background, Logo, and Title options. When these are completed, click on Export.  My 21-minute video required almost two hours for encoding including about 10 minutes for burning. This accomplished on an iMac 3.06 GHz Intel Core 2 Duo.
    To prepare this same 21-minute video for use with Compressor, I again Select IN to Out from the FCPro timeline, but this time use File Export as a QuickTime Self Contained movie including Chapter markers. Then Open Compressor, choose Create BluRay from Template pane, right click on the down arrow in the Batch window and load the QT self contained movie file. From there I went to the Inspector window and tried various combinations of bit rate settings along with Frame Encoder options such as Better or Best motion parameter controls.
    I have tried the following combinations of Bit rate settings along with varying Frame Encoder controls and burned an AVCHD disc for each example:
    Example A
    Compressor set to 6 Mbps Average and 8Mbps Maximum, Frame Encoder settings OFF. Approximately 4 hours to encode although the time remaining estimator indicated a larger value of ~7 hours; not an accurate estimator at all. 
    Example B
    Compressor set to 6 Mbps Average and 8Mbps Maximum, Frame Encoder settings ON, using “Better (Linear Filter) and Better (Motionadaptive)” settings. Approximately 4 hours to encode, not the 13 hours that were estimated.
    Conclusion: Comparing A & B Compressor versions, Disc B showed some improvements in reducing motion artifacts over Disc A.
    Example C
    Compressor set to 13 Mbps Average and 15 Mbps Maximum, Frame Encoder settings ON, using “Better (Linear Filter) and Better (Motion adaptive)” settings. Multipass checked. DeInterlace was checked. Unknown hours to encode; about 8 hours done overnight..
    Conclusion: Disc C showed some minor improvements reducing motion artifacts over Disc B
    Example D
    Compressor Auto settings,i.e., 15 Mbps Average and 17 Mbps Maximum, Frame Encoder settings ON, using “Better (Linear Filter) and Better (Motion adaptive)” settings. Multipass checked. Approximately 12 hours to encode, done overnight. Inserted disc next morning after the overnight encoding was completed, and a few minutes later an error message pane appeared that the maximum bit rate had been exceeded.  This message was consistent with the Apple posted thread referenced above. Unfortunately the long overnight encoding was wasted.
    It seemed to me that the best Compressor settings for suppressing the motion artifacts were displayed by the disc burned in Example C, i.e.,  13/15 Ave/Max Mbps with“Better” Motion settings in the Frame Encoder.
    However, when this disc was compared to the AVCHD Disc burned using the FCPro Share, the latter still seemed much better. I do not know what the auto bit rate values are as set in FC Pro, but for me, the quality is quite good AND the motion artifacts are significantly reduced, especially evident with the scrolling text.
    Sorry about this long post, but I thought the detail would be necessary for the experts, and maybe helpful to others trying to get started in this BluRay arena.  Did I misuse Compressor?  I think the sample video exported as a self contained QT movie was the right thing to do?  Not sure where I went wrong.
    Thanks in advance for Feedback and Recommendations.  For now, I’m going to stay with the simpler process using Final Cut Pro Share function.
    BoBo

    Thank You, Brad, for responding;  glad to hear I'm not the only one having similar Compressor issues.  
    You may have hit on something.  Perhaps Compressor's use of H.264 encoding was the reason for my motion artifacts?  And perhaps Final Cut Pro Share retains the 1440x1080 quality as it burns the AVCHD BluRay disc?
    I had Toast 10 for less than 30 days a couple of years ago, and was lucky to get a refund.
    What version of Toast do you have?  Wondering if new Toast 11 has improved previous bugs, especially upgrading its Chapter text, pictures, music.  I would go back to Toast if it came close to mirroring DVD Studio Pro, or even iDVD capabilities.
    Thanks,
    BoBo

  • Would I still be able to fun Final Cut Pro with no problem with the new 13"

    My old MBP has "NVIDIA GeForce 860M GT with 128MB" and the new 13-inch MBP has "NVIDIA GeForce 9400M graphics" I don't really know what "GT" means, but the more expensive MBP's listed have it, so I'm guessing it's pretty good. I was wondering if I'd still be able to fun Final Cut Pro quickly if I got the new 13-inch MBP.
    Back in 2007, the guy at the Apple store said I'd have to get a MBP instead of a MB if I wanted to fun FCP correctly, and now both the MB and MBP use the same graphics chip, so I'm wondering if FCP will still function correctly on the new 13-inch MBP?

    Eric wrote:
    Incorrect about what? I never made any statements, just questions. According to the Apple store, the Macbook and 13-inch Macbook Pro both use the same chip, which is the only statement I made. And which is why I'm wondering if the new 13-inch MBP can even handle FCP since the MB can't (according to the guy in the Apple store).
    Actually, your original question was formed as part of a statement:
    now both the MB and MBP use the same graphics chip, so I'm wondering if FCP will still function >correctly on the new 13-inch MBP?
    And that's the part that BoyHowdy pointed out that you are "a little incorrect" about. While it's true that they both have an onboard 9400M graphics chip, you are overlooking the fact that the 15" & 17" MBPs also have the much more powerful and dedicated 9600M GT graphics card. This is not an insignificant difference. Final Cut Pro, not to be confused with Final Cut Express (not you, others have confused the two), requires a dedicated card which the 15" & 17" MBPs have in the form of the additional 9600M GT, but the 13" still lacks.
    The specs on the Final Cut Pro page are a little confusing because while it says it *will not work* with integrated graphics, it specifically refers to Intel, and does not mention Nvidia. However, it still says it requires an AGP or PCI Express card, which the 9400M is not.
    My feeling is that even if it runs, the performance of Final Cut Pro on that system will be unacceptable, and will ultimately drive you mad. It really pushes the graphics systems hard, and despite their vast improvement over the pathetic Intel onboard graphics systems, the 9400M is still pretty anemic for high end work. You're better off saving a little more money and getting the low end 15" model. Not to mention, the extra screen real estate makes a huge difference with the very crowded Final Cut Pro UI.

  • Final Cut Pro takes time to share/export a 40 minute video

    I bought a brand new new Macbook Pro (4 GB RAM, i5, HD 500 GB (300 GB available) Mid 2012 model and it takes 3-4 hours to share/export a 40 minute video without any effects applied on the clips. I have another Macbook Pro, same model and same specs and it just takes an hour to render the same video/project which I think is reasonable time.
    Video files are from my Canon 60d camera which are .mov files. I usually export my projects to H.264 Video and AAC. (Share>Master File)
    I don't have any problem exporting/sharing a 3 minute video with effects applied on the clips on my macbook Pro where I'm having a problem with because it has the same export/share time with my other MBP. It takes 5 minutes to share/export a 3 minute video which I think is reasonable. The problem is why my new Macbook Pro takes time to share/export a project with a video duration of 30-40 minutes compared to my other Macbook Pro.
    Thank you for your help!
    Final Cut Pro version: 10.0.8
    Macbook: OS X 10.9.2

    If you have two MBPs with exactly the same specs (including GPU) – and you have comparable free space on both system drives –and comparable free space on any media drives  – then verify that your perceptions of their exporting times are different by doing a test with identical projects media and export settings – and ith no other apps running. If you confirm that one is much faster than the other, I'd suspect the GPU. Also open Activity Monitor to see what's being reported – particularly to see whether there are differences in the way memory is being used.
    Russ

  • Final cut pro x is killing my macbook pro!

    Final cut pro x running on my macbook pro results in constant running of fans at full pace. Jerkiness in playback on fcpx. Entire computer is jerky through other programs like safari too. It seems fcpx background operations are absorbing the entire power of the co puter. Any thoughts/suggestions? Ps it runs fcp 7 fine.

    With your MacBook Pro, did you get a unit with the dual video processor? A while ago Apple started putting in two different video cards. One was for the mundane everyday stuff and the goal was to save power. On my MBP I have a Nvidia GeForce 9400M, I also have an Nvidia GeForce 9600M GT which is much more robust for graphics power. The VRAM on the 9400 was only 256, with the 9600M GT it was 512. The bigger the GPU and the fast the GPU, the faster the MBP especially with FCP.
    You can select the faster processor by going to system preferences and choose higher performance. It will require you to log out and log back in to use the different GPU. Also turn your harddrive to never sleep when you do this and you will see some improvement in speed and lag.
    Another thing is to set up your projects on a fast external drive. If you try to keep source files and project files on the MBP drive you are begging for slowness.
    Good luck!

  • Final Cut Pro X crashes when adding transitions, throughout the entire program.

    I've had FCP X installed for a few weeks now, and I decided to hold back asking my question and see if anybody else is experiencing the same problems.
    I did find one matching problem on the discussions forum, but the user found a solution which I tried, and did it did not work.
    Everytime I try to add a very simple transition to my video in Final Cut Pro X, it gives me the spinning colorwheel, hesitates for a few seconds and then crashes.
      It only does it with transitions, I can add effects, adjust color, etc. but only when adding transitions does it crash.
    I've tried deleting events and original media, I've reimported using optimized media, I've tried both ways of keeping files in original locations and also copying to final cut events folder.
    The video I'm using is full 1080p mov files from a Canon 5D Mark II.
    It does it in the timeline as well as the secondary timeline.
    I've tried the solution that the previous asker did, which was copying the content to another FCP event, and it didn't work for me. Still crashes whether I try to drag the transition to my timeline, use the keyboard shortcut, or double click.
    I have a Early 2010 15 inch MBP i5 with 8gb of RAM running newest version of Snow Leopard.
    Hope I've provided enough information
    Thanks,
    -Jon

    Same Issue: Added a transition and then beach ball from **** and crash. Also lost two hours of work when it restarted and reverted to the last planned quit.
    FCPX is benched until Lion and updates. Don't have time to be a beta tester on what might end up being a hobbyists toy.
    MacPro Quad 3.0, 10G RAM.
    Mark

Maybe you are looking for