My midi/audio interface Edirol PCR 1  won't work with Yosemite and Roland have no driver update. Is this the end of the line for this device.

My midi/audio interface ( Edirol PCR1) will not interface with Yosemite 10.10 and Roland have no driver update, is there any fix for the problem or is the end of the line for this device.

Same problem here, what a shame as this has been my favorite portable keyboard for ages. Whenever I see one in a store(very rarely) I'll grab it.

Similar Messages

  • TS3992 My notes won´t syncronice with iCloud and I have turned it on in the IOS device. What do I do wrong?

    My notes won´t syncronice with iCloud and I have turned it on in the IOS device. What do I do wrong?

    Make sure you have Notes turned to On in Settings>iCloud.  Also, open Notes and tap Accounts on the top left, then make sure you are creating the notes you want to sync with iCloud in the iCloud account (and not something else like On My iPhone).

  • IPod touch won't work with car's USB port after sw update

    I've been using my iPod with my 2011 Honda CR-V's USB port to play my music through the car's audio system without issue since I bought the car.  This stopped working after the latest iPod software update a few days ago--the msg on the audio screen says it's now "unsupported". Is there anything I can do to fix this without a full restore? Why did it change?  Thanks for any help.

    Hey there,
    Glad to hear we're getting closer. Looks like you're connected to the network, just not able to utilize it's internet connection.
    Let's check your iPod's IP addres. Tap Settings > Wi Fi and look for your network. To the right, there's a blue circle with a white arrow in it. Tap that circle. If the IP address starts out with 169.x.x.x, it is a self-assigned IP address. Since it came from the iPod, and not the router, it can't be used.
    I would recommend resetting your iPod's network settings:
    Settings > General > Reset > Reset Network Settings
    When the iPod restarts, reconnect it to your network and try Safari again.
    If it still isn't working, try powercycling your router and resetting those settings at the same time.
    1. Turn off the router
    2. Reset the network settings again, as indicated above
    3. Turn the router back on
    4. Reconnect the iPod to the network
    If it still isn't working, let's check your iPod's software version.
    Settings > General > About
    If you've upgraded to 2.0, the latest version is 2.0.2. If you haven't upgraded, the latest version is 1.1.5. If you're not at either of those numbers, connect the iPod to your computer and use iTunes to check for software updates for the iPod.
    Regarding the router settings, I'm not familiar with your router manufacturer. I'd check their website for instructions on that. I think at this point you wouldn't really need to change any settings, but just check for firmware updates.
    CG

  • Internet won't work with wireless and ethernet connected at the same time.  Airport extreme

    Why can I not connect ot the internet when both the ethernet cable is connected.  The connection is fine when only on wireless and fine when only the ethernet cable is connected but won't work when the cable is plugged in.
    any ideas?

    opps  forgot to set router as bridge  turned off NAT and problems solved

  • Peripherals won't work with Yosemite

    I switched to Yosemite in autumn 2014 and it worked. Since I moved house and reassembled my Mac Pro and all its peripherals I've had problems. Both of my Apple USB keyboards now won't work. They each have the same problem - when plugged in they show the cap locks green light but nothing else. My Logitech wireless mouse no longer works, yet the Mighty Mouse does. Most frustratingly, my WD Passport external hard drive with my Time Machine on it, is no longer recognised. I have searched the Internet and there seem to be literally hundreds of people who are suffering a variety of frustrations from Yosemite. I've tried a few of the 'solutions' based on the 'turn it off and turn it back on again' theme, all to no avail. Having bought Macs since the early 1990s, I've always championed their simplicity and reliability. My patience is being sorely tested by Yosemite. A cheap PC with the new Windows operating system is beginning to look like an attractive alternative, especially now that Yosemite is looking like Apple's version of "Vista".
    Any helpful ideas would be very welcome.

    Please post in the Yosemite support forum for issues with Yosemite. The link is here.......OS X Yosemite
    You posted in the support forum for the AirPort Express, AirPort Extreme and Time Capsule.....these products.....
    If you have a question about one of these products, we can likely help.

  • My Imageclass MF4890dw won't work with Yosemite OS. Is there a patch to make them compatible?

    Please help.

    If you transferred your programs between machines that is probably the problem.  You should install Adobe applications using installation files.

  • Printer won't work with Yosemite

    kodak printer will not work with Yosemite. It was fine before. Anyone have the same problem with a Kodak printer. Weirdly I can scan a document but not print anything at all. It says printing but nothing comes out!

    Hi PBS,
    This video helped me out.
    Printer help with Yosemite

  • HP scanner won't work with Yosemite

    I can't use my scanner (HP Deskjet F380 All-in-One) now that I have Yosemite.  I looked for the HP driver, but it doesn't exist for OS X 10.10.1  I need help, please.

    Have you tried using Image Capture that comes with Yosemite. I had a similar problem after the upgrade and my HP was no longer supported. I switched to Image Capture and it works fine, lacks some features that the HP software provided but overall it works for my needs.

  • Aex won´t work with pc and hp deskjet 880C

    Hi, I´ve bought a aex and have done the network setup which works well. But one thing is still not working.
    The hp printer which is connected and detected to the aex. At the pc (windows xp) I´ve done the setup with bonjour. Everything seems to be ok, but the printer prints silly letters.
    Is there any help for my problem?
    Many thanks!

    You're not using the correct driver.
    Problems with finding Printer Driver on Windows XP when using printer connected to Airport Extreme or Express
    http://www.ifelix.co.uk/tech/1012.html
    If you are sharing your Mac printer, turn this off, this will enusre that you are selecting the Printer in the Bonjour Wizard connected to the AX and not the Mac shared printer (connected to the AX).
    iFelix

  • Iphone 4S won't work with bose dock

    Iphone 4S won't work with Bose Dock Speaker

    I have this same problem newly purchased iPhone 4s will plug into my Bose Dock. It will still charge and connect as if to play music but no sound will come out

  • Recommend midi/audio interface

    I am just getting back into home recording and have the following setup:
    Mackie 1604VLZpro mixer
    Akai S5000
    Various keyboards
    Effects.
    Guitars
    Vocal mic
    I want to purchase a suitable midi/audio interface to work with my G5 DP1.8 / OSX 10.3.9. I am thinking of buying Logic express or pro, haven’t decided yet.
    Can anyone recommend a suitable interface that would work well with my setup.
    Could the audio, guitars and vocals, be routed back through my mixer independently once recorded into logic?
    Cheers
    Rob

    Check on the Alesis io14 or io26 -- I read all the forums and this one is coming up as the best, especially at the price. Also recommended by my pro audio guru friend (not a salesperson). I bought it and it worked immediately with my MacBook Pro.....for both audio and MIDI. It's in your price range, and believe me the io26, in particular, is a lot of high-end audio for the money. It's light, compact, but most of all it has some of the best components and construction you can buy.
    The following link is to a Harmony Central pro review of the io26. Review is located at http://acapella.harmony-central.com/forums/showthread.php?t=1562285
    It's a long thread, dating back to its introduction in March, 07, and there is some discussion of early problems with certain computers and sequencing software. If you read through the entire thread you'll see they were resolved and that the reviews are very, very positive---especially the pro audio review by the Harmony Central reviewer.

  • Apple TV2 airplay audio (via Airport Express) works well with music, but won't work with any video.

    I have an ATV2 and Airport Express connected to speakers all connected to the same network. It all works with music, but won't work with any video audio. In my ATV's settings I've selected my AirPort Express speakers. It works for music, why not everything else? Is there a fix or work around?

    Netflix is first on that list...What I mean is, if there is a feature that allows for a wireless audio connection to the Apple TV, why wouldn't the developer allow it. To keep me from enjoying a more convient connection? I can have the same listening experience on a wired connection...

  • I have interface M Audio firewire 400 new Mac Pro has firewire 800 Do you think an adaptor will provide the same quality? Will the M audio 400 work with lion and new system? Thanks so much

    I have interface M Audio  400 with 400 firewire new Mac Pro has firewire 800 Do you think an adaptor will provide the same quality? Will the M audio 400 work with lion and new system or do I need new software? Thanks so much

    If you have a little Firewire adaptor, everything should work fine. It does on my system.

  • My Mid 2007 24" iMac has been a bit laggy on Yosemite and getting worse every day, so I went to the Apple Support pages on Apples website looking for help and thought I'd found some. This is what I did and it made everything 100 times worse :(

    So here is what I found and what I did to try to alleviate the RAM eating upgrade named Yosemite. This guy has helped quite a few people, you can read all the comments and I gave it several tries this morning.
    Oct 23, 2014 10:59 AM
    I post this hoping to help those users who, like me, are experiencing high CPU usage and massive memory leaking with OS X core services and apps, leading to slow performance and battery drain.
    I've tried everything mentioned, but found the right combination of steps to follow. I've tried this with seven different Apple computers, including mine, and has worked well so far. I applied this method yesterday to give these process a 24 hour window to fail again, so far everything good.
    First step: disconnect any external or secondary monitors, if any is present. The video memory allocation leak can also happen if you have a system with an integrated card, like Intel, with no external monitors attached.
    Second step: Shut down your machine and enter Safe Mode (press shift once you turn on your computer again, more info below). Once you're there, fix your disk permissions.
    Guide of how to access Safe Mode: OS X: What is Safe Boot, Safe Mode?
    Third step: From Safe Mode turn off your machine again and reset your System Management Controller (SMC). There are different methods, depending on machine, to do this. To know what method applies to yours read the following guide.
    Intel-based Macs: Resetting the System Management Controller (SMC)
    Fourth step: Once your machine completes a full boot after resetting the SMC turn it off again and reset your PRAM (THIS IS THE MOST IMPORTANT STEP, BUT THE PREVIOUS ONES ARE ESSENTIAL FOR THIS ONE TO WORK). The PRAM stores small bits of data that indicate our Apple computer how to interact with the devices connected to it, including monitors and video cards. It also affects software.
    To reset it you should hold the OPTION, COMMAND, P and R keys in your keyboard immediately after turning on your machine again.You'll hear the start up chime, continue pressing the keys until the machine boots and the chime starts A SECOND TIME, then release. IF YOUR YOSEMITE INSTALLATION LOCKS UP AT A BLACK SCREEN AFTER THIS, DONT PANIC! It's normal, just turn off your computer and let it boot again.
    More info about PRAM: OS X Mavericks: Reset your computer’s PRAM
    Voila, reconnect your external displays and enjoy your system.
    Message was edited by: Luis_Mercado
    MacBook Air, OS X Yosemite (10.10)
    So here is my EtreCheck report that is a bit above my head but anything in red isn't good I'm sure. I'd really appreciate some friendly advice
    EtreCheck version: 2.0.11 (98)
    Report generated  at
    Hardware Information: ℹ️
      iMac (24-inch Mid 2007) (Verified)
      iMac - model: iMac7,1
      1 2.4 GHz Intel Core 2 Duo CPU: 2-core
      6 GB RAM Upgradeable
      BANK 0/DIMM0
      4 GB DDR2 SDRAM 667 MHz ok
      BANK 1/DIMM1
      2 GB DDR2 SDRAM 667 MHz ok
      Bluetooth: Old - Handoff/Airdrop2 not supported
      Wireless:  en1: 802.11 a/b/g/n
    Video Information: ℹ️
      ATI,RadeonHD2600 - VRAM: 256 MB
      iMac 1920 x 1200
    System Software: ℹ️
      OS X 10.10 (14A389) - Uptime: 2:34:25
    Disk Information: ℹ️
      WDC WD3200AAJS-40RYA0 disk0 : (320.07 GB)
      S.M.A.R.T. Status: Verified
      EFI (disk0s1) <not mounted> : 210 MB
      Data (disk0s2) /  [Startup]: 319.21 GB (230.04 GB free)
      Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
    USB Information: ℹ️
      VIA Labs, Inc. USB2.0 Hub
      Generic USB Storage
      Western Digital My Passport 0824 2 TB
      S.M.A.R.T. Status: Verified
      EFI (disk2s1) <not mounted> : 210 MB
      Passport Slim (disk2s2) /Volumes/Passport Slim : 2.00 TB (1.62 TB free)
      VIA Labs, Inc. USB2.0 Hub
      Apple Inc. Built-in iSight
      Apple Inc. Bluetooth USB Host Controller
      Logitech USB Receiver
      Apple Computer, Inc. IR Receiver
    Firewire Information: ℹ️
      WD Passport III 800mbit - 800mbit max
      S.M.A.R.T. Status: Verified
      EFI (disk1s1) <not mounted> : 210 MB
      Passport (disk1s2) /Volumes/Passport : 499.76 GB (370.05 GB free)
    Gatekeeper: ℹ️
      Anywhere
    Kernel Extensions: ℹ️
      /Library/Extensions
      [not loaded] com.lge.driver.LGAndroidmdmcontrol (4.15 - SDK 10.10) Support
      [not loaded] com.lge.driver.LGAndroidmdmdata (4.15 - SDK 10.10) Support
      [not loaded] com.lge.driver.LGAndroidndiscontrol (4.15 - SDK 10.10) Support
      [not loaded] com.lge.driver.LGAndroidndisdata (4.15 - SDK 10.10) Support
      [not loaded] com.lge.driver.LGAndroidrndis (4.15 - SDK 10.10) Support
      [not loaded] com.lge.driver.LGAndroidserial (4.15 - SDK 10.10) Support
      [not loaded] com.lge.driver.LGAndroidusbbus (4.15 - SDK 10.10) Support
      /System/Library/Extensions
      [not loaded] com.devguru.driver.SamsungComposite (1.4.26 - SDK 10.6) Support
      [not loaded] com.markspace.iokit.IOMissingSyncMassStorage (199) Support
      [not loaded] com.markspace.missingsync.palmos.classicseize (1) Support
      [not loaded] com.microsoft.driver.MicrosoftKeyboard (6.3) Support
      [not loaded] com.microsoft.driver.MicrosoftMouse (8.2) Support
      [not loaded] com.palm.ClassicNotSeizeDriver (3.2.1) Support
      [loaded] com.wdc.driver.1394.64.10.9 (1.0.1 - SDK 10.9) Support
      [not loaded] com.wdc.driver.1394HP (1.0.5) Support
      [loaded] com.wdc.driver.USB.64.10.9 (1.0.1 - SDK 10.9) Support
      [not loaded] com.wdc.driver.USBHP (1.0.1) Support
      /System/Library/Extensions/MicrosoftKeyboard.kext/Contents/PlugIns
      [not loaded] com.microsoft.driver.MicrosoftKeyboardBluetooth (6.3) Support
      [not loaded] com.microsoft.driver.MicrosoftKeyboardUSB (6.3) Support
      /System/Library/Extensions/MicrosoftMouse.kext/Contents/PlugIns
      [not loaded] com.microsoft.driver.MicrosoftMouseBluetooth (8.2) Support
      [not loaded] com.microsoft.driver.MicrosoftMouseUSB (8.2) Support
      /System/Library/Extensions/ssuddrv.kext/Contents/PlugIns
      [not loaded] com.devguru.driver.SamsungACMControl (1.4.26 - SDK 10.6) Support
      [not loaded] com.devguru.driver.SamsungACMData (1.4.26 - SDK 10.6) Support
      [not loaded] com.devguru.driver.SamsungMTP (1.4.26 - SDK 10.5) Support
      [not loaded] com.devguru.driver.SamsungSerial (1.4.26 - SDK 10.6) Support
    Startup Items: ℹ️
      Cocktail: Path: /Library/StartupItems/Cocktail
      Startup items are obsolete and will not work in future versions of OS X
    Problem System Launch Agents: ℹ️
      [failed] com.apple.security.cloudkeychainproxy.plist
    Problem System Launch Daemons: ℹ️
      [failed] com.apple.ctkd.plist
      [failed] com.apple.ifdreader.plist
      [failed] com.apple.nehelper.plist
      [failed] com.apple.nsurlsessiond.plist
      [failed] com.apple.softwareupdated.plist
      [failed] com.apple.wdhelper.plist
    Launch Agents: ℹ️
      [loaded] com.google.keystone.agent.plist Support
      [loaded] com.hp.help.tocgenerator.plist Support
      [not loaded] com.maintain.LogOut.plist Support
      [loaded] com.maintain.PurgeInactiveMemory.plist Support
      [not loaded] com.maintain.Restart.plist Support
      [not loaded] com.maintain.ShutDown.plist Support
      [not loaded] com.maintain.Sleep.plist Support
      [running] com.maintain.SystemEvents.plist Support
      [loaded] com.oracle.java.Java-Updater.plist Support
      [invalid?] com.tvmobili.artwork.plist Support
      [running] com.wdc.raidmanagerstatusmenu.plist Support
    Launch Daemons: ℹ️
      [loaded] com.adobe.fpsaud.plist Support
      [running] com.bjango.istatserver.plist Support
      [loaded] com.google.keystone.daemon.plist Support
      [loaded] com.hp.lightscribe.plist Support
      [loaded] com.maintain.CocktailScheduler.plist Support
      [loaded] com.maintain.HideSpotlightMenuBarIcon.plist Support
      [loaded] com.oracle.java.Helper-Tool.plist Support
      [loaded] com.oracle.java.JavaUpdateHelper.plist Support
      [invalid?] com.tvmobili.tvmobilisvcd.plist Support
      [running] com.wdc.WDRAIDDriveService.plist Support
      [loaded] com.westerndigital.WD-Drive-Manager-Installer.plist Support
      [loaded] net.freemacsoft.LiteIcon.LIHelperTool.plist Support
    User Launch Agents: ℹ️
      [loaded] com.adobe.ARM.[...].plist Support
      [loaded] com.maintain.ShowUserLibraryDirectory.plist Support
      [loaded] uk.co.markallan.clamxav.freshclam.plist Support
    User Login Items: ℹ️
      Macs Fan Control Application (/Applications/Macs Fan Control.app)
      Solar Service Application (/Users/[redacted]/Library/Application Support/Logitech/SolarService/Solar Service.app)
      Android File Transfer Agent Application (/Users/[redacted]/Library/Application Support/Google/Android File Transfer/Android File Transfer Agent.app)
      WDDriveUtilityHelper Application (/Applications/WD Drive Utilities.app/Contents/WDDriveUtilityHelper.app)
      WD Quick View UNKNOWN (missing value)
    Internet Plug-ins: ℹ️
      Unity Web Player: Version: UnityPlayer version 2.0.2f2 Support
      Default Browser: Version: 600 - SDK 10.10
      Flip4Mac WMV Plugin: Version: 2.4.2.4 Support
      OfficeLiveBrowserPlugin: Version: 12.3.6 Support
      RealPlayer Plugin: Version: Unknown
      Silverlight: Version: 5.1.30514.0 - SDK 10.6 Support
      FlashPlayer-10.6: Version: 15.0.0.223 - SDK 10.6 Support
      DivXBrowserPlugin: Version: 1.4 Support
      Flash Player: Version: 15.0.0.223 - SDK 10.6 Support
      QuickTime Plugin: Version: 7.7.3
      iPhotoPhotocast: Version: 7.0
      AdobePDFViewer: Version: 9.5.5 Support
      JavaAppletPlugin: Version: Java 7 Update 71 Check version
    3rd Party Preference Panes: ℹ️
      Flash Player  Support
      Java  Support
      Microsoft Mouse  Support
      MusicManager  Support
    Time Machine: ℹ️
      Skip System Files: NO
      Mobile backups: ON
      Auto backup: NO - Auto backup turned off
      Volumes being backed up:
      Data: Disk size: 319.21 GB Disk used: 89.17 GB
      Destinations:
      Passport [Local]
      Total size: 499.76 GB
      Total number of backups: 25
      Oldest backup: 2014-05-10 16:56:40 +0000
      Last backup: 2014-11-14 17:38:44 +0000
      Size of backup disk: Adequate
      Backup size 499.76 GB > (Disk used 89.17 GB X 3)
    Top Processes by CPU: ℹ️
          3% WindowServer
          1% Google Chrome Canary
          1% coreaudiod
          0% systemstatsd
          0% ps
    Top Processes by Memory: ℹ️
      174 MB Google Chrome Canary
      84 MB Google Chrome Helper
      64 MB mds_stores
      52 MB Finder
      45 MB iconservicesagent
    Virtual Memory Information: ℹ️
      3.02 GB Free RAM
      1.69 GB Active RAM
      317 MB Inactive RAM
      753 MB Wired RAM
      8.69 GB Page-ins
      156 MB Page-outs
    I hope to hear from anyone even to knock me in the head, lol. Thanks in advance and I'll be around trying to figure this out.

    1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
    Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
    2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
    There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
    You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
    In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
    You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
    Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
    4. Here's a summary of what you need to do, if you choose to proceed:
    ☞ Copy a line of text in this window to the Clipboard.
    ☞ Paste into the window of another application.
    ☞ Wait for the test to run. It usually takes a few minutes.
    ☞ Paste the results, which will have been copied automatically, back into a reply on this page.
    The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
    5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
    6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
    7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
    Triple-click anywhere in the line of text below on this page to select it:
    PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB ' com.adobe.AAM.Updater-1.0 com.adobe.AdobeCreativeCloud com.adobe.CS4ServiceManager com.adobe.CS5ServiceManager com.adobe.fpsaud com.adobe.SwitchBoard com.apple.aelwriter com.apple.AirPortBaseStationAgent com.apple.FolderActions.enabled com.apple.FolderActions.folders com.apple.installer.osmessagetracing com.apple.mrt.uiagent com.apple.ReportCrash.Self com.apple.rpmuxd com.apple.SafariNotificationAgent com.apple.usbmuxd com.google.keystone.agent com.google.keystone.daemon com.microsoft.office.licensing.helper com.oracle.java.Helper-Tool com.oracle.java.JavaUpdateHelper ' ' 879294308 461455494 3627668074 1083382502 1274181950 1855907737 1848501757 464843899 3694147963 1417519526 1233118628 2456546649 2806998573 2778718105 2636415542 842973933 3301885676 891055588 998894468 695903914 4136085286 ' 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: (E[^m]|[^EO])|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<10) print "com.apple.";} ' ' { sub(/ :/,"");print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\\([0-9]+\\)\\(.+\\)/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n   "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n   [N/A]";"cksum "F|getline C;split(C, A);C="checksum "A[1];"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F" ("T", "C")";else F=F" ("C")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n   ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */   /;' ' s/^.+ |\(.+\)$//g;p ' '/\.(appex|pluginkit)\/Contents\/Info\.plist$/p' ' /2/{print "WARN"};/4/{print "CRITICAL"};' 's/^.+: //p' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test osascript\ -e sysctl\ -n pluginkit sudo\ smcDiagnose );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$(RefProc): \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|Roame|SMC:|suhel| VALI|ver-r|xpma' -o -o -k Sender fseventsd -k Message Req SL -o -k Sender Req launchd -k Message Req de: " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,Ex}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,In{p,ter},iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????|wc -l' kern.memorystatus_vm_pressure_level '3>&1 >&- 2>&3' );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors App\ extensions Lockfiles Memory\ pressure SMC );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;B1&&D13 40 53 67 55;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 38 52 66 54;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;B3 4 0 65;A3 14 6 32 0;B4 0 16 11;A1 39 50 64;B7 16;C3 52;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D12 4 51 32 53;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    8. Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
    9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
    exec bash
    and press return. Then paste the script again.
    10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return  three times at the password prompt. Again, the script will still run.
    If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
    11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
    [Process completed]
    to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
    12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
    At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
    If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
    13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
    14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
    Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

  • Safari won't work with CNN Pipeline and other sites all of a sudden?

    Safari won't work with CNN Pipeline and other sites all of a sudden? A few weeks ago Safari was working OK but now I often have to use Firefox to visit certain webpages.
    Anyone else having this same problem?
    Is there a quick fix?
    I'm using Safari 2.0.4
    Thanks.

    Hi QuickTimeKirk,
    I have WMP version 9, as well. I do not use F4M, for many users f4mac is what helps.
    I find some items work while others do not. I always get an alert about the wmp , which version it is, takes very long to load, I find it is not consistant with Safari, as seems the poster of this topic has found.
    Quoted from ms Mactopia site:
    http://www.microsoft.com/windows/windowsmedia/player/mac/
    Download and find information about Windows Media Player for Mac and playing Windows Media files in your QuickTime Player. Which download is right for you?
    Windows Media Components for QuickTime
    Windows Media Player 9 for Mac OS X
    Windows Media Player 7.1 for Mac
    Important Information
    Microsoft will continue to offer Windows Media Player for Mac as a download free of charge, but has no plans to provide future updates or product support.
    We are pleased to offer Windows Media® Components for Quicktime, by Flip4Mac™, as an alternative for Mac OS X users wanting to play Windows Media Audio and Windows Media Video.
    ~•~
    Validation of the cnn home page using the W3C Validatior, http://validator.w3.org/
    http://validator.w3.org/check?uri=http%3A%2F%2Fwww.cnn.com%2F
    though 41 errors is not as poor as some, Firefox handles the site better than Safari, imo.
    Some sites just work better with Firefox or an other browser.
    Cheers,
    Eme '~[ )

Maybe you are looking for