My mp3's were in a seperate directory. Now, all are transferred to iTunes Media. How can I return the files to the directory??

I had all my mp3's in a directory on a secondary drive on my desktop computer. I used Winamp as my music organizer and all went without any changes. I could add information through the Winamp system, make playlists, and all was well. Now, I've added an iPod that I was discarded from my son, but am finding that many of the music files have been moved to the iTunes Media directory and taken off the secondary drive complately. And, they're all organized in seperate 'album' directories.
I've been going directory by directory to copy and paste the music files to the original directory, but there's more than 5,000 files and it's frustrating (an understatment!!!).
Is there a better way to put the files back into the original folder?

The files that weren't inside the media folder on the original machine need to be copied over to exactly the same paths as they had on the source machine. See this thread for an ongoing discussion of a similar problem. See also this post on migrating the iTunes library.
tt2

Similar Messages

How can i traverse between files in a directory

how can i traverse between files in a directory. I ahve seen in the site that isFile can be used to switch from one file to other but i didn't found such method. I am working in Eclipse. I would be thankful if u send me the solution.I mean the way to traverse

listFiles() returns all the files in a directory. You can check if it is a file and read it. Read the API docs.
If you have specific problem with your code, post the code and the problem description.

How can I put a file in a directory server extracted by a abap report?

Hi!
I need to extract data from r/3 server by a report and put the output into one file in a directory of the server.
In Abap code someone know how can I do that?
Thanks!

Hi,
I post this in the Abap forum but the response are very poor to make this. So, I think to post the message in XI forum because I work with thing of XI and I know that someone know how to put the file in the same server that I take out the data.
Tuhin give me a excellent link to make that!
Thanks!

How can see first 10 files of a directory

Dear all,
I want either last 10 files or first 10 files in my solaris directory. Suppose in one directory I have thousands of files with
extension .req, how can I see. When I put the command below it shows errors.
ls lrth *.req |tail -1
This shows error.
files are too long like this one.
Thanks

This is due to limitation in listing the files, you have to pattern match
ls -ltrh *[0-2].req or ls -ltrh [a-d]*[0-2].req depending upon your filename. Keep the pattern changed according to your requirement. For first 10 files, only use head and for the last 10 files use tail.

In ABAP How to locate an Input file from a Directory during run time

I'm loading data from a flat file(text file) into SAP thru BDC programs. All my input files are present in Application server.How to locate an Input file in a directory during run time to process BDC programs programmatically. Are there any in-built functions?Provided me some sample code or any method of doing the same.

Hello Murali,
you should ask this question in the ABAP forum.
Regards
Gregor

How do I move a file up one directory?

While in "icon view", how can i select a file and then move it up one directory? I always end up dragging it to the desktop, then navigating my way up one directory in finder, then dragging it from desktop to the one directory higher. Seems like a lot of f'n around for such a simple task. Am I missing something? I beleive that an older version of OS X used to allow you to hover the file over the bar along the top of the window or something and then finder would go up one directory. This doesn't seem to work anymore though...unfortunately. Any tips?

while in icon view, select
View -> Show Path Bar
In the bottum row of the Finder Window you can drag your File to any Folder along the path, and also to the enclosing Folder in the directory
Hope that helps
Léonie

How can i get also the files in the root directory and how can i for testing add items of IEnumerable FTPListDetail to List string ?

What i get is only the directories and files that in other nodes. But i have also files on the root directory and i never
get them. This is a screenshot of my program after i got the content of my ftp. I'm using treeView to display my ftp content:
You can see two directories from the root but no files on the root it self. And in my ftp server host i have files in the root direcory.
This is the method i'm using to get the directory listing:
public IEnumerable<FTPListDetail> GetDirectoryListing(string rootUri)
var CurrentRemoteDirectory = rootUri;
var result = new StringBuilder();
var request = GetWebRequest(WebRequestMethods.Ftp.ListDirectoryDetails, CurrentRemoteDirectory);
using (var response = request.GetResponse())
using (var reader = new StreamReader(response.GetResponseStream()))
string line = reader.ReadLine();
while (line != null)
result.Append(line);
result.Append("\n");
line = reader.ReadLine();
if (string.IsNullOrEmpty(result.ToString()))
return new List<FTPListDetail>();
result.Remove(result.ToString().LastIndexOf("\n"), 1);
var results = result.ToString().Split('\n');
string regex =
@"^" + //# Start of line
@"(?<dir>[\-ld])" + //# File size
@"(?<permission>[\-rwx]{9})" + //# Whitespace \n
@"\s+" + //# Whitespace \n
@"(?<filecode>\d+)" +
@"\s+" + //# Whitespace \n
@"(?<owner>\w+)" +
@"\s+" + //# Whitespace \n
@"(?<group>\w+)" +
@"\s+" + //# Whitespace \n
@"(?<size>\d+)" +
@"\s+" + //# Whitespace \n
@"(?<month>\w{3})" + //# Month (3 letters) \n
@"\s+" + //# Whitespace \n
@"(?<day>\d{1,2})" + //# Day (1 or 2 digits) \n
@"\s+" + //# Whitespace \n
@"(?<timeyear>[\d:]{4,5})" + //# Time or year \n
@"\s+" + //# Whitespace \n
@"(?<filename>(.*))" + //# Filename \n
@"$"; //# End of line
var myresult = new List<FTPListDetail>();
foreach (var parsed in results)
var split = new Regex(regex)
.Match(parsed);
var dir = split.Groups["dir"].ToString();
var permission = split.Groups["permission"].ToString();
var filecode = split.Groups["filecode"].ToString();
var owner = split.Groups["owner"].ToString();
var group = split.Groups["group"].ToString();
var filename = split.Groups["filename"].ToString();
var size = split.Groups["size"].Length;
myresult.Add(new FTPListDetail()
Dir = dir,
Filecode = filecode,
Group = group,
FullPath = CurrentRemoteDirectory + "/" + filename,
Name = filename,
Owner = owner,
Permission = permission,
return myresult;
And then this method to loop over and listing :
private int total_dirs;
private int searched_until_now_dirs;
private int max_percentage;
private TreeNode directories_real_time;
private string SummaryText;
private TreeNode CreateDirectoryNode(string path, string name , int recursive_levl )
var directoryNode = new TreeNode(name);
var directoryListing = GetDirectoryListing(path);
var directories = directoryListing.Where(d => d.IsDirectory);
var files = directoryListing.Where(d => !d.IsDirectory);
total_dirs += directories.Count<FTPListDetail>();
searched_until_now_dirs++;
int percentage = 0;
foreach (var dir in directories)
directoryNode.Nodes.Add(CreateDirectoryNode(dir.FullPath, dir.Name, recursive_levl+1));
if (recursive_levl == 1)
TreeNode temp_tn = (TreeNode)directoryNode.Clone();
this.BeginInvoke(new MethodInvoker( delegate
UpdateList(temp_tn);
percentage = (searched_until_now_dirs * 100) / total_dirs;
if (percentage > max_percentage)
SummaryText = String.Format("Searched dirs {0} / Total dirs {1}", searched_until_now_dirs, total_dirs);
max_percentage = percentage;
backgroundWorker1.ReportProgress(percentage, SummaryText);
percentage = (searched_until_now_dirs * 100) / total_dirs;
if (percentage > max_percentage)
SummaryText = String.Format("Searched dirs {0} / Total dirs {1}", searched_until_now_dirs, total_dirs);
max_percentage = percentage;
backgroundWorker1.ReportProgress(percentage, SummaryText);
foreach (var file in files)
TreeNode file_tree_node = new TreeNode(file.Name);
file_tree_node.Tag = "file" ;
directoryNode.Nodes.Add(file_tree_node);
numberOfFiles.Add(file.FullPath);
return directoryNode;
Then updating the treeView:
DateTime last_update;
private void UpdateList(TreeNode tn_rt)
TimeSpan ts = DateTime.Now - last_update;
if (ts.TotalMilliseconds > 200)
last_update = DateTime.Now;
treeViewMS1.BeginUpdate();
treeViewMS1.Nodes.Clear();
treeViewMS1.Nodes.Add(tn_rt);
ExpandToLevel(treeViewMS1.Nodes, 1);
treeViewMS1.EndUpdate();
And inside a backgroundworker do work how i'm using it:
var root = Convert.ToString(e.Argument);
var dirNode = CreateDirectoryNode(root, "root", 1);
e.Result = dirNode;
And last the FTPListDetail class:
public class FTPListDetail
public bool IsDirectory
get
return !string.IsNullOrWhiteSpace(Dir) && Dir.ToLower().Equals("d");
internal string Dir { get; set; }
public string Permission { get; set; }
public string Filecode { get; set; }
public string Owner { get; set; }
public string Group { get; set; }
public string Name { get; set; }
public string FullPath { get; set; }
Now the main problem is that when i list the files and directories and display them in the treeView it dosen't get/display
the files in the root directory. Only in the sub nodes.
I will see the files inside hello and stats but i need also to see the files in the root directory.
1. How can i get and list/display the files of the root directory ?
2. For the test i tried to add to a List<string> the items in var files to see if i get the root files at all.
This is what i tried in the CreateDirectoryNode before it i added:
private List<string> testfiles = new List<string>();
Then after var files i did:
testfiles.Add(files.ToList()
But this is wrong. I just wanted to see in testfiles what items i'm getting in var files in the end of the process.
Both var files and directoryListing are IEnumerable<FTPListDetail> type.
The most important is to make the number 1 i mentioned and then to do number 2.

Risa no.
What i mean is this. This is a screenshot of my ftp server at my host(ipage.com).
Now this is a screenshot of my program and you can see that in my program i have only the directories hello stats test but i don't have the files in the root: htaccess.config swp txt 1.txt 2.png....all this files i don't have it on my treeView.
What i want it to be is that on my program on the treeView i will also display the files like in my ftp server.
I see in my program only the directories and the files in the directories but i don't see the files on the root directory/node.
I need it to be like in my ftp server i need to see in my program the htaccess 1.txt 2.png and so on.
So what i wrote in my main question is that in the var files i see this files of the root directory i just don't know to add and display them in my treeView(my treeView is treeViewMS1).
I know i checked in my program in the method CreateDirectoryNode i see in the first iteration of the recursive that var files contain this root files i just dont know how to add and display them in my treeView.
On the next iterations when it does the recursive it's adding the directories hello stats test and the files in this directories but i need it to first add the root files.

When I first turned on iMovie all videos from iPhoto automatically were found. Now I have more videos on iphoto, how do I get iMovie to find the new ones?

When I first turned on iMovie all videos from iPhoto automatically were found. Now I have more videos on iphoto, how do I get iMovie to find the new ones?

jtcollins wrote:
if iMovie is open, connect your iPhone to comp. iMovie '11 will now find your phone and look for videos as it would if camera was connected
(Underline is my emphasis)
Hi jt - Alex was actually referring to video clips in iPhoto not appearing in the item "iPhoto Videos" in the Events Library in iMovie - thanks for your post though (the 2 words are very similar).
John

How do i get my photos to stream to my iPad in the events that were oringally created. Right now they are streaming as photos and are not grouped at all. I would like to get them back into the events that were originally created

how do i get my photos to stream to my iPad in the events that were oringally created. Right now they are streaming as photos and are not grouped at all. I would like to get them back into the events that were originally created

Hi..
Thanks for the reply..
My original I Phone 5 was running IOS 6.12
My I phone 5S currently runs IOS 8..When I upgraded it, it had IOS 7 on it which made the I Photo app compatible with everything below IOS 8...( which the photo app is not compatible with ) so I just connected the I Phone 5S to my computer and thinking the new phone had IOS 7 on it that these was nothing to worry about..I thought all 900 + pictures in the photo stream would transfer but somewhere in the process, I Tunes decides to just go and install IOS 8 which requires that you run a " Photo Migration App" to transfer photos from IOS 7 & below. The problem was is that I didn't want IOS 8 on my new 5S so I thought I wouldn't have to do that part..
Anyway the phone emerged with IOS 8 on it and the only photos that remained were the ones that were actually on the phone..The 900 + I had in the stream didn't transfer because the Photos that works on IOS 7 and below isn't compatible with IOS 8..I guess you have to use the photo migration app that comes with IOS 8 & I phone 6..But I didn't ask to upgrade to IOS 8...It just did it on it's own!
I still have the I Phone 5 Back up that I did just before giving it back to Verizon but if I try to restore the I Phone 5S running IOS 8 those photos in the stream will not go back on the phone because IOS 8 isn't compatible with the I Photos" that ran on IOS 7 and below..
So I have an I Pad mini that runs IOS 7..should I try and erase it...and put that I Phone 5 backup on it and pray the photos that were in the stream come back on it so I can transfer them back to my computer...then erase the I pad mini again and restore it using it's original backup that I have on the computer and the in the cloud?
I know this sounds confusing but I'm at a loss as to what to do..This is what I found ...http://support.apple.com/en-us/HT201386
but it doesn't help me..
Steve

How can I get a file to copy all of the files in a directory except itself and the source of the copy function will be the directory the final program is in?

How can I get a file to copy all of the files in a directory except itself and the source of the copy function will be the directory the final program is in? This application must be in Lab View 8.

you mean something like this (see below)?
Now you may have to implement code to check if the destination folder exists and to create it, etc. But if you use the Front Panel Control to select the destination folder, it should be okay.
Not the best implementation, mind you but you'll get the idea..
Message Edited by JoeLabView on 04-18-2007 03:43 PM
Attachments:
copy folder contents.PNG ‏10 KB

"The file 'iTunes Library.itl' cannot be read because it was created by a newer version of iTunes." Updates were only offered by Apple when I'd open iTunes. Now I can't open iTunes. How can I access the newest iTunes as an update, not a new program?

"The file 'iTunes Library.itl' cannot be read because it was created by a newer version of iTunes." Updates were only offered by Apple when I'd open iTunes. Now I can't open iTunes. How can I access the newest iTunes as an update, not a new program?

this just started w/ me yesterday. I was running 10.5.3, and nothing changed - the message just appeard out of nowhere. I update to the latest iTunes 10.6 but the message is the same.
Sounds like probably some sort of Library file corruption.
The two options available in the message box are "Download" and "Quit". Download is useless because I'm already running the latest. Quit is pretty useless.
I was going to just create a new Library and re-import all my music. Of course, all my iPhone sync settings are going go have to be recreated.

File Adapter polls all the files from the directory when deployed again

Hi,
File Adapter polls all the files from the inbound directory irrespective of the timestamp when deployed again.
For ex. when the BPEL process with file adapter is deployed, it starts polling the directory based on the timestamp as and when the directory is written with the files. I did not opt for deleting the files after read by the File Adapter.
But, when BPEL process is modified and deployed again, this time, the file adapter picks up all the files in the inbound directory and doesn't consider the timestamp.
My guess is that it should not pick all the files but based on timestamp only.
I guess I can observe the same behavior if I bounce the Application Server also
Do I have an option to achieve this?
Thanks,
Sasi Bhushan.

try this:
1- create a File object for the directory. (look at isDirectory() )
2- create a File[] that represents the files in that directory. (.listFiles())
3- if (file[x].isDirectory()) {recursive method call;}
4- else {
process file;
If you want more help--do some work on it, and come back with specific questions relating to specific lines in your code and specific error messages you've been receiving.

Unable to Receive the File into Target Directory Using FTP

Hi All,
Here I Did Simple File-File Scenario With FTP.
Iam Able to Pick the File From the FTP Location And File has been Deleted From Source Location ( Set the Processing Mode as Delete ).
Unable to See the Pipeline Steps in Moni, But Able to Se the Success Message With the Inbound Payload only.
Also chked with the comm. channel of sender and receiver, where the sender shows the message process details but not the receiver comm. channel.
Regards
Giri

You Did the right thing in communication channel that u selected the IS.
Hi
Just check out if you sending the correct parameters and also check out the payload you sending and check out in SXMB_MONI for you message that after success wat is the payload and match with your input.
Rather, for input check, In IR, get the XML data from ur Message Mapping and then save it to your inbox that is input directory.
Also check out the permission of Output directory and also check the configuration of sender and reciver communication channel.
Regards
Aashish Sinha
PS : reward points if helpful

Remove age from birthday notification: I don't know the years most of my contacts were born, so I keep getting a default year 2000 birthdate. How can I turn off the age (xxth birthday) in Birthday Calendar - it really is very annoying!

I don't know the years most of my contacts were born, so I keep getting a default year 2000 birthdate.
How can I turn off the age (xxth birthday) in Birthday Calendar - it really is very annoying!?
Thanks
Tim

Where do you see the default birthday showing as Nov. 30? If you can explain that, I can probably modify the below script to do that clean up.
In response to the original problem:
I'm not sure why I missed the original reply, but here is an Applescript that will change all the years of any selected contacts to 1604 (default for no year).
tell application "Contacts"
          set thePeople to selection
          repeat with aPerson in thePeople
                    set theDate to birth date of aPerson
                    if theDate is not missing value then
                              set the year of theDate to 1604
                              set birth date of aPerson to theDate
                    end if
          end repeat
end tell
copy and paste it into a new Applescript Editor document. Select all the contacts you want to change (in Contacts), then run this script by clicking on the green Run button in Applescript Editor.

HT201302 When I am trying to import pictures from my iphone to PC, I get the message'No new pictures of videos were found on this device'. There are lots of pictures which i can see on the iphone. I have a 4S. Is there a way to get around that?

When I am trying to import pictures from my iphone to PC, I get the message'No new pictures of videos were found on this device'. There are lots of pictures which i can see on the iphone. I have a 4S. Is there a way to get around that?

It sounds like you are using an application to import. You can do it manually.
Start > Computer (on the right) > scroll to the bottom and you will see your iPhone under Portable Devices > Open it and you will see a Drive, open that and there will be a DCIM folder. That is where your photos will be (There may be other folders each holding photos).

My mp3's were in a seperate directory. Now, all are transferred to iTunes Media. How can I return the files to the directory??

Similar Messages

Maybe you are looking for