My mp3s are stuck in limbo

I am trying to avoid restoring my 5th Generation 60 gig iPod...but I fear the worst, here is the situation.
I took my iPod off of a dock after listening to it, went to the artists section to pick something else, and there was nothing there all of a sudden. I hooked it up to my iMac (powerPC G5), it says, "iTunes cannot read the contents of iPod, go to the summary tab...click restore..."
When I disconnected my iPod and access settings/about/ it shows no songs but that there is only 3 GB left available. This leads me to believe the data is still stored, but just not appropriately being read? Any advice? Can this be salvaged without a complete restore? please help

I probably didn't explain the problem clearly. 
When I open an event I would like to see the collection of photos, in thumbnail version.  Since last night, the photos are in the large view - one photo at a time.  I have to scroll through them to find the photo I want.  This is the case in all of my events and albums. 
When I go to the view tab and click on thumbnails, the options are unavailable - they are there, but are light grey and they aren't accessible when I click on them.
When I refered to my photos being stuck in the editing view, I should have said they are stuck in the large view, showing one photo at a time only.

Similar Messages

  • Fidelity Amex - Stuck in Limbo

    Hi, I'm stuck in an unbreakable loop and I have no idea how to fix it after calling in 20+ times and spending 6+ hours on the phone. Last week, I applied for the Fidelity Amex card. It said under review. I called the EO the next day and they told approved with a really low CL. I got the card Monday. Attempted to activate it, automated system did not go through. Call sent to a rep, which used some backdoor system or something and got it activated. Tried a 50 cents charge on Amazon and it went through. Next I tried to register the card on the website on the back of the card, fiacardservices.com. Said couldn't match my info and I called the number. Rep said couldn't find any info under my account # or social, got my calls forwarded for about 3 hours until I ended up at approvals. They told me it wasn't their problem since my card was definitely approved. Ended up calling in again and finally landed at a guy that knew what he was doing and he found my info and then put in a data merge request or something like that so it work within a max of 48 hours. It's been more than that and it still won't allow me to register. Called in a few more times, NetAccess always tells me that no system they have will pull up my credit card nor social, I get sent to credit card rep, which after about 15 minutes will find my info with this "other system" at my insistence, but then tell me they can't do anything with online access. Now all the reps say they can't find the notes from that one guy that knew what he was doing. On top of that, if I get placed on hold for longer than 30 minutes, their system will drop the call automatically. This is getting ridiculous, first they insult me with a ridiculously low credit limit (less than 2% of my income, rest of my cards are 5-7x higher CL), and now I'm stuck in limbo wasting 6 hours of my time. Can anyone here give me a few pointers on what to do, besides cutting up my card and tell them to go screw themselves?

    Yea, and in case anyone ever finds this thread in the future and runs into this problem, after the events in the OP, I ended up spending another 3 hours getting bounced around, till I landed at a specialist that knew which department can actually fix it. Different people in the same department are at varying levels of competence, so one guy might tell you he can't do anything, another will tell you it's another department's problem, and then when the full cycle circles back to another guy in the same department, he'll actually know what to do. Be sure to ask for the phone number for the department you are being redirected to, before you allow them to redirect you, since there is a 50/50 shot of getting randomly disconnected on the wait. Plus it makes it easier to try your luck for someone competent. You can call the specialists at 1-800-933-6262 to be redirected to the people at 1-800-601-3741 to add your SSN to your profile. I called in twice to that second number and the first time some guy that sounded like he was out of breath grumbled over the phone that he can't do anything like that. I hung up and called the number again and the second lady actually knew what to do. They kept telling me that it would update within 48 hours, but I've been checking everyday and today it finally went through after I called the card department wanting to rip someone's head off. They said they couldn't do anything but magically after the phone call I was able to register an online account a full month after I applied for the card. I'm going to look forward to this quality customer service and I'l pray to the old gods, the new gods, and even the Lord of Light that I don't have to call in again.

  • In my iTunes on the iPad I've got 95 items that are stuck and I tried swiping them to delete them but it doesn't work dose any one know how to empty the download tab

    In my iTunes on the iPad I've got 95 things that are stuck and I tried swiping them to delete them but it doesn't work dose any one know how to empty the download tab

    Thanks, but, using the "free" version of Reader, there is no opportunity to open nor import the xml data - the menu options do not exist - there is no import listed.
    If we try to open the xml file directly, then we get an error - something to the effect of "unsupported file type, or the file is corrupted".
    I just noticed in my Pro version that there is the command File ->Form Data ->Import Data to Form... command. Is this what you are referring to?
    What do you recommend? Perhaps the easiest thing to do would be to purchase a few copies of Acrobat Pro for the reservations people to use? I was hoping that the free version of reader would do it, but perhaps not?
    Thanks again,
    Rob

  • My photos are stuck in the editing view

    All of my photos are stuck in the editing view and I am unable to return to thumbnail view.  I can move to different "events" and photos, but they are all in the editing view.  When I select view and then go to thumbnails, the options are unavailable.  Does anyone know how to fix this?

    I probably didn't explain the problem clearly. 
    When I open an event I would like to see the collection of photos, in thumbnail version.  Since last night, the photos are in the large view - one photo at a time.  I have to scroll through them to find the photo I want.  This is the case in all of my events and albums. 
    When I go to the view tab and click on thumbnails, the options are unavailable - they are there, but are light grey and they aren't accessible when I click on them.
    When I refered to my photos being stuck in the editing view, I should have said they are stuck in the large view, showing one photo at a time only.

  • ASR Hyper-v (VMM) to Azure and we are stuck with this error while preparing the VMM Server

    We are stuck with this error while installing ASR provider and registering with Azure Vault, can i get some help on this
    Error:
    NO Vaults could be retried for the registration key. Please ensure that
    1, your registration key has not expired.You can re-downloading registration key from Azure site Recovery portal
    2, Your system clock is not out of sync with the selected system time zone
    System Clock is set to IST and Azure to southeastasia

    Hi,
    Could you please ensure that you have downloaded the latest registration key from the portal?
    Also ensure that the machine from where you are accessing the portal and the VMM server has the right time according to your time zone.
    Thank you,
    Ruturaj

  • App store and itunes store are stuck in Japanese store. Says: Account not in Store. Your account is not valid for use in the Japanese store. You must switch to the Philippines store before purchasing.

    My app store and itunes store are stuck in Japanese store. I already moved to the Philippines for about a year ago and my stores still won't change its location.
    I already changed the region/country in my apple id. I tried to sign out and sign in back to my account. Tried it in app store, in itunes store, in settings app, in itunes in my laptop, in the apple website. It shows that my apple id is already set to Philippines, no matter where I sign in my account.
    The problem is when I open my app store (or itunes store) in my iphone, it appears that it is in the Philippines store; however, when I sign in my account (and I tried to sign in everywhere), I cannot download any app from the Philippine store. When I try to download an app, it always says "Account not in this store. Your account is not valid for use in the Japanese store. You must switch to the Philippines store before purchasing." I have read everywhere and most of the answers say that it should automatically direct me to the correct store. It doesn't happen to me, apparently.
    I have the same problem in both my iPhones. Both are iPhone 3GS and in version 5.1.1. I don't want to upgrade to iOS6 so please don't tell me to do so. Thanks!

    try logging out of of store and then log in again
    and check this out
    http://support.apple.com/kb/HT1311

  • Can't restore 9.5, can't uninstall, stuck in limbo!

    I should have known better. I had acrobat 9.5.2 installed, and was perfectly happy with it. I could view PDF docs, and scan from my scanner directly to a PDF document. Then after weeks of the updater reminding me, I finally let X1 install. Much to my dissapointment I could no longer scan directly to PDF fioles from my scanner. So all I wanted to do was "go back", and this is where the trouble started. My machine is Win-XP pro SR3. I used a windows restrore point to go back to the day before my X1 upgrade. After doing that, acrobat 9.5x seemed to work again, and I could now scan to PDF again from my scanner. I thought I was done. But then, after viewing a document in acfrobat, I realized that a lot of features wouldn't work, and I'd keep getting complaints about plugins missing. So next, I downloaded the full install for Acrobat 9.5.2 from adobe and tried to install from scratch. It would get tp about 96% complete, and then fail with a box saying "the product is already installed". So next i went to the windows control panel and tried to remove acrobat, figuring it would install better if it was first completely removed. But the uninstall failed. Upon attempting to eremove acrobat (listed as adobe reader 9.5.2), an alert comes up saying "The patch package cannot be opened". So now I'm stuck in limbo, and I'll probably need some expert help to manually remove the product from my system, or find a way to fix it. Naturally when I got on the adobe chat line, I was basically told they wouldn't support anything but the latest product.

    Well thanks. Good to know its a registry cleaner, because cleaning up all remnants of an applications registry entries by hand is very tedious. But a registry cleaner is not a full uninstall, right? And for now, as i said, I did manage to fix my 9.5.2 installation.
    As far as the the versions and names, I've probably added to the confsion here, but in my defense let me explain that if you give me a product and call it "X", and after some upgrade it becomes known as "Y", you can see where a customer like me would be challenged to not think of them the same thing. And this time a programmer may have missed an instance of the name "acrobat" when the code base was borrowed. You see, it is indeed Adobe Reader 9.5.2 when you pull down the "help->about" menu. But, I also have an all-in-one Lexmark printer that has scanning capability, and when you use it, it downloads a list of available applications from the target computer that can accept the raw scan data. ACROBAT READER was one of them, and thats what "Adobe Reader" broadcasts to the scanners as an available scan application. This is what I've always used to scan documents and convery them to a PDF file.
    So... when I first upgraded to Adobe Reader X1, I lost my ability to scan to "Acrobat Reader" after it deleted files related to "Adobe Reader 9.5.2". And just FYI, it was NOT replaced by a new Adobe Reader scan application, so I lost my ability to "scan to PDF". When I subsequently backed out X1, and restored (and subsequently repaired) Adobe Reader 9.5.2, everything worked fine again, including the ACROBAT Reader option broadcast to my scanner (printer). So just to be clear, it is Abobe Reader 9.5, (and several versions prior incidentally ) that has carried over the word "acrobat", by sending this name as a potential scan application target to my scanner.
    I'll be happy to provide you any other particulars you might want, if it might help others in product support. But as for my current issue and situation, the problem was solved, even if by a round about way. Now I certainly would try completely uninstalling it and re-installing from scratch when I have time and have a clone ready to reverse whatever happens if it doesn't work out. But the fact is I still can't! The add/remove programs operation in my control panel still says that "patch package" is missing when I try to do an "uninstall" or "change", and you've just told me that the cleaner will only clean the registry. So it seems I have a situation where at this point, my adobe reader 9.5.2 works, and the only thing I can't do is uninstall it. Remember I mentioned that the X1 install attempt merilly deleted tons of files, and I geuss one of them was the uninstall script.

  • Messages are stuck in SMQ2

    Hi,
    Our messages are stuck in SMQ2, and I think this is due to high volume of messages. I have configured the IS to allow the QRF_RESTART_ALLOWED to 1, and scheduled the RSQIWKEX job to run periodically. But, the messages are still stuck in SMQ2.
    Does anyone know what are the next steps we should look into to solve this problem?
    Any help is greatly appreciated.
    Thanks,
    Karma

    Just try - go to SXMB_ADM->Manage Queues and Deregister all the Queues. Then go to SMQ2 and try to activate all the queues by selecting the each lines and with activate button.
    Then re-register the queues in SXMB_ADM and chek it..
    Problem may be because of workprocess related. Also check transaction ST22 for if any dump in XI box.
    btw what is the scenario ? Is it because of huge message processing ?
    Regards,
    Moorthy

  • Messages are stucked in EOIO Backlog, please help me...

    Dear Expert,
    I am facing an issue the messages are stucked in EOIO Backlog, Those stucks are not flowing. why it is stucking in Engine status or backlog monitor.
    and how it will reprocess those messages.
    Regards,
    Kiran Polani

    Dear Friends,
    Actually we developed an Idoc to soap synchronous using BPM in sap pi 7.0. suddenly required changed in field lever at sap r/3 side that's why we stopped communication channel for that interface.
    But when we are stopped that interface it is stuked in EOIO Backlog and it is stayed in Holding state. Daily the message count is increasing. But here from sap they are triggering data for same idoc.
    For that i have discussed with our team and deleted that interface in existing production enviroment.
    now those signals are not stucked in Engine status EOIO Backlog. But my problem is how to delete or cancel existing not flown EOIO messages in Engine status.
    Please find the screen shot for your reference.
    Regards,
    Kiran Polani

  • Why won't my apps update now that I have updated to iOS 7? The are stuck in "waiting." And how do I fix it?

    I updated to the iOS 7 and now several apps, iBooks included, won't finish the update. I can't delete and re-download because they are stuck in "waiting." Also, I can't seem to reload apps sent to cloud back to my phone.
    Storage isn't the issue because I have checked that. Or at least in the surface it doesn't appear to be. Any other trouble shooting ideas are appreciated.

    I found that what worked to correct this issue on my iPhone 4S was to turn off automatic app updates. I went to Settings - iTunes & App Store - and under Automatic Downloads, switched Updates to off. My apps that were stuck in 'Waiting' immediately began downloading.
    Although I would like to be able to use the automatic update feature, at least I found a fix to the 'waiting' issue for now.

  • I was in the middle of updating to 7.0.3 and Itunes stopped working. Now my phone is stuck in limbo (apple logo with status bar under) My power button doesnt work (of course) How do I get it back to normal?

    I was in the middle of updating to 7.0.3 and Itunes stopped working. Now my phone is stuck in limbo (apple logo with status bar under) My power button doesnt work (of course) How do I get it back to normal?

    I have same issue. I click on the home button and Wake/sleep at the same time for 30 seconds or more and then the phone entered in Recovery mode. It is erasing my content now and installing the update. Let´s see how this ends. I have iCloud, iTunes match, and backups from previos versions, hope I can restore all my content.
    Otherwise I´ll go to the Genius Bar to do a checkup.
    Good luck!
    It did not work the first time... The iPhone4 kept in limbo. Then I did disconnect as suggested above and tried again to enter in Recovery mode.  This second time it works. And after restoring the iPhone4 with 7.0.3, it asked me if I want to recover from backup. I did recover from my latest back up and now it is syncing the content.

  • Certain web pages are stuck in large text in Safari

    I've been having this issue since I got my Air last year.  Certain web pages (MSNBC and Google to name a few) are stuck in really large text.  Other web pages are fine.   I've tried resetting th browser, deleting cookies, etc.  But I cannot seem to fix this issue.  Anyone have any ideas?
    Thanks

    Sorry.  I poked around furhter and finally found the issue.  The font sizes were too big!  Not sure when I could have done that, but there you go.  This question can be closed down.

  • HT1725 My app downloads are stuck waiting. There is no 'downloads' tab in iTunes. Very aggravating

    My app downloads are stuck waiting. There is no 'downloads' tab in iTunes. Very aggravating. I sign into iTunes. No download tab. I sign not App Store. No download tab. 2 apps stuck on 'waiting'. Have reset iPad2 - no progress.

    Also, I'm unable  to delete the 2 apps. So they just sit there taking up space.
    I'd like to at least be able to start the downloads or delete the apps. I can't do either.

  • PO Receipts are stuck in RCV Interface tables with Status as LC_PENDING

    Hi All,
    I need urgent help in fixing the following issue in Purchasing. We are on R12 and we have LCM integration implemented with Purchasing.
    Right now PO receipts are getting stuck into RCV_HEADERS_INTERFACE and RCV_TRANSACTIONS_INTERFACE tables with PROCESSING_STATUS_CODE as LC_PENDING and TRANSACTION_STATUS_CODE as PENDING after running the Receiving Transaction Processor (RTP).
    I understand that this means the receiving is not yet complete, and record is pending for Landed Cost integration, you must have done receipt in LCM (Landed Cost Management) enabled inventory organization.
    I have also gone through the Metalink "EBS LCM : How To Diagnose Issues With Landed Cost Management In Procure To Pay Cycle[Article ID 860747.1]"; but could not make out what could be the possible fix to resolve this issue.
    And also how to process these PO receipts by running Receiving Transaction Processor.
    Any help or guidance is appreciable. Need to resolve these urgently as lot of transactions are stuck and our year ending is close by.
    Thanks

    Hi,
    Can you let me know what the process for receiving is after the transactions are LC_INTERFACED? I'm new to Landed Cost Management and would appreciate your quick help...

  • How do we identify SC that are stuck in awaiting approval status?

    All,
    Extended Classic Scenario   7.01
    We have Shopping Carts set up for auto approval.    From time to time some Shopping Carts get stuck in awaiting approval status and we need to manually force them to go.   We have not been able to identify a root cause for this so we would like to create an abap that would identify those SCs that are stuck then submit   BBP_REQREQ_TRANSFER   to transfer those SCs.
    The problem we are having is finding the correct combination of status's that will capture those SCs that are truly awaiting approval. 
    We first find all those SC with status = I1015 (awaiting approval)
    Then we exclude  those with status i1040 (deleted)  and i1129 (followon document created)
    It seems in our testing that sometimes the status i1129 has an "X" in the inactive column.   Should those then be reprocessed and therefore not excluded? 
    Thoughts...
    Sandra

    Hi Sandra,
    For your code logic, I1129 with inactive X should be included to get the list of SC which are in awaiting approval or may be approved but without follow on doc.
    But could you check if you get any message in RZ20 after the follow on doc is created and it becomes inactive ?
    may be you can check the SAP note: 1499352 - SRM Transfer: Redesign, bug fixes
    Best Regards,
    Anil

Maybe you are looking for