My old phone broke and I am having trouble figuring out how to restore my contacts on my "new" phone (LG ENV2 Black)...

My old phone broke and I am having trouble figuring out how to restore my contacts on my "new" phone (LG ENV2 Black).  Apparently the phone is so old that I am unable to install Backup Assistant on it, which sucks.  I have all my old contacts saved on my computer as a CSV and also another copy on a micro SD as VCF.  I have tried moving the CSV from my computer to my ENV2 via both Bluetooth and USB cable, but had no luck with either of those.  I also tried to pop the micro SD into the ENV2, and although I can load all my old pictures/videos/etc. from the micro SD, I do not seem to be able to restore the contacts from card.  I know there has to be some way to manually transfer these files; the contacts are still on my old phone as well; but I was unable to use the transfer wizard for that because my old phonedoesn't seem to be supported by that (Pantech Jester 2)

Google a program called bitpim, that might do what you want.  Never used it but it's been talked about on the forums.  Other than that you might have to input them manually.  Mary

Similar Messages

  • Having trouble figuring out how to forward text messages.  Can someone tell me how to do that?  Where the forward button.  You used to be able to hit forward and put radio button on all the messages.  The screen looks blank to me.

    In the new iOS7, Having trouble figuring out how to forward text messages.  Can someone tell me how to do that?  Where the forward button.  You used to be able to hit forward and put radio button on all the messages.  The screen looks blank to me.

    In the new iOS7, Having trouble figuring out how to forward text messages.  Can someone tell me how to do that?  Where the forward button.  You used to be able to hit forward and put radio button on all the messages.  The screen looks blank to me.

  • Having trouble figuring out how to save the original photo after I've cropped it - i.e. I want to create a headshot of my husband from a photo of the two of us, but I also want to keep the original. Seems very basic, but can't seem to figure it out. Any h

    Having trouble figuring out how to save the original photo after I've cropped it - i.e. I want to create a headshot of my husband from a photo of the two of us, but I also want to keep the original. Seems very basic, but can't seem to figure it out. Any help would be great!

    Use File >> Save As
    Choose a different file name so as not to overwrite the original and don't save any changes when closing the original.

  • We want to transfer the music library on our Mac to a second ipad without transfering any other data.  we share an itunes account and I just can't figure out how to get the music onto the new pad

    Hello friends
    We are trying to move our music library stored on the Mac to a second ipad.  We have already set up the second ipad and are only interested in getting select music onto the second ipad.  When we plug the ipad into the imac and connect to iturnes it wants to set up or restore the second ipad.  We're afraid if we do this it will remove all current information on the second ipad.  Thanks

    Did you ever resolve the iCloud problem.I am in the same position and its driving me mad!!! If you have a link to an solution I would appreciate it.

  • I am having trouble figuring out how to get a date to show on a report

    Hi,
    I have a query with a structure on both my rows and columns.
    In my columns, I have my key figures and on them are period/year restrictions.  For example, the first column is the current fiscal period/year - 1 period, the next column is the current fiscal period/year - 13 periods (so I can compare this year to last year)
    On my rows, I have a structure that is listing sales where on each line, I am restricting by groups of accounts.
    What I need on my report is a header stating what the time period of the report is for.  That is, the restriction of the current fiscal period/year -1 that is being placed on the first column also needs to be up in the page heading.
    This is going to be hard to explain but here goes.  My columns are reporting key figures constrained by time.
    <page header>
    REPORT: XXXXXX
    REPORTING FOR: Per/Yer  (Which is equal to the date restriction that is on the first KF column, that is curr yr/period - 1 period)
    <report body>
    SALES GROUP /  RPT MONTH  /  LY
    Mens  /  amount (restricted to curr year/period - 1)  /  amount (restricted to curr year/period - 13)
    Womens  /  amount (-1)  /  amount (-13)
    Childrens  /  amount (-1)  /  amount (-13)
    I tired adding it to my row structure but since my KFs are constrained by per/year, I can not drop per/year onto my rows.
    I tried to add a column showing time but BEx wants me to add a key figure (since the columns have key figures in them) so that does not work either.
    How can I get the value of "current period/year - 1 period" to be part of the data (not a label) in the query so that I can put it into a header on my report.
    Thanks for your help!

    Hi,
    Click on Query Property,
    In General tab of Query Property, select New variable at Discreption.
    Give Discription and technical name. Select Processing type Replacement path. select Reference Characteristic year/period. In replacement path tab, Select variiable with-  Variable and Select your variable(which will give you previous fiscal year/ period- already exist or you have to create to get previous fiscal year period) and select Replace with - Label. Assign this variable in your query discreption

  • Having trouble figuring out how to use trigger inputs as a general purpose input.

    I'm trying to use "Trigger 1" as a general purpose input to indicate the status of external circuitry. I can't seem to get the "Read High-Speed Capture Status" to indicate anything. I'm using the "Configure High-Speed Capture" VI with the capture mode set to Inverting Digital Input, and that VI feeds into a Do-While loop which contains the "Read High-Speed Capture Status" VI, which has the Ret Vect set to 0. I see from the online help that the High-Speed Capture function is available on Servo and Closed-Loop stepper systems, which I suppose is to enable the ability to read the position of the encoders. I'm using an open loop stepper system, so are these High-Speed Capture fun
    ctions unavailable even though I'm looking only for status (Trigger 1), and not concerned with reading position? Thanks in advance, Rob.

    Thanks for the answer Ken. I'm going to try a different workaround. The global was too slow, and I think I'll break my subVI into two parts. I'll create a sub that has all the setup stuff in it, then embed the actual "check trigger status" loop in the main VI. The loop contains only 2 or 3 nodes. Too bad LabView works this way. I can see one reason it should, but another larger reason it shouldn't. Wishlist.... Oh, speaking of wishlist, I like the improvements that 6.0 has brought, but one thing still bugs me. There's no way to have LabView remember the place to look for files when it's first started. It defaults to "My Documents", which should be, as all LabView programers know "LabVIEW6\user.lib" (or whatever). Of course, once th
    ere, LabView remembers for that session. Next time it's started, back to "My Documents" again. How 'bout fixing the "Options", "Path" settings so that it will actually remember the path set? Am I missing something here, or does it have anything to do with the fact that we're using Windows 98? My buddy's using NT, and his works the same. Is there a way around this? TIA, Rob.

  • I changed my comcast password (on my iPhone) and now am having trouble sending out emails from my Mac

    I changed my comcast password (on my phone) and now am having trouble sending out emails from my Mac.

    Did you change the password on your Mac as well? Go to Mail / Preferences / Accounts and change it there too.

  • Photostream Issue - I have had several phones over the years all backing up via iCloud/Photostream. It seems that the oldest of my photos and videos are simply gone and I cannot seem to figure out how to get access to them. Why is this happening?

    Photostream Issue - I have had several phones over the years all backing up via iCloud/Photostream. It seems that the oldest of my photos and videos are simply gone and I cannot seem to figure out how to get access to them. Why is this happening? Is there anything I can do to get them back? I'm freaked out by the thought that I am paying for what I thought was a safe place for my photos to be stored and accessed later but now see that there are nearly 500 pictures/videos gone from my photostream folder. Any help would be greatly appreciated. Thank you. - Michael

    Hi newmarket,
    Photo Stream is not a respository for archiving photos. It is a cloud storage device that will store the last month or last 1000 photos taken by any device on the same Apple ID, and then will "share" those photos with all other devices that have Photo Stream turned on,and that are logged onto the same Apple ID.
    iCloud backups will contain all of the photos that were on your camera roll the last time you backed up your device.
    If you have photos outside of the Photo Stream parameters, and they are not all on your current camera roll, then you have no way to retrieve them unless you have imported them to the computer you sync with or have uploaded them to some other cloud service like DropBox.
    Sorry,
    GB

  • I just got a new 4S, but cant figure out how to get the contacts from my old 3GS to my new phone via ITunes. Help!

    I just got a new 4S, but cant figure out how to get the contacts from my old 3GS to my new phone via ITunes. Help!

    You should have been syncing your contacts with your computer all along.
    Have you failed to do this?
    iPhone: Transferring information from your current iPhone to a new iPhone

  • Does anyone know of an e-reader app for the iphone that has text to speech capability? I have a Kindle 3G that can read whole pdf documents and books but I cannot figure out how to do it on my iphone 4.

    Does anyone know of an e-reader app for the iphone that has text to speech capability? I have a Kindle 3G that can read whole pdf documents and books but I cannot figure out how to do it on my iphone 4.
    All of the apps I have found on the App store either do not have the text to speech capability or if they have it they will only read a page at a time or simply read the text you paste into their window. I really do not understand what is so difficult about having this feature as Kindle provides it--though Amazon does not make the feature available on its iPhone 4 app.
    Please help.

    thanks. yes i am aware of the VoiceOver feature but it is NOT the solution to my problem. as you said, it is a solution to a different set of issues. i want the text to speech ability because i there are books i need to read but do not have the time to sit down and read them and have become used to listening to them read to me either by a professional human reader or with the text to speech software on the Kindle.
    I think Apple makes the best audio devices but i am really disappointed in this inexplainable shortcoming. if apple can give us siri they ought to be able to design a nice little button that i can push to turn on text to speech while i am in a document, book, magazine or webpage. clearly it is possible as apple has added the "reader" button in safari to have web pages dropped into the reader format.
    thanks for your suggestion though, it is what everyone suggests but it does not address the issue.

  • I would like to print a four sided programme, but am having trouble finding out how to organise the sections onto a 17  by 11 paper with the sections in the right order. Any help?

    I would like to print a four sided programme, but am having trouble finding out how to organise the sections onto a 17  by 11 paper with the sections in the right order. Any help?

    If all you are going to do is print double sided and them make
    a single fold reducing the page to 8 1/2 x 11, one side of the
    original 17 x 11 page will be page 4 on the left as you hold
    the page facing you and page 1 on the right, reverse side
    should be printed so top is same as top on the the first side
    and will be page 2 to the left and page 3 to the right. Pick
    up the double sided document with pages 2 and 3 facing you, fold
    left edge to meet right edge; you should now have fold on the left
    with page 1 facing up toward you, turn the page as you normally
    would and pages 2 & 3 should be in order, and one more turn brings
    you to page 4 and the fold should know be on the right. I hope this
    explains clearly enough - if not, post back and some one should
    join in with a better explanation.

  • How to restore iCloud backups on a new phone?

    How to restore iCloud backups on a new phone?

    The only way to access iCloud backups is to Erase all content and settings, go thru the setup assistant, and when prompted to restore from iCloud backup - choose that option.
    HTH

  • I can't figure out how to get my contacts from my phone onto my mac book pro

    i just got a mac book pro and am trying to use icloud but i just cant figure it out. i've downloaded the newest versions of everything and authorized the computer and everything that i've been told to do, but i still cant figure out how to sync my contacts to the MBP. HELP?

    Do your contacts appear at http://www.iCloud.com after signing in?
    If so, you just follow the iCloud Setup instructions here: http://www.apple.com/uk/icloud/setup/mac.html

  • I bought the photoshop install online and I put it on my laptop. But now I have a new and better computer for photo and video but I can not figure out how to reinstall my photoshop on this new computer. When I bought it, they said I would be able to insta

    I bought the photoshop install online and I put it on my laptop. But now I have a new and better computer for photo and video but I can not figure out how to reinstall my photoshop on this new computer. When I bought it, they said I would be able to install it on 2 different computers. PS they are both PC computers.

    Downloadable installation files available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  13 |12 | 11, 10 | 9, 8, 7
    Photoshop Elements:  13 |12 | 11, 10 | 9,8,7
    Lightroom:  5.7.1| 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5
    Contribute:  CS5 | CS4, CS3
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.window using the Lightroom 3 link to see those 'Important Instructions'.

  • The basic module in Lightroom 5 has disappeared and cannot figure out how to restore it.  Removed by Moderator

    The basic module in Lightroom 5 has disappeared and cannot figure out how to restore it.  This is a major part of Lightroom and am helpless without it.  I have a subscription to CC.  My EMail address i<removed by Moderator>.  I would appreciate help getting Lightroom  reinstalled.

    Uckwest for information on how to install the Photoshop Lightroom please see Install and update apps - https://helpx.adobe.com/creative-cloud/help/install-apps.html.
    Please be aware that you are posting in a public forum.  I have edited your previous post to remove your e-mail address and password.  There is never a reason to post a password.  Anyone who can assist you with a password has the ability to reset the password.

Maybe you are looking for