My pc connects to my new Optus wireless router but my Macs don't. I keep getting the message "The network "Optus mini modem" requires a password. It doesn't accept the password that works just fine with the pcs. Any ideas how to fix?
Can anyone help
I would restore the iPod to factory defaults/new iPod on your computer and start over. It appears the iPod is associated with another account. Any media that came with the iPod does not belong to you and di not transfer with the iPod hardware.
Similar Messages
-
I have a iPhone 4S and a Cannon Printer with AirPrint. I have the printer and the iPhone both on the same network, however I still can't locate the printer on the phone. Works just fine with the laptop on the same network. Any suggestions?
ok no problem! all i did was 1) set up the mobile hotspot on my phone. 2) turn it and wifi on on the phone. 3) connect the laptop/desktop to the hotspot network. 4) insert setup disk for the printer and begin setup. 5) complete the setup "using a usb cord to temporarilly connect the computer and printer" 6) unplug usb cable and finish set up on the laptop/desktop. 7) give it a few minutes to show up on the AirPrint menu on the phone. 8) that should be it. I unplugged the printer and plugged it back in, made sure the laptop was totally turned off AND disconnected from the network, and did everything I could to try and make it not work. The printer I have is a Canon MG3122, it doesn't have a fancy screen or even a way to input a password or anything like that, so it just strores a default network that it will connect to. in order to change networks i would have to complete setup multiple times. Since I only plan to use it with AirPrint for my mobile business....the one network is just fine! Hope this helps!
-
For some reason when i send texts now they are saying that they come from my email address. any ideas how to fix this?
Check Settings>Messages>Receive At>Caller ID, make sure it's set to your phone number not your email address.
-
Strange problem with project. Any ideas how to fix?
~
This problem occurred before the recent update, but persists after updating as well.
I had a project about 20 minutes long. Some time after I last exported it, it broke. At one point toward the end, when I play in the preview window, a four-second segment goes to black screen with "Source clip is missing." That alone is interesting, because I don't recall doing anything to move or delete the source.
But when this happens, the project window goes haywire. There is no longer a playhead, you can't see any of the clips after that point, the cursor stops working entirely, and iMovie all but freezes. The movie can continue to play, and you can stop and start play using the space bar, but everything else is hosed. The only way out is to quit iMovie and restart.
This behavior is persistent and completely reproducible.
Sadly, this happened before I backed up the movie. Not all is lost, though, for I have a version that is complete and functional up to the last segment, which is the one that broke.
Just wondering if anyone had any ideas as to what's going on, or perhaps how to fix it.
Thanks!
RobIf it's on a windows network you have to enter your (windows) log in (name/password) credentials.
This should be a 1 time event. It will remember it thereafter. -
I just upgraded my iPhone4s to iOS7 and now I am unable to make phone calls and send/receive text messaes. Network signal indicator on the upper left side of the display shows hollow circles instead of full circles (but with the network provider name). I checked with my colleagues in the office who use the same network and theirs work just fine on iOS7. Any idea how to fix the problem?
I have also called my service provider and my service remains active in the network. I tried removing and reinserting my SIM but to no avail.
-
Hey Guys!
I just got my AirPort Extreme Base, but I can't use my HP Deskjet F4580 wireless printer with it.
The printer is not connected to the AirPort Extreme's USB port. It is placed in another room, and I'd like to use it (the printer) wirelessly (not connected to the USB port os the AirPort Extreme), as I used to. There is no place for the printer close the AirPort Extreme. It worked just fine with my previous wireless router (Linksys WRT54G). I'm very disappointed with the AirPort Extreme Base Station because of that!...
Can you help me? Please?!
Thanks Folks!This must be a tough one, no suggestions at all.
-
I am having trouble with the "numbers" app on my MacBook Air. I go to print my document and that works just fine. I cannot however return to the document after printing. What do I have to do?
RR,
Not to worry, you're not the first to expect Print to finish by returning you to the edit mode. The thing is that Printing is so hit and miss with this version of the app, you will probably want to stay in the Print window for more than one attempt.
Jerry -
I get the following error message: Gone The requested resource / is no longer available on this server and there is no forwarding address. Please remove all references to this resource. Additionally, a 500 Internal Server Error error was encountered while trying to use an ErrorDocument to handle the request. IE & Chrome work just fine - and the previous version of Firefox (10.0.1) also worked. Looking for a fix or I will need to abandon Firefox. Thanks.
Reload web page(s) and bypass the cache.
*Press and hold Shift and left-click the Reload button.
*Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
*Press "Cmd + Shift + R" (MAC) -
I just bought a new MacBook Pro this summer and was all excited. But I'm very frustrated right now because I can't connect to any external monitors through VGA. My thunderbolt (DisplayPort Mini) to HDMI works just fine, but when I try with my other connector to go from Thunderbolt (DisplayPort Mini) to VGA, Nothing works. my screen goes blue and changes size like it recognized something but nothing is ever detected on the external moniter or projector. I'm not sure what is wrong but it's very frustrating. I'm just very depressed that it worked just fine with my 2-year-old MacBook Pro but isn't working now. I'm running OS X 10.8.2. I just upgraded yesterday from 10.8.1 but that upgrade did nothing to fix my problem. Can anyone help? Thanks
I am haveing this exact same issue. I have plugging in 3 monitors and tried two different VGA to mini displayport and nothing is working. I recently bought a Acer monitor and it work for an hour and now it back to doing the same thing.
When I plug the VGA adapter in to the monitor the monitor think its not connected to a computer then when disconnecting the VGA adapter the monitor thinks it is connected to a computer.
NEED SOME HELP!!! at the point of all my hair is pulled out.
^^^
that is the same problem i am having! if anyone can help that would be great i'm losing my mind over here -
What do I do if my iPod nano keeps syncing, resetting, and syncing and I cant add music to it? I've tried syncing my other iPod and that works just fine.
If it is a lightning to 30 pin adaptor, and you have a 7th Generation Nano it has to fit the Nano.
This is lightning to 30 pin adapter: http://www.bestbuy.com/site/Apple%26%23174%3B---Lightning-to-30-Pin-Adapter/6651 936.p?id=1218803450821&skuId=6651936#tab=overview
Is this what you bought?
You need to contact Sony and see if they model you have is compatible with the docking adapter. It may not be. -
I can't print. When I go to file-print, nothing happens. My printer is working just fine with IE and everything else.
Try the Firefox SafeMode. <br />
''A troubleshooting mode, which disables most Add-ons.'' <br />
''(If you're not using it, switch to the Default Theme.)''
# You can open the Firefox 4/5/6/7 SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut.
# Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. <br />
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shft key) to open it again.''
If it is good in the Firefox SafeMode, your problem is probably caused by an extension, and you need to figure out which one. <br />
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes -
My newly installed burner works fine from i-tunes, except the burned disk won't work in my car CD player. The old burner's work just fine in the car. Please help.
Using my new G5 I have the same problem, which I did not know using my old G4 with an external LaCie burner. The CD-Changer in my car is not able to read audio-cds, also my cd-player in my home hifi-system. The only way to play these audio-cds is (strange...) to put them directly in the main tuner of my car (usually used for the navigation cd), not using the Changer.
Maybe the problem really depends on the quality of the CD-Rs. I have used CD-Rs from Sony (it´s a brand, I think?) and will try Verbatim.
Regards, Horst -
I updated my phone to the iOS7 and now when i try to use the keyboard, i can't see myself typing and it goes very slowly. I am confused to why this happened. It worked perfectly fine with iOS6. Any suggestions?
Hi imobl,
Thanks for your response, I forgot to add that the five 3uk sims we have in use, I have tried all of them none of them are recongnised non of them have pin codes, I even purchased four more sims Tmobile (original carrier) Vodaphone, 3 and giffgaff. -
When trying to download the new iPhone version, I keep getting an error message that my network connection has timed out. Any ideas how to fix this?
This is asked and answered many time each day. The forum search bar is on the right side of this page.
Disable your firewall/security software and try again. -
i just installed mongolian cyrillic keyboard and it's working just fine with safari but i can't type on Word with it. please help me?
PS Here is a source for a keyboard. Try it if you have not done so already
http://m10lmac.blogspot.com/2012/12/new-mongolian-keyboard-layout.html
For questions about why Word doesn't do something, try
http://answers.microsoft.com/en-us/mac/forum/macword
Maybe you are looking for
-
Can anyone tell me how I find my balance.. This is crazy.. Every turn I take I have to input my itunes identity.. Its ******** this should be soo complicated or am I just an idiot?? If I am fine!! I still need help!! LOL !! I've tried to make a pur
-
Not sure where to ask this- printing multiple files with file names
Hi, Apologies if there was a better place to ask this question- I'm not sure which program I should be using to achieve what I'd like to do and I'm not sure if it's even possible. I'm currently working for a publishing house preparing images that wil
-
Correct values not flowing in MIRO when values are changed in J1IEX
D/ Friends, In Purchase Scenario with mov typ 101, when we capture excise duty thru T.Code J1IEX, sometimes we need to change the Duty Rates as well as Excise base Value (i.e.***. Value). We change these 2 things & we also change the BED, ECess & SH
-
Device will not show when iTunes is loaded and iPhone is connected
When I connect the iPhone to iTunes the device does not show. So now I can't sync my phone to iTunes. Can anybody help with this please?
-
We used to be able to sort by multiple columns/rows at once by right clicking on the header and choosing show more options-how do we do that in the new Numbers? It doesn't appear anywhere. Do I now have to sort massive tables by each column one at