My PC recognizes one of my Nanos, but not the other

I have two Nanos. My computer and iTunes recognizes one, but not the other.
I have gone through all the trouble shooting steps on the second one, but it still doesn't register on my computer even though it shows the charging symbol.
I am stumped. Can anyone help>

Download and run this utility. It should indicate what is wrong.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Similar Messages

BPC 7.5 MS Drill Down works on one dimension in rows but not the other

Good day,
Working in BPC 7.5 MS. I have a piped report with 3 dimensions in rows. Members in the first dimension are hard-coded in the expand range. The second dimension is a combination of SELF and DEP members. The third is set to SELF. In our original AppSet, I can double-click drill down on both the second and third dimensions without issue.
I've re-created this report in a new AppSet (same BPC version). All settings are essentially identical (I've double and triple checked). The drill down works on the second dimension, but not the third. I've run out of places to look to find the problem. Any thoughts?
Thanks in advance.
Kim

It took a while but I finally found some quiet time to re-visit this issue. Thank you for the suggestions above. Ultimately I verified that the hierarchy, member selection and tables were all ok.
My next step was to create a new EVDRE with the same members and slowly factor in the piping, membersets, etc. Drill down worked appropriately. So that told me something else was at work.
Turns out the problem was with one of the 'display' columns to the right of the row key range. These columns use formulas to display a triangle if the member isn't calc, thus giving the end user a visual clue that you can drill down on the member. Long story short, BPC just didn't like that formula. A minor change (along with some conditional formatting to replace the piece of formula that was removed) eliminated the problem. Drill down is now working.

Why are my imessages showing up as my email adress to one of my contacts but not the others?

When I use imessage there is one contact in my phone that recieves my messages from my email address... everyone else recieves them from my number exept him. I want to be able to use my imessage without it going as my email to him.

The problem is you are both using the same Apple ID.
You should each have your own.
Check the settings here:
Settings > Messages > Send & Recieve > remove the number that doesn't belong
This will fix the message problem but using the same Apple ID will also merge all iCloud items enabled on the device here:
Settings > iCloud
Such as:
Contacts, calendars , reminders, pjjotos, bookmarks, etc...
It can get quit messy. It is always best to use your own Apple iD if for nothing else but iCloud.

ITunes freezes with one iPod Touch (4g) but not the other.

I have two iPod Touch (4th gen) devices. One syncs fine when connected, but the other freezes iTunes when plugged in. The iPod works fine, and I've never had any trouble before. I also have an iPad 2 that seems to be syncing fine as well. I know my cable is ok, I've tried a few. What's going on?

- Inspect the dock connector for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
Make an iCloud backup (see below). then go to Settings>General>Reet>Erase all content and settings.
- Restore from iCloud backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

HP Officejet Pro 8500- prints wirelessly from one computer in network but not the other

I can print wirelessly from my laptop, but not my desktop. The printer shows on the list, checked as the default, and READY, but document does not seem to find its way there. It never shows up in the print queue.

Download and run this utility. It should indicate what is wrong.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

How do I turn off reminders in one MS Outlook Calendar, but not the other?

I have my calendar and I also have a calendar (lets call it Shared Calendar) in which I copied all of my team's calendars into. I want to keep the Reminder alert on my calendar and turn off the Reminder alerts on the Shared Calendar. How can I do
this?

Hi,
Yes , like Rajitha said , the reminder comes from organizer. Unless the organizer uncheck Reminder in OWA or Outlook (File—Calendar—uncheck Default Reminder/change the reminder value to None
directly when create an meeting) when we arrange the meeting.
But if we do like this, all the user who be invited will lost the reminder.
We can dismiss the reminder, or single click an meeting in Calendar and then change the reminder value to “None” for single meeting
as workaround.
Wendy Liu
TechNet Community Support

I upgraded from elements 10 to 12 it transfered one of my catalogs but not the other

How do i get a second catalog transfered from elements 10 to my elements 12 the first one came down with the download

CD1995 never fear help is here! You may need to cancel and re-add Family Base to get this fixed. Once you do so the following video should be very helpful in getting your Family Base set up correctly right from the start http://vz.to/1zq1bYP . Give this a try and keep us posted!
BryanS_VZW
Follow us at Twitter @vzwsupport

How can I get ALL of my Google Calendars to show on the iCal on my iPhone? I see all of my Google Calendars on the iCal on my Mac, but I do not see them in the iCal on my iPhone. I only see one Google Cal, but not the others.

How can I get ALL of my Google Calendars to show on the iCal on my iPhone?
I see all of my Google Calendars on the iCal on my Mac, but I do not see them in the iCal on my iPhone. I only see one Google Cal, but not the others.

https://www.google.com/calendar/iphoneselect

HT2731 I have 2 apple iPods on the same account, And they have the Same songs on them. How can I get a new account for one of them but not the other? Can I wipe the memory of 1? How would I do that?

I have 2 iPods one I don't use anymore. I would like to make a new account for one but not the other. Is that possible? If I wipe the memory in one will the other wipe out too? How can I do all of this?

You don't have to do anything with the first iPod that you don't use anymore. If you are planning on keeping it, put in a drawer in your house and forget about it.
You don't need a second account to use with the new iPod. I use one Appl e ID and iTunes library for two iPods, and two iPad. I have different content on all four devices. You can select exactly what you want to sync to each device and it can be different content on all devices.

"No connectivity with the server" error for one document but not the other, in the same document library

We have a number of users all of a sudden getting "No connectivity with the server. The file 'xxx' can't be opened because the server couldn't be contacted." errors trying to open MS Office docs (Word, Excel, etc.) in SharePoint with IE,
just by clicking the link and selecting the "Read Only" option. If they select the "Check Out and Edit" option, they can open the document no problem. One of my customers gets the error on one document but not the other, in
the same document library! The older document (a weekly report) was copied and renamed as per standard procedure. She can read the older document, but not the new one.
It is definitely a profile issue, as other people have logged onto the machines of the users with problems and do not get the error. We have also renamed people's c:\user profile folders and the corresponding Profilelist registry entry and the newly
created profile does not experience the error for these people. Renaming the profile back restores all their personal settings but the error reappears. When we copied the old profile's folder structure into the new profile, many of the user settings
were restored (but not all, like Dreamweaver settings) but the error did not appear. We think that the system folders files (like AppData) weren't totally copied over so we're going to run another test using xcopy. We are rebooting between
logons to make sure all files are unlocked.
The laptops and computers are mainly 32bit, Win7 Enterprise running IE9 and Office 2010 Professional Plus, but there's a few 64bit machines as well. The SharePoint farm has 1 WFE, 1 App Server running search and CA, and a shared database server running SQL
2005 SP4. SharePoint is 64bit MOSS 2007 with the latest CU.
We've checked the logs on the client as well as on the server and there aren't any helpful entries. We've also run Process Monitor, also with no helpful entries. We're planning to run something like Fiddler next.
It's not everyone, because there are many people are accessing the SharePoint system and the same files. It is also not a permission thing, as we've tested by giving the users elevated permissions with no changes. One person experiencing
the errors is a Site Collection Admin. That same person ran a test where I coped a simple Excel file into a Document Library which contained a problem file. They were able to open it Read Only no problems that day, but the next day, the same
file gave them an error. In their case, they usually get a "xxx is not checked out" error and only occasionally get the "No connectivity with the server" error.
We've tried lots of things including:
Deleting IE cache
Deleting SharePoint Drafts and webcache folder contents
Running IE without add-ons
Upgrading and Downgrading IE
Uninstalling and re-installing IE
Reinstalling our SSL certs
Repairing Office
Removing and then adding back in the Microsoft Office "Microsoft SharePoint Foundation Support" Office Tool
Deleting all HKLM and HKLU Office registry settings
Toggling IE Compatibility Settings
Toggling the IE Automatic Logon option
Toggling the location of checked out files
Adding the site in the trusted sites list
Adding the site to the WebClient\Parameters registry locations
Making sure the WebClient service is started
Rebooting the machine (lol :)
This is becoming a serious issue, not just because of the inconvenience for the users having to check out every document they want to read, but we have some files with macros that open up other documents to run which are now failing. There aren't
"check out" workarounds for some of those macros.
We're planning to open a ticket with Microsoft, but I'm throwing it out here first in case someone has run into this before, or may have some suggestions on what to try next. Thanks!
-Richard.
PS I think this needs to be in the "General" forum instead?

It took three days of dedicated troubleshooting, but I have found the cause of the errors, and a couple of fixes. It helped tremendously that my own machine was throwing the error. I have scheduled a couple of users to work with me to test the
various fixes, to see which one works best, so the story isn't over yet.
I had backed up my c:\users profile folder and HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList registry key so I could restore my profile after I was done. I made a copy of the profile folder and was using that for awhile,
but then made another copy where I had deleted a lot of content out of it so that the copies would go faster. Since a newly created profile did not have errors, I was trying to copy back as much of the profile as possible to make it easier for our users
to get back to work. Instead of blowing away their profile and starting from scratch (which we know worked) I wanted to narrow down what was causing the error and just skip that from the restore. The concept was to keep as much as the users profile
in tact (application settings, etc.) not just restoring their desktop and My Documents folders.
When we first tested a few weeks ago, simply copying the folder contents didn't reproduce the error. I then tried xcopy, but got the "can't read file" error. Then I tried robocopy, and ran into the "junction" problem.
I went back to xcopy, and found that placing the excludes.txt file in the windows/system32 folder eliminated the error.
So the process went as follows:
Reboot and log into the machine as another user
Delete the profile and associated registry key
Reboot and log into the machine as the affected user, creating a new profile, and there is no error
Reboot and log in as the other user
xcopy the contents of the skinned-down backed-up profile to the newly created profile
Reboot and log in as the affected user, and the error occurs
Repeat the above, but add items in the excludes.txt file to see what, when eliminated, causes the error not to appear in the last step
I eventually found that skipping the c:\users\<profile folder>\appdata\local\Microsoft\office\14.0 folder allowed the entire profile to be copied over without the error occurring. That was strange, because we've cleaned out the cache folders
before which didn't fix the issue.
So I went about it the opposite way, and tried to delete the 14.0 folder from the restored profile, and after reboot, the error still occurred.
What eventually worked was deleting the 14.0 folder and copying over a 14.0 folder from a newly created profile!
One way to do this was to:
Reboot and log in as another user
Rename the c:\users profile folder
Rename the appropriate [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList] registry key
Reboot and log in as the affected user, confirm that there is no error
Reboot and log in as the other user
Copy the C:\Users\<profile folder>\AppData\Local\microsoft\Office\14.0 folder to the other user's desktop
Delete new profile folder, and rename the backup to be the production folder
Delete the C:\Users\<profile folder>\AppData\Local\microsoft\Office\14.0 folder and then paste the 14.0 copy from the desktop
Reboot and log in as the affected user, confirm that there is no error
We've tried this on a couple machines and it works. I had to run Windows Explorer as Administrator to access the other profile's folders.
We've also successfully copied a 14.0 folder created by one profile on one affected computer over another profile's folder on another computer, eliminating the error, so we're trying that first, as that is fewer steps.
We may attempt to script this, but the self-help instructions are only 5 lines long:
Reboot and log into the affected computer with another account
Go to <link to location of 14.0 folder on network> and copy the 14.0 folder
Run Windows Explorer as Administrator
Go to c:\users\<profile folder>\appdata\local\microsoft\office and delete the 14.0 folder, and paste the copied 14.0 folder (trying to overwrite it makes Win7 want to merge the folders)
Reboot and log into your normal account, and confirm the error is gone
I'll come back and report after we go into the field with this fix, but after the few tests, I am cautiously optimistic that this is it.

Why is home sharing showing up on one computer but not the other?

My homesharing is showing up on one computer but not the other! They are both under the same account and both iTunes are up to date. Unfortunatally, of course its showing up on the computer that I dont need it on. Please help me! Thanks!

It could be a firewall issue. Try disabling the firewall and see if that helps.

"printer is offline" appears on one computer but not the other (both windows 7)

printer is offline" appears on one computer but not the other (both windows 7)

This is pretty common to see when your firewall kicks in and blocks certain communication paths the printer takes.
Here's a list of ports and programs that when allowed through the firewall, will restore communiction.
Ports to open:
UDP ports: 427, 161, 139
TCP ports: 9200, 9220, 9290, 9500
Programs to allow:
hpiscnapp.exe
hpoews01.exe
hpofxm08.exe
hposfx08.exe
hposid01.exe
hpqkygrp.exe
hpqste08.exe
hpqtra08.exe
hpznui01.exe
hpzwiz01.exe
SLP_Service (also known as UDP 427)
Have your security software provider walk you through allowing these items through your firewall.
If this does not fix your issue, it is most likely an issue with the driver configuration. Your router may have assisgned the printer a new IP address and this can be changed in the properties of the existing driver.

Encrypted message on one Mac, but not the other, from same server

I run Mail.app on two Macs, both getting mail off the same Exchange server. Multiple times in the last few weeks, a message will download to one Mac and be fine, and then the other Mac will retrieve the message, and it will suddenly be encrypted. Before a bunch of garbled text, something like the following always appears:
--000_25539419161D7744ABC322B480ED5DA507650F7Acmhprdexc04netj
Content-Type: text/plain; charset="utf-8"
Content-Transfer-Encoding: base64
If you go to Webmail on the server, the message reads fine. And it is readable on the other Mac. I tried going to View/Message and choosing "next best alternative" but those options are grayed out. Could there be anything else set locally that is making the email unreadable on one machine but not the other? The unreadable version is always on this Mac (a Mac Mini) and not the other one (a MacBook), even though both are running the same OS version and Mail.app version.

Navigate to your Applications folder.
Right Click on iTunes and select Show Package Contents.
Navigate to Contents/MacOS/
Double-click on iTunes Helper(to get it running). This allows iTunes to start when you plug in your iPhone.
Open System Preferences and go to Users & Groups.
Select the Login Items tab to view the list.
Drag iTunes Helper from the Finder into the Login Items to get it to run at login.
Delete it from Login Items on the Mac you don't want it to start iTunes on.

Airdrop works one way but not the other?

There are two Macbook Airs in my house, both new models (one 13" the other 11"). Airdrop appears to work from the 13" to the 11" but not the other way around. The error message in the console is:
29/07/11 11:09:49.684 PM Finder: WormholeClient::didFail(kCFErrorDomainCFNetwork, -1200, "An SSL error has occurred and a secure connection to the server cannot be made.")
I've tried logging in to another (new, clean) user profile to see if there was some kind of conflict going on, but that didn't make a difference.

It's the firewall settings. It seems like a bug, because in the firewall I had Finder set to allow all incoming connections.
Do the following:
- System Preferences, Security, Firewall, Advanced settings
- Remove the entry for Finder by selecting it and press the minus button
- Check allow signed software
- Uncheck block all
It's working for me now.

My ipad screen won't turn one way when I turn/bump my ipad (will do one side but not the other)

My ipad screen won’t turn one way when I turn/bump my ipad (will do one side but not the other)

Yes there is a rotation lock setting.
First try the switch above the volume rocker. If that doesnt work then double click the home button. It should display a multitasking bar at the bottom of the screen. Slide that to the right and it should display a few settings including screen lock. Make sure that it is unchecked.

My PC recognizes one of my Nanos, but not the other

Similar Messages

Maybe you are looking for