I upgraded from elements 10 to 12 it transfered one of my catalogs but not the other

How do i get a second  catalog transfered from elements 10 to my elements 12 the first one came down with the download

CD1995 never fear help is here! You may need to cancel and re-add Family Base to get this fixed. Once you do so the following video should be very helpful in getting your Family Base set up correctly right from the start http://vz.to/1zq1bYP . Give this a try and keep us posted!
BryanS_VZW
Follow us at Twitter @vzwsupport

Similar Messages

  • HP Officejet Pro 8500- prints wirelessly from one computer in network but not the other

    I can print wirelessly from my laptop, but not my desktop. The printer shows on the list, checked as the default, and READY, but document does not seem to find its way there. It never shows up in the print queue.

    Download and run this utility.  It should indicate what is wrong.  
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • FaceTime: I have a iPad, iPhone, iMac all on the same apple Id/account. Without changing id/email address can I use FaceTime between any 2 of my devices? It works from iPad to iPhone but not the other way??? I would like talk/see my kids if am away

    FaceTime: I have a iPad, iPhone, iMac all on the same apple Id/account. Without changing id/email address can I use FaceTime between any 2 of my devices? It works from iPad to iPhone but not the other way??? I would like talk/see my kids if am away.
    Hope you can help.
    I have added a new email address but kept my Id, but I get busy when trying from iPhone to iPad as they are clashing. Like find my iPhone app hence trying to keep them all on one account

    IOS: using facetime http://support.apple.com/kb/ht4319
    using an ipad will use the email address since you can't make a phone call.  see the link.
    Your basically calling/emailing yourself that's why your getting a busy signal.

  • I able to copy and paste files from external hard drive to mac, but not the other way around. Please suggest. Thanks

    I m able to copy and paste selected files from external hard drive to my mac but not the other way around. Im not able to copy files from Mac to external hard drive.
    The same is working fine with USB flash memory.
    Please help.

    Vijay Raymond Daniel wrote:
    The only thing is we need to buy this software. if there is a free solution to inter change files between NTFS and HFS it would be better,
    Don't use NTFS, remove your data off it first and change the format to something the Mac and PC can read, but doens't cost money or require software.
    Drives, partitions, formatting w/Mac's + PC's

  • Trying to connect my iMac to on 10.8.2 with PowerBook Intel on 10.5.8; sharing works from PowerBook to iMac but not the other way around. Why?

    Trying to connect my iMac to on 10.8.2 with PowerBook Intel on 10.5.8; sharing works from PowerBook to iMac but not the other way around. Why?

    Thanks for the interest. Preferences are similar on both machines: screen sharing, file sharing, printer sharing & scanner sharing all ticked and radio button for Screen Sharing is ON.
    My confusion is that I can get a network connection to the iMac by selecting "go to server" on the PowerMac running 10.5.8 but am unable to make the iMac connect to the PowerMac using similar selections. When ethernet cable is plugged in the PowerMac shows up on the finder bar on the iMac, but it does not allow either screen sharing or connection to occur - a dialog box tells me to check System Prefs and Network connection.
    I'm hoping to export a large file of photos from iPhoto on my iMac to my wife's PowerMac and hoped to achieve this with an ethernet network connection.

  • HT4539 Why I can download from iCloud on 1 iPod but not the other. It says downloaded but doesn't show up in music...

    I can download from iCloud to one iPod but not the other.  It says downloaded but doesn't show up in music...

    I'm not sure what you mean by the "music library" - are you looking in the Music app?  Or the iTunes app (which is not the one to be looking in)?

  • Why does the clone stamp work when I go from a darker colour to a lighter colour but not the other way around. How can I lighten up a dark area? Lasso tool takes from the wrong area too.

    Why does the clone stamp work when I go from a darker color to a lighter color but not the other way around? How can I lighted a dark area? The Lasso tool takes from the wrong area.

    c.pfaffenbichler wrote:
    Why do you use the Blend Modes Lighter and Darker at all in this case and not simply Normal?
    And what kept you from posting a screenshot?
    I borrowed the image below for an HDR workshop I ran at the 2010 PSNZ National Convention, to demonstrate a method of removing halos.  You'll remember that halos were a serious problem with early HDR, and while the halos in this image were caused by over sharpening, they are perfect for demonstrating this technique.
    It relies on the fact that halos so often tend to put a lighter tone between the two areas where sharpening is being applied. Whether that is the sky abutting a dark line of hills, or the rock and little tower as in this image.  I've uploaded it at the size it was supplied to me at (about 2700 pixels wide).  So
    Click to open the full image, right click and copy, and paste into Photoshop.
    Select the clone tool, and set its blend mode to Darken.
    Try to sample on a line horizontal to where you want to clone, to give the best tonal match, and start cloning.
    Because the sky is darker than the halo, it overwrites it. But the rock is darker than the sky, so it has no affect.
    It works even better if you clone on a new layer also set to Darken.  No masking, just Photoshop blend mode magic.
    You can also fix the little tower. Use a great big brush — just remember to sample horizontal to match the horizon.
    Back then I was using the same trick with CAs after forgetting to fix them in ACR, and having done too much work to start again after spotting the problem.

  • How do you delete albums from an I-phone 4,only able to delete from camera roll,but not the other albums

    How do you delete albums from an I-phone 4,only able to delete from camera roll,but not the other albums

    How did the photos get onto the phone ? Only photos taken with the phone or saved from emails/websites etc can be deleted directly on the device. Photos that were synced from your computer are deleted by moving/removing/de-selecting them from where they were synced from on your computer and then re-syncing.

  • Encrypted message on one Mac, but not the other, from same server

    I run Mail.app on two Macs, both getting mail off the same Exchange server. Multiple times in the last few weeks, a message will download to one Mac and be fine, and then the other Mac will retrieve the message, and it will suddenly be encrypted. Before a bunch of garbled text, something like the following always appears:
    --000_25539419161D7744ABC322B480ED5DA507650F7Acmhprdexc04netj
    Content-Type: text/plain; charset="utf-8"
    Content-Transfer-Encoding: base64
    If you go to Webmail on the server, the message reads fine. And it is readable on the other Mac. I tried going to View/Message and choosing "next best alternative" but those options are grayed out. Could there be anything else set locally that is making the email unreadable on one machine but not the other? The unreadable version is always on this Mac (a Mac Mini) and not the other one (a MacBook), even though both are running the same OS version and Mail.app version.

    Navigate to your Applications folder.
    Right Click on iTunes and select Show Package Contents.
    Navigate to Contents/MacOS/
    Double-click on iTunes Helper(to get it running). This allows iTunes to start when you plug in your iPhone.
    Open System Preferences and go to Users & Groups.
    Select the Login Items tab to view the list.
    Drag iTunes Helper from the Finder into the Login Items to get it to run at login.
    Delete it from Login Items on the Mac you don't want it to start iTunes on.

  • TS2972 home sharing will work from computer to apple tv but not the other way?

    home sharing will work from computer to apple tv but not the other way?

    Home sharing is one thing, physically copying is another thing.

  • HT201317 How do I get photos from my I phone onto my I pad? Photo stream seems to be transferring from my I pad to phone but not the other way round.

    How do I get photos from my I phone onto my I pad? Photo stream works I pad to I phone but not the other way round?

    Photostream only syncs photos over Wi-Fi, make sure you are connected to Wi-Fi to begin with.
    Photostream only syncs when the camera app is closed, ensure it is closed.
    Photostream only syncs when the battery is above 20%, try recharging the device
    Try disabling photo stream on your device (settings > iCloud), restarting your device and then re-enabling photo stream.
    If this doesn't help you may need to reset photo stream. You can do this at icloud.com by clicking on your name in the top right corner and then the advanced settings in the pop-up dialogue box that appears.
    Note: disabling photostream and re-enabling it will result in any photos that are currently in the photostream album on your device, that are older than 30 days old, not being added back.

  • Syncing of calendar works only from icloud to iphone but not the other way round

    My iphone is suddenly not syncing with icloud anymore. I sync only the Calendar (ical). From the icloud calendar to the iPhone calendar syncing is working but not the other way round. I was at a genius bar but they could not solve the problem. Apple phone support suggested nothing I haven't tried like reboot etc. Any ideas how to solve the problem?

    Go to Settings>Mails, Contacts, Calendars, scroll down to Calendars section and check the Default Calendar. Must be the iCloud calendar. If you don't see this option it means that you have only the iCloud calendar in your iPhone. In that case try to turn off the Calendar from iCloud settings and turn it back on after few seconds.

  • CR2 files open from one camera, but not the other in CS2

    Running Mac with CS2. My camera raw files shot with my lovely Canon 5D open and can be viewed in bridge and in photoshop, but NOT the camera raw from my brand new Canon powershot G9. They are both producing CR2 files. I can see the images in the bridge browser window, but when I double click to open I get a dialogue box that says, "Could not complete your request because Photoshop does not recognize this type of file." I have the 3.7 plug in installed. Please, some god or goddess of photoshop out there, show me the error of my ways!

    Walt,
    I will answer your questions to the best of my ability. But hopefully others who are better at this than I am will offer their help as well. So, here goes.
    1. Everyone has their preferred method of using Bridge. In the Photoshop preferences I have not checked the box to have bridge start automatically. Although I use Bridge most of the time, there are occasions when I don't want to use it. So I prefer to start my Photoshop session by starting Bridge first, and then double-click on an image in Bridge to have it opened in Photoshop. In the Bridge preferences, I have checked the "Double-Click Edits Camera Raw Settings in Bridge", and I like working that way.
    2. I have seen several people comment about having this problem. And occasionally it will develop after you have been using Bridge/Photoshop for a while. The only thing I can suggest is for you to hold down the Ctrl key while you start Bridge. A dialogue will appear that will allow you to reset your preferences. There are three options and you should choose all three. I know, you haven't had it installed very long, but this "could" be the problem. One guy I talked with said that he had to do it several times before it fixed the problem.
    3. You indicated that you downloaded Camera Raw 4(5). What does that mean? Did you download version 4.5, which is the latest version? And, did you follow the installation instructions that were on the download page? The new plug-in must be put in the exact directory specified, replacing the old version that is already there. The old version cannot be put in a sub folder. You might as well get rid of it. You don't need it anymore. And, again, it has to go into the specific folder designated in the instructions. After you have done that, in Photoshop goto Help/About Plug-ins and click on Camera Raw. It should only be listed once, and when you click on it you should get a dialogue that will tell you what version you have installed.
    4. After I installed CS3, when I inserted a card into my card reader I was presented with the normal Windows options. One of the options I was given was to download using Bridge. I chose that option and indicated to always use that option. I haven't had any problems with it since. But if that option isn't there, you can open Bridge and click on the File menu. There is an option to download images from your camera. It has worked well for me.

  • Build Array keeps name of the last element but not the others. Workaround?

    Hi there,
    Sorry if this has been posted before, I did the search first but did not find anything.
    Problem is that I have two setups that are identical and need to be controlled from a single vi. Since they are the same they are configured with the same sets of parameters so I decided to create a cluster of these and then build an array of the clusters. This way I need to only use one wire and if I need a given parameter I can easily get it from there (or so I thought) and also since I need to see if anything changes I can compare one wire instead of each one of the parameters.
    The gui has the list of parameters then in the block diagram I bundle them appropiately, using "Bundle by Name" and then each bundle into an array using "Build Array". Problem arises when I index the array for the first setup and the use that to unbundle the parameters I need, using "Unbundle by Name" (though if I use "Unbundle" the same happens)and lo and behol, the ouput names are from the second setup, not the first.
    Here is the curious thing though, even though the names are all wrong the values are correct. I could live with this but it is annoying plus it will make another user very hard to understand the diagram plus this is just a proof of principle to test with two, eventually there will be eight or even more and that is going to get really confusing.
    Is there a way around this? Even if it is to change the names after unbundled.
    Check the attached vi to see what I mean.
    Solved!
    Go to Solution.
    Attachments:
    Test Build Array Names.vi ‏11 KB

    I think you are forgetting an important point about arrays.  The only thing that can be different between each element of an array is its value.  The array elements must all share the same properties.  So that would include the names of the individual elements that make up the cluster that is an array element.
    It appears that the last cluster that gets built into the array is the one that defines the names of the elements that are within the cluster element.  You either need to give all elements of the array the same names within the cluster.  Or use a cluster of clusters instead of an array of cluster to build your data structure.

  • Can retrieve value from one table, but not the other (exception thrown)

    Hi
    I hope some friendly soul can help me out here. I have a local Access database file. I am able to get a value from all tables except for one, which throws this error: "System.NullReferenceException:
    Object reference has not been specified to an object".
    The rather simple lines of code when working is this:
    Dim email As Object
    value = MyDataSet.Tables("Table")(0)(1).ToString
    Msgbox(email)
    However, when simply changing from "Table" to "AnotherTable", the exception is thrown. I
    have seriously no idea why. I've made sure the datatypes are the same and that the values are not NULL.
    What gives?

    Hello,
    Going with your last reply, you should be accessing data via the strong typed classes that get generated.
    Example using Microsoft Northwind database accessing the customers table in a MS-Access database. Note the check for Rows, we could even go farther if we are questioning issue with the data via try-catch statements writing errors to the IDE Output window.
    I would highly recommend never referencing rows without first checking if there are rows and secondly never reference columns by ordinal index, always use the column name. One example with ordinal positioning, suppose someone did SomeDataTable.Columns("SomeColName").SetOrdinal(3)
    and you expect the ordinal position to be 1 ? things will crash-n-burn. Food for thought :-)
    Public Class Form1
    Private Sub Form1_Load(sender As Object, e As EventArgs) Handles MyBase.Load
    Me.CustomersTableAdapter.Fill(Me.MainDataSet.Customers)
    End Sub
    Private Sub Button1_Click(sender As Object, e As EventArgs) Handles Button1.Click
    If MainDataSet.Customers.Rows IsNot Nothing Then
    Dim FirstCompanyName As String = MainDataSet.Customers.FirstOrDefault.CompanyName
    MessageBox.Show(FirstCompanyName)
    Else
    MessageBox.Show("No rows in customer table")
    End If
    End Sub
    End Class
    In this case we get the first record from below in Button1 Click
    Please remember to mark the replies as answers if they help and unmark them if they provide no help, this will help others who are looking for solutions to the same or similar problem.

Maybe you are looking for

  • Timer before return to the input page

    Summary: I have a working page. User inputs their details. Clicks on Submit. Writes to the database table. Goes off to this acknowledgement page. I want to pause the page (the acknowledgement page) for awhile before returning to the form again. Quest

  • How to set packages and classpath

    Hi, I want to know about packages and classpath. I have these questions 1, If I put a class in a package(work.util) is it necessary to put the java file in the same directory/directory hierarchy as mentioned in the package declaration. I have to comp

  • Partail sync time capsule and mac

    Guys, i have a question.... is it possible to sync partaily documents or files from my mac to time capsule or i have to back up entire hard disk?

  • Import: date is import date not shot date

    When I import photo from my camera to Photoshop Elements 10, in the import windows I have file name and import date, not shot date. I think shot date will be more usefull to select the photo, as I already know the import date (it is now).

  • Why is there is no colour difference in FF4 between an active and an non-active tab?

    Tabbed browsing is one of the best features of Firefox. In previous versions the active or selected tab is a lighter colour than the non-active tabs, making it easier to navigate between tabs. In Firefox 4 (Windows) all the tabs are the same colour.