My phone does not open anymore, after the battery has been empty.
My phone?s battery turned off, it was empty. I plugged it and it never came back to life It's been 72 hours though... What could I do??
You could try another charger but it's possible that won't help. I'd make an appointment at your local apple store and have them check it out.
Similar Messages
-
Pages does not open anymore after the latest update
I did all suggested problem solving steps, but after the last update Pages does not open anymore.
It opens a window and immediately crashes again.
I paid for it, and I used it for my business - and I'm so angry, that there is no support for apps in fact...Welcome to the Apple Community.
Turn off iCloud for Pages on your mobile device at Settings > Pages > Use iCloud > Off.
Open Pages on your computer and move any documents in iCloud to your desktop for safe keeping.
Navigate to system preferences > iCloud > Manage and check that Pages documents are not taking any space in the cloud, delete them if they are.
Enable iCloud syncing for Pages on your mobile device and launch the App.
If Pages now opens properly, start to add back documents from your desktop one at a time (or in small groups if you have many). -
AIR app does not open anymore after minimizing on windows
Hi guys,
I need some help in figuring out a strange issue I am facing.
I have an AIR app whih is minimizable. When I run it on windows XP and minimize it, it gets minimized. But
clicking on the task bar does not open the app anymore. The task manager shows that the CPU usage for the app has gone upto 50%
and it consistently stays over there with out recovering from it.
Right clicking on it and then trying it to close shows me the windows dialog: "the program is not responding".
MInimizing and re-opening works fine on MAC.
Anyone has ideas on what might be happening? Suggestions or pointers on how to debug this?
thanks,
SunilIt turns out that in one of my UI components, the top level item was a VBox which was using a list of HBox components and the height of each HBox component was set to VBox height /5.
I modified the height to be set to "100%" for each HBox.
and everything worked fine.
I really do not know how it can cause the application to hang earlier.
thanks,
Sunil
Sunil Patro
video chat: www.tokbox.com/sunil -
IPhone 3gs Battery Heating, iPhone does not start even after the battery replaced
Hello
Last night my phone was plugged into the car charger and suddenly it went blank and turnned off itself. I Tried DFU'in it but nothing worked. I charged it but all it does is heats up. Today I replaced the battery and it sill wouldnt work. I cant turn it on at all!
Can some one please help me.
URGENT!!
ThanksExtremely doubtful. Without being able to get the phone up and running, it's impossible to say for sure, but I'm guessing any data that was on the phone is long gone.
As for what could be the issue... at this stage, I'll have to go with an all encompassing "it's broke". You're probably going to either have to find a professional repair shop or just buy a new phone. Apple won't touch it at this stage since you opened it yourself. -
I've uninstalled . . . then went all the way back to iWork 08 . . . which opens just fine. Then downloaded/installed the update. It just won't open.
I've uninstalled . . . then went all the way back to iWork 08 . . . which opens just fine. Then downloaded/installed the update. It just won't open.
-
Updation not happening once after the material has been extened
Dear Guru's,
I want to extend materials from one plant to another plant. I am using BAPI_MATERIAL_SAVEDATA.
every thing is doing good but the material was updated in the destination plant. I have used BAPI_TRANSACTION_COMMIT' also. ans not all getting any any error message. In the return table i am getting success message. please help me. I am sending my code also. please gothrough and give suggestion . it very urgent.
points will be given for solving the problem.
Thanks in advance.
REPORT ZMMR_MATERIAL_EXTENSION.
TABLES: T001L, "Storage Locations
MARA, "General Material Data
MAKT, "Material Descriptions
MBEW, "Material Valuation
MARC, "Plant Data for Material
MARD. " Storage location
DATA : INDEX LIKE SY-TABIX.
DATA: BAPI_HEAD LIKE BAPIMATHEAD,
BAPI_MAKT LIKE BAPI_MAKT, "Material Description
BAPI_MARA1 LIKE BAPI_MARA, "Client Data
BAPI_MARAX LIKE BAPI_MARAX,
BAPI_MARC1 LIKE BAPI_MARC, "Plant View
BAPI_MARCX LIKE BAPI_MARCX,
BAPI_MBEW1 LIKE BAPI_MBEW, "Accounting View
BAPI_MBEWX LIKE BAPI_MBEWX,
BAPI_MARD1 LIKE BAPI_MARD, " STORAGE LOCATION
BAPI_MARDX LIKE BAPI_MARDX,
BAPI_RETURN LIKE BAPIRET2.
DATA: BEGIN OF INT_MAKT OCCURS 100.
INCLUDE STRUCTURE BAPI_MAKT.
DATA: END OF INT_MAKT.
for material updation*******
*data:mara_data type bapi_mara,
*mara_datax type bapi_marax,
*wa_bapi_te_mara type bapi_te_mara,
*wa_bapi_te_marax type bapi_te_marax,
*wa_valuepart(960),
*wa_valuepartx(960),
*t_extin type table of bapiparex,
*t_extinx type table of bapiparexx,
*d_extin type bapiparex,
*d_extinx type bapiparexx,
*ret type bapiret2.
DATA: BEGIN OF INT_MAT OCCURS 100,
WERKS(4), "Plant
MTART(4), "Material type
MATNR(18), "Material number
MATKL(9) , "Material group
MBRSH(1), "Industry sector
MEINS(3), "Base unit of measure
GEWEI(3), "Weight Unit
SPART(2), "Division
TRAGR(4), "Transportation group
EKWSL(4), "Purchasing Value Key
marc
EKGRP(3), "Purchasing group
MTVFP(2), "Checking Group for Availability Check
LADGR(4), "Loading group
PRCTR(10), "Profit Center
WEBAZ like BAPI_MARC-GR_PR_TIME, "Goods receipt processing time in days.
PERKZ(1), "Period indicator
AWSLS(6), "Variance Key
DISGR(4), "MRP Group
DISMM(2), "MRP Type
DISPO(3), "MRP controller
DISLS(2), "Lot size (materials planning)
BESKZ(1), "Procurement Type
DZEIT like BAPI_MARC-INHSEPRODT, "In-house production time.
PLIFZ like BAPI_MARC-PLND_DELRY, "Planned delivery time in days.
makt
SPRAS(2), "Language key
MAKTX(40), "Material description
***mbew
BKLAS(4), "Valuation Class.
VPRSV(1), "Price control indicator
VERPR like BAPI_MBEW-MOVING_PR, "Moving Average Price
STPRS like BAPI_MBEW-STD_PRICE, "Standard price
PEINH like BAPI_MBEW-PRICE_UNIT, "Price unit
****mard
LGORT(4), "Storage location
END OF INT_MAT.
SELECT-OPTIONS:
PLANT FOR MARC-WERKS OBLIGATORY MEMORY ID PLT,
MATERIAL FOR MARA-MATNR MEMORY ID MAT,
MATLTYPE FOR MARA-MTART MEMORY ID MTY,
DIVISION FOR MARA-SPART MEMORY ID DIV.
PARAMETERS: F_FILE LIKE RLGRAP-FILENAME
DEFAULT 'C:\DATA\ZMATERIAL.XLS' MEMORY ID F_FILE,
GETDATA AS CHECKBOX, "Tick to download materials data to local harddisk
UPDDATA AS CHECKBOX. "Tick to update date to Materials Master
IF GETDATA = 'X'.
PERFORM DOWNLOAD_DATA.
PERFORM DOWNLOAD_FILE.
ENDIF.
IF UPDDATA = 'X'.
PERFORM UPLOAD_FILE.
PERFORM UPDATE_MM.
ENDIF.
*& Form DOWNLOAD_DATA
text
FORM DOWNLOAD_DATA.
*IF MATLTYPE-LOW NE 'SFGD' OR MATLTYPE-LOW NE 'SPRS'.
SELECT * FROM MARC WHERE LVORM EQ ' '
AND WERKS IN PLANT
AND MATNR IN MATERIAL.
CLEAR MARA.
SELECT SINGLE * FROM MARA WHERE MATNR = MARC-MATNR .
CHECK MATLTYPE.
IF MARA-MTART = 'SFGD' or MARA-MTART = '' or MARA-MTART = 'SPRS'.
clear : MARA,INT_MAT.
continue.
ENDIF.
CHECK DIVISION.
CLEAR MBEW.
SELECT SINGLE * FROM MBEW WHERE MATNR = MARC-MATNR
AND BWKEY = MARC-WERKS.
CLEAR MAKT.
SELECT SINGLE * FROM MAKT WHERE SPRAS = 'EN'
AND MATNR = MARC-MATNR.
CLEAR MARD.
SELECT SINGLE * FROM MARD WHERE MATNR = MARC-MATNR
AND WERKS = MARC-WERKS.
WRITE:/ MARC-WERKS, "Plant
MARA-MTART, "Material type
MARA-MATNR, "Material number
MARA-MATKL, "Material group
MARA-MBRSH, "Industry sector
MARA-MEINS, "Base unit of measure
MARA-GEWEI, "Weight Unit
MARA-SPART, "Division
MARA-TRAGR, "Trasaction Group
MARA-EKWSL, "Purchase Value key
MARA-IPRKZ, "Period indi.for. SLED.
MARC-EKGRP, "Purchasing group
MARC-MTVFP, "Availability check
MARC-LADGR, "Loading grp.
MARC-PRCTR, "Profit Center
MARC-WEBAZ, "GR processing time
MARC-PERKZ, "Period Indicator
MARC-AWSLS, "Variance key
MARC-DISGR, "MRP GROUP
MARC-DISMM, "MRP TYPE
MARC-DISPO, "MRP CONTOLLER
MARC-DISLS, "LOT SIZE
MARC-BESKZ, "PROCUREMENT TYPE
MARC-DZEIT, "IN-HOUSE PRD TIME
MARC-PLIFZ, "PLANT DELIVERY TIME
MBEW-BKLAS, "VALUATION CLASS
MBEW-VPRSV, "Price control indicator
MBEW-VERPR, "MOVING PRICE
MBEW-STPRS, "Standard price
MBEW-PEINH, "Price unit
MAKT-SPRAS, "Language key
MAKT-MAKTX, "Material description
MARD-LGORT. "Storage location.
INT_MAT-WERKS = MARC-WERKS. "Plant
INT_MAT-MTART = MARA-MTART. "Material type
INT_MAT-MATNR = MARA-MATNR. "Material number
INT_MAT-MATKL = MARA-MATKL. "Material group
INT_MAT-MBRSH = MARA-MBRSH. "Industry sector
INT_MAT-MEINS = MARA-MEINS. "Base unit of measure
INT_MAT-GEWEI = MARA-GEWEI. "Weight Unit
INT_MAT-SPART = MARA-SPART. "Division
INT_MAT-TRAGR = MARA-TRAGR. "Trasaction Group
INT_MAT-EKWSL = MARA-EKWSL. "Purchase Value key
INT_MAT-IPRKZ = MARA-IPRKZ. "Period indi.for. SLED.
INT_MAT-EKGRP = MARC-EKGRP. "Purchasing group
INT_MAT-MTVFP = MARC-MTVFP. "Availability check
INT_MAT-LADGR = MARC-LADGR. "Loading grp.
INT_MAT-PRCTR = MARC-PRCTR. "Profit Center
INT_MAT-WEBAZ = MARC-WEBAZ. "GR processing time
INT_MAT-PERKZ = MARC-PERKZ. "Period Indicator
INT_MAT-AWSLS = MARC-AWSLS. "Variance key
INT_MAT-DISGR = MARC-DISGR. "MRP GROUP
INT_MAT-DISMM = MARC-DISMM. "MRP TYPE
INT_MAT-DISPO = MARC-DISPO. "MRP CONTOLLER
INT_MAT-DISLS = MARC-DISLS. "LOT SIZE
INT_MAT-BESKZ = MARC-BESKZ. "PROCUREMENT TYPE
INT_MAT-DZEIT = MARC-DZEIT. "IN-HOUSE PRD TIME
INT_MAT-PLIFZ = MARC-PLIFZ. "PLANT DELIVERY TIME
INT_MAT-BKLAS = MBEW-BKLAS. "Valution class
INT_MAT-VPRSV = MBEW-VPRSV. "Price control indicator
INT_MAT-VERPR = MBEW-VERPR. "Moving price
INT_MAT-STPRS = MBEW-STPRS. "Standard price
INT_MAT-PEINH = MBEW-PEINH. "Price unit
INT_MAT-SPRAS = MAKT-SPRAS. "Language key
INT_MAT-MAKTX = MAKT-MAKTX. "Material description
INT_MAT-LGORT = MARD-LGORT. " Storage location
APPEND INT_MAT.
CLEAR INT_MAT.
ENDSELECT.
*ENDIF.
ENDFORM. "DOWNLOAD_DATA
*& Form DOWNLOAD_FILE
text
FORM DOWNLOAD_FILE.
call function 'WS_DOWNLOAD'
EXPORTING
FILENAME = F_FILE
FILETYPE = 'DAT'
FILETYPE = 'WK1'
tables
data_tab = INT_MAT
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_WRITE_ERROR = 2
INVALID_FILESIZE = 3
INVALID_TYPE = 4
NO_BATCH = 5
UNKNOWN_ERROR = 6
INVALID_TABLE_WIDTH = 7
GUI_REFUSE_FILETRANSFER = 8
CUSTOMER_ERROR = 9
OTHERS = 10.
IF SY-SUBRC = 0.
FORMAT COLOR COL_GROUP.
WRITE:/ 'Data Download Successfully to your local harddisk'.
SKIP.
ENDIF.
ENDFORM. "DOWNLOAD_FILE
*& Form UPLOAD_FILE
text
FORM UPLOAD_FILE.
call function 'WS_UPLOAD'
EXPORTING
FILENAME = F_FILE
FILETYPE = 'DAT'
FILETYPE = 'WK1'
tables
data_tab = INT_MAT
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_WRITE_ERROR = 2
INVALID_FILESIZE = 3
INVALID_TYPE = 4
NO_BATCH = 5
UNKNOWN_ERROR = 6
INVALID_TABLE_WIDTH = 7
GUI_REFUSE_FILETRANSFER = 8
CUSTOMER_ERROR = 9
OTHERS = 10.
IF SY-SUBRC = 0.
FORMAT COLOR COL_GROUP.
WRITE:/ 'Data Upload Successfully from your local harddisk'.
SKIP.
ENDIF.
ENDFORM. "UPLOAD_FILE
*& Form UPDATE_MM
text
FORM UPDATE_MM.
LOOP AT INT_MAT.
Header
BAPI_HEAD-MATERIAL = INT_MAT-MATNR.
BAPI_HEAD-IND_SECTOR = INT_MAT-MBRSH.
BAPI_HEAD-MATL_TYPE = INT_MAT-MTART.
BAPI_HEAD-BASIC_VIEW = 'X'.
BAPI_HEAD-PURCHASE_VIEW = 'X'.
BAPI_HEAD-ACCOUNT_VIEW = 'X'.
BAPI_HEAD-MRP_VIEW = 'X'.
BAPI_HEAD-STORAGE_VIEW = 'X'.
BAPI_HEAD-QUALITY_VIEW = 'X'.
BAPI_HEAD-COST_VIEW = 'X'.
wa_bapi_te_mara-material = INT_MAT-MATNR.
wa_bapi_te_marax-material = INT_MAT-MATNR.
Material Description
REFRESH INT_MAKT.
INT_MAKT-LANGU = INT_MAT-SPRAS.
INT_MAKT-MATL_DESC = INT_MAT-MAKTX.
APPEND INT_MAKT.
sorage location.
BAPI_MARD1-PLANT = INT_MAT-WERKS.
BAPI_MARD1-STGE_LOC = INT_MAT-LGORT.
BAPI_MARDX-PLANT = INT_MAT-WERKS.
BAPI_MARDX-STGE_LOC = INT_MAT-LGORT.
Client Data - Basic
BAPI_MARA1-MATL_GROUP = INT_MAT-MATKL.
BAPI_MARA1-BASE_UOM = INT_MAT-MEINS.
BAPI_MARA1-UNIT_OF_WT = INT_MAT-GEWEI.
BAPI_MARA1-DIVISION = INT_MAT-SPART.
BAPI_MARA1-TRANS_GRP = INT_MAT-TRAGR.
BAPI_MARA1-PUR_VALKEY = INT_MAT-EKWSL.
BAPI_MARAX-MATL_GROUP = 'X'.
BAPI_MARAX-BASE_UOM = 'X'.
BAPI_MARAX-UNIT_OF_WT = 'X'.
BAPI_MARAX-DIVISION = 'X'.
BAPI_MARAX-TRANS_GRP = 'X'.
BAPI_MARAX-PUR_VALKEY = 'X'.
Plant - Purchasing
BAPI_MARC1-PLANT = INT_MAT-WERKS . "PLANT-LOW.
BAPI_MARC1-PUR_GROUP = INT_MAT-EKGRP.
BAPI_MARC1-AVAILCHECK = INT_MAT-MTVFP.
BAPI_MARC1-LOADINGGRP = INT_MAT-LADGR.
BAPI_MARC1-PROFIT_CTR = INT_MAT-PRCTR. " profit center and plant are same
BAPI_MARC1-GR_PR_TIME = INT_MAT-WEBAZ.
BAPI_MARC1-PERIOD_IND = INT_MAT-PERKZ.
BAPI_MARC1-VARIANCE_KEY = INT_MAT-AWSLS.
BAPI_MARC1-MRP_GROUP = INT_MAT-DISGR.
BAPI_MARC1-MRP_TYPE = INT_MAT-DISMM.
BAPI_MARC1-MRP_CTRLER = INT_MAT-DISPO.
BAPI_MARC1-LOTSIZEKEY = INT_MAT-DISLS.
BAPI_MARC1-PROC_TYPE = INT_MAT-BESKZ.
BAPI_MARC1-INHSEPRODT = INT_MAT-DZEIT.
BAPI_MARC1-PLND_DELRY = INT_MAT-PLIFZ.
BAPI_MARCX-PLANT = INT_MAT-WERKS . " PLANT-LOW.
BAPI_MARCX-PUR_GROUP = 'X'.
BAPI_MARCX-AVAILCHECK = 'X'.
BAPI_MARCX-LOADINGGRP = 'X'.
BAPI_MARCX-PROFIT_CTR = 'X'.
BAPI_MARCX-GR_PR_TIME = 'X'.
BAPI_MARCX-PERIOD_IND = 'X'.
BAPI_MARCX-VARIANCE_KEY = 'X'.
BAPI_MARCX-MRP_GROUP = 'X'.
BAPI_MARCX-MRP_TYPE = 'X'.
BAPI_MARCX-MRP_CTRLER = 'X'.
BAPI_MARCX-LOTSIZEKEY = 'X'.
BAPI_MARCX-PROC_TYPE = 'X'.
BAPI_MARCX-INHSEPRODT = 'X'.
BAPI_MARCX-PLND_DELRY = 'X'.
Accounting
BAPI_MBEW1-VAL_AREA = INT_MAT-WERKS.
BAPI_MBEW1-VAL_CLASS = INT_MAT-BKLAS.
BAPI_MBEW1-PRICE_CTRL = INT_MAT-VPRSV.
BAPI_MBEW1-MOVING_PR = INT_MAT-VERPR.
BAPI_MBEW1-STD_PRICE = INT_MAT-STPRS.
BAPI_MBEW1-PRICE_UNIT = INT_MAT-PEINH.
BAPI_MBEWX-VAL_AREA = INT_MAT-WERKS.
BAPI_MBEWX-VAL_CLASS = 'X'.
BAPI_MBEWX-PRICE_CTRL = 'X'.
BAPI_MBEWX-MOVING_PR = 'X'.
BAPI_MBEWX-STD_PRICE = 'X'.
BAPI_MBEWX-PRICE_UNIT = 'X'.
************for testing purpose
*wa_valuepart = wa_bapi_te_mara.
*d_extin-structure = 'BAPI_TE_MARA'.
*d_extin-valuepart1 = wa_valuepart(240).
*d_extin-valuepart2 = wa_valuepart+240(240).
*d_extin-valuepart3 = wa_valuepart+480(240).
*d_extin-valuepart4 = wa_valuepart+720(240).
*wa_valuepartx = wa_bapi_te_marax.
*d_extinx-structure = 'BAPI_TE_MARAX'.
*d_extinx-valuepart1 = wa_valuepartx(240).
*d_extinx-valuepart2 = wa_valuepartx+240(240).
*d_extinx-valuepart3 = wa_valuepartx+480(240).
*d_extinx-valuepart4 = wa_valuepartx+720(240).
*append d_extin to t_extin.
*append d_extinx to t_extinx.
remove up to here only.
*WRITE:/ BAPI_HEAD, BAPI_MARC1.
call function 'BAPI_MATERIAL_SAVEDATA'
EXPORTING
HEADDATA = BAPI_HEAD
CLIENTDATA = BAPI_MARA1
CLIENTDATAX = BAPI_MARAX
PLANTDATA = BAPI_MARC1
PLANTDATAX = BAPI_MARCX
STORAGELOCATIONDATA = BAPI_MARD1
STORAGELOCATIONDATAX = BAPI_MARDX
VALUATIONDATA = BAPI_MBEW1
VALUATIONDATAX = BAPI_MBEWX
IMPORTING
RETURN = BAPI_RETURN
TABLES
MATERIALDESCRIPTION = INT_MAKT.
extensionin = t_extin
extensioninx = t_extinx.
IF BAPI_RETURN-TYPE = 'S' .
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
EXPORTING
wait = ''.
ENDIF.
IF BAPI_RETURN-TYPE = 'E'.
WRITE:/ 'Error Message ', BAPI_RETURN-NUMBER,
BAPI_RETURN-MESSAGE.
ENDIF.
ENDLOOP.
ENDFORM. "UPDATE_MM
please give me reply
PrashanthWe have encountered the same problem at our company, and the following thread help us to resolve our problem:
Thanks to KevinCur.
Error while saving a .PDF File to a mapped drive
"It has to do with Protected Mode being turned on. I don't know if it was off by default & now it is on with the update but turning it off changes Adobe Reader's behavior back to what the users expect - a prompt warning you if you want to overwrite the existing file & then selecting Yes to overwrite.
To disable Protected Mode:
Start Adobe Reader
Edit - Preferences - Security (Enhanced)
Uncheck Enable Protected Mode at Startup
Close Preferences & Close Reader"
We unchecked the "Enable Protected Mode at startup" box --> Yes --> OK. Our users are happy now. ^_^ -
I have been working on a VI for a few Months not and it does not open anymore. The last change I did was on a Mixed signal graph
and now when I try to open the VI LabVIEW freezes at the welcome screen. Any ideas on how to recover this VI will save tons of work.
Solved!
Go to Solution.Drewski wrote:
The vi may be in run-on-open mode. You might try creating a new blank vi and adding the vi to the block diagram and try opening it up from there.
Good Luck.
Why would that freeze LabVIEW when being opened? -
The screen of my iphone 4 is blank and the phone does not respond even after pressing the on/off and home button, the only reaction is the vibration felt when I plug in to charge the phone. What should I do?
This is the ipod touch forum
-
HT1688 My iphone 5 does not ring anymore after upgrading to ios 7.0.2
My iphone 5 does not ring anymore after upgrading to ios 7.0.2. It did not happen right away, but maybe 2 weeks ago. I tried turning the "do not disturb" on and add allow everyone to call as well as turning it off but it only vibrates when calls come in. I also turned my phone off and it still only vibrates when calls and messages come in.
I found another feed and said there is a silent button next to volume bar. That was the problem.
-
Word will not open anymore after update
Word will not open anymore after update
Hold down the Shift key when launching Word.
If that fails, try deleting this file.
~/Library/Saved Application State/com.microsoft.Word.savedState
Log out under the Apple in the Menu bar.
Log In and launch Word.
Still failing...
If Word failed to launch in Guest, then you need to re-install Office.
Microsoft Office for Mac 2011 14.4.1 Update (If you have an early installer you'll first need to update to 14.1.0)
Microsoft Office for Mac 2011 14.4.2 Update (requires 14.1.0 to be installed)
Important to restart after each updater. -
I installed Yosemite yesterday on my 2013 MacBook Pro and Word does not open anymore.v Any advice/solution?
How to completely remove Office for Mac 2011
Do it per these instructions, don't just put the apps in the trash. -
My new ipod classic does not work anymore! The music stopped and the display is dead. What now, besides calling support? Useless to say my PC didn't recognize the Ipod anymore either.
Anton, I wish I could help. I had an old iPod Classic (60 KB) as a gift but it went dead, I dropped it a few times accidentally, and it sat carefully saved until I had sufficient resources, energy and time to get the matter addressed. In my case, I actually took the thing (after making sure it was charged) to an Apple store and one of the geniuses at the genius bar at the back of the store took it and did a few things (unseen and un-noted) with his fingers and handed it to me with a sly smile. Voila, the thing was functional. I got a re-functionalized iTunes account and store access when I bought my iMac. I did lose a few tunes along the way because it didn't recognize my new iMac as the source (my old dead PC laptop), but I have a more functional memory than the iPod and recovered them all in other ways. The whole thing is humming better than ever. At over 11 gb full, I have 4.2 days worth of portable listening. Be patient; it took me four years to get musical nirvana in a pocket, but you'll get there faster. Call support.
-
HELP - iMovie11 project does not open anymore
I worked for hours saved it on internal and external drive and all but now it does not open anymore (neither internal nor external) . iMovie freezes right at the beginning of opening the project - progress bar at about 10% nothing moves. I just worked on that project several days and cut the video from 3 hours to 50 mins. any ideas?? PLEASE Dont say I need to start all over.
other projects open all right.
Message was edited by: framelCan you start iMovie from another user account on your Mac? If so, something is corrupted in your User folder, most likely the Plist.
Try going to <User>/Library/Preferences/ folder.
Drag com.apple.iMovieApp.plist to your desktop.
Then restart iMovie.
If that does not help, the corruption may be in your Project file. In this case, if you are running Time Machine, go back in time to a working version. -
Captivate does not open anymore
Hi everybody,
Since yesterday morning my Cap7 does not open anymore.
- I have tried to open the program without opening any projects: failed...
- I have to tried to open specific project directly: failes...
When opening projects/the program I can see the loading bar and the the task manager shows me some CPU and working memory usage. The Cap icon also appears in the lower menu bar. But obviously, as soon as the project is fully loaded (so it seems to me), the program is closed and no more processes are visible.
Background information:
- Win 7
- Cap 7
- in a company environment (last week everything worked without any problems)
- cannot open Cap in administrator mode
I could imagine that there have been any updates or whatsoever from out IT department over the weekend. But if this could be the problem, it would be great to have any idea what COULD be the problem.
Really hoping that you can help as I have to launch course translations in the next days...
Kind regards!Is your company network using virtual My Documents folders or roaming user profiles? If so, that might be the cause of the issue if there has been a change to the location of your My Documents folder. Have you recently moved location in the company?
Since you are unable to open Captivate there's no way to find out where your current Default Locations are. These are shown on the Preferences > General section.
Perhaps one of the Adobe reps on this forum can tell you how to find the Captivate log file that will hopefully show where the launch has failed. In the meantime, contact your IT department, have them remote into your PC and try to launch Captivate using Administrator privileges under their IT admin profile. If the issue is related to privileges, then they should be able to open it. If they can, then try and see what the Default Locations are (as mentioned above). If the default locations are NOT on your hard drive, then change them immediately while the Admin is logged in. -
Ever since updating to OS 10.10.3, my iTunes does not open anymore!
Ever since I updated to 10.10.3, my iTunes does not open anymore.
I have restarted my computer, and tried to open it again but it did nothing. I installed iTunes again and also did not help. Opening iTunes from the application folder in Finder did nothing, as well as opening it from the launchpad did not help.
The app does not even bounce up and down in the dock, it just does nothing.
I think I have tried almost all basic methods. Is there anything else I can do?!
Please help!
(MBPR mid 2012)
Thanks in advanceSame bro, same. Ever get it fixed?
Maybe you are looking for
-
With several past OSX installations, I could open several web sites and back-up to the previous one. Now, with OSX 10.9 (Matrix), in most cases, each new web site overwrites the previous one. In some instances, a second window in a site will allow
-
Create installer with source files
Hello I have a word search game and i have a dictionary and the VI create one file with "last scores". I want to creat installer which indclude this files when im setup in another computer without labview. Thank you! Solved! Go to Solution. Attachm
-
USB port at back of iMac stopped working except keyboard. Why?
My USB ports on back of iMac stopped working, I can't seem to get any power from them. Only keyboard port works.. My externals don't work neither and I got all my hard work on them. I think I've lost info?
-
hi sir am using FCP 7 on Mac Pro. I Want export more than 2 hrs file like 2.30 min Movie. But my My FCP is allow only 2 hr video to export can u help me how can i do.
-
Update query with CL_SQL_STATEMENT class
Hi all, I'm trying to execute an update query with ADBC classes in order to modify two parameters (n_doc and processed) from a row with the following instructions: l_con_ref = cl_sql_connection=>get_connection( 'DB_7879' ). l_stmt_ref = l