My phone is "non-responsive". what do I do?

My phone was working just fine and all of the sudden it was "dead".  I've tried restarting, charging, plugging into my computer.... don't know what else to try. 

Basics from the manual are restart, reset, restore.
iPhone User Guide (For iOS 4.2 and 4.3 Software)

Similar Messages

  • I deleted my iphone with icloud because the phone was lost but it been 16 hours and the phone still without response what can i do

    Yesteday i lost my iphone and i delete it withfind my iphone this morning my iphone was return but is been 16 hours and the phone still deleting itself with only the circle on the front i tried a hard reset but dont work and the imac dont even recognize the phone. WHAT OPTIONS I HAVE?

    I have read a number of threads with the rotating circle in the middle of the screen.  Some have been able to Reset by holding down the Sleep Button and the Home Button until the Apple Logo shows up and then wait for a lock screen.  This had to be done several times in some cases.  Others suggest letting the battery totally run down and then charge for at least one half hour.  Then do a Reset again. 

  • Intermittent non responsive iphone

    my phone is non responsive to touch, it is intermittent but happens at least twice a day, often times when recieving a call or text message. ive gone through a restore, a hard reset anyone have any ideas on what may be causing this

    You've got a defective phone.
    Take it to an Apple Store for repair or
    Call Apples iPhone support @ 1-800-MY-IPHONE
    Jim

  • What are you considering non responsive with the plugins? Flash player is working just fine then I get your crash page in the middle of doing something. You say it only crashes when it's been unresponsive for 45 seconds. Mine is crashing in less then 1

    I have had problems with firefox crashing for the last three month. I have updated to the latest version with the crash protection. Now the flash player crashes about every 20 minutes or so. On your blog page you state that I will get the crash page when the plugin has been non-responsive for 45 seconds well with mine the games are going along just fine then wham crash page. Flash player was responding and you gave me crash report anyway. What's up???? Flash player is crashing within seconds not 45 seconds!!!!!!!!!!!!!!!!! Your check plugin page always states that my plugins are UP TO DATE!!!!!
    == This happened ==
    Every time Firefox opened
    == three months ago and getting worse with every upgrade you send!!!!!!!!!!!!!!!!!!!!!!!

    '''''"I have had problems with firefox crashing for the last three month."'''''
    You need to investigate the cause of your crashes that started prior to the release of the first Firefox version that offered crash protection, version 3.6.4, released in mid to late June 2010; that is just over one month ago.
    <u>'''The crash protection feature does not prevent a plugin from crashing, it prevents the whole Firefox browser from crashing because of a crashing plugin; only the tab with the crashing plugin crashes.'''</u>
    For information about report plugin crashes see: http://support.mozilla.com/en-US/kb/Plugin+crash+reports
    You need to post the crash Report IDs for the crashes occurring over the last 3 months. To do so, type '''about:crashes''' in the URL/location/address bar, then copy and paste the Report IDs (only) into your reply. See: http://support.mozilla.com/en-US/kb/Firefox+crashes#Getting_help_with_your_crash
    In addition, please do the following. Type '''about:support''' in the URL/location/address bar, on the screen presented, click "Copy all to Clipboard" and paste that into your reply.

  • My iphone 4s is saying NO SERVICE.I tried to put it on airplane mode,tried to reset the network setting and also tried to restore my phone but none of the above things worked.Do you guys have any idea what should i do now?

    My iphone 4s is saying NO SERVICE.I tried to put it on airplane mode,tried to reset the network setting and also tried to restore my phone but none of the above things worked.Do you guys have any idea what should i do now?

    Hi sunnylordz,
    Thanks for using Apple Support Communities. Based on what you stated, it sounds like you have no service on the iPhone. It looks like you have already done some troubleshooting. There is one step you did not mention trying that i think is worth trying. 
    If you see No Service in the status bar of your iPhone or iPad - Apple Support
    Remove the SIM card. If the SIM card is damaged, worn, or bent, or if it's too big or small for the SIM tray, contact your carrier for a new one. Then reinsert the SIM card.
    Cheers,
    Mario

  • My iphone is non-responsive--including the on/off button and home button.  What can I do?

    My iphone is completely non-responsive--I can't even turn it off or on.  What can I do?

    Hold both buttons at the same time until an Apple logo appears to reboot iOS. Should take 10-20 seconds of holding.
    If it doesn't work charge for 15 minutes with the mains adapter and do it again.

  • HT1414 IPad less than 1 year old was working perfectly & was fully charged. Went back 2 hours later & it was blank screen & will not respond no matter what I do. Have fully charged but still black screen & non-responsive with nothing happening when I try

    IPad was working fine &amp; fully charged. Screen is now black &amp; non-responsive. Is there something I can try or should I take to service center?

    Try reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.

  • IPhone hangs and non responsive

    Hi,
    I need someone to help me figure out what could be the problem with my iPhone which i got on Jan 9th 2009. I understand it still under warranty but i would like to know if iPhone itself is non responsive or its only my phone which doesnt respond sometimes and screen flashes sometimes.
    Thanks
    Parmar

    Page 34 of the manual:
    "If something is not working right, restarting or resetting iPhone will likely solve the
    problem.
    Restart iPhone: Press and hold the Sleep/Wake button until the red slider appears.
    Slide your finger across the slider to turn off iPhone. To turn iPhone back on, press and
    hold the Sleep/Wake until the Apple logo appears.
    Reset iPhone: Press and hold the Sleep/Wake button and the Home button at the
    same time for at least ten seconds, until the Apple logo appears.
    For more troubleshooting suggestions, see Appendix A, “Troubleshooting,” on page 131. "
    http://manuals.info.apple.com/enUS/iPhone_UserGuide.pdf

  • Address Book becoming non-responsive

    I have taken the I-mac (Lion 10.75) to the genius bar 3 times because the Address book program becomes non responsive after I spend some trying to clean up duplicate addresses (merging them) and updating information.    The first time they said to remove one of the Address book preferences, then the last time, after re-installing trhe operating system, they said to remove ALL the preferrences if it happened again.   It did, and I did, but it did not work.   Specifically, the adress book will not search by name and continues to download duplicate adresses from some mysterious place that is not I-Cloud because the addresse are (mostly) in order on the Cloud. 
    Does anybody have a fix?  Or a recommendation for another address book program that I can synch between I-Mac, I phone and tablets? 

    Note: These instructions are for OS X 10.8 or later. In OS X 10.7, the procedure is the same, but the application is named "Address Book" instead of "Contacts."
    Step 1
    Back up all data.
    Triple-click the line below on this page to select it:
    ~/Library/Caches/com.apple.AddressBookSourceSync
    Right-click or control-click the highlighted line and select 
    Services ▹ Reveal
    from the contextual menu.* A folder should open with an item selected. Move the selected item to the Trash. Log out, log back in, and test. If there's no change, go to the next step.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard (command-C). In the Finder, select
    Go ▹ Go to Folder...
    from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.
    Step 2
    A. If you use iCloud, uncheck the box marked Contacts in the iCloud preference pane. Press return to confirm, or click  Keep on Mac in the dialog that opens.
    B. From the list of groups on the left side of the Contacts window, select All On My Mac. If that group doesn't exist or is empty, skip this step. Otherwise, from the menu bar, select
    File ▹ Export ▹ Export vCard
    Save the exported contacts to the Desktop.
    C. Quit Contacts. Triple-click the text on the line below on this page to select it, then copy it to the Clipboard (command-C):
    ~/Library/Application Support/AddressBook
    In the Finder, select
    Go ▹ Go to Folder
    from the menu bar, paste into the box that opens (command-V), and press return.
    A Finder window will open with a folder selected. Move the selected folder to the Desktop, leaving the window open for now.
    D. Launch Contacts. Your contacts will be gone. If you took Step 2, then double-click the file you created in that step and confirm that you want to import from it. Your contacts will reappear.
    E. Re-enable Contacts in the iCloud preference pane, if you disabled it. Test. If the issue is resolved, delete the AddressBook folder and the vCard file on the Desktop and close the open folder window.
    Otherwise, quit Contacts again and put the AddressBook folder back where it was, overwriting the newer one that will have been created in its place. Post your results.

  • N73 Non responsive applications

    Hi,
    My N73 stsrted to show non responsive attitude in most applications like the camera and gallery viewing, and slow response in contacts and dialled numbers.
    I tried the troublshooting hints in the catalogue but it is not helping any bit.
    I have to shut down the phone in many cases and start all over. or in some cases I click the red Exit key to go back to the standby mode.
    I'm starting to feel sorry I ever decided to go for a "SMART" phone.
    Is there any phone software upgrade or repair, I use English and Arabic languages.
    Thanks in advance for any reply.

    Have you tried firmware upgrades?
    I have the N73 too and found this sort of problem when i first got it (6 days ago!!!!!)
    Checked out latest drivers and seems ok although if you have full/almost full memory this can cause "lag" too so if you have a miniSD card transfer whats on the phone memory to the miniSD and also back up to your pc/laptop(if you have one)?
    This may help?
    Oh and although miniSD cards are good don't fill them right up, they like any memory need abit left over to function properly.
    Hope i helped out abit?
    Good luck

  • Was updating my touch this morning when an error message occured, itunes became non responsive and was shut down.  My touch is locked in the itunes update mode and my computer no longer recognizes the touch.  How do I correct?

    During update, error occured and Itunes became non-responsive and shut down.  My Itouch is now locked in the itunes update screen and is no longer identified by my computer.  How do I fix this problem?

    Try this:
    DFU Mode / Unable to Update or Restore
    http://support.apple.com/kb/HT1808
    DFU Mode
    Open iTunes and Connect the iPhone to your Mac
    Press and Hold the Sleep/Wake Button and the Home Button at the Same Time
    After 10 Seconds release the Sleep/Wake Button until iTunes tells you it has Detected an iPhone in Recovery Mode...
    The Phone Screen will remain Black... Now Restore.
    Backing up, Updating and Restoring
    http://support.apple.com/kb/HT1414

  • Cusrsor Freezes up and is non responsive- Solution?

    I am using a mouse with my newly purchase C2D MBP and still from time to time, getting the non responsive frozen cursor. As far as I can tell, there appears to be no rhyme or reason to this. This is my second computer. First there was an odd low pitch beeping sound coming from the left side near speaker as well as the non responsive frozen cursor. Exchanged the computer for exact same model I have now. No longer have the beep but noticing lately there is still the non responsive frozen cursor problem I had with the original one. The Apple solution as far as disabling track pad really has no relavelance to the problem I am experiencing with my computer as well as I see from others in this discussion. I'm not sure what to do at this point. Any suggestions?
    Macbook Pro C2D MBP   Mac OS X (10.4.8)  

    1. Try unplugging the mouse and plugging it back it when it freezes.
    2. Note the exact time if freezes and check your system logs in your Console application for clues.
    3. Boot from your system install DVD, play around with the mouse awhile and see if you can get it to freeze. This will help determine if it's software or hardware related.
    4. You could have some bad sectors on your hard drive. Back it up and do a "Zero all data" reformat. Then clone everything back.
    -Bmer
    Mac Owners Support Group
    Join Us @ MacOSG.com
    ITMS: MacOSG Podcast
     An Apple User Group 

  • HT1414 My ipad is non responsive to touch.  I have tried updated the software and restoring the device to factory setting and it still does not respond.

    My ipad2 is non responsive to touch.  I have updated the software using ITunes and have restored the device to factory setting and it still does not resonse.  Has anyone had this problem?  What do you suggest? 

    Frozen or unresponsive iPad
    Resolve these most common issues:
        •    Display remains black or blank
        •    Touch screen not responding
        •    Application unexpectedly closes or freezes
    http://www.apple.com/support/ipad/assistant/ipad/
    iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
    http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
    What to Do When Your iPad Won't Turn On
    http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
     Cheers, Tom

  • Server 2008 becomes non-responsive intermittently

    Hi,
    I have a virtual server which becomes non-responsive intermittently. The mstsc command will not give the login window and will push me back to the mstsc login screen ( where we enter the hostname we want to remote into ). If I try to login from Vmware console;
    after entering the credentials and hit enter, it will push me back to the login screen again. Then I will be left with one option, which is reset it from console.
    Can someone help me here to solve it? Why its happening and what is the resolution ?
    Thanks in advance,
    Noufal

    Hi
    are there any errors in the event log when this happens? Is this server a domain controller?
    When it doesnt respond are you still able to ping the server?
    Hope this helps. Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.
     Yes, see if you can ping both IP and Host name at this point. I have seen this happen in a non domain environment.

  • "non-responsive script" -- appears on screen/ extreme slows down or freeze/field can appear as many as 7 times each time i click on stop "non-responsive script"/each time the field returns immediately on screen.Frustrating!I dislike freeze or slow...

    I researched the net and a lot of people are having the same problem, but did not find answers.
    1. I turn on the PC and experience very slow to open firefox.
    2. Then a field pops up "Non-responsive script may be what is slowing down your computer". There is computer language written in the field. In this field are 2 small fields to click on: "continue" or "stop script". I can click on stop or continue numerous times and no reaction. Then I click on close no reaction. Then finally it goes away only to pop back up as many as 6 or 7 times. It can occasionally take as long as 20 min. to open the browser. Other times the computer is just slowed down.
    3. There appears to be no pattern as to when this "non-responsive script" field can appear. Even when I first turn on the PC and have not opened the browser yet it can appear in the upper left hand corner of the screen.
    4. Any suggestions or help you could provide would be appreciated.

    I researched the net and a lot of people are having the same problem, but did not find answers.
    1. I turn on the PC and experience very slow to open firefox.
    2. Then a field pops up "Non-responsive script may be what is slowing down your computer". There is computer language written in the field. In this field are 2 small fields to click on: "continue" or "stop script". I can click on stop or continue numerous times and no reaction. Then I click on close no reaction. Then finally it goes away only to pop back up as many as 6 or 7 times. It can occasionally take as long as 20 min. to open the browser. Other times the computer is just slowed down.
    3. There appears to be no pattern as to when this "non-responsive script" field can appear. Even when I first turn on the PC and have not opened the browser yet it can appear in the upper left hand corner of the screen.
    4. Any suggestions or help you could provide would be appreciated.

Maybe you are looking for

  • BAPI_PO_CREATE1 - Service order Creation

    Hi, Im trying to use BAPI_PO_CREATE1 to create service orders using the test run in ECC6 but the return table shows an error 'Please maintain Services or limits' . With the same values i'm able to create a service order by running the transaction onl

  • Concatenated fields in NOT in

    I have a Query as follows select * from tab1 where (fieldA,field1|field2|field3|field4|field|5) not in (select fieldA,field1|field2|field3|field4|field|5 from a Big SUB Query) Due to the Concatenations and not in this query is taking too much time. H

  • Min/Max  Internal Orders 1 Requisition

    We are running Min/Max planning to replenish stock in an "Emergency Warehouse" organization. The requisition import kicks off internal orders to a replenishment organization. The planner in the replenishment organization would like one order for each

  • Why is InDesign preventing me from using a font I own?

    Years ago I bought a collection of OPTIfonts which I still use on occasion. InDesign today is not letting me use OPTI Calculator, a digital alarm clock face. It either won't recognize it (even though it shows up in the list of fonts I activated, or s

  • Flex printing broken by Flash 10.1.53.64 upgrade

    We have a large base of flex applications whose printing is now broken on any machine which upgrades to the 10.1.53.64 Flash upgrade.  The pages print with white vertical and horizontal bars running through them.  Have definitely verified that this i