My phone will not vibrate and has no sound to it. Therefore I can't listen to music or videos.
my phone will not vibrate and has no sound to it. therefore I can't listen to music or videos. I've tried turning it off and back on and still nothing.
did you use the mute switch in the side?
Similar Messages
-
Phone will not vibrate and all my settings are correct.
Phone will not vibrate and all my settings are correct.
If you're sure Settings are correct then do a reset (Hold Sleep/Wake and Home buttons about 10 secs or more till Apple logo appears)
Note: You will not lose any data. -
I have an iPhone 3gs and today it started just vibrating instead of ringing and vibrating. It also has no sound what so ever. None of the apps or games have sound and I was wondering if anyone has any clue as to what could have caused this and how I can fix it.
Thank you!Settings>General>Accessibility>Zoom>OFF
-
My phone will not vibrate. Is there something I can so to make it vibrate? I have tried everything on the phone to make it vibrate but it will not. Any help is appreicated.
Good Afternoon gdfkjf,
That must be frustrating! I would like to ask you some probing questions and offer some recommendations.
How long has the problem been happening?
Is it occurring with calls, messages, e-mails or alerts?
Have you tried a soft reset by removing the battery?
Is your software up to date? The latest version is: i500.EH03
I have included additional links below to assist you.
goo.gl/yqafL
Sincerely,
JonathanK_VZW
VZW Support
Follow Us on Twitter@VZWSupport -
Phone will not ring and goes to voicemail
My phone will not ring and always go straight to voicemail. I have rebooted, updated, etc but still have this problem. Anyone have a solution???
Contact your phone carrier.
-
My iphone will not vibrate or make a sound when receiving a text message
for some reason since yesterday, my Iphone will not vibrate or make a sound when I receive a normal or Imessage text message.
I double checked that vibration works in general and it does. so does the sound file for the Text tone.
My ringer works fine as well as vibration for incoming calls but nothing works with a normal text message (even whatsapp works fine).
I have no idea what could be the issue here.
Any ideas?- Unmute your phone
- Set your Ringtone to default
- Adjust your volume
- If you're on iOS6 - DO NOT DISTURB feature turn it OFF
Try again -
Hi, I've just installed mavericks but my HPc4180 will not print and is showing a 'blank' page in previews can anyone help me?
A few suggestions for you:
Try:
uninstall all HP utilities or other HP apps on your Mac
see if there is updated software on the HP website
go to System Preferences > Printers & Scanners > Print
control-click on your printer in the column on the left
select "Reset Printing System..." and "reset" in the dialog that follows
Do a factory reset on your printer
go back to printers & scanners and it should see your printer and download a driver for it from Apple -
Hi, I've an iPad Mini with the latest version 6.0.2, a windows 7 Home Premium laptop and iTunes 11.0.1 (12), but I can't synchronize my music or videos with it. I managed to syncronize my books but thats all.
I also have an iphone 5 and everything seems to work fine with it.
I see all movies and music available to be sync but when I click on the sync button, the process starts, the bottom bar shows an increase in consumed space then nothing happens and the bar goes back as nothing was added.
Please help..
I have tried everything but nothing works.Thanks Sk8dreams,
....but I wish I could have lol like u right now..
If I could get a free iPad everything I'd already kept my iPad connected and restarted iTunes, I think I'd have had a truckload of them by now...
I've done all of these..
Like I said earlier I syncd everything to my iphone5 successfully...
I got my PDF ebooks to this same iPad... Films & Music do not seem to be getting through..
I'm sure someone out there knows what to do.. -
Please help.
iCloud on my iPhone still has my old email in it with no option to update it. I have no access to the old email. I updated my email and password online via my macbook, but my phone will not recognize either! It keeps popping up a screen for me to enter my password, but it says it's incorrect.
How do I fix this on my phone?????
I can't fix it online because my iCloud online (although working) does not recognize either of my devices because they need updated….which I'm not able to do due to storage issues.
I just want my phone to recognize the new email and password!!
I have no idea what I'm doing but I'm about to throw this phone across the room.
thanks!Welcome to the Apple community.
If you mean that Find My Phone is asking for a password to a different Apple ID to your current Apple ID and that ID is a previous version of your current ID, not an entirely different one.
This feature has been introduced to make stolen phones useless to those that have stolen them.
However it can also arise when the user has changed their Apple ID details with Apple and not made the same changes to their iCloud account/Find My Phone on their device before upgrading to iOS 7, or if you restore from a previous back up made before you changed your details and some other circumstances.
The only solution is to change your Apple ID back to its previous state with Apple at My Apple ID using your current password, you don’t need access to this address if it’s previously been used with your Apple ID, once you have saved these details enter the password as requested on your device and then turn off "find my phone" and delete the account from your device. It may take a short while to remove the account.
You should then change your Apple ID back to its current state, save it once again and then log back in using your current Apple ID. Finally, turn "find my phone" back on once again.
This article provides more information about Activation Lock.
This is answer is provided from my own database of boilerplate responses and the content was last reviewed and tested on: 2014/05/23
You should still be able to log into an old email account, even if you haven't used it for some time, very few providers delete email accounts. -
HT201412 tried to update to ios6 now my phone will not even restore has fault 3014
today i tried to update to ios6 and now my phone will not even restore it says it has fault 3014
how did you do the update? i had teh error when i tryed to do over wifi. I had to plug into the computer to finish the update.. Make sure you are running the latest version of itunes or you will get errors as well
-
Please help me. This will not work and I know my charger works is there a way to charge it without the charger.?
I've also heard about these glitches
-
After downloadingOSX I have not been able to open iphoto. It has the spinning icon for the last 2 1/2 hours and will not let me open nor quit the applications. Is this because of the amount of photos i have in the program? I'm sorry i downloaded the update. I have work to do with the photos
I was able to turn it on but when I turned on WiFI the apps would not open and the phone crashed again and turned off.
-
My phone will not vibrate when I switch to vibrate
My iphone does not vibrate when turned to vibrate. How do I rectify that?
For IOS 7.0.6 and IPhones 5S
I spoke with a Tier 3 Apple Tech yesterday..
I followed her instructions and did the same on all three of my IPhone 5S phones. The problem was immediately resovled and fixed on all of them. It has not recurred.
That side button, above the volume controls must be showing orange.
In SETTINGS:
1. Go to Sound,
2. Under VIBRATE - make your choices on whether you want to "Vibrate on Ring" and/or "Vibrate on Silent."
3. Go to RINGER and ALERTS (right under VIBRATE).
4. Under CHANGE WITH BUTTONS - make sure you're showing the green part of the slider.
Then as long as you have a ringer tone and a vibrate tone selected, exit out of there.
If your phone's side button (the "silence" button) is showing orange, you should have no problems and everything working as you want, just as I did.
If your phone's side button (the "silence" button) is not in the orange postion, your status quo before all of the above should remain in effect.
Again, this "silence" button is directly above the volume buttons on an IPhone 5S.
Hope this helps. -
I very recently got my new iPhone 6. I got it on new years eve. I'm not sure what version of the OS it is on, but I'm going to assume it is on the latest, 8.1.2. Today has been the only day i have had an issue. Earlier in the day the phone froze and the Wifi was showing to only have one bar. They Phone then shut off and flashed a red screen for about a second. After that, I had no issues for a few hours. Later that night the phone crashed three times. 2 of them showed a blue screen before crashing. The third time the phone would not let me open any apps and then just shut down, and as of right now it has not turned back on. Is there a way to fix this or am I going to have to replace my phone?
I was able to turn it on but when I turned on WiFI the apps would not open and the phone crashed again and turned off.
-
Insomnia (phone will not sleep and cannot be switched off)
I have had problems after trying out the Z2 mag charging dock, my phone keeps waking the screen when it is being charged (the screen timeouts and turns off before being turned back on again after a few seconds, showing the lock screen), even after i switch back to the standard USB charging cable (charging directly to the microusb port). I have checked developer options and keep screen awake when charging is not ticked so that's not the problem.
Additionally, my phone is not able to be switched off. When i switch off, it will enter into a sort of bootloop where the phone will spontaneously turn itself on showing 'Sony' screen > black screen and it repeats this cycle. The phone can however be turned back on during this bootloop if i i press and hold the power button while the screen is black.
I have scanned the phone using various reputable antivirus apps and none of them have turned up anything. Did a factory reset but it didn't solve either problem.
Appreciate any help I can get.Hi, I know its been a while since you posted this issue, but was wondering if you have got it solved and if yes how you did it.
I have run into excactly the same problem yesterday after accidentaly connecting magnetic charging cable the wrong way.
The phone went instantly dead (battery discharge), after that Red Light came on and starting blinking when on wall charger.
I left it on charger for 4 hours and was able to get it restarted. Now whenever I put it on charger the screen will not sleep. It will dim and turn off but straight away turn on again. I have run PC Companion twice to repair but it is still doing the same thing over and over again. I also have the issue that I cant switch it off as it will go into a Sony Logo Bootloop. I have to force shut down and then I can charge it without problem. Once I remove phone from charger it will go into Sony Logo Bootloop again until switched on.
Any ideas??
Maybe you are looking for
-
Unable to log in to SAP ES workplace HU2 system; Client 800
Hi, I'm unable to access the below SAP IDES system using the link https://esworkplace.sap.com System - HU2 Client * - 800 User * - P610131 I get this message. User account not in validity date. To log on please register on SCN: http://www.sdn.
-
I need to plug ins extract for photoshop cs5
I am happy to use photoshop cs 5 but my cs 5 do not have plug ins extrac to crop my on ap lioa and crop my images on ap standa in my website. So I have seached innternet to install . Now you can help me to find that plug ins to use for my work. Thank
-
ABAP for Super Dumps: Import- & Export-Parameter for a Table in a FM
Hello ABAP Profs, sorry I am BW. <b>Import- & Export-Parameter for a Table in and out of an Function Modul.</b> I want to import a table into a Function Module, change it and export it again. How do I have to define the Import- and Export- Parameters
-
Hi, Here is part of my logical layer (BMM): Dim - Time: TIME_KEY, ... Dim - Client: CLIENT_KEY, ... Fact - Encounters: # Visits ( i.e., count(distinct(EVENT_ID) ) The above fact table contains foreign keys (TIME_KEY, CLIENT_KEY, etc.) to all dimensio
-
Post Author: Sherif_hfm CA Forum: General Hi every onewhen I use Crystal Reports 9 or 10 I can Generate Reports and view at run time without I need to save it but now with Crystal Reports2008 I can not do that , If anyone know how to make that in C