My phone won't take updates and crashed in the middle of updates.and now my phone crashes

Q~I tried to update my phone and it stoped in the middle of the upgrade. Now it drop calls every 40sec .won't take updates or restore HELP PLEASE!! don't want to loose contacts and music already lost ringtones :^(

I found the solution to my problem.

Similar Messages

Rebel t3 won't take pictures and now there's a floater when I look in the viewfinder

I've had my camera for 8 months and it just stopped working. I've been in contact with Canon about the camera not taking pictures. They've given me some troubleshooting to try and so far it looks like a lens issue. The last instructions I was given said to remove the lens and clean the metal contacts, which I did. After doing that now I see a floater when I look through the viewfinder. Any ideas?

Does this only show up when you look through the viewfinder? E.g. Does it appear in a photo or in live view mode?
If only in the viewfinder then you may have a bit of dust, etc on the focus screen.
Using a hand-squeeze blower (e.g. A Giotto Rocket Blower, etc. avoid cans of compressed air because they can spray some propellant which leaves a hazy residue.) to gently blow out dust.
The focus screen has a fine textured surface and if you touch the screen you can easily make things worse.
Tim Campbell
5D II, 5D III, 60Da

I have two apple id's because my hotmail account is no longer active. How can I delete the old one and use or update the new one? Every time I try it won't allow me and now my iPad thinks there are two accounts and they are arguing with each other. Help!

I have two apple id's because my hotmail account is no longer active. How can I delete the old one and use or update the new one? Every time I try it won't allow me and now my iPad thinks there are two accounts and they are arguing with each other. Help!

You can't merge accounts or copy content to a different account, so anything that you bought or downloaded via the old account is tied to that account - so any updates that those apps get you will only be able to download via that account. You can change which account is logged in on the iPad via Settings > Store

Tried charging my 2009 MacBook Pro but the green light won't turn on and now my computer won't turn on (it was working right before I attempted to charge it!) what do I do????? Even tried using another charger I had for it and nothing! Help

Tried charging my 2009 MacBook Pro but the green light won't turn on and now my computer won't turn on (it was working right before I attempted to charge it!) what do I do????? Even tried using another charger I had for it and nothing. No green light. Computer turn on. Now what??? Help!

QUOTE: "No green light. Computer turn on."
What? so were you able to turn on the computer with the new plug? does it give you any other light? amber/orange light?

Hello, I use MAC AIR OSX 10.6.8 and have Adobe CS2, that I was using 2 years ago on my older computer. I stopped using it because it would close down in the middle of work. Now I would like to reinstall it on the MacAir but I can not get it working. It te

Hello, I use MAC AIR OSX 10.6.8 and have Adobe CS2, that I was using 2 years ago on my older computer. I stopped using it because it would close down in the middle of work. Now I would like to reinstall it on the MacAir but I can not get it working. It tells Adobe doesnT support my System. But I can not update my old version or activate it. What can I do?

The mac you want to install photoshop cs2 on is running mac os x 10.6.8 Snow Leopard?
(photoshop cs2 won't run on intel macs with mac os x newer than snow leopard)
Did you ever have cs2 installed on this particular computer before?
If the problem is that you already installed cs2, but it won't activate, that's because adobe took the activation servers offline for some older adobe products such as cs2.
You'll need to use the non activation version of cs2 from here and the supplied serial number:
Activation server shut down for Creative Suite 2, Acrobat 7, and Macromedia products

I restored my iPod in the middle of a download, now it can't do anything but restore, and when i restore it, the screen gets stuck on weird things, like the apple screen or purple or yellow. how do i get it un-stuck?

i restored my iPod in the middle of a download, now it can't do anything but restore, and when i restore it, the screen gets stuck on weird things, like the apple screen or purple or yellow. how do i get it un-stuck?

Try:
- iOS: Not responding or does not turn on
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

Won't take discs and won't start

My iBook G4 is 1 year and 2 months old - unfortunately my warranty JUST ran out. I have never had a problem with my computer before....it was sleeping the other night and it woke me up because it was so loud. It was making wierd noises/crackling sounds. I forced a shut down. Now, when I start it up, it goes to the Apple screen with the wheel turning...and then the wheel just suddenly stops. And it all of a sudden won't take any CD's or DVD's, so I can't even install OS or run hardware tests.
I called Apple support...they think it might be the logic board but it' going to cost $700 for them to fix. Does anyone have any other suggestions? Thanks!

Do you have access to another Mac with FireWire? If so, you may be able to run the Disk Utility from that computer on your iBook's hard drive since you can't use your CD drive on the iBook. You can use FireWire Target Disk Mode to access your iBook's hard drive from another Mac. If you can't startup in "target" mode, then it's more likely that your logic board is having trouble than your hard drive.
-Doug

Sleep - won't wake up, and now randomly goes off to sleep

Since the recent security update, my 1.67 G4 Powerbook has been experiencing problems with sleep. Sometimes it won't wake from sleep, forcing me to hard reboot or pull all power out, and now it's randomly falling into sleep when it shouldn't.
The issue is progressive - it will sleep, then I wake it, then it goes down again 2-3 minutes later, wake, then seconds, wake, then deep somnambulistic slumber.
I read in Macintouch that there was a fix recently for Intel MacBooks and sleep, but some of us in the PPC world are feeling it's effect.
I've reset the pram several times, and on one occasion the fan spun up very loudly on boot, then quieted down after 5 seconds. Might be nothing.
Another factor is the battery - pull the battery and the system behaves better. I wonder if there's a lowered thermal limit that, when the battery is charging, causes the system to shut to sleep...?
Anyone else having this problem? I'm ready to slip back to 10.4.9 to see if that makes it more stable -- this happens several time a day now.

For other who may be watching this...
The laptop did keep shutting down into sleep, but - following from a tip from another site - I began trying three things: One or all seem to have resolved the issue:
* Repair permissions - often and always. Something does get munged and I'd be interested to see if anyone else has the same files affected:
Permissions differ on ./Library/Widgets, should be drwxr-xr-x , they are drwxrwxr-x
Owner and group corrected on ./Library/Widgets
Permissions corrected on ./Library/Widgets
Group differs on ./usr/bin/fetchmail, should be 0, group is 6
Permissions differ on ./usr/bin/fetchmail, should be -rwxr-xr-x , they are -rwxr-sr-x
Owner and group corrected on ./usr/bin/fetchmail
Permissions corrected on ./usr/bin/fetchmail
Permissions differ on ./usr/lib/php/build/Makefile.global, should be -r--r--r-- , they are -r-xr-xr-x
Owner and group corrected on ./usr/lib/php/build/Makefile.global
Permissions corrected on ./usr/lib/php/build/Makefile.global
Permissions differ on ./usr/lib/php/build/acinclude.m4, should be -r--r--r-- , they are -r-xr-xr-x
Owner and group corrected on ./usr/lib/php/build/acinclude.m4
Permissions corrected on ./usr/lib/php/build/acinclude.m4
Permissions differ on ./usr/lib/php/build/mkdep.awk, should be -r--r--r-- , they are -r-xr-xr-x
Owner and group corrected on ./usr/lib/php/build/mkdep.awk
Permissions corrected on ./usr/lib/php/build/mkdep.awk
Permissions differ on ./usr/lib/php/build/phpize.m4, should be -r--r--r-- , they are -r-xr-xr-x
Owner and group corrected on ./usr/lib/php/build/phpize.m4
Permissions corrected on ./usr/lib/php/build/phpize.m4
Permissions differ on ./usr/lib/php/build/scanmakefilein.awk, should be -r--r--r-- , they are -r-xr-xr-x
Owner and group corrected on ./usr/lib/php/build/scanmakefilein.awk
Permissions corrected on ./usr/lib/php/build/scanmakefilein.awk
Permissions differ on ./usr/lib/system/libmathCommon.A.dylib, should be -r-xr-xr-x , they are -rwxr-xr-x
Owner and group corrected on ./usr/lib/system/libmathCommon.A.dylib
Permissions corrected on ./usr/lib/system/libmathCommon.A.dylib
The privileges have been verified or repaired on the selected volume
Verify/repair finished permissions on disk disk0s3 Macintosh HD
* I stopped zapping the PRAM when it went to sleep or wouldn't stay awake on boot - I just booted from DVD instead and, lo and behold, the thermal errors didn't occur under the DVD. Fixed permissions and a reboot it often worked fine for hours.
* Running it alternatively from either battery or from mains. Initially under the battery, it would sleep at 70-60%, then - after a few days of being shut down instead of slept - it began running down to 0. I'd have to plug the unit in and charge it whilst off, but now -- after a week of this - everythings back to normal.
Ultimately, I'm sure this software. Something is up - and slowly, if you're patient, you can bring your system back without buying a new case or motherboard.

ZEN Micro won't turn Off and now won't turn

Hi Everyone, hope you can help me out here.
I have been using my ZEN micro for about week now and it was at first working fine.
Then it started not turning off, so i had to pull out the battery.
This is obviously very annoying, but it got worse over time.
It now won't turn on unless i switch it about 30-40 times.
What is going on, is there a way to fix it and is anyone experiencing the same problem?
Thanks very much,
Fern

FernIe, I have the exact same problem, although now my Zen Micro won't turn on at all via the switch.
My Zen Micro is 5 months old and its only been over the past few weeks I've been having problems. It started with having to hold the switch in the power on position for a least 30 secs and trying it at least 5-0 times before the player would turn on, and having to remove the battery to turn it off. Now, not matter how many times I try the switch or how long i hold it for, the player won't turn on.
The battery is fully charged and I have never had problems with the headphone jack, and I haven't dropped it or done any damage to it that I think could be causing it. I'm having to turn it on by plugging it into my computer through the USB cable and then unlpugging it once its on, it's a pain doing this and means if I want to use it later I have to keep it on, muted, in my bag all day with the lock turned on (that end of the switch works) then once its turned off I can't turn it on again until I get near a computer again.
I've searched the discussions and knowledge base but haven't found an answer. I've just emailed the support team and I'm waiting for their response, would be interested to know what they've told you.
Just letting you know your not alone and I feel your pain!
Jen

My computer shut down in the middle of syncing in now my ipod is frozen. it won't turn on or off

my computer shut down in the middle of syncing and now my i pod is frozen. it won't turn on or off

See Here for,
Frozen or unresponsive iPod touch
Try this First...
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...
http://support.apple.com/kb/ht1430
If none of the above works, you may need to do this
http://support.apple.com/kb/HT1808

Nano won't take updates (error 1417)

Hi, my Nano won't let me take the newest updates. If is giving me and error message 1417. That's all it is stating.
My Nano won't let me dissconnect either. There is another message...The device 'Generic Volume' cannot be stopped right now. Try stopping the device again later."
I just want it work cause I paid for a product that seems like after the warrenty is up it turns to crap.
Please help!

I have followed the instructions but failed to restore my iPod.
I could not use my iPod now as the iPod screen only show "Use iTune to restore".
Should I send the iPod to service centre or any other step I could take?

I have a new mail update and it won't even open, and now I can't use the old mail app either.

I have a new mail upgrade and it won't even open. How do I fix this?

You mean the Apple Mail app? Updated through software Update in the Apple Menu?.
Or maybe you downloaded Mail from another source?
Do you still have Snow Leopard or didn't you update your profile?

Old Username won't go away and now I cannot update my Apps! What can I do?

When I synced my iPad 2 to my iTunes, it asked me to update the iPad to the new OS, which I did. Then it asked me to pick a username that had an email address. I already had a username from way back when I got my first iPod, but it was not an email address and the updated system would not accept it. I gave the email address that was associated with my account and the system continued on.
Once everything was updated, I went on my iPad and tried to update my apps. The window that popped up however had the "old" username, the one without an email address. I tried the password associated with that username, but it said that the password was wrong. I tried a few times until it got me to the forgot password screen. There, I used the send email authentication option, but I don't get an email to the address associated with that account. For the other option, the security question, it asks for my birth date and once I enter it, it says that the information does not match their records.
I have tried to sign out and re-sign with the new ID, I have visited the Apple store twice, spoke to somebody on the phone, nobody can solve this issue. At the store last night the "genius" re-setted it to factory settings and asked me to try to download a free app. When it asked for the password, the "new" ID, the one with the email address, popped up. I thought I was finally OK. But nope. When I synced the iPad with my iTunes stores to get all my apps previously purchached under the "old" username, the same problem persists.
PLEASE, Anyone has an idea on how to solve this?

I've been having the same problem for days and just solved it. Tried going to Apple ID and had all the same problems you did in the second paragraph. I signed out with my current username on the ipad under settings--->store and signed back in with my oldest apple id and password. Now the apps don't ask for a password to upgrade. I too had a username that wasn't an email address and had to change to one that was at some point. That's what caused the problems. Hope this can work for you.

80GB Classic won't take updates or Sync.

I have had my I-Pod for about 1 month now and it never had a problem before today.
When I plugged my I-pod into my computer tonight asked me to upgrade to firmware 1.1.1 I clicked yes and it seemingly worked, but when it completed the update and restarted I was back to square 1 and it asked my to update again like nothing had happened.
If I choose not to update I then run into one of two sync errors. I am either told that "The iPod "Name of iPod" cannot be synced. An unknown error occurred (-50)." Or "The iPod "Name of iPod" cannot be synced. The required disk cannot be found.
I have tried restoring the iPod and in much the same way as the update install, it seems to restore the iPod, both when it restarts and connects with the computer it is not restored and still contains all the files and data that were on it to begin with.
I have read through similar problems and have tried the trick of clicking "enable disk use" and using the device manager to "scan for hardware changes" but this does nothing.
I am suspicious that "enable disk mode" isn't taking since when I disconnect and then reconnect the iPod the box is no longer checked.
Does anybody have any ideas that might help me?

I had this very problem.
It turned out to be a problem with a bad keyword in iPhoto (one I didn't even know of because the picture was e-mailed to me).
Here is my suggestion: look for the file AlbumData.xml (in Pictures/iPhoto Library) and open it in your browser (for instance Safari). You may have an error message saying your file is incorrect at line x. If such is the case, open AlbumData.xml with an editor and look at that line. It will give you an indication of what went wrong (an unclosed tag with a keyword in my case). Open iPhoto and remove the offending keyword. At this point reboot your computer and your iPod for good measure. Resync.
It worked for me...

I need to sync my iCal with MacBook but Macbook won't take Lion and old sync does not work

I need to sync my iPhone 4 with my MacBook. I have a .mac account.
CE Grim MD

Disk Utility is Version 11.5.2 (298.4) on OS X 10.6.8 with all updates.
Lilkey what has happened is yours got corrupted or there is some sort of permissions or other issue that it didn't get updated.
I recommend you backup your files of the machine to a external storage drive, then run through this list of fixes to tune and repair your machine.
..Step by Step to fix your Mac

My phone won't take updates and crashed in the middle of updates.and now my phone crashes

Similar Messages

Maybe you are looking for