My picture is not fitting on the screen
When I use the hdmi input on my pavilion 27xi the picture does not fit on the screen. I have tried other devices and different hdmi cables to check that none of them were faulty but they werent. On the monitors image control settings there is fill to screen or fill to aspect ratio which cant be sellected. Is there any soloution??
stevblair97
Welcome to the HP Community Forum.
There is a solution in Windows and Linux; there may be a solution in OSX if you can get to the graphics controller on your Operating System and adjust the Aspect Ratio within the graphics controller software.
For example, NVidia and Intel provides software within Windows and / or Linux that allows one to adjust the monitor Aspect Ratio for primary and secondary monitors.
For Example:
In Windows, assuming one is running an Intel Driver, one need only Right-Click on the Desktop to gain access to the Intel Graphics Properties. While obviously different in OSX; it should be reliatively as easy to find the Graphics software, assuming you have access to it at all.
I am sorry I do not speak Mac else I could be of more direct help in the matter.
I hope this helps in some way.
Click the Kudos Thumbs-Up to show you appreciate the help.
I am pleased to provide assistance on behalf of HP. I do not work for HP.
Click Accept as Solution when the Answer provides a Fix or Workaround!
Kind Regards,
Dragon-Fur
Similar Messages
-
IOS 8 iPad 3 in landscape - safari will not fit across the screen
While using iOS 8 iPad 3 in landscape - Safari Google searches will not fit across the screen. It use to and still does on my iPhone 5 using same iOS 8.
Does anyone know how to fix this please? When looking at a website it's ok.DDid some testing (why the double "d" in did?)
ASsume (why is the "s" capitalized?) I have bob bailey set up for a shortcut of bo. As soon as I type Bo, it freezes.
I Had probably 50 shortcuts that I used constantly. Now I need to delete most of them. I was tired of typing my email addresses and home address etc so I devised shortcuts for them. With iOS 7 I could enter a shortcut and choose to use it or not while typing.
TAlk all about a huge step back. (Why dles it keep capitalizing the second letter?????? , see the word "talk" at the beginning of this sentence.
OK and why does the forum tell me im someone else and not let me post this? Arghhhhhhhhhhhhhhh -
Photo does not fit in the screen
I watched that video http://www.youtube.com/watch?v=KJMi5l9Ru-g and tried this to do the parallax scrolling with the image this on my page. Unfortunately, my photo does not fit in the whle screen, even if I take a . jpg image 3000 px wide. ( look here ) I have no idea how I can get the photo to fit in the whole screen.
Thank you for your help.
HeikeHello again,
I'm sorry, but nothing works and I don't understand, what you mean. I will show you again with no other item on the page. I draw a rectangle which snaps each of the lines at the outside.
I got rid of the stroke and the fill.
I filled with a .jpg image 3000 px wide.
For the future parallax scrolling I need to set up the photo in vertical tile. And this is, how it shows on the screen.
I still have no idea, what I made wrong. Thanks for your help
Heike -
Why is it that with iOS 7, pictures do not fit the screen?
When I try to set pictures as the background on my iPhone 5, they do not scale to the screen. Although a little problem that I have tried to ignore, it's become very annoying. It only started doing this after I updated to iOS 7 and had carried on through the updates. Help!!
Hi bkraeutle14,
Thanks for visiting Apple Support Communities.
If pictures you set as wallpaper are not scaling correctly, for example they appear too "zoomed in," you can reduce screen motion to minimize this behavior:
iOS 7: How to reduce screen motion
http://support.apple.com/kb/HT5595
iOS 7 uses a parallax effect to create the perception of depth on your Home screen and elsewhere.
To reduce the effect, you can turn on Reduce Motion in Settings > General > Accessibility. When you turn on Reduce Motion, Home screen transitions will fade instead of zoom.
When the parallax effect is on, you may notice the following:
Wallpaper, icons, and alerts shift slightly as you move your phone.
When you set a wallpaper in Settings > Wallpapers & Brightness, the photo or image will be slightly zoomed and can't be scaled to fit the screen.
If you zoom in, you will need to rescale your wallpaper to fit to the screen. You can't rescale certain photo formats, including landscape or square images.
To learn more about iOS 7, refer to the user manual.
All the best,
Jeremy -
With the new update when I got to set a photo it won't let the pic to shrink to fit to the screen even though I try it just stays big. How can I get it to shrink down
See this Apple Best Practices Guide, about half way down the page:
Final Cut Pro X, Motion 5, Compressor 4: Installation best practices - Apple Support
It gives the recommend procedure.
MtD -
I can no longer see my pictures.....the screen is white boxes but when I click on the box an exclamation point pops up. Please Help!!!!
The exclamation point occurs when iPhoto breaks/loses the file path to the original file. So try the following: make a temporary, duplicate copy of the library and apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Select the options identified in the screenshot AND
the option to rebuild the small thumbnails.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
Download iPhoto Library Manager and launch.
Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
In the next window name the new library and select the location you want it to be placed.
Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT -
Xr2 v3-p remote where is the zoom button tv picture is to large for the screen
I have just gotten a replacement dvr box and subsequently I have a new remote. The picture is to large for the screen. My old remote had a zoom button. This xr2 v3-p remote does not. I searched the forums and older postes say to press xfinity and then find the gear. My remote doesn't do that either.
themamalama wrote:
I have just gotten a replacement dvr box and subsequently I have a new remote. The picture is to large for the screen. My old remote had a zoom button. This xr2 v3-p remote does not. I searched the forums and older postes say to press xfinity and then find the gear. My remote doesn't do that either.
For your Cisco/Scientific-Atlanta brannded DVR, it sounds like the user settings may need to be adjusted.
To access the user settings, turn OFF your set-top box; it will remain in standby mode.
Press (Guide) on your remote while the set-top box is in standby mode. OR press Channel Up + Channel Down simultaneously on the front panel of the set-top box.
Scroll to TV TYPE and choose the appropriate setting for the TV: 4:3 Letterbox, 4:3 PAN/SCAN or 16:9 widescreen
Scroll to HDMI/YPbPr OUTPUT and change it to either 480p std, 480i std, Pass Thru or 1080i
Scroll to 4:3 OVERRIDE and select 480p -
Photoshop elements 11 toolbar does not fit on my screen
I'm trying to use Photoshop elements 11 on my notebook computer, but the toolbar is too big to fit on the screen, and some of the icons are not accessible. Is there any way to reduce the size or shape of the toolbar, or to scroll to the icons I can't see using the keyboard so I can still access them. My computer is already set to the highest screen resolution. Thanks for your help.
I'm having the same problem, but on a laptop. PSE11 has been really badly laid out by the designers: I suspect they've been designing on their own large screens where there is plenty of screen area and completely forgotten the "portable" side of the market. IMO the toolbar on the left, dialogue box at the bottom and menu bars take up far too much real estate. I have a 15.6" widescreen laptop and the window for the image is unacceptably small. The "Quick/ Guided/ Expert" bar is ridulously large, and annoyingly mostly unpopulated which renders it pretty pointless!
So as much as I want PSE11, I won't be buying it. Sorry Adobe, but dumbing down this software and poor screen layout has lost you a sale (and PS is too expensive, so I won't be buying that either). I liked PSE10. I downloaded a copy a week before PSE11 came out. Unfortunately I missed out on being able to buy PSE10 as it was too late by the time I decided to buy it.
Oh well, let's see what happens with PSE12- that's out in about a year's time isn't it? -
i can no longer shoot directly into phaseone software - neihter version 6 or 7 - since i use my new macbook pro with retina display. pictures are not transfered from the camera into captureone. anyone else with this problem? any solutions?
My eyes just glazed over...Please in the future break down each of your issues with paragraphs separated by two carriage returns. It would be much easier when trying to address your issues.
Go to Apple menu -> System Preferences -> Keyboard and Mouse -> Mouse
And edit your mouse settings to do what you want it to do.
Secondly, this is not the place to vent. If you have a complaint, there is:
http://www.apple.com/feedback/
or http://www.apple.com/contact/
We are just end users here helping other end users.
Third, from my understanding, it would appear you are concerned about the noise the hard drive makes when it falls asleep? Why not put your machine in screen saver mode instead? Apple menu -> System Preferences -> Energy Saver turn off all Energy Saver settings, or set them to run Never.
Fourth, if your machine was purchased just a few days ago, you may still be able to get an exchange from the store, quicker than you can get a repair done. You may want to look into that possibility.
Fifth, it does appear you found the Logic forum. I would persist in asking there how to solve your technical issue with Logic regarding the audio. It may be you don't have to do anything special to the hard drive. Remember audio can be transmitted by wire, avoiding ambient sounds.
Good luck! -
How can I resize a JFrame ,to fit into the screen size
I have a Jframe which has JPanel and JPanel contains lot of other components.JPanel size is 980,1400. when i use JFrame.show method jpanel goes beyond the screen size in length and I am not able to see the portion below the screen.How can I resize the JFrame so that JFrame and JPanel shrinks to fit into the screen size.I need this because I have a PRINT button at bottom of the JPanel.Thanks.
Thank you for your reply.I tried with the following code as you have told.But the frame is still going beyond the screen.Can you please look into it and tell me whats wrong ?
//public class PlayerRegForm extends javax.swing.JFrame implements Printable
public static void main(String args[]) {
PlayerRegForm prf = new PlayerRegForm();
Dimension screenSize = Toolkit.getDefaultToolkit().getScreenSize();
Dimension frameSize = prf.getSize();
if (frameSize.height > screenSize.height)
frameSize.height = screenSize.height;
if (frameSize.width > screenSize.width)
frameSize.width = screenSize.width;
System.out.println("Screen Size ----------------- " + screenSize);
System.out.println(" Frame Size ----------------- " + frameSize);
prf.setSize(frameSize.width, frameSize.height);
prf.pack();
prf.show();
=============================================================================
Screen Size ----------------- java.awt.Dimension[width=1024,height=768]
Frame Size ----------------- java.awt.Dimension[width=112,height=28] -
I have the new ipad and when I stretch the screen a horizontal line appears when I scroll whatever page or location I am on. The line is not there if the screen is minimised. Any solutions?
I can't personally as I never really liked nor used the picture frame feature in iPad. Just search in the App Store and read customer reviews and you'll likely find something you'll like.
-
To whom it may concern
Hi my name is Silvana Pires,I purchased an I Phone 4 S Model A 1387 EMC 2430 SCC.ID DCG E
2430 AIC.579 C-E 243 A in California one year ago,Unfortunately its Not working well the screen is getting black,and the phone is in good shape I can prove it,the Apple support in Brazil doenst work like in USA.
I look forward to your reply and a resolution of this problem.
Thank you very much!!!You are welcome. I'm glad you got it back up.
(1) You say you did the symbolic link. I will assume this is set correctly; it's very important that it is.
(2) I don't know what you mean by "Been feeding the [email protected] for several weeks now, 700 emails each day at least." After the initial training period, SpamAssassin doesn't learn from mail it has already processed correctly. At this point, you only need to teach SpamAssassin when it is wrong. [email protected] should only be getting spam that is being passed as clean. Likewise, [email protected] should only be getting legitimate mail that is being flagged as junk. You are redirecting mail to both [email protected] and [email protected] ... right? SpamAssassin needs both.
(3) Next, as I said before, you need to implement those "Frontline spam defense for Mac OS X Server." Once you have that done and issue "postfix reload" you can look at your SMTP log in Server Admin and watch as Postfix blocks one piece of junk mail after another. It's kind of cool.
(4) Add some SARE rules:
Visit http://www.rulesemporium.com/rules.htm and download the following rules:
70sareadult.cf
70saregenlsubj0.cf
70sareheader0.cf
70sarehtml0.cf
70sareobfu0.cf
70sareoem.cf
70sarespoof.cf
70sarestocks.cf
70sareunsub.cf
72sare_redirectpost
Visit http://www.rulesemporium.com/other-rules.htm and download the following rules:
backhair.cf
bogus-virus-warnings.cf
chickenpox.cf
weeds.cf
Copy these rules to /etc/mail/spamassassin/
Then stop and restart mail services.
There are other things you can do, and you'll find differing opinions about such things. In general, I think implementing the "Frontline spam defense for Mac OS X Server" and adding the SARE rules will help a lot. Good luck! -
Field VIQMSM-MATXT(14) does not exist in the screen SAPLIQS0 7204
Hi experts,
I have a BDC calls QM02 Tcode in a custom report as follow:
PERFORM bdc_dynpro USING 'SAPLIQS0' '7204'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=REAK'.
PERFORM bdc_field USING 'BDC_CURSOR'
'VIQMEL-QMNUM'.
CLEAR txline.
CONCATENATE 'VIQMSM-MATXT(' lnindex ')' INTO txline.
" txline = VIQMSM-MATXT(0014)
CONCATENATE 'PO #: ' alv_qmel-ponum INTO matxt SEPARATED BY space.
PERFORM bdc_field USING txline
matxt.
PERFORM bdc_transaction USING 'QM02'.
When debugging I found that the input bdcdata table contains a field VIQMSM-MATXT(14) in screen SAPLIQS0 7204.
Number 14 is the number of task of the notification which was not marked as deleted.
This field caused the error: Field VIQMSM-MATXT(14) does not exist in the screen SAPLIQS0 7204 after that.
I would like to know what does VIQMSM-MATXT(14) mean? How BDC can transfer VIQMSM-MATXT(14) to QM02? And How does it work?
Thanks,
KhanhHi Kostek,
I did not have the solution for this exact problem because our FA canceled this bug.
Check your test case carefully whether the screen of the TCode called by BDC has that field OR NOT. If that screen does not have that field in your special case, just ignore it.
Regards,
Khanh -
I just purchased Export PDF, and when I use it, it opens them in WordPad (which I never use) instead of Word. Thus, the pictures are not there, and the fonts are changed. How do I get them imported into Word?
Hi,
I checked your account,your Export PDF subscription is in 'Pending' status.
Once it gets confirmed you will be able to use it.
Please let us know if you require further assistance.
Regards,
Florence -
I use Firefox v10.0.2 as default browser on Dell XPS8300 e/w Intel Core i5 & Windows 7 Ultimate and Compaq Presario CQ57 e/w Intel Core i3 & Windows 7 Home. More frequently on the (about 90% of attempts) than the Dell (50% of attempts) Firefox will not display to the screen when I click on icon. When it happens I cannot display other programs. I specifically say display because I believe Firefox has started. To circumvent the problem I installed Process Explorer on both machines and start this program first then click on Firefox icon. When problem occurs I can see Firefox.exe process in Process list; some CPU consumed but, then, no CPU activity. If I click on Firefox icon again another process opens in Process list but with same response - some CPU consumed and then no CPU activity. If I have 2 processes running and kill the 1st process, the 2nd will display and everything from then on is normal. If I do not open a 2nd process but kill the 1st process then click on Firefox icon Firefox is displayed and everything from then on is normal. This problem has occurred since original installation on both new machines. I've updated video drivers in both machines.
Ok, let's see if we can fix this and get it working for you!
First, if you start Firefox in [[safe mode|safe mode]] (restart your computer first, then when you open Firefox, hold down the shift key) does it start up more reliably? This is usually caused by a faulty add-on. If it does help, then restart Firefox, go into the Firefox button, then add-ons, and disable your extensions one by one until you find the trouble maker.
Also, try updating to Firefox 11, it has several bug fixes that might make life easier here.
Just as a few basic troubleshooting steps to make sure we have all the bases covered,
Run all Windows Updates, install all needed service packs, etc.
Update all your plugins (Flash, Java, etc.): [http://www.mozilla.org/plugincheck/ http://www.mozilla.org/plugincheck/].
Download and Install MalwareBytes Anti-Malware, run a full Scan. [http://www.malwarebytes.org/ http://www.malwarebytes.org/]. This helps check that there are no viruses on your computer causing issues. you can uninstall this program after you clean off any infections.
Maybe you are looking for
-
Hotspot access violation running Eclipse JBoss IDE 1.6.0 & 2.0.0 on Win XP
I have the following error when I try to open the Eclipse JBoss IDE versions 1.6.0 and 2.0.0 Beta. I tryed with jdk 1.5.0_06 and 1.5.0_12. Please, help me. # An unexpected error has been detected by HotSpot Virtual Machine: # EXCEPTION_ACCESS_VIOLATI
-
What controls the space above 'maincontent' in CSS layout with header?
In a freshly-downloaded CSS page layout with header (twoColHybLtHdr or similar), there is a space of about 20px between the bottom of the header box and the top of the maincontent box. Because of this space, when a bottom border is added to the hea
-
I have a macbook 2007 how can i get lepoard ?
ok i have a macbook i bought it in late 2007. I have a iphone 5 and i need the newest operating system what is the process i need to go through?
-
I changed my visited link colors to red-visited,green-not visited.but now have lost the search button in Amazon.The button is not showing up,But does work if I click on the area where it used to be.
-
Easing in and out on the same tween
I have a motion tween that I want to ease on both the beginning and end of the motion. As far as I can tell I can only set one value for easing and in the easing graph I can't add more points. The only way I've been able to have both ease in and out