My problem when I enable SSL in Weblogic and I don't have a trusted CA cert

<h3>Hello
I've enabled weblogic SSL
Now when I want use Weblogic Administration Console with Https protocol it works
But at first when I enter to its addredd my Web Browser(Mozella Firefox) show me this exception </h3>
"+This Connection is Untrusted You have asked Firefox to connect+
+securely to localhost:7002, but we can't confirm that your connection is secure.+
+Normally, when you try to connect securely,+
+sites will present trusted identification to prove that you are+
+going to the right place. However, this site's identity can't be verified+."
<h3>
I know that it's because I don't have any certificate of trusted certificate authorities (however when I add the exception it goes to the administration console)
Suppose I want develop an application for a small company and it uses HTTPS for its loging page and I don't have
any trusted CA certificate , when users want login , web brwoser shows the exception
</h3>
<h3>
Know I want ask
can I create a valid certificate by myself without connecting a trusted certificate authority and doing its official stages ? In other word , can I
be a Trusted Certificate Authority for myself and configure Web Browser for getting rid of that exception ?
My aim is to finding a way to use SSL and make a secure connection without receiving the exception in Web Browser and without
connecting certificate authorities and doing its official corresponding and paying cost
do you have any solution for me ?
Thanks
</h3>

Hi
I enabled SSL Debugging in Weblogic and it show me this log when the WebBrowser want user https :
<Jan 4, 2012 4:18:48 PM IRST> <Debug> <SecuritySSL> <BEA-000000> <Filtering JSSE SSLSocket>
<Jan 4, 2012 4:18:48 PM IRST> <Debug> <SecuritySSL> <BEA-000000> <SSLIOContextTable.addContext(ctx): 1639942021>
<Jan 4, 2012 4:18:48 PM IRST> <Debug> <SecuritySSL> <BEA-000000> <SSLSocket will be Muxing>
<Jan 4, 2012 4:18:48 PM IRST> <Debug> <SecuritySSL> <BEA-000000> <isMuxerActivated: false>
<Jan 4, 2012 4:18:48 PM IRST> <Debug> <SecuritySSL> <BEA-000000> <181142934 SSL3/TLS MAC>
<Jan 4, 2012 4:18:48 PM IRST> <Debug> <SecuritySSL> <BEA-000000> <181142934 received HANDSHAKE>
<Jan 4, 2012 4:18:48 PM IRST> <Debug> <SecuritySSL> <BEA-000000> <HANDSHAKEMESSAGE: ClientHello>
<Jan 4, 2012 4:18:48 PM IRST> <Debug> <SecuritySSL> <BEA-000000> <write HANDSHAKE, offset = 0, length = 58>
<Jan 4, 2012 4:18:48 PM IRST> <Debug> <SecuritySSL> <BEA-000000> <write HANDSHAKE, offset = 0, length = 1583>
<Jan 4, 2012 4:18:48 PM IRST> <Debug> <SecuritySSL> <BEA-000000> <write HANDSHAKE, offset = 0, length = 4>
<Jan 4, 2012 4:18:48 PM IRST> <Debug> <SecuritySSL> <BEA-000000> <isMuxerActivated: false>
<Jan 4, 2012 4:18:48 PM IRST> <Debug> <SecuritySSL> <BEA-000000> <181142934 SSL3/TLS MAC>
<Jan 4, 2012 4:18:48 PM IRST> <Debug> <SecuritySSL> <BEA-000000> <181142934 received ALERT>
<Jan 4, 2012 4:18:48 PM IRST> <Debug> <SecuritySSL> <BEA-000000> <NEW ALERT with Severity: FATAL, Type: 42
java.lang.Exception: New alert stack
at com.certicom.tls.record.alert.Alert.<init>(Unknown Source)
at com.certicom.tls.record.alert.AlertHandler.handleAlertMessages(Unknown Source)
at com.certicom.tls.record.MessageInterpreter.interpretContent(Unknown Source)
at com.certicom.tls.record.MessageInterpreter.decryptMessage(Unknown Source)
at com.certicom.tls.record.ReadHandler.processRecord(Unknown Source)
at com.certicom.tls.record.ReadHandler.readRecord(Unknown Source)
at com.certicom.tls.record.ReadHandler.readUntilHandshakeComplete(Unknown Source)
at com.certicom.tls.interfaceimpl.TLSConnectionImpl.completeHandshake(Unknown Source)
at javax.net.ssl.impl.SSLSocketImpl.startHandshake(Unknown Source)
at weblogic.server.channels.DynamicSSLListenThread$1.run(DynamicSSLListenThread.java:130)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
<Jan 4, 2012 4:18:48 PM IRST> <Debug> <SecuritySSL> <BEA-000000> <Alert received from peer, notifying peer we received it: com.certicom.tls.record.alert.Alert@47204d1a>
<Jan 4, 2012 4:18:48 PM IRST> <Warning> <Security> <BEA-090482> <BAD_CERTIFICATE alert was received from 172.17.33.59 - 172.17.33.59. Check the peer to determine why it rejected the certificate chain (trusted CA configuration, hostname verification). SSL debug tracing may be required to determine the exact reason the certificate was rejected.>
<Jan 4, 2012 4:18:48 PM IRST> <Debug> <SecuritySSL> <BEA-000000> <close(): 424502001>
<Jan 4, 2012 4:18:48 PM IRST> <Debug> <SecuritySSL> <BEA-000000> <close(): 424502001>
<Jan 4, 2012 4:18:48 PM IRST> <Debug> <SecuritySSL> <BEA-000000> <SSLIOContextTable.removeContext(ctx): 1639942021>
Can it give helpful glue ?
Thanks

Similar Messages

Hi, I got a big problem. I restored my mac and after I erased everything and started to restall the system, it showed I need to give the apple ID that was purchased the lion. The problem is that I lost my CD, and I don't have an ID with lion purchased

Hi, I got a big problem. I restored my macbook pro and after I erased everything and started to restall the system, it showed I need to give the apple ID that was purchased the lion. The problem is that I lost my installing CD, and I don't have an ID with lion purchased, so what should I do? Do you sell the system software?

This is a user forum; we're not  Apple.
Please contact the Apple Support folks directly for issues related to hardware and software purchases.
The particular model of MacBook Pro is a key detail here, as the Mac model will determine the oldest version it can boot, as well as whether it'll boot more current software.
AFAIK there is and was no Lion installer DVD available. It was a download. AFAIK, the last DVDs commonly available were for Snow Leopard 10.6. Snow Leopard DVDs are still available in the Apple online store in various countries, if your MacBook Pro is old enough to be able to boot that version.
If your MacBook Pro purchase with Lion wasn't registered with Apple, then you'll have to discuss this directly with the Apple Support folks, or repurchase Lion from the Mac App Store (which will usually involve a call to Apple for a redemption code as it's old software), or you'll "purchase" (it's free) Mavericks OS X 10.9 and wipe and install that assuming your MacBook Pro supports Mavericks. If you didn't purchase the MacBook Pro from Apple (and it was shipped with an older release), then you'll end up acquiring a redemption code from Apple for Lion, or installing Mavericks.
For completeness and given you're probably already aware of this, the usual approach for restoration with recent OS X versions is via the recovery boot (more details). If the disk is wiped and you can't get Lion, then you'll probably end up reinstalling with Target Disk Mode using another Mac with a compatible FireWire or Thunderbolt port and a cable. Or visit the local Apple Store.
sputniki: Once OS X 10.7 or 10.9 has been reinstalled, yes, getting Time Machine configured and going is undoubtedly on the agenda. But had there been a viable backup here, I expect jianghua would have used it.

Problem when I tried to change weblogic listen port from 7001 to 80

HI! I have problem when I tried to change weblogic listen port from 7001 to 80. When I changed from 7001 to 7777 then all works ok! But why not on 80? With apache all works ok on 80 too.
I restart my weblogic server and then I have following errors.
<2009.1.4 16:02:13 EEST> <Notice> <WebLogicServer> <BEA-000365> <Server state ch
anged to STARTING>
2009.1.4 16:02:14 oracle.as.jmx.framework.PortableMBeanFactory setJMXFrameworkPr
oviderClass
INFO: JMX Portable Framework initialized with platform SPI "class oracle.as.jmx.
framework.wls.spi.JMXFrameworkProviderImpl"
2009.1.4 16:02:15 oracle.adf.share.config.ADFConfigFactory cleanUpApplicationSta
te
INFO: Cleaning up application state
<2009.1.4 16:02:22 EEST> <Notice> <Log Management> <BEA-170027> <The Server has
established connection with the Domain level Diagnostic Service successfully.>
<2009.1.4 16:02:22 EEST> <Notice> <WebLogicServer> <BEA-000365> <Server state ch
anged to ADMIN>
<2009.1.4 16:02:22 EEST> <Notice> <WebLogicServer> <BEA-000365> <Server state ch
anged to RESUMING>
<2009.1.4 16:02:22 EEST> <Emergency> <Security> <BEA-090087> <Server failed to b
ind to the configured Admin port. The port may already be used by another proces
s.>
<2009.1.4 16:02:22 EEST> <Error> <Server> <BEA-002606> <Unable to create a serve
r socket for listening on channel "Default". The address 85.254.224.235 might be
incorrect or another process is using port 80: java.net.BindException: Address
already in use: JVM_Bind.>
<2009.1.4 16:02:22 EEST> <Critical> <WebLogicServer> <BEA-000362> <Server failed
. Reason: Server failed to bind to any usable port. See preceeding log message f
or details.>
<2009.1.4 16:02:22 EEST> <Error> <Server> <BEA-002606> <Unable to create a serve
r socket for listening on channel "Default[2]". The address 127.0.0.1 might be i
ncorrect or another process is using port 80: java.net.BindException: Address al
ready in use: JVM_Bind.>
<2009.1.4 16:02:22 EEST> <Error> <Server> <BEA-002606> <Unable to create a serve
r socket for listening on channel "Default[1]". The address 192.168.0.102 might
be incorrect or another process is using port 80: java.net.BindException: Addres
s already in use: JVM_Bind.>
<2009.1.4 16:02:22 EEST> <Notice> <WebLogicServer> <BEA-000365> <Server state ch
anged to FAILED>
<2009.1.4 16:02:22 EEST> <Error> <WebLogicServer> <BEA-000383> <A critical servi
ce failed. The server will shut itself down>
<2009.1.4 16:02:22 EEST> <Notice> <WebLogicServer> <BEA-000365> <Server state ch
anged to FORCE_SHUTTING_DOWN>
2009.1.4 16:02:22 oracle.adf.share.config.ADFConfigFactory cleanUpApplicationSta
te
INFO: Cleaning up application state
2009.1.4 16:02:22 oracle.adf.share.config.ADFConfigFactory cleanUpApplicationSta
te
INFO: Cleaning up application state
Best regards!

Debuger,
It does not matter which WLS version I am using (although I'm using 10.3, the one that comes with JDev 11g).
The problem is that SOME OTHER PROCESS on your machine is listening on port 80. Guess you need to go to the Microsoft forums to find out how you can tell what that OTHER, NOT WLS process is.
John

Enabling ssl on Weblogic server 5.1 using Verisign certificate.

"Hi,I am trying to enable ssl in Weblogic server 5.1The properties set in my properties file areweblogic.security.certificate.server=servercert.pem(sent from the verisign via email)weblogic.security.key.server=cp8212-2d2-key.der(generated by the Certificate Servlet of Weblogic Server)

"Hi,I am trying to enable ssl in Weblogic server 5.1The properties set in my properties file areweblogic.security.certificate.server=servercert.pem(sent from the verisign via email)weblogic.security.key.server=cp8212-2d2-key.der(generated by the Certificate Servlet of Weblogic Server)

Error messagCannot connect Secure connection needed enable ssl 3.0 and slt

Error message "We cannot complete your itunes request. A secure internet connection cannot be determined. Be sure to enable ssl 3.0 or slt 1.0 in the internet options control panel. I did NOTHING different to my computer. One day I could purchase songs from itunes and 4 days later I couldn't. I've checked all things that discussion boards and technical support have suggested and nothing works. Enabled ssl 3.0 and slt 1.0, turned off firewall, authorized my computer, blah, blah...
Not only can't I purchase songs but when I plug in my ipod to shuffle or change playlists, the error messages tell me I will lose many of my songs if I don't authorize my account. Then, back to the problem of it looping me through error messages.

You don't really need to do anything, as the handshake will fall back to SSLv3 if either end can't speak TLS.
However if you want to enforce SSLv3 and nothing else (e.g. SSLv2) you could remove TLSv1 from the enabledProtocols of the SSLSocket (or SSLServerSocket if you're writing a server). You should also remove SSLv2 at the same time IMHO as it is insecure.
Alternatively, if you're using SSLContexts, do SSLContext.getInstance("SSLv3") and get your SSLSocketFactory from the result; see http://java.sun.com/j2se/1.4.1/docs/guide/security/jsse/JSSERefGuide.html#AppA.
EJP

HT201363 hi, I don't remember the answers for my security questions and I don't have "send an email to your rescue email address to reset your security questions and answers" when I select "Password and security" on my apple ID. What should I do?

hi, I don't remember the answers for my security questions and I don't have "send an email to your rescue email address to reset your security questions and answers" when I select "Password and security" on my apple ID. What should I do?

Hi Roy,
Contact iTunes support:
https://getsupport.apple.com/GetproductgroupList.action
Select your country, complete the prompts.
Or you can contact them by email:
https://ssl.apple.com/emea/support/itunes/contact.html
They usually will get back to you via your regular email within 24 hours.
Cheers,
GB

HT4623 When I bought my iPhone 4s, a friend activated it for me using his email. Later I changed it to my own email on iPhone website (iCloud A/C). But when I try to update, I found it still shown my friend's email and I don't have his password. What can

When I bought my iPhone 4s, a friend activated it for me using his email. Later I changed it to my own email on iPhone website (iCloud A/C). But when I try to update, I found it still shown my friend's email and I don't have his password. What can I do?

In addition to what FelipeV is telling you, I advise you to contact your friend and have him remove the iPhone from his apple id through icloud.com. Otherwise, if in the future you want to update the iOS or restore the iPhone for troubleshooting a problem, you may find that you cannot activate it again due to the feature Activiation Lock in iOS 7.
Once your friend has done this, you should deactivate Find my iPhone on your iPhone iCloud settings and then activate it back with your own Apple ID.

My 16gb iPhone 4S keep tell me that my storage is almost full and I don't have enough space for any upgrades. I don't have any music or videos on my phone. I deleted all old emails, texts, contacts and apps but still nothing. When I check my settings, I n

My 16gb iPhone 4S keep tell me that my storage is almost full and I don't have enough space for any upgrades. I don't have any music or videos on my phone. I deleted all old emails, texts, contacts and apps but still nothing. When I check my settings, I noticed that my Instagram is at 732mb and it keeps rising. Now it's at 814mb. Please help!!!!!

What is the precise wording of the message that is occurring?
Are you attempting to update via iTunes on a computer or over the air on the device?
How much free space is actually on the device?
If updating via iTunes on the computer, how much free space on the computer?

I can't rent movies now, because I'm getting a message that I need to "go to the itunes store on my computer and verify my payment information. But it is all correct and I don't have any problems buying anything else but movies on Apple TV? What can I do?

Apple can't seem to help me with this verification of payment information message that I'm getting when I try to rent a movie. My payment information is correct, and they don't have any issues billing me for anything else. What can I do?

That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

HT4623 When I try to update IOS 6 to my I Phone using my computer, it keeps saying This version of iTunes (10.6.1) is the current version. It won't let me update and I don't have wi fi

When I try to update IOS 6 to my I Phone using my computer, it keeps saying This version of iTunes (10.6.1) is the current version. It won't let me update and I don't have wi fi

It seems that you try to update iTunes rather than your phone. To update your phone, connect it to your computer, and on the page of your phone in iTunes, you should have a button "check for updates" or something similar.
More info here: http://support.apple.com/kb/HT4623

TS3716 I have an iPod nano (3rd generation). I've recently dowloaded iCloud. So now when I open iTunes the window is entirely different. And I don't have the previous menu options. I have downloaded audiobooks for years. Is it not supported by iOS5?

I have an iPod nano (3rd generation). I've recently dowloaded iCloud. So now when I open iTunes the window is entirely different. And I don't have the previous menu options. I have downloaded audiobooks for years. Is it not supported by iOS5?
Can I revert back to a previous version? Or must I upgrade to a newer device? Thank you for you expertise!!

I have an iPod nano (3rd generation). I've recently dowloaded iCloud. So now when I open iTunes the window is entirely different. And I don't have the previous menu options. I have downloaded audiobooks for years. Is it not supported by iOS5?
Can I revert back to a previous version? Or must I upgrade to a newer device? Thank you for you expertise!!

I want to go back to the previous 2014.2 version. .3 is much too buggy and full of error messages. Creating problems as I am on a timeline with my client and I don't have time to fool around with all the problems.

2014 .3 is much too buggy and full of error messages. Creating problems as I am on a timeline with my client and I don't have time to fool around with all the problems.

You didn't mention what error(s) you've encountered? A workaround for the most commonly hit problem is here Re: error in Muse : Object UID:U6875 has two (or more) owners: U3633 and U3165
If you have a copy of your .muse file that has not been saved using 2014.3, you can downgrade by uninstalling Muse and then choose Previous Version in the Filters drop down in the Apps panel of the Creative Cloud desktop app. There will be a popup next to Muse where you can select a prior version to install.

I recently upgraded to Mavericks and now don't have access to iphoto. I cannot find my iphoto library to back the photos up before upgrading the iphoto but see the photos when I try to change screensaver? Where are my photos so I can back them up?

I recently upgraded to Mavericks and now don't have access to iphoto. I cannot find my iphoto library to back the photos up before upgrading the iphoto but see the photos when I try to change screensaver? Where are my photos so I can back them up?

The iPhoto library should be in your user folder/Pictures unless it was moved.

What do I have to do in creating a Keynote presentation on my MAC so that when I send it to my iPad, I don't have to re-do the presentation all over again as the fonts have changed, sizing has changed and everything is basically a mess?

What do I have to do in creating a Keynote presentation on my MAC so that when I send it to my iPad, I don't have to re-do the presentation all over again as the fonts have changed, sizing has changed and everything is basically a mess?
I have downloaded many of my previous Keynote presentation into my new ipad mini and not ONE has opened properly
Rather defeats the purpose of icloud, synching, Keynote on IOS etc doesn't it?
Any tips anyone?
Cheers
Philip

Thanks for this Gary. Much appreciated. Will help with future ones.
Still a bit like using keynote in 'safe mode' and very limiting.
If anyone produces an 'auto convert' app that will save me the work of fixing existing presentations slide by slide, I'm buying it :-)
Thanks again

I have a recently acquired iPhone 4. Is it true if I am using PhotoStream to upload photos to my PC via iCloud, photos are only pushed when wifi is available? This means I don't have to worry about extra data usage, right? Thank you.

I have a recently acquired an iPhone 4. Is it true if I am using PhotoStream to upload photos to my PC via iCloud, photos are only pushed when wifi is available? This means I don't have to worry about extra data usage, right?
Thank you.

Correct.
On an iOS device, new photos you take will be automatically uploaded to your photo stream when you leave the Camera app and are connected to Wi-Fi. Note: My Photo Stream does not push photos over cellular connections.

My problem when I enable SSL in Weblogic and I don't have a trusted CA cert

Similar Messages

Maybe you are looking for