My Program need support SESSION with web server, How to do it???

My Program is a client program, but at server side will use Session to manage some data when client start communication with itself.
I only known the web explorer (eg: IE) support the SESSION and COOKIES, HOW TO REALIZE IT ?

According to the following link http://www.cisco.com/univercd/cc/td/doc/product/lan/cat4000/12_1_12/ol_2170.htm#xtocid9 this version of IOS for the 4006 will support MPLS.

Similar Messages

Need help regarding to Web server

Hello, I need some help about web server. I'm really really bad when it comes into server because I dont have any experience about this. I'm actually developing project under university, where I have to create a website for them. Since they have just bought a new server, they want me to install and configure the server to assure I can run my program on it, which means I have to make it as a web server. I dont have any idea how to configure it, what I need and so on. Furthermore, how can I configure dreamweaver to make sure that our website can be uploaded into Internet later?

I think you may be in for a bit of hard work and possible complications if you have no idea on how to set up a server. It would be more realistic, especially for security purposes for an IT person who is knowledgeable in servers to set it up for the university - seriously!
Anyways, I suppose it all depends on the type of server, is it a windows based server or will it be linux??
I did a google search for 'configuring a server' and came up with these links:
http://www.google.com.au/search?q=configuring+a+server&ie=utf-8&oe=utf-8&aq=t&rls=org.mozi lla:en-GB:official&client=firefox-a
As you can see, lots of information, but it depends on the type of server.
Once the server is set up, you would have information on how to upload the site to the server (same as any webhost) and you use those details to enter into the Remote site window.
I'm afraid I'm not familar with setting up servers, so that's the best help I can offer :-)
Nadia
Adobe® Community Expert : Dreamweaver
Unique CSS Templates |Tutorials |SEO Articles
http://www.DreamweaverResources.com
Book: Ultimate CSS Reference
http://www.sitepoint.com/launch/005dfd4/3/133
http://twitter.com/nadiap

DLL in "\Program Files\...\Web Server Extensions\15\BIN\" folder

Hi!
Anyone, please, tell me
1. Why some assembly are in this folder - "\Program Files\...\Web Server Extensions\15\BIN\"?
2. What kind of assembly must be there?
About year ago I have a problem with my custom solution, it can't found one of my dll, although it was in GAC. After I put it in BIN folder, it worked. Now I have a similar problem - I have dll in GAC, but page through error "assembly not found".
This error repeated through time, I can't understand why...

Hi
If your DLL are in bin folder of web application then your solution is sandbox solution and if its in GAC then its Farm solution.
so if you deployee any custom solution as sandbox then your DLL should be in BIN folder of web application
Check below link which can help to more understanding about dll deployment
http://www.learningsharepoint.com/2013/03/24/deploy-sharepoint-2010-solutions-in-sharepoint-2013/
please let me know if u get your answer then mark me as Answer and Vote

Error occured while communicating with web server

In Netweaver if you receive this error " error occured while communicating with web server "
check your script logic file if you have mande any change to dimension
names
Vinoo

Hi,
validate below note
Note 1330145 - an error occured while communicating with the web server
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/b161a590-0201-0010-5590-91fa5076a914
regards
nag

Sun Portal Server 6 compatibility with Web Server 6.1 SP - 8

Hi,
Our client is running on Sun One Portal Server Version 6.0, which is deployed on Sun One Web Server ver 6.0, there is a request from the hosting provider to upgrade the web container to Web Server 6.1 SP8. My question is � Is Sun One Portal 6.0 (with AM 5.1 and DS 5.1 SP4) capable of / compatible with Web Server 6.1 SP - 8 ?
Do you see any issues with going ahead with the upgrade?
Thanks much for all your responses!

We upgraded our Sun Webserver to SP8 and had no issues. We are running
- Portal 6.2
- IS 6.1
- DS 5.1

An Error Occurred While Communicating with Web Server

We are getting an error message ("An Error Occurred While Communicating with Web Server") when sending data from BPC Excel. Any one konws why it is coming.
We are using ASP.NET version 2.0.50727 in ISS Server

Hi,
This kind of error happens when EVDRE status is not Ok.
Even if EVDRE status is OK please make the relevant changes in expansion range--> MemberSet values.
Hope it helps
Raman
Edited by: Radharaman Singh Rajkumar on Jun 29, 2010 5:25 PM

I need explorer for certain web sites, how do I get it back for those?

I need explorer for certain web sites, how do I get it back for those? I had an icon in case I needed Explorer, but now Firefox comes up. How do I change that back?
Thank you!

You can launch Internet Explorer from its icon on the desktop, Start Menu or the Quick Launch section of the taskbar. If you've lost the shortcuts somehow, you can create one as follows:
# Right-click the desktop and choose New, then Shortcut.
# Click the Browse button and select the following file:
#* C:\Program Files\Internet Explorer\iexplore.exe
# Give the shortcut a name, like ''Internet Explorer'' then click the Finish button.

I just recovered my serial number for Acrobat 8 from a chat session with Adobe. How do I download Acrobat? Version 8? Version XI?

I just recovered my serial number for Acrobat 8 from a chat session with Adobe. How do I download Acrobat? Version 8? Version XI?

Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 12 | 11, 10 | 9,8,7
Lightroom: 5.6| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

Hi help needed to configure connector with web server 7

Hi
I m currently trying to configure web application with sun web server7.0 on solaris machine in 64 bit mode.
I compiled source with -m64 which generated 64 bit for me. And m using the generated library to configure by editin magnus.config.....
Same things are working in 32 bit..
I given below error generated please if u guyz know the issue rep me bak... thnx in advance
Sun Java System Web Server 7.0 B12/04/2006 11:14
failure: CORE2253: Error running Init function load-modules: dlopen of /home/cfqauser/jrun/lib/wsconfig/1/libjrun_nsapi.so failed (ld.so.1: webservd: fatal: libgcc_s.so.1: open failed: No such file or directory)
failure: server initialization failed
Error running "/opt/webserver7/https-cfauto05/bin/startserv": exit code was 1

looks like , the server is unable to find libgcc (or any of its dependent libraries in the path ) and hence unable to load.
now, you can address this in multiple ways
- export LD_LIBRARY_PATH to your 64-bit location of libgcc libraries
1.
for eg on solaris 10, you can do something like
export LD_LIBRARY_PATH=/usr/sfw/lib/sparcv9 (or amd64)
you will need to do this every time to start the server.
or
2. use Studio 11 to compile this NSAPI plugin.
this way, you don't have to worry about manually exporting LD_LIBRARY_PATH while starting the server.
pl. note that Sun Studio 11 is free and you can get it from
http://developers.sun.com/sunstudio/index.jsp
hope this helps

Need help setting up web server with WRT54GS

Hello,
I am trying to set up a web server with my linksys router. For the network settings, I have used 192.168.001.150 as my primary IP (192.168.1.150, all 3 numerical characters have to be filled in), 255.255.255.000 as my primary netmask and 192.168.001.001 (192.168.1.1) as my gateway. I have gone into my router and then enabled port fowarding for port 80 to 192.168.1.150 but I still cannot access my web server. What could be the problem?
Any help would be greatly appreciated. I'm trying to set up this server so I can test scripts and things.

bump

Publishing front panels with web server

Hello,
I'm working with LabView 7.1 and trying to publish a front panel by means of the web server.
The problem is that I'm only able to connect to the VI through the internet when both , the host and the remote are networked.
When I try with computers outside that network the browser doesn't find the webpage.
Thank you for your help
Lian

You need to know:
The public IP of your router.
The private IP of your LabVIEW server.
The port used by your server.
First you need to forward the port on your router. Basically, you need to tell the router that incoming NEW connections to a certain port of the public IP of the router should get forwarded your server. (Without forwarding, the router only works for outgoing connections). Once the port is forwarded, clients located on the outside need to connect to the public IP of your router.
Possible complications:
Your ISP might block certain incoming ports for security reasons. In this case you can configure a different port for the server.
With some routers you will not be able to connect to your server (for testing) with a client located on the same LAN via the public IP of the router. Only routers that incorporate a loopback proxy support this. What is the brand and model of your router?
Good luck!
LabVIEW Champion . Do more with less code and in less time .

Can Acrobat 9 pro be installed to XP with web server(IIS) without any license issue?

It seems not to permit to install into window server, but how about the window XP had web server installed?

Thanks for your reply. As I mentioned in my post, when I went to Control Panel to uninstall Acrobat 11.0, it wasn't listed among currently installed apps. However, after going back and looking through the Installed On dates in Control Panel, I realized that for some reason, it's called Adobe PFD Creation Add-on XI, rather than Acrobat 11.0. Interestingly, the program folder name in Windows Explorer still uses Acrobat 11.0.
Fortunately for me, I always have disc versions of my software. So I was able to re-install Acrobat 9.0 once I got rid of Adobe PDF Creation Add-on XI. I really wish that Adobe made clearer what extras they are installing with these trial versions :-(
Thanks again.

Security issue with web server plug-in with Weblogic server

Hi,
I have a setup where I have an Microsoft IIS setup as the front facing web server and have the WLS IIS plug-in installed on it. At the backend, is two WLS11g managed servers in a cluster.
I have a JAX-WS client running on HPUX hitting the web service via IIS but I observe a very strange thing. When the service request is rather small, it could pass through IIS and the managed servers could pick up the call and reply correctly. However, when I have a bigger request call (larger payload), it will error out, citing "Unsupported Content-Type: text/html Supported ones are: [text/xml]".
I have also attempt to put in a TCP/IP Monitor between the client and IIS and it appears that regardless if the call gets through, it seems to consistently got hit with a HTTP error 401.2, follow by a 401.1, and then, the WSDL came back. I am pretty sure that the web services are not secured as I could get the WSDL without any authentication on the managed servers direct from my brower (it did pop the authentication window if I attempt to hit the web services via IIS)
Anyone has any idea what is going on, the issue seems to be so contradicting...
Thanks in advance.

When you look at this link http://www.microsoft.com/technet/prodtechnol/WindowsServer2003/Library/IIS/8feeaa51-c634-4de3-bfdc-e922d195a45e.mspx?mfr=true
You can check the authentication method that is configured for that node in the metabase.

System sound delay RDP session with Windows server 2012 R2 standard

I have the following problem during a RDP session with a Microsoft Terminal Server 2012 R2 standard:
when i produce a system sound, the delay could be up to 15 seconds before I hear the cound on the client side.
making immediately a second system sound, the delay is minimal,
When i wait about 10 minutes, the delay could be again 5-15 seconds.
This problem occurs both with Windows 7 and Motorola Scanners
I also noticed that after making a sound on the first device, there is also no delay when making immediately a sound on a second RPD session.
I tried different settings for audioqualitymode or audiocapturemode, no luck
henk

Hi Henk,
As the way I see it, it’s a poor performance behavior of RDP.
You may try to update sound driver and fully patch systems to see whether performance can be improved.
“RDP was originally designed to flush the video frame buffer to the client about once every 100 milliseconds. While this is fine for most Windows GDI applications, graphic intensive applications, 3D applications and applications requiring audio
/ video synchronization don’t fare so well. With respect to streaming media in particular, RDP is only meant to cache the bitmap files (compressed) not the audio which is uncompressed over the wire”, quoted from the article below:
Terminal Services and Graphically Intensive Applications
http://blogs.technet.com/b/askperf/archive/2009/04/17/terminal-services-and-graphically-intensive-applications.aspx
Best Regards,
Amy
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]

PHP with Web Server 6.0SP2

I've tried in vain to get PHP 4.1.2 to work with iPlanet Web Server 6.0SP2. Installation on Solaris 8 works fine but with iPlanet Web Server it just will not work.
I have consulted all relevant documents from php3.de as well as phpbuilder.com with no luck.
The "solution" posted on php3.de for Web server 6 - modifying the magnus.conf, obj.conf and mime.types simply does not work.
I need to get this working otherwise I will have no choice but to move to Apache/JBoss rather than iPlanet Web and App server which I dont want to do!
Thanks
Arv

To build PHP with NES or iPlanet web servers, enter the proper install directory for the --with-nsapi = DIR option. The default directory is usually /opt/netscape/suitespot/. Please also read /php-xxx-version/sapi/nsapi/nsapi-readme.txt.
Hope the following site will certainly help you in getting PHP to work with iPlanet Web Server.... (sure on 4.1x version, have no idea for 6.x vresion... Hope it also work since its a upgraded version :) )
here is the site....
http://www.php.net/manual/en/install.netscape-enterprise.php

My Program need support SESSION with web server, How to do it???

Similar Messages

Maybe you are looking for