My purchase games are not working after ISO 8 update

I recently updated my iPad 3rd gen I'm thinking, anyways, it has the iOS 8 update. When I open my game  app, it loads up for a second and closes right after. The game is up to date and PURCHASED. Along with many other games, so I am a bit mad. These games are relatively expensive and not for me, it's for my son, who is really upset because he thought I put him on time-out. I digress, anyways, how can this be resolved? My iPad is 16g does that matter? My games are backed onto my icloud. Thank you in advance!

try double tapping the home key and closing any app at the bottom that is in-memory.  then reset by holding the top button and home button until you get the apple logo (when the slider switch option appears to turn off the phone, ignore it and don't let go of the two buttons).
after it resets try one of your games.  this has cured all kinds of weirdness for me.

Similar Messages

  • Brightness Control Hotkeys are not working after windows 10 Update

    Hi Experts, I am Using HP Pavilion 15-NOO3TXRecently I Updated Windows 10 from Windows 8.1All Drivers are updated Sucessfully.I have Intel Graphics and AMD Radeon HD 8600both are also updated Sucessfully. but F2 and F3 hotkeys are not working for brightness adjustments.when i Unistall AMD Radeon drivers then hot keys are working properly(only with intel graphics)  Please Take a look for my Drivers But in Video Memory it showing only 128MB Dedicated Video Memory   I Installed AMD Drivers using autodetectutility.exe from AMD Website.how can install both AMD Radeon Drivers and brightness hotkey adjysutment. 

    Hi Erico,I tried your method It says The best driver software for your device is already installed I Used this tool http://www.techspot.com/drivers/driver/file/information/16748/and I cleaned up all display drivers.windows searched in updates for drivers and updated all video drivers.now brightness control key is workingbut when i checked dedicated video memory it says 128 MB.but my dedicated video memory in 1024 MB.Take a look for Video memory

  • Boot Camp on rMBP - Games are not working well. Drivers updated, any ideas?

    Windows 7 64-bit Drivers are updated, and OS is current (both in the Mac and Win sides).
    In Asassins Creed III, the resolution stays at the lowest setting. Any attempt to increase the resolution above the lowest setting (not just to the highest setting) results in a blinking screen and an eventual reset back to the original (low) resolution.
    In other games, the mouse appears to be "off" by about 100 pixels to the right. When I click on something, the cursor is not where the clicking happens.
    In still other games, the sound is off. Sound seems to be turned down, even though it's at its max in the game's settings. This only happens for some games.
    Any help is appreciated.

    Did you check Control Panel>Device Manager  ?
    Open up the DVD/CD-ROM Drives and see if your drive is even listed.
    If it is try updating the drivers.
    If not Run Action>Scan for Hardware Changes and see if Windows finds the Drive.

  • Internal speakers on my iPhone are not working after latest software update.

    I'm not able to listen to my calls (unless I use speaker phone) after updating to the latest iOS 8.3 software. Any input? - Thank you!

    Is the mute switch on?
    Basics from the manual are restart, reset, restore from backup, restore as new device.  Have these been tried?

  • Why the games are not working properly in my ipad after installing iOS7

    Why games are not working properly in my ipad in my iOS 7

    The games you mention would have been written and therefore designed for the previous version of iOS - you've most likely had a lot of updates lately in the run-up to the release of iOS 7 and if these games haven't had an update then chances are these will need to be adapted to iOS 7 by the developers if not working correctly.
    Regards,
    Steve

  • After updating my ipad through i tunes all my games are not opening, After updating my ipad through i tunes all my games are not opening

    After updating my ipad through i tunes all my games are not opening, After updating my ipad through i tunes all my games are not opening

    This seems to be most common with lower resolution pictures.  You can go into settings > general > accessibility and turn reduce motion motion off and then try to rescale.  Or user a higher resolution picture, which works better with the new OS.

  • The MSS ECM FPM Steps are not working after the upgrade

    Hi all,
    The MSS ECM FPM Steps are not working after the upgrade. We use Java Webdynpro and MSS ECM (SP17), version 603.
    On cliking the FPM steps, nothing is happening, however we can navigate using the buttons.
    But this functionality was working before the upgrade.
    Please let me know what should I do.
    Thanks,
    Sarayoodharan.K

    clinet provided in the backend system was not correct during SSO certificate using tx-code strustsso2 -  Cleint should be 000

  • Head phone volume controls are not working after updating to ios 6.1 y?

    head phone volume controls are not working after updating to ios 6.1 y?

    I have tried my head phone with other iphone still the same problem may be my head phones has been not working need to chek my iphone with other head phones which are working

  • My printers are not working after mavericks install. What can I do to fix - PLEASE HELP! It is my lifeline - we are a print shop!

    My printers are not working after mavericks install.
    The printer just PAUSE and can't be resumed.
    What can I do to fix - PLEASE HELP!
    It is my lifeline - we are a print shop!

    Go to the printer manufacture website and download the drivers for your printer model for OS X v10.9 Mavericks.
    Then open System Preferences > Printers & Scanners > Print
    Select your printer on the left then click -  (minus)
    Then click + (plus) to add the printer.

  • Airplay is not working after the latest update, whats wrong? Sound will not go to Apple TV or my Surround receiver

    Airplay is not working after the latest update, whats wrong? Sound will not go to Apple TV or my Surround receiver

    Hi Tokha,
    If you are having an issue with using AirPlay from your MacBook Air, I would suggest that you troubleshoot using the steps in this article - 
    iTunes: Troubleshooting AirPlay and AirPlay Mirroring - Apple Support
    Thanks for using Apple Support Communities.
    Best,
    Brett L 

  • HT201366 CAC readers not working after installing security update 2013-003?

    Is anyone else having problems with CAC readers not working after installing security update 2013-003? CAC required websites are causing safari and chrome to crash.

    For CAC issues, see:
    MilitaryCAC's Mac OS X support landing page
    Please follow these directions to delete the Mail "sandbox" folder.
    Back up all data.
    Triple-click the line below to select it:
    ~/Library/Containers/com.apple.mail
    Right-click or control-click the highlighted line and select
    Services ▹ Reveal
    from the contextual menu.* A Finder window should open with a folder named "com.apple.mail" selected. If it does, move the selected folder — not just its contents — to the Desktop. Leave the Finder window open for now.
    Quit and relaunch Mail, and test. If the problem is resolved, you may have to recreate some of your Mail settings. You can then delete the folder you moved and close the Finder window. If you still have the problem, quit Mail again and put the folder back where it was, overwriting the one that may have been created in its place. Post your results.
    Caution: If you change any of the contents of the sandbox, but leave the folder itself in place, Mail may crash or not launch at all. Deleting the whole sandbox will cause it to be rebuilt automatically.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard (command-C). In the Finder, select
    Go ▹ Go to Folder...
    from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.

  • My iPad2 is not working after an unsuccessful update to the new iOS6. How do I get working?

    My iPad2 is not working after an unsuccessful update to the new iOS6. How do I get working?

    - Try resetting the iPod. Nothing will be lost.
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Download/install a new app
    - Restore from backup
    - Restore to factory daults/new iPod.

  • Wifi not working after latest iOS update

    wif not working after latest iOS update 7.0.4.  Any suggestions?

    Same happening to my iphone no wifi or bluetooth since latest update tryed everything reset restore reset back to factory setting all to no avail phoned apple they want 155 pound for a replacement (cheeky #$%/$$#@) when everyone knows its there fault .i read phone may need new wifi chip if its out of warrenty cheaper to take to local phone doctor

  • HT4623 Anyone having trouble with App Store install and cloud store buttons not working after 6.1 update?

    Anyone having trouble with App Store install and cloud store buttons not working after 6.1 update? I go to install an app. I hit install and nothing happens. About a minute later it asks me for my password and then it does nothing. The install button goes back to saying install. However the app shows up in my installed list and in cloud but no app installed.

    OK - I found a helpful post - closed app store app and under Settings/General/Date and Time I reset the date and time by switching off "Set Automatically" and then switching it on again. Went back to App Store, launched it and Updatesseems to be working again.
    Go figure? Logical, No!

  • Alerts sounds are not working after upgrading to iOS 7.1.2

    Hi,
    I've noticed that all the alerts sounds are not working anymore after upgrading my iPhone 4S to iOS 7.1.2
    I’ve reviewed similar posts regarding the same issue; and it seems this is a common issue in iPhone 4S when upgrade to iOS 7.1.2.
    Apple, please Advise if there anything I can do to resolve the issue especially that my work deepens on the push emails and alerts that requires prompt response.

    I got this issue resolved.
    It caused due to some dirt in the charger slot; such dirt caused the phone to assume as if it is connected to a car kit and that is why it does not produce any sound except the Ringer and the Alarm.
    It has been fixed by cleaning the charger slot by toothbrush! with some
    drops of a cleaner.
    Do not do it by yourself, as it might be a risk; rather, let it to be done by an expert.

Maybe you are looking for

  • Some Previously Purchased iTunes Content Not Appearing in iCloud

    Greetings, I recently purchased an Apple TV (3rd Generation), and I began scrolling through my previous iTunes purchases under the TV Shows menu. I noticed that many of my older purchases do not show up. Most notably, I had purchased a season pass of

  • Information about international calls

    hello all  i have a problem  and i could not understand it  . the problem is that i have a number that  i would  like  to call it  but i'm not able  to get the  right call rate  for it  the number is   mobile number  which is begin  with 00972599  wh

  • IPhoto Organisation query

    Hi all I have an iMac with iPhoto version 9.5.1. on it. After downloading photos I am never sure if I should put them in Events, Albums or just leave under photos. Things get pretty messed up when I am editing or deleting photos as if you carry out t

  • OPC server error with Lookout 5.1 that was working with Lookout 4.5

    I was running a file on Lookout 4.5 with Field Point explorer 3.0 with field point objects. I recently upgraded the Lookout to 5.1 and Field Point Explorer was uninstalled. Now when I try to open my old Lookout file, I cannot control through the fiel

  • Yosemite and Canon MX310 scanner are incompatible

    I recently installed Yosemite OS on my Mini Mac (2011). Till then my Canon MX310 scanned and printed fine. Now it does not scan any longer and I get this message: Cannot communicate with scanner for these reasons: - Scanner is turned off. - USB cable