Yosemite and Canon MX310 scanner are incompatible

I recently installed Yosemite OS on my Mini Mac (2011). Till then my Canon MX310 scanned and printed fine. Now it does not scan any longer and I get this message:
Cannot communicate with scanner for these reasons:
- Scanner is turned off.
- USB cable is disconnected.
It prints fine, no problems.
I looked for a possible solution and found that the Canon site does not list version 10.10 for the MX310. Can I thus assume that my printer/scanner is now obsolete and not compatible with my computer. If this is the case I am seriously peeved that I downloaded Yosemite. This is not my only problem with Yosemite.
Question: Does anyone know how to fix this?

Thanks for confirming the connection.
For you to have the Scan button that you previously saw in Printers & Scanners the ICA driver must be installed. Typically this would be downloaded from the Apple Software Update server when you add the device. And this same ICA driver is used by Image Capture for scanning.
The ICA driver is installed in /Library/Image Capture/Devices and will be labelled CanonIJScannerX, where X is a number. I'm not sure what number it will be for this model. You should already have at least one of these packages in this folder. Can you reply with what you do have in this folder and I will check to see if the MX310 is listed in the respective packages you do have.
With MP Navigator/ScanGear also not working I wonder if you have some other software running that could be impacting the operation of the USB port? Ever had another brand of multifunction device installed on this Mac? If so, what brand?

Similar Messages

Has anyone downloaded Yosemite and found that there are no ore scroll bars? I have to move the window (of any window, Skype window, browser window etc.) in order to find the scroll bar and then it disappears so fast I can't even use it.

Has anyone downloaded Yosemite and found that there are no ore scroll bars? I have to move the window (of any window, Skype window, browser window etc.) in order to find the scroll bar and then it disappears so fast I can't even use it.

Not sure why that was unchecked but good to know!
Apple's new default (since at least a couple of OS releases back) is to have it off so OS X matches the behavior of an iPhone or iPad.
I almost never need a scroll bar, and when I do, I just move over to the edge of the window when scrolling and a larger scroll bar appears.
Yes, for the most part, users don't really need the scroll bar. That's what the scroll wheel on almost all mice is for. Saves the trip over to bar to physically grab and move it. But, I do like it on all the time regardless. That way (especially with a long article) I can just take a quick glance over to the bar to see about where I am on the page (a third of the way down? halfway?). Otherwise, I have to move the page just to make it appear to give me the same information.

ODM and ODM schema versions are incompatible please use ODM api version ver

Hi,
I am with a problem, I am with the version of Oracle 10g 10.1.0.3 EE in Linux As 3 and I am not getting to rotate Oracle it Dates Mining, when I am going login in the program him of the the following mistake,
ODM and ODM schema versions are incompatible please use ODM api version version 10.1.0.3
excuses for bad English!
tks,
Welvis Douglas
Msn : [email protected]

Hi,
When using Data Miner, the api that it uses to connect to the ODM database option must have the same version number as the db itself.
See the following page:
http://www.oracle.com/technology/products/bi/odm/odminer.html
And scroll down to the section on the 10.1.X apis:
"Data Miner requires that the version of odmapi.jar in the Data Miner lib directory be the same as the version of odmapi.jar installed with ODM. The version of odmapi.jar shipped with Data Miner is 10.1.0.2. Here are the additional patch versions of odmapi.jar for download:"
There are links there to get the .jar files required for the version you are using (10.1.0.3).
Thanks, Mark.

AirPort Express and Canon MX310

Hello
I am trying to setup my Canon MX310 via AirPort Express:
Today i bought the AirPort Express and everything works fine. But printing does not work at all: I usually connected my printer directly via USB to my iMac. When i did that the first time, the driver for the printer was downloaded and i was able to print. Today, i connected the printer to my AirPort Express, deleted the printer from the printer list (because it is not connected directly via USB to the iMac) and tried to print. But it does not work. There is no printer to select from the list. I already downloaded several drivers but there are still no printers available. What do I have to do now? Do I have to download a driver first? Or should the iMac detect the printer automatically when it is connected to AirPort Extreme via USB?

Connect the Canon to the USB port on the AirPort Express
Open System Preferences (gear icon on the dock)
Open Print & Fax
Click the + (plus) button at the bottom of the printer list
Does your printer appear in the list of devices?
If yes, click on the name of the printer to highlght it, then click Add at the lower right
If so, your printer may not be compatible, or you may not have the latest drivers from Canon.
Refer to Apple's Printer Troubleshooting Guide for more details:
http://support.apple.com/kb/TS1253

Yosemite and Canon A630 camera

I have a Canon A630 camera which I have been using successfully on a Windows machine. I attached it to a new MacBook Pro running Yosemite and it does not recognize that the camera is attached. Do I need software from Canon or should Yosemite recognize it?

Hello DonHalt,
Based on your post, it sounds as though your camera is not being recognized via USB. I have included an article that provides some helpful troubleshooting steps:
OS X Yosemite: If a USB device isn’t working
If your USB device isn’t working, there are several things you can try to solve the problem
If a USB device isn’t working properly, make sure you connected it to your computer correctly, plugged it into a power outlet if it has a power cord, and installed any software it needs.
Check power and cables:
Make sure the USB device is turned on and its cables are properly connected.
Check for missing software:
Make sure you installed the latest software for your device. Visit the manufacturer’s website for any updates.
If the device is connected to a USB hub:
Make sure the device and the hub are the same speed. Connect USB 3.0 SuperSpeed devices to a USB 3.0 SuperSpeed HUB, USB 2.0 Hi-Speed devices to a USB 2.0 Hi-Speed hub, and so on.
If the device doesn’t have a power cord and is plugged into another USB device that doesn’t have a power cord:
Try plugging the device directly into your computer’s USB port or into a USB device that does have a power cord. You might need to disconnect and reconnect the other device as well, if it has stopped responding.
If you have many devices connected to your Mac:
Disconnect all USB devices except the device you’re testing, an Apple keyboard, and an Apple mouse. Make sure that the device is connected directly to the computer, and that any hubs or extension cables are disconnected. If you can use the device now, the problem may be with one of the other USB devices or hubs you had connected to your computer. Try reconnecting them, one by one, to your computer. When you find the device causing the problem, review its documentation for further troubleshooting steps.
Verify that the device appears in System Information:
Choose Apple menu > About This Mac. In the window that appears, click Overview, then click the System Report button to open System Information.
In the window that appears, see if the USB device is listed below Hardware in the Contents list. If the device appears but does not work, review the device’s documentation for further troubleshooting steps.
Restart apps:
Quit and restart any apps that use the device.
Restart your Mac:
Choose Apple menu > Restart.
Check your device’s USB connection
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD

Canon MX310 scanner communication error with OS X 10.5.8

Does anyone have ideas to solve the Canon MX310 error message, "Cannot communicate with scanner." I'm running Canon MP Navigator EX 1.0. My MX310 prints & copies wirelessly using an Airport Extreme w/o difficulty. I have checked that the USB cable is connected, printer is ON and tried a shut down of both computer & printer then restart which didn't resolve the issue. The error id might be 155.0.0. I don't get any other error messages generated from OS X. Thanks!

http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/pixma_mx_s eries/pixma_mx310#DriversAndSoftware has drivers for 10.5 Did you try downloading them?

Yosemite and Canon LBP 5200

I cannot seem to find a driver that fits between my updated Yosemite and my new (2nd hand) Canon LBP 5200. I downloaded the latest driver (for OSX 10.5) available from canon's website,
http://search-au.canon.com.au/canon__au_en__au_en/search.x?q=&ie=utf8&cat=0&ct=S upport&pagemax=10&imgsize=1&pdf=ok&zoom=1&hf=category%09zubaken&cf=model_sm%3ALA SER+SHOT+LBP5200&modelName=LASER+SHOT+LBP5200&ref=www.canon.com.au&pid=m8LewQkHc O7RE3irxpChUg..&qid=Em7T1TZvnrHhBHRxt99RWdugVEtFCiFs&d=DOWNLOADS%09Mac+OS+X+v10. 5
but when I go to add the printer, it appears in the list, but it does not show CAPT driver in the Use: box. It wants me to choose a driver, which I then do, and after selecting Select software, a list of printer drivers appear - except one for the LBP5200!!!
Please help

Download Canon LBP5200 NetSpot Device Installer v.3.2.3(r3202) driver
Says it's for 10.6 and it will work better than the 10.5 version.

Yosemite and Canon RAWs - Random "Unsupported File Format"

It all started with Yosemite betas, random raw files in Aperture would pop up with the dreaded "Unsupported File Format" graphic. I tried a lot of stuff, rebuild the library, delete prefs, etc. Nothing work. I tried exporting the raws and neither iPhoto or Preview would open them. Downloaded the LightRoom 5 trial and it opens the files fine. OK, tried Aperture on a laptop with Mavericks, the files open fine there too. So it looks like it is something in the way that MacOS is handling
Any ideas? Now with the final release of Yosemite and Aperture 3.6 trying to open one of these file just crashes the software. I can't really say I like LightRoom but if I have to move on, I guess I will.

What version of iPhoto is it?
The issue is that the OS provides RAW support, but the applications need to leverage it. Aperture 1.5.6 is old: Aperture 2.0 came out in March of 2008 so there hasn't been an update to Aperture 1.5 since 2007-ish. It is unlikely that any cameras that shipped since then will ever be supported in Aperture 1.5.x.
The improvements/advantages to going with Aperture 3.1 over 1.5 are huge (assuming you have a capable machine) and well worth it.

Upgraded to Yosemite and all my files are gone

I upgraded to Yosemite on my Macbook pro and once it restarted after the install, my desktop was empty and all my documents are gone.
I do have a time machine backup on an external drive but I am hesitant to connect it for fear of losing overriding that data too.
I did get an error that the library need to be repaired so I am wondering if the update did not process correctly

I'm seeing a lot of activity about this on other forums about like this one: "
Mail index damaged after yosemite upgrade"
I'm betting I'm seeing the same problem. Should I try this?:
Try re-indexing and rebuilding the mailbox:
http://macdailynews.com/2014/04/25/how-to-fix-apple-mail-by-rebuilding-and-reind exing-the-mailbox/

Airport Extreme and Canon 5600F scanner

If I plug the Canon 5600F directly into the Macbook Pro it scans perfectly, but the Airport doesn't recognize the scanner when it is plugged in via a USB 2.0 hub. I set the scanner to share over the network. The scanner doesn't have an Ethernet port.
What am I doing wrong?

Understand the hassle. But, you can't really put this one on Apple as they have no choice but to use the device drivers that other manufacturers supply to them.
At this point, as far as I am aware, there's not a single manufacturer that has written drivers to allow full functionality for all-in-one devices when connected to the USB port on the AirPorts.
Still, you might want to voice your opinion to Apple on this. There's no assurance that that they even read these boards and if enough users ask for a certain feature, perhaps they will incorporate it in the future.
AirPort Extreme Feedback

OS X Yosemite and Canon iRC 1021

I had the same issue with a Kodak printer and an iMac at home. Followed this page and everything was working again. Give a shot and it might work for you as well.
http://support.en.kodak.com/app/answers/detail/a_id/49527/~/error%3A-filter-failed-message%3A-printi...

On our LAN we have a Canon iRC 1021/1022 used by several Windows clients and two Mac clients. The Mac clients, a MacBook Pro and an iMac, were both running Mavericks. Both have been using the same Canon driver downloaded from Canon USA.
Both Macs recently updated to Yosemite. The MacBook Pro continues to print to the Canon with no problem. The iMac however does not. When the iMac sends a print job to the Canon print queue, it fails stating "Failed - Filter" next to the job in the queue.
The Canon USA site does not offer a printer driver for Yosemite for this device, only a fax driver.
Since the MacBook continues to print to this device after the update to Yosemite, it appears the iMac could also, if the problem causing the failure is addressed. Any ideas on what might be the issue?
Thanks!
This topic first appeared in the Spiceworks Community

Firefox 7.0 and ZoneAlarm Extreme 2011 are incompatible-how do I fix this?

I am trying to run Firefox 7.0 with ZoneAlarm Extreme 101.056.000. I contacted ZA and followed their directions: 10:24Mandy M.: Hello Freda. I am sorry for the inconvenience. What version of FireFox are you running?
10:26Freda Ramirez: I tried upgrading to 7.0 then to 8.0 but neither will work. I had to go back to 6.0 which is not secure. I am running ZA Ex 10.1.03.000. I tried upgrading to 10.1.056.000 but it only locked my PC for 5 min and I had to manually shut the thing down.
10:28Mandy M.: Okay. We do not support version 8 at this time and only version 10.1.056.000 supports version 7 of FireFox. I can certainly provide you with some steps to try to install version 10.1.056.000, if you wish.
10:28Freda Ramirez: yes
10:30Mandy M.: I recommend the steps below.
1.) Click Start -> Run NOTE: If you do not have the Run option on the Start menu, you can press and hold the Windows logo key and tap the letter R .
2.) Type Msconfig in the run box
3.) Click OK
4.) Once in Msconfig, click the Startup Tab, and remove the checks from everything.
5.) Click the Service Tab, place a check in "Hide All Microsoft Services." Now remove checks from everything.
6.) Click OK
7.) Restart your computer
8.) SAVE the ZoneAlarm clean tool from the link below: http://download.zonealarm.com/bin/free/support/download/clean.exe
9.) When the download box pops up, choose SAVE. In the next box, choose Save to Desktop then run the file from there and follow the on screen prompts to complete the uninstall. Be sure to restart your computer if prompted.
10.) Clear your Windows temporary file cache by following the steps below: - Go to Start ->
Run NOTE: If you do not have the Run option on the Start menu, you can press and hold the Windows logo key and tap the letter R . - Type %temp% and click OK - Select all of these files and delete them - Empty your recycle bin
11.) Reinstall ZoneAlarm again from the link below: http://download.zonealarm.com/bin/free/1025_za/ZASPSetup_101_056_000.exe
Please save the download to your desktop and then run the download file to start the installation.
10:30Mandy M.: I recommend the steps below. 1.) Click Start -> Run NOTE: If you do not have the Run option on the Start menu, you can press and hold the Windows logo key and tap the letter R . 2.) Type Msconfig in the run box 3.) Click OK 4.) Once in Msconfig, click the Startup Tab, and remove the checks from everything. 5.) Click the Service Tab, place a check in "Hide All Microsoft Services." Now remove checks from everything. 6.) Click OK 7.) Restart your computer 8.) SAVE the ZoneAlarm clean tool from the link below: http://download.zonealarm.com/bin/free/support/download/clean.exe 9.) When the download box pops up, choose SAVE. In the next box, choose Save to Desktop then run the file from there and follow the on screen prompts to complete the uninstall. Be sure to restart your computer if prompted. 10.) Clear your Windows temporary file cache by following the steps below: - Go to Start -> Run NOTE: If you do not have the Run option on the Start menu, you can press and hold the Windows logo key and tap the letter R . - Type %temp% and click OK - Select all of these files and delete them - Empty your recycle bin 11.) Reinstall ZoneAlarm again from the link below:
http://download.zonealarm.com/bin/free/1025_za/ZASPSetup_101_056_000.exe
Please save the download to your desktop and then run the download file to start the installation.
I have done this several times with Firefox 7.0 loaded and without it loaded on my PC. I still cannot use Firefox and now my ZA tells me that my computer is at risk because my anti-virus/anti-spywareise not activated. However, everytime I click to turn them on, they immediately go off and the ZA update function does not work, it gives me an error message when I try to use it. Oh yes, I also cannot use internet links are are in eamils. Needless to say, I am totally frustrated with the whole process. Can you help me with this.

The default of the pref network.http.max-connections has been increased from 30 to 256 in Firefox 6+ versions.
Try to decrease the value of the pref <b>network.http.max-connections</b> from 256 to 30 as used in Firefox 3 versions.
*https://support.mozilla.com/kb/Firefox+never+finishes+loading+certain+websites
See also:
*http://blog.bonardo.net/2011/09/30/is-your-firefor-freezing-at-regular-intervals
*Places Maintenance: https://addons.mozilla.org/firefox/addon/places-maintenance/

How do i uninstall this latest version? I have trend micro anti virus and it said you are incompatible at this time. you did not give me a choice of opting out so I am opting out of using firefox since my protection is now gone.

Several days ago firefox wanted to upgrade and I refused because trend micro was not supported. Today it automatically made the change. I have trend micro and your message said it would not work. I would think that an antivirus program would be one of the most important features to be able to work. Either fix it or tell me how to roll back to the other version. If you cannot I am dumping firefox and going back to internet explorer. So for now I am closing this window and using IE untill I hear from you

I've had almost every issue you've had. Finally on Friday the screen blacked out. It was obviously still charged, since I could hear the message ring, but when I tried to light up the display it didn't light so I was unable to get to it unless I removed the battery. Then, as soon as the display timed out, I couldn't get it lit up again without removing battery. I had the same slow movements throughout the display as well as slow text messaging. Every issue you had other than the alarm clock (that always worked well).
I took it in yesterday and, after over an hour spent there with a 'professional', I still had no answers. He told me to come home and copy everything from my sd card to my computer, then re-format my card. Well, my phone didn't even recognize that I had an sd card installed!! Nor did my computer!
So then I got to experimenting...I removed the card and viola!!!!!! The phone worked GREAT! It's never worked so fast! I then installed my husbands sd card to see if it was my phone's card reader or my card. Turns out that the phone still worked great with his card installed and it did recognize his card in my phone. So, my conclusion is that I need a new card. I couldn't believe the difference in speed of everything! It's like a brand new phone!
As for the hard reset...I did that over the weekend, before I could get to a verizon store. It didn't work at all.
I'd say, do the same thing I did and see if that works. Can't hurt!!! Please keep me posted. I'd like to see what you find out
Good Luck!!!!

I'm told that Firefox and Google maps interface are incompatible?

When I try to use a website that contains a Google Map, the application fails. I can send a screenshot if that will help.

Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Intalled os x yosemite and my greys are displaying brown and Im receiving this error message -Checking 80 profiles... /Library/Application Support/Adobe/Color/Profiles/RedBlueYelllow.icc    Tag 'pseq': Required tag is not present. /Library/Applicati

Intalled os x yosemite and my greys are displaying brown and Im receiving this error message
Tag 'pseq': Required tag is not present on 4 of my color profiles
Thank you

EtreCheck version: 2.0.6 (91)
Report generated October 23, 2014 at 6:17:40 PM EDT
Hardware Information: ℹ️
    MacBook Pro (17-inch, Mid 2009) (Verified)
    MacBook Pro - model: MacBookPro5,2
    1 2.8 GHz Intel Core 2 Duo CPU: 2-core
    4 GB RAM Upgradeable
        BANK 0/DIMM0
            2 GB DDR3 1067 MHz ok
        BANK 1/DIMM0
            2 GB DDR3 1067 MHz ok
    Bluetooth: Old - Handoff/Airdrop2 not supported
    Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
    NVIDIA GeForce 9400M - VRAM: 256 MB
    NVIDIA GeForce 9600M GT - VRAM: 512 MB
        Color LCD 1920 x 1200
System Software: ℹ️
    OS X 10.10 (14A389) - Uptime: one day 3:29:31
Disk Information: ℹ️
    FUJITSU MJA2500BH FFS G1 disk0 : (500.11 GB)
    S.M.A.R.T. Status: Verified
        EFI (disk0s1) <not mounted> : 210 MB
        Macintosh HD (disk0s2) / [Startup]: 499.25 GB (245.60 GB free)
        Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
    HL-DT-ST DVDRW GS21N
USB Information: ℹ️
    Apple Inc. Built-in iSight
    Apple Inc. BRCM2046 Hub
        Apple Inc. Bluetooth USB Host Controller
    Apple, Inc. Apple Internal Keyboard / Trackpad
    Apple Computer, Inc. IR Receiver
Gatekeeper: ℹ️
    Mac App Store and identified developers
Kernel Extensions: ℹ️
        /Library/Extensions
    [loaded]    com.sophos.kext.sav (9.2.50 - SDK 10.8) Support
    [loaded]    com.sophos.nke.swi (9.2.50 - SDK 10.8) Support
        /System/Library/Extensions
    [not loaded]    com.Seagate.driver.PowSecDriver (4.4.10) Support
    [not loaded]    com.rim.driver.BlackBerryUSBDriverInt (0.0.39) Support
    [not loaded]    com.rim.driver.BlackBerryUSBDriverVSP (0.0.39) Support
    [not loaded]    com.wacom.kext.wacomtablet (6.3.9 - SDK 10.9) Support
    [not loaded]    com.wdc.driver.1394HP (1.0.9) Support
    [not loaded]    com.wdc.driver.USBHP (1.0.11) Support
Startup Items: ℹ️
    HP IO: Path: /Library/StartupItems/HP IO
    Startup items are obsolete and will not work in future versions of OS X
Launch Agents: ℹ️
    [not loaded]    com.adobe.AAM.Updater-1.0.plist Support
    [running]    com.adobe.AdobeCreativeCloud.plist Support
    [running]    com.amazon.sendtokindle.launcher.plist Support
    [loaded]    com.hp.help.tocgenerator.plist Support
    [running]    com.intego.commonservices.statusitem.plist Support
    [running]    com.intego.netupdate.agent.plist Support
    [loaded]    com.intego.personalbackup.agent.plist Support
    [loaded]    com.intego.task.manager.notifier.plist Support
   [invalid?]    com.intego.VirusBarrierX6.alert.plist Support
[invalid?]    com.rim.BBLaunchAgent.plist Support
    [running]    com.sophos.uiserver.plist Support
    [running]    com.wacom.wacomtablet.plist Support
    [invalid?]    Kersh-Wellness.Activity-Monitor-Dock.plist Support
Launch Daemons: ℹ️
    [loaded]    com.adobe.fpsaud.plist Support
    [running]    com.intego.commonservices.daemon.plist Support
    [loaded]    com.intego.commonservices.icalserver.plist Support
    [loaded]    com.intego.commonservices.metrics.kschecker.plist Support
    [running]    com.intego.netupdate.daemon.plist Support
    [running]    com.intego.personalantispam.daemon.plist Support
    [running]    com.intego.PersonalBackup.daemon.plist Support
    [running]    com.intego.task.manager.daemon.plist Support
   [invalid?]    com.intego.VirusBarrierX6.daemon.plist Support
   [invalid?]    com.intego.VirusBarrierX6.scanner.daemon.plist Support
    [loaded]    com.microsoft.office.licensing.helper.plist Support
   [invalid?]    com.rim.BBDaemon.plist Support
    [running]    com.sophos.common.servicemanager.plist Support
    [invalid?]    com.wdc.WDSmartWareServer.plist Support
User Launch Agents: ℹ️
    [loaded]    com.adobe.AAM.Updater-1.0.plist Support
    [loaded]    com.adobe.ARM.[...].plist Support
    [loaded]    com.adobe.ARM.[...].plist Support
    [loaded]    com.adobe.ARM.[...].plist Support
    [invalid?]    com.citrixonline.GoToMeeting.G2MUpdate.plist Support
   [invalid?]    com.google.GoogleContactSyncAgent.plist Support
    [loaded]    com.google.keystone.agent.plist Support
    [running]    com.microsoft.LaunchAgent.SyncServicesAgent.plist Support
    [running]    com.spotify.webhelper.plist Support
User Login Items: ℹ️
    iTunesHelper    UNKNOWN (missing value)
    Antispam Engine    ApplicationHidden (/Library/Application Support/Intego/Personal Antispam/Antispam Engine.app)
    EvernoteHelper    UNKNOWN (missing value)
    Android File Transfer Agent    Application (/Users/[redacted]/Library/Application Support/Google/Android File Transfer/Android File Transfer Agent.app)
    iAntiVirus    UNKNOWNHidden (missing value)
    SpeechSynthesisServer    Application (/System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks /SpeechSynthesis.framework/Versions/A/SpeechSynthesisServer.app)
    Google Drive    UNKNOWN (missing value)
    EvernoteHelper    Application (/Applications/Evernote.app/Contents/Library/LoginItems/EvernoteHelper.app)
    StatusMenu    Application (/Incompatible Software/StatusMenu.app)
    HPEventHandler    UNKNOWN (missing value)
Internet Plug-ins: ℹ️
    WacomNetscape: Version: (null) Support
    Default Browser: Version: 600 - SDK 10.10
    Flip4Mac WMV Plugin: Version: 2.3.8.1 Support
    OfficeLiveBrowserPlugin: Version: 12.2.6 Support
    WacomTabletPlugin: Version: WacomTabletPlugin 2.1.0.6 - SDK 10.9 Support
    AdobeAAMDetect: Version: AdobeAAMDetect 2.0.0.0 - SDK 10.7 Support
    FlashPlayer-10.6: Version: 15.0.0.189 - SDK 10.6 Support
    AdobePDFViewerNPAPI: Version: 11.0.06 - SDK 10.6 Support
    Silverlight: Version: 5.0.61118.0 - SDK 10.6 Support
    Flash Player: Version: 15.0.0.189 - SDK 10.6 Support
    QuickTime Plugin: Version: 7.7.3
    iPhotoPhotocast: Version: 7.0
    SharePointBrowserPlugin: Version: 14.2.0 - SDK 10.6 Support
    DirectorShockwave: Version: 11.6.0r626 Support
User Internet Plug-ins: ℹ️
    CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 Support
    Picasa: Version: 1.0 - SDK 10.4 Support
3rd Party Preference Panes: ℹ️
    Flash Player Support
    Flip4Mac WMV Support
    NetUpdate Support
    WacomTablet Support
Time Machine: ℹ️
    Time Machine not configured!
Top Processes by CPU: ℹ️
        12%    firefox
        10%    WindowServer
         4%    plugin-container
         0%    hidd
         0%    AppleSpell
Top Processes by Memory: ℹ️
    743 MB    firefox
    451 MB    plugin-container
    94 MB    Finder
    90 MB    mds_stores
    77 MB    WindowServer
Virtual Memory Information: ℹ️
    64 MB    Free RAM
    1.22 GB    Active RAM
    1.16 GB    Inactive RAM
    733 MB    Wired RAM
    9.37 GB    Page-ins
    119 MB    Page-outs
MacBook Pro, OS X Yosemite (10.10)

Yosemite and Canon MX310 scanner are incompatible

Similar Messages

Maybe you are looking for