My screen colors are messed. Pink lines. I have tried turning it off and resetting. Any ideas?
My iPad screen has pink lines. The colors are messed up. I have tried resetting and turning it off. Any ideas?
Did you drop the iPad?
Did you do this Reset?
Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
Cheers, Tom
Similar Messages
-
Hi there,
Can someone please help. My IPhoneS stopped working right after I did the latest update which was yesterday. Now, the phone does not work at all. When turned on, the screen shows a picture of USB cable pointing to the ITunes logo. I have tried just about everything, and cannot get it working. It's like it is frozon. My ITunes does not recognize my device. Cannot dial out either. I desperately need to get it working. Can someone please help me.
Thanking you in advance for your help. :-)The update did not do anything.
AT&T cannot and will not do anything, they do not provide support for iPhones, Apple does.
The issue is not with the iPhone or iOS if you've reset network settings and tried forgetting the Wi-Fi Network, it is specific to the network.
Check the settings on the router, try disabling the security settings first... that will clarify the issue is not with the device but rather the Network. -
While talking on the phone this morning, it was fully charged, the screen went blank and I could no longer use the phone. I tried turing it off and then on, but it still ghad a blank screen. I even tried charging the phone, but it still has a blank screen.
I am sorry to hear about your phone.
You could try connecting it to your laptop and see if itune recognises the phone.
If it does then make a backup of your phone.
You could then restore it and see if it helps.
It shouldn't be much of a problem if its a software issue but if something went wrong with the hardware then you might have to go to an Apple store.
Hope this helps -
I Got an iPad air 2 yesterday and had no problems downloading apps. The pad has been synced to my phone. Today I am unable to download apps on either devise Tried logging out of iTunes on both but now can not connect to iTunes and do not receive an error code.
Thank goodness it's not just me. I also have tried everything from previous forums and nothing works. I logged out and cannot log back in. Even changed password to no avail. How can we find out if this is an Apple problem.
-
I've been having an issue with assistive touch, every time I open an app. the AT disappears the from the screen and I have to turn it off and ON again. Is there a way to fix this?
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device. -
I have only recently got my iphone, and the screen won't rotate in Safari, the ipod, photos or messaging. It works fine in games (eg Doodle Jump). The screen portrait lock is off, and i have tried turning it on and off and updating it. Why wont it rotate?
Next step is to Restore it in iTunes from your backup. If that does not work they try Restoring it as a new phone. If still no go it is a hardware failure and you will need to get it serviced.
And you are not showing the hardware lock icon on the top right of the home screen? -
touch screen on my iphone 4 is frozen and unresponsive can anyone help me. i`ve tried turning it off and on but no change at all
Basics from the manual are restart, reset, restore.
Try all of these.
iPhone User Guide (For iOS 4.2 and 4.3 Software) -
my iphone 4's screen has gone black, like it would if i had turned it off except i have'nt turned it off and i cant turn it on or anything. can anyone help?
Try a reset. Hold down the Sleep/Wake button + Home button for around 10 seconds until the Apple logo appears.
Let me know if this helps.
- Greg -
My screen won't work, i have tried turning it off but i cant swipe the power down button because my screen doesnt work. I have only had my iphone 4s for one day and this has happened, someone please help me.
Did the trick! Not sure what I did to cause the screen to go numb, but this worked perfectly!!! I cleaned the screen and must have inadvertently selected something that locked the screen. This perfect solution kept me from having to run to the Apple Store. Many thanks.
-
my iphone 4 screen has gone blank and its still on it vibrates when i put it on charge ive tried turning it off and the screen is still not showing anything please help
Hi Ellen,
Welcome to Apple Support Communities.
It sounds like your iPhone 4 has a dim or blank black screen but responds to some commands like enabling vibrate. I understand this may be a frustrating situation, but the troubleshooting suggestions in the article below will help you solve the issue.
Get help with the screen on your iPhone, iPad, or iPod touch - Apple Support
If your screen is too dim, too bright, or you see only faint images
Try to adjust the brightness. If the screen doesn’t respond when you adjust the brightness, open several apps to make sure it’s not an issue with only one app.
If you have a screen protector, try removing it. Try removing your case if it includes a screen protector.
If you see the issue in multiple apps, restart your device.
If restarting doesn’t fix the issue, restore your device.
If you still see the issue after you restore, contact Apple Support.
Take care,
-Jason -
My Ipad is stuck on the connect to iTunes screen, I have tried plugging into iTunes but it makes the necessary noise but the computer does not recognise it and nothing alters on the Ipad screen. Have tried various computers and leads and it still does not work. Have also tried the switching off, plugging in to computer and turning on again using the on button and then the home button but nothing works. This happened while I was downloading software update. Please help me.
I suggested several things to GeekyNerdGirl in her first post here. Take a look.
My iPad is in what seems like permanent restore mode after iOS 7.2 update?
It can take more than a few attempts before Recovery Mode will work and you have to follow the steps exactly. DFU mode is even harder to perform correctly beside of the 10 second hold. Don't stop trying. Eventually one of these methods could work for you. -
I have just updated the i06 software for my iPad and it will not connect to my home wifi network - all my other devices are able to connect to my wifi network.
I have attempted all troubleshooting actions suggested and nothing has worked. I have restored my iPad network and factory settings - Please help - this is frustrating meyou have to set up your router to solve th problem. first find and write down the ipad mac address.
then log on to your router using your laptop or any device that can connect to router at 192.168.0.1 in your web browser. please check out my posting about how to resolve the wifi connection problem.
i think the ios6 update has reset the networking but if you set up the router then you should not have the same problem any more. -
Received SW update notice (from Apple) this morning for my 24" iMac. After it re-bootd, all that appeared is a white screen - no icons, just white. I re-booted, again - just a white screen.
Start up using your original install discs by inserting the disc and holding the C key while rebooting. Run Disk Utility to repair the drive and restart. If everything goes ok run Software Update again.
-
All the keystrokes sounds in different sounds that go with the phone have stopped working do you know how to make them go again? The ring tones and notifications down this still work but not that keystrokes are other in phone sounds. Is there something I can do other than turn the phone off and on to restore them?
Basic troubleshooting steps clearly outlined in the User Guide are restart, reset, restore from backup, restore as NEW.
If the basic troubleshooting steps don't work, then you'll need to bring your phone into Apple for evaluation and probable replacement. -
My ipod touch has frozen with a white screen. The on/ff and sleep buttons will not work whether pressed for a moment or held for more than 10 seconds as per help pages. When connected to computer it is not recognised and no indication in "devices".It has been working perfectly from Christmas until now. Was watching a TV prog via BBC iplayer when the image and sound froze for about 5 seconds then just white screen. Help
First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
Maybe you are looking for
-
i was wondering if i had to buy that air port apple router to have wi fi on my mac book or can i use just my normaal that i use on windows.i checked at apple and it doesn t says it comes with an air port express or extreme.
-
HI, EVERY BODY I NEED INFORMATION ABOUT : <b>BUSINESS FLOW in BW</b> it is SD DATA FLOW or SOURCE SYSTEM to BW FLOW OR WHAT ? PLZ SEND ME AT [email protected]
-
How to capture oldmaterial number from R/3 to CRM
Hi Experts we have a requirement where in we need to capture the old material number in crm product master from R/3 material master and the user is trying to search the material with the old material number that has been replicated from the R/3 bac
-
Installing OBIEE on Windows 7, quick questions
Dear Experts, Last year, I struggled installing OBIEE on Linux 5.5. Now I want to install it on Windows 7 Ultimate. It will be stand alone, for my own use only. Both a client, and a server. Some quick questions: 1) Does the Windows server need to hav
-
My iPod is locked so it's telling me to login to iTunes but I can't sync with any computer.
I just put on a new passcode on my iPod yesterday and I forgot the passcode for it. I kept trying what I remembered of it in any way I thought possible but it was never the correct passcode. I tried once more and now it says "iPod is disabled - conne