My signed applet works with 1.4.1 plugin but it doesn't with 1.4.2_02 !!!

Hi there, I've got problems trying to sign an applet with Java 2. That applet is an FTP which is used for uploading files throught the Browser (just upload).
I signed my applet with SDK 1.4.1 when I surfed the page which contains it, the applet works properly (the browser had Java plug in 1.4.1) ... the certificate appeared (thawte), I clicked "Yes" for agreeing the certificate .. everything went fine. The problem was when I tried to navigate that page with a Browser with Java Plug in 1.4.2, I agreed the cetificate, but when I tried to upload a file with the applet the following error happens :
ava.security.AccessControlException: access denied (java.io.FilePermission C:\install\slsk151.wma read)
     at java.security.AccessControlContext.checkPermission(Unknown Source)
     at java.security.AccessController.checkPermission(Unknown Source)
     at java.lang.SecurityManager.checkPermission(Unknown Source)
     at java.lang.SecurityManager.checkRead(Unknown Source)
     at java.io.FileInputStream.<init>(Unknown Source)
     at java.io.FileInputStream.<init>(Unknown Source)
     at FtpSigned.upload(FtpSigned.java:463)
     at FtpSigned.run(FtpSigned.java:526)
     at java.lang.Thread.run(Unknown Source)
after that I downloaded the SDK 1.4.2_02 and I installed the plugin
1.4.2_02 (build 1.4.2_02-b03)
I signed tha applet again and it didn't work ...
please ... I need help!
Thanks in advance.
Nico.

Funny, I had a problem going to _03 when it worked fine in _02. Symptoms: In IE, Sun's plug-in displays security warning prompt for signed applet, and, even though the user clicks YES to accept, all priv operations cause exceptions. It sounds like what you're referring to, but I'm wondering why I didn't see it in _02. Anyway, I'm going to look into the doPriv... stuff to see if that fixes my prob and I'll report back FWIW.

Similar Messages

  • When streaming a movie with the new Apple TV, and using a DSL Internet connection, all audio sound works, e.g., the music track, but the audio track with the actor's voices, does not work. What can I do?

    When streaming a movie with the new Apple TV, and using a DSL Internet connection, all audio sound works, e.g., the music track, but the audio track with the actor's voices, does not work. What can I do?

    Hi Brian,
    Thanks restoring and restarting didn't fix my problem - i have started it fresh and still it doesn't work. Basically I press ONCE on the remote, after the machine has not had any commands for 10 minutes, and the cursor skips from one end of the menu to the other - so I can't choose network or update software etc - I sometimes manage to stop it randomly in the middle of the menu if I press on a command in the middle of the cursor skipping all the menu steps...not sure what the problem is but I have basically not used my brand new apple tv since I bought it for that reason! I should call Apple support I suppose! grrrr hate wasting time with stuff like this!
    Thanks for your help though!
    Pernille

  • After upgrading to iOS 5, my iPhone 4 takes a very long time to open digitally signed emails. I've tried with the SMIME settings enabled, but that doesn't help either. Any ideas on how to resolve this?  Thanks in advance.

    After upgrading to iOS 5, my iPhone 4 takes a very long time to open digitally signed emails. I've tried with the SMIME settings enabled, but that doesn't help either. Any ideas on how to resolve this?  Thanks in advance.

    I suspect you may have a corrupt photo or image that is causing the sync to fail or quit. You might want to try removing all of your photos by deselecting them in iTunes then sync - and try adding them by each sub-folders until you are able to nail down which sub-folder of photos, that causes the sync to stop or gives you errors.

  • I have an HP Photosmart Premium C410. It worked great with Mountain Lion, but it doesn't with Mavericks. Can't install any printing s/w even though it's on the network. Anyone know why????

    i have an HP Photosmart Premium C410. It worked great with Mountain Lion, but it doesn't with Mavericks. Can't install any printing s/w even though it's on the network. Anyone know why????

    So, this post, as well written as it is, went totally ignored by the HP personnel that are supposedto be "helping" us poor novices? WOW! No wonder this crap gets thrown out of the house so often.
    I have two HP network printers. An HP Officejet 4500 G510g-m, and a HP Photosmart Premium C410a, and they are the most unreliable pieces of "equipment" that I have in my network. This is absolutely trhe crappiest bunch of junk on the market. The only thing worse than these "devices" is the support from HP for them.
    I also have a HP Photosmart C5280 AIO, and a Deskjet D2345 Printer. I have little, to no, problems with these two. The "flagships" of my network imaging are the worst, of the worst.

  • I get a weak signal with WIFI or 3G on, but a strong signal with EDGE.HELP

    I get a weak signal with WIFI or 3G on, but a strong signal with EDGE. This doesn't make any sense! Help!

    this happens to me, too. i get 1 bar of 3g but 4-5 when it switches to edge.
    i also got this on my old blackjack ii and thought maybe it was just something having to do with that phone, but i guess not!

  • Signed applet working in Netscape 6 but not in IE 5.5

    I have an applet that reads a file from a server and tries to write it to a client machine. To this i self signed the jar file containing the applet using the keytool and jarsigner. So now I had a self signed applet. I tried to run this in IE. It gave the same error message that i used to get when I tried to run it the applet as unsigned. What am I missing here? Is self signing not enough to run the applet in IE? The same applet works in Netscape 6 and successfully downloads the file to the local machine. Please help me. I have added the certificate to the IE security panel as trusted.

    Netscape 6 has Java VM 1.3. if you use MSIE, you should try JavaPlugin.
    If interested in an appli that helps in signing process, you may download XLRSecTool for
    free at:
    . Windows:
    http://www.xlreader.com/download/stl10ea/InstData/Windows/NoVM/istl10ea.exe
    . Unix and Linux:
    http://www.xlreader.com/download/stl10ea/InstData/Unix/Others/istl10ea.bin
    . Other Java-enabled OS
    http://www.xlreader.com/download/stl10ea/InstData/Java/install.zip
    Requires Java VM 1.3.1
    Screenshot:
    http://www.xlreader.com/images/sshot_s673x548.gif
    -- Robert
    =====
    [email protected]
    XL-Reader Project - Secured online documentation solutions
    www.xlreader.com
    =====

  • Hi i ve found an iPhone 4s in mauritius Island .i live un France and the original carrier is africa flex orange. How CAN i activated the phone? I tried with an orange french sim but it doesn t work. Tks for helping me

    Hi i ve found an iPhone 4s during hollydays
    In mauritius Island . The original carrier is
    Africa flex orange mauritius . How CAN i
    Activated it?
    As i live in France i tried wz an orange s'il
    But it doesn t work
    Tks for your help

    Well, no it probably won't work because the phone is locked so there is nothing you can do.
    You won't be able to activate it, so you might never be able to use it.
    You have been dishonest here and if you found a phone, then someone had obviously lost it, so you should have handed it in to the police rather than keeping it for yourself. 
    You probably won't be able to use the phone because it sounds like the phone is locked to the carrier in Muaritius and if you don't own the phone and don't have a contract, then that carrier will problably not unlock the phone for you, so you now have a paperweight that you can't use.
    You get no help here for dishonest practices and you won't be able to activate or use that phone.

  • MIDI controller is working in the right usb port, but it doesn't in left

    Hello all,
    I have this strange problem, yesterday i bought MIDI keyboards it's M-AUDIO Keystation Mini 32
    The problem is that when i connect it to right USB port it works flawlessly, but when i connect it to my left USB port - my macbook pro recognizes the device but it doesn't send any midi data - to put it in other way: it is not working.
    I have checked, everything is working fine In the LEFT usb port( wireless mouse, external HDD, Flash drives, Iphone) except my MIDI Keyboard.
    Can anyone help? i've been searching for days for the solution, but, i'm out of ideas.

    Hey,
    i have the exact same problem! I was in the apple store and they replaced my macbook. then it just worked fine for a few days and now the problems is there  again.
    Do you already have a solution?

  • I can facetime with a friend in korea but i cant facetime with a friend in florida what is going on ?

    i can facetime with a friend in korea but i can't facetime a friend in florida what is going on ? how do  you delete an app that is still downloading ? i downloaded an app and it is taking forever to  download , i've downloaded the app before and it didn't take this long  what is going on? if anyone can help me that would be great thanks a bunch!!!

    Short Answer: Yes
    When they set up facetime, they either used an apple ID, or (for iphone only) their phone number.  You call using one of them.  An apple id linked email address in my opinion is simpler, as you don't need to worry about country codes and the like.  (I have never tried to facetime anyone out of the country, so I will admit I am not sure what you do about country codes.)
    These articles are a little dated, but should help you set up your or your friends facetime if you need to.
    Facetime Setup for iphone guide: http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-facetim e-set-up-use-and-troubleshooting-problems/
    Facetime setup for mac: http://simpleleapsoftware.com/blog/how-to-setup-facetime-on-your-mac/486/

  • Signed applet works on pc  but can't print on mac! security issue!

    Hello
    I have an applet which works beautifully on the pc under ie, firefox, chrome and safari. Essentially - it uses the batik libraries to download an svg file and then print it.
    Problem is that firstly - no matter which operating system or browser the applet ALWAYS asks me if i want to give it access to the printer. The checkbox that says don't ask this again does not work except while the same applet is loaded. Subsequent loads make it reappear. So that one annoys me.
    But the big issue is that under the Mac OSX my applet will not print. It claims a SocketPermission issue for the localhost port 631 connect,resolve. Of course, before you ask, yes, the jar is signed , and yes i was asked on the mac if i trust this user. It is a self signed certificate by the way.
    I have no idea why the mac is not allowing my trusted app access to the printer when the other operating systems do. Is it perhaps that i am not somehow getting the AllPermission policy file read?
    I have no idea where to even put the java.policy.applet that eclipse generates so i also put it into my jar file. I can't find any knowledge of that file out there or where to deploy it but i keep seeing reference to java.policy. so i copied java.policy.applet and renamed it java.policy and also included that in my jar. the upshot of doing that? Nada. With or without those policy files in my jar it makes no difference.
    DocPrintJob tmpJob = tmpPrinter.createPrintJob();                    
    HashPrintRequestAttributeSet set = new HashPrintRequestAttributeSet();
    tmpJob.print(tmpDoc, set); // its this line that fails
    I am new to java development (well actually about 8 years abstained from it) and this is one of those prototypes that says we either will use java or we won't. Please help, its the final hurdle. If it doesn't work on the mac then all that effort getting it to work on the PC was wasted. I also need to understand how to stop the annoying access the printer dialog before i can go live.
    Cheers

    If it is in the wrong format it must probably still show up though, if your mac does detect it, go to disk utilities> choose the device from the left hand side > go to the "erase" tab and change format to "Mac OS extended (Journaled) then hit "erase".
    IMPRTANT! : this will erase ALL of the files on your external hard drive
    If this dosent work, make sure your external hard drive's USB port is compatibe with both USB 2.0 and 3.0 and also make sure your mac USB socket isnt damaged either.
    Hope this helped

  • Elitebook works on battery and charges it - but does not start with it (only starting on AC)

    Hey,
    my 8460P only starts up when connected to AC power. Even with a fully charged battery it does not boot, i also have tested this with a replacement battery - but batteries are working on another Probook.
    Strange: If I unplug the AC directly after powering ON, the 8460p continues running on battery.
    What exactly happens:
    I have fully charged battery and no AC connected. I press the power button, the CPU fan makes noise (full throttle), LEDs are glowing: Wireless, Power and HDD. The DVD drive is initializing... and then after 3 seconds device shuts down - BUT the power LED keeps glowing.
    If I then press the Power button once again, nothing happens.
    But when I connect the AC back, the SCROLL LED glows for about 3-4 seconds and then turns off.
    What I did already: The well-known hard reset (disconnect everything, hitting power 30seconds): no success.
    Latest BIOS is installed. Factory defaults loaded... nothing. Played around with different BIOS settings (everything which sounds for "power" or "AC" tried...) nothing.
    This is not OS related - so updating any drivers or software does not make sense. 
    Further remarks:
    Also from the sleep modes (hibernate or S3) it will not wake up from battery... again only when connected to AC!
    Any solution/idea? please support. 
    Thanks a lot!
    regards,
    G

    @gambrinus 
    ‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
    If you are unfamiliar with the Forum's private messaging please click here to learn more.
    Thank you,
    Omar
    I Work for HP

  • I have an IPhone 4 that I just activated yesterday with a pre paid plan, but data doesn't work

    I activated the phone yesterday.  The wifi works but the 3g data does not.  I have between 3-5 bars of strength but the phone will not connect to the internet.  I had a virgin mobile pre paid phone that did not give me any trouble.  Please help.  I have done a hard reset, I have reset the network settings, as well. Neither have worked.  I have also turned the airport mode on and off, that did not work. 

    Sounds like your phone is in recovery mode.  In this case, all data on it is gone.  There's nothing to back up.

  • I have changed my apple id but cannot change it  on ipad. My old id comes up with request to log in, but it doesn't recognize my password or birthday. Help please.

    I have changed my apple id on itunes but can't change it on ipad. My old id asks for login but doesn't recognize password or birthday.  Help please.

    Hi on iPad itunes bottom of page Sign out then sign back in with new details. Cheers Brian

  • How do I get endnote to work, I have downloaded the plugin but still not available, How do I get endnote to work, I have downloaded the plugin but still not available

    Trying to get endnote to work, I have downloaded the required plugin from Apple website but I still can't open endnote or create a list of references etc. I notice on the webpage it says endnote is sold seperately? Can anybody help with this issue?

    You have to buy the EndNote application. http://www.endnote.com/
    Or are you having problem just to add endnotes or footnotes. Read about it on pages 55-59 in the Pages User Guide. It is downloadable from your Pages Help menu.

  • I have just upgraded to OSX 10.6.8 and now I cannot open or save PDF files from the internet. I get a dialogue box saying the QuickTime plugin has failed. I have tried to download the latest plugin but this doesn't work. Can anyone help?

    I have just upgraded to OSX 10.6.8 and now I cannot open or save PDF files from the internet using either Safari or Firefox. I get a dialogue box saying the QuickTime plugin has failed. Can anyone help?

    Is this what you downloaded: iTunes 10.7?
    When the update fails what if any error report do you get, specifically? Please do this before trying again:
    Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.

Maybe you are looking for