My sistem is asking for a file itunes64.msi in order to install I tunes? where do i find this?

I need to find this file before I can install Itunes, where can I find it?

Sara,
I will start at the beginning of what happens when I try to open a PDF.
1.       A screen pops up that states YOUR TRIAL HAS EXPIRED
a.       Option 1  Subscribe now
b.      Option 2 License This Software
c.       Option 3 Continue Trial (which is ghosted out)
2.       I select License This Software
3.       A new screen pops up with SIGN IN REQUIRED.  This screen shows my email address
a.       Option 1 Back button
b.      Option 2 Sign In.
4.       I select Sign In.
5.       When I select sign in a screen pops up with Serial Number
6.       There are 6 blank boxes with 4 spaces available in each box.
Please let me know if there is anything else I can do.

Similar Messages

  • Cannot find serial number for existing LR 5 in order to install LR 6. where can I find it?

    where can I find the serial number for an existing installed version of LR 5?

    Trials do not have serial numbers, so if you have a serial number you oughta try it and see.  If you use a serial number on a trial version it will activate it to full version status.

  • I'm trying to "open"-get to a site--Ichoose Firefox as application; the next screen is another appication and asks for a file name. What do I do? I never get any further.

    I'm trying to get to "www.enoriver.org." A window appears asking me to choose an application--I choose Firefox. Then another window opens titled "Another Application" and asks for a file name at the botto0m of page. I choose Firefox from the list of files, paste it into the bar, hit "enter"--nothing happens. What do I do?

    Hi Leo! If you can stop these down load managers, you will be my hero.
    Dokie!!
    PS I have tried my best to warn members here on the forum, but I haven't got a lot of support so far.
    I have my figers crossed that the new team will get-er-done

  • Keeps asking for rpt file when executing store procedure

    Hi all,
      I have coded an standard stored procedure but when I execute it, Management Studio keeps asking for .rpt file to save the results. I am using Enterprise 2008 R2. 
    This is the code:
    USE [mydatabase]
    GO
    SET ANSI_NULLS ON
    GO
    SET QUOTED_IDENTIFIER ON
    GO
    ALTER PROCEDURE [dbo].[usp_chart](
    @parameters)
    AS
    BEGIN
     SET NOCOUNT ON;    
     DECLARE @query NVARCHAR(4000)
        DECLARE @total INT
        DECLARE @strDescriptor NVARCHAR(4000)
        DECLARE @dsvalues NVARCHAR(4000)
        DECLARE @strCache NVARCHAR(2000)
        SET @strDescriptor = dbo.udf_chart_derived_descriptor_intotemp(@derivation_Id)
     SET @dsvalues =  dbo.udf_chart_derived_dynamic_query_fortopn(  @derivation_Id,
           @cache_Id,
           @topn,
          @flt_customer_Id,
          @flt_user_Id,
          @flt_datefrom,
          @flt_dateto,
          @product_Id
        SET @strCache = 'SELECT top ' + @topn + 'PERCENT g.Supplier_Id Supplier_Id 
    INTO #T_CacheTopN
    FROM T_CacheSupp g 
    WHERE g.Cache_Id = ' + @cache_Id + 
    ' ORDER BY g.Position'
        IF @strFilter is null 
         BEGIN
    SET @query = @strCache + ';' + @strDescriptor + ';' +
    'DECLARE @total INT;' +
    @dsvalues +
    'SELECT @total = COUNT(*)
     FROM #T_Condition; 
     SELECT c.Condition_Index, ROUND(COUNT(*)/CAST(@total as float),2)*100
     FROM #T_Condition c
     GROUP BY c.Condition_Index';
         END
        ELSE
         BEGIN
           DECLARE @sqlfilter NVARCHAR(2000)
      SET @sqlfilter =  dbo.udf_chart_dynamic_query_filter_fortopn(@strFilter,@product_Id,@topn, @cache_Id)
      SET @query = @strCache + ';' +@strDescriptor + ';' +
    'DECLARE @total INT;' +
    @dsvalues +
    'SELECT @total = COUNT(*)
     FROM #T_Condition;'+ @sqlfilter +
     ';SELECT c.Condition_Index, ROUND(COUNT(*)/CAST(@total as float),2)*100 
     FROM #T_Condition c LEFT OUTER JOIN #T_NotWanted d
     ON c.Data_Id = d.Data_ID
     WHERE d.Data_Id is null
     GROUP BY c.Condition_Index';
         END 
        EXEC(@query)
        RETURN
    END
    When I execute:
    DECLARE
    @parameters NVARCHAR(4000)
    execute usp_chart_derived_fortopn @parameters
    it asks me for a .rpt file.
    Why is that? I am not running a report.
    Thanks

    As other have said, you have set Results to File.
    But since you posted your code, I had a look at it. I was not able to understand why you use dynamic SQL. For instance, this:
        SET @strCache = 'SELECT top ' + @topn + 'PERCENT g.Supplier_Id Supplier_Id 
    INTO #T_CacheTopN
    FROM T_CacheSupp g 
    WHERE g.Cache_Id = ' + @cache_Id +  ' ORDER BY g.Position'
    Can be written as
    SELECT top (@topn) PERCENT g.Supplier_Id Supplier_Id 
    INTO #T_CacheTopN
    FROM T_CacheSupp g 
    WHERE g.Cache_Id = @cache_Id  
    ORDER BY g.Position
    If you can avoid dynamic SQL, your code becomes easier to maintain, and less vulnerable for nasty surprises.
    And if you use dynamic SQL, you should use sp_executesql and pass parameter values as parameters instead of inlining them.
    Erland Sommarskog, SQL Server MVP, [email protected]
    Links for SQL Server Books Online:
    SQL 2008, SQL 2005 and 
    SQL 2000.
    (Just click the link you need.)

  • Ask for the file name when printing on XP x64

    I have just installed my CS3 on Windows XP x64. Installation was successful and all is working fine. But there are few things which are working differently and I can not find any way to fix it.
    One of the problems I have is that I can not have it so that I will be asked for the name of the PDF file created. It simply goes through and allocates name of the file used for printing. It happens for all applications i.e. Word, Excel, InDesign, Corel. In my automatic processes I realy need to be prompted for the file name / location. Is it possible to modify some settings to have it under XP x64 ??? I hope it is.
    Thanks for advise.
    Tony

    I would like to add few details which may help to find the source of the problem.
    When I will select Adobe PDF as a printer, then click on Properties and select
    Prompt for Adobe PDF filename
    in Adobe PDF Output Folder then printing starts and will not progress at all. If I will change the Adobe PDF Output Folder to local it prints OK but is not asking for the file name / destination.
    How I can have it printing and asking for the file name / destination ? Or maybe on XP x64 it is not possible at all ?
    Regards,
    Tony

  • My computer is saying it can't find the file 'iTunes64.msi' when I try to update or redownload iTunes how do I fix this? I've tried just about everything I can think of. I am using a dell laptop running windows 7 and have tried changing the file loca

    My computer is saying it can't find the file 'iTunes64.msi' when I try to update or redownload iTunes how do I fix this? I've tried just about everything I can think of. I am using a dell laptop running windows 7 and have tried changing the file location to run the update in all of my iTunes files as well as when I've tried reinstalling it.

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
    Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
    tt2

  • I am trying to connect a PC wirelessly to my Mac OS X. The PC finds the Mac but asks for the WEP number. Where do I find this number?

    I am trying to connect a PC wirelessly to my Mac OS X. The PC finds the Mac but asks for the WEP number. Where do I find this number?

    Then use multipel 99 picture slideshows. 
    You can have up to 8 or 9 slideshows per menu.  If you add a sub menu reduce that by 1 and add 8 more to the sub menu.  The top menu can have links to up to 8 or so submenus (depends on the theme) and each submenu can have up to 8 or so slideshows. 
    However, converting a very large slideshow to a QT movie as Terence suggested does not envoke the 99 slide limit in iDVD.  It just becomes a single video/movie file.  So you should not have a problem with exporting at the large size, 720 x 540,
    and dragging the resulting file into the iDVD menu being sure to avoid any drop zones.
    OT

  • File "ITunes64.msi" missing

    Hi,
    When I tried to download the new version of ITunes, the process stopped telling me the file "ITunes64.msi" was missing, so he couldn't uninstall the old version.
    I deleted ITunes in order to re-install it.
    But I still have this problem of missing file.
    I don't have ITunes anymore and I can't install it.
    If anyone can help me to solve this problem
    Thanks in advance

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
    Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
    tt2

  • I´ve installed Photoshop CC 2014 on one computer but when I should install the program on my other computer it ask for a serial number. Where could I find this?

    I´ve installed Photoshop CC 2014 on one computer but when I should install the program on my other computer it ask for a serial number. Where could I find this?

    Hi,
    No serial needed for subscriptions.Your applications can't communicate with the activation server.
    Check and delete Adobe entries on your hosts file as explained on step 3 :
    Sign in, activation, or connection errors | CS5.5 and later

  • I downloaded Aperture 3 from the App Store one year ago, it now asks for a serial number, where can I find this?  Thanks.

    I downloaded Aperture 3 from the App Store one year ago, it now asks for a serial number before I can open it, where can I find this?  Thanks.

    Hi...
    Since it's been a year since you download the app, delete the app then re download.
    Best to use a utility that will not only remove the app but all the associated files > Download AppCleaner for Mac - Uninstall your apps easily. MacUpdate.com
    Then redownload:
    How to re download apps from the Mac App Store:
    Open the App Store. From the menu bar click Store > Sign In
    Click Purchases from the top of the App Store window.
    Select which apps you want to re download. Then right or control click where you see Installed  then click Install.
    Make sure and use the same Apple ID used for the original purchase.

  • How do I delete all existing iTunes software even though  my computer says the setup file (iTunes64.msi) doesn't exist?

    I have had iTunes for a year and I love it, but it kept telling me I had the error (-42408). I searched the support communities to find a solution but none of them worked. So i decided just to unistall all the software and start over, but my computer was telling me that the setup file (itunes64.msi) didn't exist. Again I tried to search the community to solve the problem and I couldnt. So I need to know how do get rid of all the iTunes/Apple Software so I can redownload the new iTunes. HELP PLEASE! I really need help because I have an iPhone too and I can't sync it or put things on it until I can redownload iTunes. HELP!! HELP!! HELP!!

    So i decided just to unistall all the software and start over, but my computer was telling me that the setup file (itunes64.msi) didn't exist.
    (1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the thingy on the Major Geeks page):
    http://majorgeeks.com/download.php?det=4459
    (2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
    (3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
    (4) In the list of programs that appears in CleanUp, select any Bonjour entries and click "Remove", as per the following screenshot:
    (5) Quit out of CleanUp, restart the PC and try another install. Does it go through properly this time?

  • I am using an expense tracker and when I export the file for use it says it is in location /var/mobile/applications/666E-4BC6-8FF1-50CAD35FA541/documents/MyExpenses.csv where do I find this? Assistance greatly appreciated

    I am using an expense tracker and when I export the file for use it says it is in location /var/mobile/applications/666E-4BC6-8FF1-50CAD35FA541/documents/MyExpenses.csv where do I find this? Assistance greatly appreciated

    Attached is Dennis Linam’s Audition – “Log File” and “Log – Last File”
    Contact information Dennis [email protected]
    Previous contact information with your organization (DURIM):
    Dennis - i just finished my audition trial and bought the subscription the 2014 version.
    created by durin in Audition CS5.5, CS6 & CC - View the full discussion 
    DURIM - Okay.  I would expect the "Cache Warning" message because your default directories would not be the same as the ones in the settings file I generated.
    If you go back to the "7.0" directory and open the "Logs" folder, can you copy the "Audition Log.txt" file and send it as an attachment to [email protected]?  We'll take a look in that logfile and see if it gives us more information about why this is failing now.
    Also, do you have any other Adobe applications installed on this machine, such as Premiere Pro?  If so, do they launch as expected or fail as well?
    I do have the trial Pro version of Adobe reader, but I have not activated it, because I fear the same thing will happen did it. I cannot afford to activate the subscription for that product and take the chance of it not working either. I depend on those two programs religiously. Here is the files that you requested. I appreciate any help you can give me to get this audition program started
    Audition Log- file
    Ticks = 16       C:\Program Files (x86)\Common Files\Adobe\dynamiclink\7.0\dynamiclinkmanager.exe
    Sent from Windows Mail

  • HT1923 I can't uninstall or update iTunes. I get an error message that it can't find the file itunes64.msi.

    I can't uninstall or update iTunes. I get an error message that it can't find the file itunes64.msi. where is it suppose to be?

    (1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
    http://majorgeeks.com/download.php?det=4459
    (2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
    (3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
    (4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
    (5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

  • I got my ipod, and my wife, her iphone. I downloaded an app and use it in my itouch, but when my wife download it in her iphone, and the phone ask her to update it, it asks for my apple ID, but she has her own apple ID, how do we avoid this?

    I got my ipod, and my wife, her iphone. I downloaded an app and use it in my itouch, but when my wife download it in her iphone, and the phone ask her to update it, it asks for my apple ID, but she has her own apple ID, how do we avoid this?

    Hi peacemakerco,
    Thanks for visiting Apple Support Communities.
    You can use the steps in this article to sign in on the iPhone with the right Apple ID:
    iOS: Changing the signed-in iTunes Store Apple ID account
    http://support.apple.com/kb/ht1311
    Best,
    Jeremy

  • Hi i need the email of the apple store chicago michigan avenue.  is to ask for a copy of the sales receipt from an iPad and I do not find your mail from anywhere  thank you very much

    hi i need the email of the apple store chicago michigan avenue.
    is to ask for a copy of the sales receipt from an iPad and I do not find your mail from anywhere
    thank you very much
    my mail is [email protected]

    The one on North Michigan Av. ? You'll have to call, I couldn't find an email address.
    Apple Store
    North Michigan Avenue
    679 North Michigan Avenue
    Chicago, IL 60611
    (312) 529-9500

Maybe you are looking for