My Site Settings: Language Options not applied
On a SharePoint 2013 Server I want that the user be able to select is own My Site Language (as SP2010).
So, goingo to: Services Applications > User Profile Service > Setup My Sites:
And checking in the The Language Options checkbox (Allow user to choose the language of their personal site)
The above option doesn't result in any language selection prompt for the user on the My Site creation.
Ideas?
Hi falloutpt,
Based on the following article, user's My Site will be created with default, primary language of the SharePoint Server 2013 installation on the server by default, then user can change his my site to display other language installed, it should be different
from the SharePoint 2010.
http://technet.microsoft.com/en-us/library/cc262500.aspx#mui
"When enabled, users can use the multilingual user interface feature
for their My Sites. This feature is used to display the site's user interface in a secondary language that the user prefers instead of the default, primary language that was selected when the site was created.
By default, when a new site is created, it is created in the default, primary language of the SharePoint Server 2013 installation on the server. A farm administrator must install language packs on the server before sites can be created in languages
other than the default, primary language.
For My Sites, the multilingual user interface feature is controlled by the Language Options setting when you configure My Site settings. The languages that are available to users correspond to the language packs installed in the server
farm. For more information about language packs, see Install or uninstall language packs for SharePoint 2013."
Change and display language should also have changed in SharePoint 2013, user could display the My Site as other languages from IE language settings, which have being installed on SharePoint server.
http://social.technet.microsoft.com/Forums/sharepoint/en-US/6bf98e09-854e-44e8-a606-4f37f37e2993/where-is-the-select-display-language-in-the-ui-of-sharepoint-2013-site?forum=sharepointgeneral
Thanks
Daniel Yang
TechNet Community Support
Similar Messages
-
GPP for Folder Options Not Applying to Windows 7 Current Users
I have a Windows 7 client that I am trying to push a GPP for a folder option. The setting is "Show pop-up description for folder and desktop items".
If a user has already logged into the machine before the policy applied, it will not change the setting.
If a brand new user logs into the machine, the policy is applied.
On users that have logged in previosu to the policy, I can go to the Group Policy folder, check the history folder and I am showing that it is applied in the XML file.
Things I have verified:
Setting is for Windows Vista and Later
Same results on different Windows 7 PCs
Set to run in logged on user context
Apply once and not reapply is NOT checked.
Can anyone help shed some light on this?
Thanks!Hi JiuJitsuJeff,
Sorry for misunderstanding this issue. This GPP for folder option could apply to new users sucessfully, however, could not apply to old users sucessfully. Right?
Firstly, please check if the GPO has applied to old users. You can also run the following command on the problematic workstation when an old user logs on:
Gpresult /h > C:\temp\gpresult.html (“C:\temp\” is the path of the gpresult.html, you can set it yourself). This gpresult.html file is used for checking the result of Group Policy information.
If the GPO setting has been applied according to the result of Gpresult, please check if the value of corresponding registry key has been modified. The corresnponding registry key is shown as following:
HKEY_CURRENT_USER \ Software \ Microsoft \ Windows \ CurrentVersion \ Explorer \ Advanced: ShowInfoTip
If the value is 1, this means the value has been modified. Vice versa.
Regards,
Lany Zhang -
Site Manager Menu option not there
I watched the BC gurus tutorial and looked at online docs. There is no Site Manage> Menu option in the manage area for this site. It makes it impossible to add or modify menus. The Content Holder gives no options to create specifically a menu.
This has to be easy or it is really a bad change. It is easier to develop in DW than BC. That is not good.
I'm the admin and logged in as admin.IF you are a paid partner and set up an account you get everything out the box and you should see menu under the site manager like any other. If you are using a creative cloud site these are ONLY webbasic so you wont see anything other then the real basics.
Like Sanjit has said, if you do not feel this should be the case on that site, contact support. -
Text Caption options not applied
Hi,
I'm trying to add a text caption with a transparent style.
however when I try to modify font, font size, or color no change is
being applied. If I switch to the Adobe Blue caption style I can
modify color, but not font size. Any idea why this is
happening?Hi there
I happened across a weird issue just last night that was resolved by choosing a different ActionScript version. I'm wondering if you can try this to see if there is a change in behavior.
Click Edit > Preferences > Project > Publish Settings and whatever it's set to AS2 or AS3, try the other option and see if it changes your outcome.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks -
Knockout Group option not applied when saving to pdf
Hi!
Been working on a logo that features a realistic looking brushstroke - meaning vectorising the project features hundreds of differently shaded layers. The logo features a flower shape layer that needs to be cut out of the logo.
Question shortly: Is there a way to cut out the outline of the shape on a group that features 'say hundred' layers in different colours (about 30)
I've tried (without a desired result):
- Pathfinder - Minus Front (with click) not working with this group
- Pathfinder - Minus Front (alt/option + click) making it a compound path - not working because it turns the whole group into one colour
- Knockout Group option under opacity settings, which initially worked - but saving the file to pdf, the knockout group option is not working. It's either disabled or the flower shapes as knockout group are white.
Im using Adobe Illustrator CC
Thanks!The "mask" object is not in the "Opacity Mask" thumbnail area in your first image. Make sure you layer the flower above the object(s), select all and choose "Make Opacity Mask" from the Transparency Panel flyout menu. This will make the top-most object a mask. You'll need to then turn OFF "clip" so the portion outside the mask is visible.
Should look something like this:
You can have more than one item on the Opacity mask and of different values. Color is ignored.
Please note: When first creating an Opacity mask AI will only recognize the top object (or compound shape). Thereafter, you can edit and create objects on the mask at will, just like working in normal mode. By default only the mask's "effect" is visible. To view ONLY the mask OPTION+Click the Mask thumbnail. -
Cumulated option not applied to Results
Hi,
We are trying to design a format with years in column and projects in row and we want user to switch from non cumulative to cumulative (we are using BI 7.0; SAPGUI 640)
In non Cumulative
...............2008.....2009......2010.....2011
Project A....5..........10........ 2...........1
Project B....2..........3..........1............6
Result .......7.........13.........3............7
When activating "Cumulated" with option "Calculate Along the Columns" we obtain :
...............2008.....2009......2010.....2011
Project A....5..........15........17...........18
Project B....2..........5..........6............12
Result .......7.........13.........3............7
The problem is that we would like Results to be also in Cumulated but the "Also Apply to Results" cannot be checked and even when we put that in Query designer it has no effect on Results
We need to obtain this (in BW 3.5 it was working as expected using the cumulative output on Fiscal Year):
...............2008.....2009......2010.....2011
Project A....5..........15........17...........18
Project B....2..........5..........6............12
Result .......7.........20.........23..........30
Thanks in advance for your help, we have tried everything but impossible to obtain what we had in BW 3.5.We have put the Cumulated and Sum in the Query, when you run directly the query it works. But if in Properties you uncheck Cumulated to get non cumulative value if you want to apply again Cumulated, Result are again not correct.
Is there any known problem? -
Why is there no email option under site settings in the Business Catalyst Dashboard?
I have pushed a site live, and it has propegated, and looks fine on the Internet, but there is no email option under site settings in the Business Catalyst Dashboard as the tutorial and help screen said there would be.
The domains all look correct, and there is an MX record as well. Did email get moved to another screen, or is there something wrong in my setup?On the page found at ttp://helpx.adobe.com/business-catalyst/partner/setup-pop-imap-email-accounts.html
it says that there should be a "users" field under "Site Settings," and that is where email accounts are set up. There is not, any more than there was a "email" field as referenced in the tutorial (as you can see from the screen shot above). I can no longer correspond with Adobe, since my primary email address on file with Adobe was with the domain that was transferred to Business Catalyst. -
Date format does not change with the Regional and Language Options in 2008
I have a one-column report that was created using the SQL "select current_date" in postgres. (Thinks select getdate() ).
In Crystal Reports XI when I change the "Standards and Formats" of Regional Options to:
English (United States) the date is in the format mm/dd/yy
English (Canada) the date is in the format dd/mm/yy
Japan the date is in the format yyyy/mm/dd
In Crystal Reports 2008 when I change the "Standards and Formats" of Regional Options to:
English (United States) the date is in the format mm/dd/yy
English (Canada) the date is in the format mm/dd/yy
Japan the date is in the format mm/dd/yy
It doesn't change. Is this a bug?
Thanks in advance,
Jhey Jason,
i am going through some of the old forum posts and saw that no one replied to your language options post.
for cr 2008, there are language packs for the applicable languages. there are advantages for this as you can save installation space with the option of installing language packs for each language that you want the designer application to be in.
you have seen the disadvantage as it doesn't work the same as before.
you do not need the language packs for testing though. in the crystal reports View menu, switch up to the Product Viewing Locale to test objects which are using "system" settings such as dates.
if you do wish to install any language packs so that you can change up the actual language in the designer, go to your install media. in the install files "\package\langs\" directory, you will see a folder for each language that you need. install the desired language(s).
once you have installed a language pack and then restart the cr designer, you will now have the additional language in the View > Product Locale.
so in summary...Product Locale will change the language of the whole designer...language packs are needed for this.
Preferred System Locale can be used to test languages without having to change your windows system settings.
i hope that this helps,
jamie -
Default Domain Policy Not Applying Settings to Servers or Clients
I have 2008 R2 DC's with a functioning level of 2003. Our domain servers are a mix of 2003, 2008, 2008 R2, and 2012 and our clients are a mix of Windows 7 Pro and Windows 8.1 Pro.
I recently made a change to the Default Domain Policy located at Computer Configuration -> Policies -> Windows Settings -> Security Settings -> Local Policies -> Security Options
For the Security Policy setting called: Network security: Configure encryption types allowed for Kerberos
The change was to enable DES because of a specific need that I have with an application that I work with but enabling DES and leaving the other options such AES unselected caused other applications to not work right. I decided to revert the changes
back to "Not Defined" but those changes did not reflect on the servers even after running the gpupdate /force command.
In order to keep the application working that broke, we enabled all of the encryption levels such as DES, AES, etc. on the server that's running the application via it's Local Security Policy as a temporary fix.
Now, I want to make sure all servers receive the settings from the Default Domain Policy and have their Local Security Policies reflect the "Not Defined" setting but it's not applying. It seems like they worked when I first applied them but
when I try to remove them it does not work.
If I change the setting directly on the Local Security Policy on the server or clients it shows "No minimum" instead of "Not Defined" which I've heard can be fixed by identifying the registry entry for that setting and deleting it...so
help with the location and how to identify that key would also be helpful.
My goal is not to manually have to change servers and clients to revert back to their default settings...I want the Domain policy to apply and override the servers and client's Local Security Policy.
Any help with this would be greatly appreciated and thank you in advance.I have 2008 R2 DC's with a functioning level of 2003. Our domain servers are a mix of 2003, 2008, 2008 R2, and 2012 and our clients are a mix of Windows 7 Pro and Windows 8.1 Pro.
I recently made a change to the Default Domain Policy located at Computer Configuration -> Policies -> Windows Settings -> Security Settings -> Local Policies -> Security Options
For the Security Policy setting called: Network security: Configure encryption types allowed for Kerberos
refer:
http://technet.microsoft.com/en-us/library/jj852180(v=ws.10).aspx
We needed to implement a similar scenario a few years ago (when we introduced Windows7 into our estate).
We had an SAP/NetWeaver implementation which always worked on WinXP, but failed on Win7.
We had to enable the DES ciphers, since those were disabled by default in Win7. We discovered that we also needed to enable all the other ciphers (those which are enabled by default[not configured]).
i.e., when we changed the setting from "Not Configured", enabled DES, and left the RC4/AES stuff untouched by us, the RC4/AES stuff attracted a status of disabled.
So, we had to set the DES ciphers to Enabled, and, also set the RC4/AES ciphers to Enabled - this gave us the "resultant" enablement of the default stuff and the needed change/addition of DES.
When you set a GP setting "back to Not Configured", depending upon the setting *AND* the individual Windows feature itself - one of two things will happen:
a) the feature will "revert" to default behaviour
b) the feature will retain the current configured behaviour but becomes un-managed
In classic Group Policy terms, condition (b) above is often referred to as "tattooing", i.e., the last GP setting remains in effect even though GPMC/RSOP/etc does not reveal that to be the case.
(This is also a really good example of not doing this sort of stuff in the DDP. It could have borked your whole domain :)
What I'd suggest, is that you re-enable your ciphers for KRB settings again - this time, enable all the ciphers that would normally be "default", let that replicate around, and allow time for domain members to action it.
Then, set the setting back to Not Configured. This way, the "last" settings issued by GP will be those you want to remain as the "legacy".
Note: the GP settings reference s/sheet, has this to say:
Network security: Configure encryption types allowed for Kerberos
This policy setting allows you to set the encryption types that Kerberos is allowed to use.
If not selected, the encryption type will not be allowed. This setting may affect compatibility with client computers or services and applications. Multiple selections are permitted.
This policy is supported on at least Windows 7 or Windows Server 2008 R2.
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!) -
Master pages not applying to site and subsites
I am having an issue with a master page not applying to a site and subsites. The site is created using the community template and has the following hierarchy:
TopLevel: SharePoint Central - server/SPCtrlv2/sitepages/welcome.aspx (webpart page)
subsite1: Community - server/SPCtrlv2/community/sitepages/categories.aspx (community template)
subsite2: Learn - server/SPCtrlv2/learn/pages/default.aspx (publisher template)
subsite3: Showcase - server/SPCtrlv2/showcase/default.aspx (blog template)
The community site was created and then the Welcome page was changed to point to the Welcome.aspx location. (not sure if that matters) When making the application from the top level via Site Settings > Look and Feel > Master Page > dropdown from
Site Master Page (SPC_Global), the master is only applying to the Learn sub site. In SP Designer, the master page/ css files are not showing although they are on the site. (Using designer 2010)
I was able to apply the master with no problem when the top level used the publisher site template. Unfortuately, the community template is not available at the sub site level so we created a new site with the community template at the top.
Any guidance you can provide is much appreciatedHi,
According to your description, you want to apply master page to all sub sites.
Did you use SharePoint 2010 or SharePoint 2013?
If you use SharePoint 2013, you may need to use SharePoint Designer 2013 to find the master page file.
For applying master page to all subsites, I suggest you do as the followings:
1. Make sure you have enabled the “Reset all subsites to inherit this site master page setting” in the Top Level “site
setting”->”site master page setting”.
2. Check whether you have enabled “Inherit site master page from parent of this site” in the “site setting”->” site master page setting” of each sub site.
There are some detailed articles for your reference:
http://davecoleman146.com/2011/06/28/apply-master-page-for-all-subsites-in-sharepoint-2010/
http://msdn.microsoft.com/en-us/library/office/jj862339(v=office.15).aspx
Best regards
Patrick Liang
TechNet Community Support -
X11 Keyboard Settings Not Applied on Boot
I'm having problems setting my keyboard layout on boot in X11 using Xorg.conf.d. Specifically, I would like to set the default X keyboard to be Programmer Dvorak on boot with the caps:swapescape option on. I have followed the instructions on the Wiki for setting the default X keyboard; however, on boot the caps:swapescape option is applied but otherwise the layout is the standard US QWERTY layout. Setting the keyboard manually using the following command always works:
setxkbmap us -variant "dvp" -option "caps:swapescape
Here is the relevant Xorg.conf.d (10-keyboard.conf) file:
Section "InputClass"
Identifier "Keyboard Defaults"
MatchIsKeyboard "yes"
Option "XkbLayout" "us"
Option "XkbVariant" "dvp"
Option "XkbOptions" "caps:swapescape"
EndSection
The other thing that is strange is that the output of setxkbmap doesn't change between boot (incorrect keymap) and when the keymap is set manually.
$ setxkbmap -query -print -verbose 10
Setting verbose level to 10
locale is C
Trying to load rules file ./rules/evdev...
Trying to load rules file /usr/share/X11/xkb/rules/evdev...
Success.
Applied rules from evdev:
rules: evdev
model: evdev
layout: us
variant: dvp
options: caps:swapescape
Trying to build keymap using the following components:
keycodes: evdev+aliases(qwerty)
types: complete
compat: complete
symbols: pc+us(dvp)+inet(evdev)+capslock(swapescape)
geometry: pc(pc104)
xkb_keymap {
xkb_keycodes { include "evdev+aliases(qwerty)" };
xkb_types { include "complete" };
xkb_compat { include "complete" };
xkb_symbols { include "pc+us(dvp)+inet(evdev)+capslock(swapescape)" };
xkb_geometry { include "pc(pc104)" };
rules: evdev
model: evdev
layout: us
variant: dvp
options: caps:swapescape
Any pointers in the correct direction would be greatly appreciated.I remember having had the same issue with Gnome which ignores the settings in Xorg.d completely. I would assume the same for Xfce although not for WMFS.
Does this help?
https://bbs.archlinux.org/viewtopic.php?id=154983 -
Group policy Preference - Internet Option setting not applying
Hi,
I’m not very sure if any of you have encounter this strange issue when
configuring GPP -> Internet option setting for window 7 IE9 or IE11.
The following
are spec of OS and IE version used in my environment.
Window Server
2012 R2 (IE 10)
Window 7 (IE9
and IE11)
Recently I
have deployed proxy setting via GPP as I do not have IEM under my GPMC console.
Once the setting is been configured and deployed, I have notice that the GPO do
not apply after the user login. The following scenarios is what we observed.
1) User boot up the machine, Login and proxy setting will not applied
1a) gpupdate /force -> Proxy Settings applied
1b) setting will be removed after the GPO refreshed
2) User boot up the machine, Login and proxy setting will not apply
2a) User logoff and login proxy setting applied.
2b) Setting will be removed after the GPO refreshed
Kindy advise
if there is any solution to ensure that the setting apply whenever the user
login and stay intact even after the gpo refreshed by itself.Hi,
>>1a) gpupdate /force -> Proxy Settings applied
>>1b) setting will be removed after the GPO refreshed
Based on the description, we can run command gpresult/h report.html to collect group policy result reports to compare how the settings are being applied.
Besides, have we installed the following hotfix on the computers with IE 9? If not, we can try to install the hotfix.
Internet Explorer Group Policy Preferences do not apply to Internet Explorer 9 in a Windows Server 2008 R2 domain environment
https://support.microsoft.com/en-us/kb/2530309?wa=wsignin1.0
Best regards,
Frank Shen
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] -
I recently bought a new macbook and installed Acrobate Pro. My settings/preferences did not come over and I do not have the same style options for my signature. It now only allows me three options and the style I have been using for the last year is not there. How do I add additional options and get my preferred signature style back?
Hi Amanda ,
Which version of Acrobat are you using?
Which signature style are you talking about?
You can go ahead and try uninstalling and reinstalling it and see if that works for you .
Use the cleaner tool to uninstall it .Here is the link.
Download Adobe Reader and Acrobat Cleaner Tool - Adobe Labs
You can refer to the following link to re install it .
https://helpx.adobe.com/acrobat/kb/acrobat-downloads.html
Regards
Sukrit Dhingra -
CSS not applying to a page if navigated to from one other page in the site
Hi,
Quite new to dreamweaver. Built a site a few months ago and when updating the content I decided to update the style as well using the CSS sheet.
Strange problem occurring....
When you navigate to the Contact Us page directly via URL or any but one page in the site, the SCC applies and webpage displays well.
However, if you navigate to the Contact Us page form the About Us page then all styling is lost.
Below is my NavBar coding. I have compared it on all pages and it's the same. Can't work out why CSS not applying in this one specific instance.
<nav id="mainnav">
<ul>
<li><a href="index.html">Home</a></li>
<li><a href="TheCollection.html">Collection</a></li>
<li><a href="News.html">News</a></li>
<li><a href="About.html" class="thispage">About Us</a></li>
<li><a href="Contact.html">Contact Us</a></li>
</ul>
</nav>
Any advice appreciated and let me know if I can provide anything else that might help you to help me.
Thanks!
SHow many style sheets do you have for your entire site?
You should have boilerplate.css, your fluidGridLayout.css (whatever you named it) and one other custom css file for your content styles. All 3 style sheets should appear on every page. For site management reasons, I usually put my CSS files into a styles folder.
Sitename (C:\sitename)
index.html
about.html
contact.html
etc...
-styles
boilerplate.css
layout.css
custom.css
With that structure above, your links to external style sheets should look something like this on every page.
<link href="styles/boilerplate.cssview-source:http://www.theseasonhats.com/keysheet.css" rel="stylesheet" type="text/css">
<link href="styles/layout.css" rel="stylesheet" type="text/css">
<link href="styles/custom.css" rel="stylesheet" type="text/css">
Nancy O. -
Custom settings of Edit-in Preset not applied to image in PS
I am having a problem with my custom made EDIT-IN Preset. While clicking on it launches the image (dng, psd or tiff) in PS, the custom settings of the preset (in my case: 8bit, sRGB) are not applied to the image. Instead the image is opened in PS with the default settings as specified in the Preference menu (in my case: 16bit, ProPhoto RGB).
I am running LR2.2 & PS CS3 (10.0.1) on a 64bit Windows Vista Business machine.
The settings of the preset are:
Application: Photoshop.exe
File Format: TIFF
Color Space: sRGB
Bit Depth: 8 Bits
Resolution: 240
Compression: None
By the way, this problem occurs also on my 32bit XP-Pro Computer.
Any helpful suggestions?
MikeHi,
I think you are running same problem as described in the following article:
http://support2.microsoft.com/kb/2894518
Updates trigger multiple boot is caused TS failing.
Maybe you are looking for
-
How to generate XML Publisher report from PLSQL Stored Procedure in APPS
Hi, I have concurrent program of type PLSQL Stored procedure.I need to generate XML Publisher report from the same.I have changed the output of the concurrent program as "XML" but when I tried running it,the XML tags are not generated.Due to this I a
-
Xcode crashes when doing a distributed build
Xcode crashes when attempting to do a distributed build. UNCAUGHT EXCEPTION (NSInvalidArgumentException): *** -[__NSCFString rangeOfString:options:range:locale:]: nil argument UserInfo: (null) Hints: None Backtrace: 0 0x00007fff8eaba26a __exceptio
-
Hi~~ Is it any solution for using LabVIEW to write a program to display the webpage, I mean I need to have a URL Address bar and a screen use for display the website. the screen size can adjust in the program. is it possible to do so? please help~~ t
-
How to have posted images display as sRGB on wide-gamut monitors.
I understand an sRGB profile is necessary for posting images but I need help on how to do that with Photoshop CS2 and my new wide-gamut monitor (HP LP2475w with Spider3Express calibration). Before doing a "save for web" and posting, I "convert to
-
The screen on my Mac Book Pro has gone black. It has a cursor that responds to touchpad, but is otherwise completely black.