My sound has gone a wall , I've tried everything including a total reset . However the sound does work with head phones , any ideas ?
My sound will not work , I've tired all the simple stuff, including total delete and reset everything . Sound however does work with headphones . Any suggestions ?
http://www.atreks.com/app-no-sound-on-ipad-4-%E2%80%93-what-to-do/
Cheers, Tom
Similar Messages
-
I keep getting a message that my ID has been disabled when trying to download an app. I have changed password with apple. Any ideas what is wrong?
If you've changed your password and it still shows disabled then try logging out of your account on the iPad by tapping on your id in Settings > iTunes & App Stores and then log back in and see if that 'refreshes' the account on it
If that doesn't fix it then you might need to contact iTunes Support : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page -
I have no sound on my iPad for games, YouTube etc I have tried a few things from other blogs to no avail.
http://support.apple.com/kb/HT4085 particularly the latter part
-
My sound only works with my headphones any ideas?
I am only getting sound with my IPAD when i used the headphones.
Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Check your settings. The iPads have a small switch on the right edge. It can be used as a rotation lock to keep the screen from automatically reorienting itself as you move around, but you need to have the tablet’s settings configured properly. That same switch, right above the volume buttons, can also be set to function instead as a mute button to silence certain types of audio.
If the switch is set to work as a mute button, you can change its purpose to “screen-rotation lock” by tapping the Settings icon on the home screen. On the Settings screen, tap General on the left side, and on the right side of the screen flick down to “Use Side Switch to.” Tap to select Lock Rotation or Mute to set the button’s function. Even if you set the side switch for your preferred use, you can still mute the Mini or lock the screen. Just double-click the Home button, and when the panel of apps appears along the bottom edge of the screen, flick the row from left to right with your finger. Tap the icon on the far left side of the row to either lock the iPad’s screen or mute the iPad’s alerts, notifications and sound effects. Music, podcasts and video are not muted unless you turn the volume all the way down.
iPhone: Can't hear through the receiver or speakers
http://support.apple.com/kb/ts1630
http://www.atreks.com/app-no-sound-on-ipad-4-%E2%80%93-what-to-do/
Cheers, Tom -
my ipod nano 4th generation, volume varies greatly when its connected to a jack lead, the lead has been changed still same, it dosnt do it when connected to earphones, it has just started doing this after 3 years, could it be a dirty or damaged connection into bottom of ipod? im at a loss please help if you can guys
Yes but there's no point doing it here. As the Terms of Use make quite clear this is a User to User forum. It's Users like you talking to other Users. It's not a channel to communicate with Apple.
Regards
TD -
I've installed the latest ios 6 however, the sound has gone from all programs , music , youtube any help
iPhone 4, iOS 6
The ringtones are working but all other sounds are not working please helpI had this problem on my iPod Touch 4g. Just press the home and sleep button. Wait and it will give an iTunes and cable logo. Now you can put in DFU mode (Hold Sleep and Home button 10 seconds and then release the power button kand keep pressing on the home button.) Now you will be able to restore it in iTunes.
If you didn't sell it in al this time -
I've installed the latest ios 6 however, the sound has gone from all programs , music , youtube any help
Until you have tried Maps, Music, etc. first hand, I wouldn't formulate negative opinions about them. And updates, if performed correctly, do not erase data.
I presume that last time you updated through iTunes. This time, update over Wi-Fi by going to Settings > General > Software Update. -
Help, please. My iMac sound has gone all stat·ick·y The Video won't play correctly or at all. I have a Model Name:
iMac Model Identifier:
iMac12,1 Processor Name:
Intel Core i5 Processor Speed:
2.7 GHz I am running OSX 10.6.8So just to be clear on a few things:
Should partitioning the hard drive not work is it undoable?
Will this have any impact on doing a complete erase and reinstall and will that restore it back from the process?
Is there a limited amount of space that makes this process ineffective?
I have never had to do this sort of thing so I just want to be sure I don;t wind up in the dog house *)
Thanks again -
my sound has gone out and please don't tell me about PRAM because my MacBook keeps going to the login screen and I can't hear any start up beeps neither someone PLEASE help me
bcoady90 wrote:
My guess is a loose connection.
I suspect you are correct. I would suggest you bring it to a repair facility that may have better diagnostic tools, preferably an Apple store genius bar.
Ciao. -
After getting my screen repaired at apple store, my sound has gone strange.
after getting my screen repaired at apple store, my sound has gone strange. Has anyone else had that problem? how could i fix it? Its harder to hear and it sounds strange.
Hey Paul,
Sadly no, I don't think it will get resolved any time. Do you have the exact same issues?
Please let me know if you solve it. Did you contact Apple support? What did they say?
THanks -
I am getting error (-1) while updating my iPhone 4 to iOS 5.1. The phone has gone into a recovery mode. Restore fails every time at "restoring the firmware" stage. Striped bar remains for a long time, then shows "error (-1)" and the restore fails. I have been doing it for last 12 hours. Help!
Thanks for your reply Michalo. I am in India and here Apple care does not work on Sundays. I have been without my phone for the entire day. Perhaps tomorrow will bring some respite. There is not solution to "error (-1)" on any forum it seems. I found one forum which suggested use of Tiny Umbrella. Any idea about that?
-
When I take my phone off charge in the morning I get an info box on the front which has the sound trumpet icon with a line through it and the word Mute. The only way to get rid of it is to reboot the phone any ideas as to how I can stop this happening?
Hello cor-el, thanks for your reply. I changed my settings for downloads to desktop and it has appeared on there. When I double click I am asked which program I want to open file. I click firefox and another box "opening install" says I have chosen to open the file which is an application and do I want to save it. This is the only real option so I press save file. I get a box saying this is an executable file which may contain viruses - do you want to run. I press ok and the final box showing C drive file name and desktop appears stating application not found.
This happens the same whenever I try to install.
To my untrained eye the application is not being recognised as an application and I cannot work out how to get it to do that.
My plugin is still showing as out of date.
Is there anything you could suggest. Thanks for your time. -
My iphone screen has gone completely blank I have tried holding down both the sleep and home buttons and nothing has happened and I have tried to connect it to my laptop but itunes will not recognise, what can I do ?
have you tried charging the device ?
if so and it still does not work you can try a Forced Recovery..
by holding the HOME button down and plugging it into your computer at the same time..
http://support.apple.com/kb/HT1808 -
My iPad screen has gone black. I have tried resetting it with the sleep and home buttons and it only flashes the apple on the screen for a nano second and then it goes black again. I can even hear notifications arriving, but I cannot see anything...I'd rather not reset it to the factory settings as I have a lot of things I worry about using. Either way seems to me that the system itself is working since I can hear it working, but its the screen that isn't. It has not been dropped and has been in a case for years! Please help!
When the power is on and I press the home button, I can slide my finger where the slider bar "would be" and it makes the noise as if its "opening" flashes a blue screen then returns black...
-
My mac mini only shows a steady power light and fan noise when powered up. No video or sound and no commumication with wired keyboard or optical mouse. Tried replacing internal battery and resetting PMU/SMC but nothing seemed to happen. Any suggestions? Many thanks! Richard
You've already done the two things I would have suggested.
If your Mini has an internal battery then I assume it's a G4. That means you've gotten a lot of good years of service from it, and it's old enough that it's certainly not covered by AppleCare anymore, and it's probably not worth spending money trying to repair it.
You should be able to tear it apart using instructions from ifixit.com to get the hard drive out, and then put the hard drive into a nice USB or FireWire enclosure (I like the ones from Other World Computing, macsales.com) so you can transfer your data to a replacement Mac.
I hope someone has another suggestion for you.
Maybe you are looking for
-
Turning off the compatibility mode by deselecting the check box under each thing that it wants did nothing for my access to the itunes store, still a white page with "itunes store" in the middle of it. This is getting rediculous! Someone with comput
-
Suggestions for optimal solution to load application with dynaminc view
Hi Experts, I have a Web service which is providing me data from database as well as data which will help to create UI of the view. In my view i have to ceate tabs in a tabstrip. Number of tabs are dynamic depending on data from web service. In each
-
I have the original source file for an illustrator image used for a business card. My intention is to bring this image to the web. I would like to make some color changes, is there any way that I can detect or find using the source image the exact f
-
Hi, Im using a lab setup connecting DMPs through a WAN connection.I can PING the DMP IP Address but the DMP is not registering with DMM. Sometimes it comes up and again it comes down. I have attached a screen shot of my DMM applience
-
Ox s lion reinstall now can't connect to Internet
Reinstalled os x lion once finished I was no longer able to connect to the Internet! click on safari icon warning comes up immediately saying safari quit unexpectedly. Click reopen to open application again. And it just brings up another warning box