My system preferences won't load. It opens straight up to the desktop folder and pictures won't load, leaving me with a color wheel. I've tried restarting my computer and that doesn't help. System preferences just won't open/load at all. Any ideas?
My system preferences won't load. It opens straight up to the desktop folder and pictures won't load, leaving me with a color wheel. I've tried restarting my computer and that doesn't help. System preferences just won't open/load at all. Any ideas?
Deleting the System Preference or other .plist file
..Step by Step to fix your Mac
Similar Messages
-
I have a red vertical line on the right side of my screen and it will not go away tried restarting my computer and that didn't help at all, please help me with this problem it is kind of annoying
If it's a thin 1 pixel wide vertical line it's highly likely it could be caused by a defective LCD.
One quick basic way to check is to note the position of the line. Then go to System Preferences, Displays, and lower the resolution. If ther line moves it's on the video and the logic board or video card if fitted is likely to be defective. If the line stays in the same position it's likely to be an LCD fault. Either way to have it repaired you'll need to visit an Apple store or AASP.
The worst offender for this problem is the Late 2006 17" iMac. FOC replacement of the LCD used to be covered by a quality program, but it's now ended.
Steve -
I recently purchased a tv episode from ITunes. It shows that it has downloaded. When I press play it starts to load then immediately returns to the episode page. I have tried rebooting several times.
Basics from the manual are restrt, reset, restore.
Have you tried each of these? -
It wont stay open and Im not sure what to do. I've tried everything I can think of, and I'm in need of getting into my photos
What version of iPhoto? What version of OS X?
As a Test:
Hold down the option (or alt) key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there?
Post back with the result. -
It also doesn't appear when I'm watching videos or listening to music
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync all music and resync
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
I just bought an ipod nano. I cannot sync it . It will say on the screen that it is syncing and that it is finished but then there is not music on it from my computer. Can anyone helo me?
As you connect your ipod to iTunes, an option in the upper right of the screen will appear. When you click this, it will show the different menu for your ipod.
-
What do I do?
Please help!iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Update and restore alert messages on iPhone, iPad, and iPod touch
http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
Cheers, Tom -
syncing problems
That does happen. It depends on how hard the server is being hit, as well as the connection speed of your system. If you are on a windows system, you will want to disable any antivirus or firewall software during the download.
-
BPC MS 7.5 Custom Menu: opening templates NOT in the Company Folder
Hi all,
I've recently started working with Custom Menus, and I've stumbled upon a question: is it possible to open a dynamic template that is NOT located in the Company folder?
I'd like to open a file that lies in a Team Folder, so that only members of that team can open it - and it would be nice if they could open it from their own Custom Menu, but I've found only ways to open templates located in the Company folder, does anybody know a way or a workaround?
Yours, PeterUh, sorry, you're right!
New Thread is found under BPC MS 7.5 Custom Menu: opening templates NOT in the Company Folder
Sorry, Peter -
After upgrading to iOS 5, my iPhone 4 takes a very long time to open digitally signed emails. I've tried with the SMIME settings enabled, but that doesn't help either. Any ideas on how to resolve this? Thanks in advance.
I suspect you may have a corrupt photo or image that is causing the sync to fail or quit. You might want to try removing all of your photos by deselecting them in iTunes then sync - and try adding them by each sub-folders until you are able to nail down which sub-folder of photos, that causes the sync to stop or gives you errors.
-
My iphone won't turn on. I've tried resetting it but that doesn't help, the apple icon comes on then disappears. Please help!!
See this: http://support.apple.com/kb/HT1808
-
My iMac won't boot up. I get only a blank screen w/question mark (?). I tried resetting he pram, but that didn't help. What do I do?
Thanks. Did a safe boot, repaired disk permissions, and took your advice on the combo update.
Running perfectly fine now, if not slightly faster.
For the benefit of others this link: http://support.apple.com/kb/TS2570 will get you to the Apple Support article that covers safe boot and parameter reset in OS 10.4, 10.5, 10.6.
Thanks for all your help and advice. -
Every time I open iPhoto, the program freezes, showing me the spinning rainbow of death. I always need to perform a Force Quit. I have updated my software, but that did not help.
tullch24
Try these in order - from best option on down...
1. Do you have an up-to-date back up? If so, try copy the library6.iphoto file from the back up to the iPhoto Library (Right Click -> Show Package Contents) allowing it to overwrite the damaged file.
2. Download <a href="http://www.fatcatsoftware.com/iplm/"><b><u>iPhoto Library Manager</b></u></a> and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
3. If neither of these work then you'll need to create and populate a new library.
To create and populate a new *iPhoto 08* library:
Note this will give you a working library with the same Events and pictures as before, however, you will lose your albums, keywords, modified versions, books, calendars etc.
In the iPhoto Preferences -> Events Uncheck the box at 'Imported Items from the Finder'
Move the iPhoto Library to the desktop
Launch iPhoto. It will ask if you wish to create a new Library. Say Yes.
Go into the iPhoto Library (Right Click -> Show Package Contents) on your desktop and find the Originals folder. From the Originals folder drag the individual Event Folders to the iPhoto Window and it will recreate them in the new library.
When you're sure all is well you can delete the iPhoto Library on your desktop.
In the future, in addition to your usual back up routine, you might like to make a copy of the library6.iPhoto file whenever you have made changes to the library as protection against database corruption. -
I am trying to switch from video to camera and when I push on the photo button, it remains on video. I've tried turning it on and off, but that doesn't help. Any suggestions?
Tapping the words don't work in iOS 7. Just swipe up or down anywhere on the screen until the mode that you want to use appears in yellow type on the right side. Yellow type indicates the selected mode.
Remember - swipe up or down to get to the mode that you want to use. -
My screensaver seems to be freezing and I can't access Safari. I've tried restarting/shutting down and that doesn't work. Any ideas to help?
Which OS X is installed on your Mac ?
Click the Apple () menu top left in your screen. From the drop down menu click About This Mac. The version is noted there.
Troubleshooting advice can depend on that information.
Maybe you are looking for
-
When using my first generation apple tv and the music search capability, I no longer get a list of options generation when inputing a few letters of a song or artist. In the past (up until a month or two ago) if I input "led" in the search, I would
-
Save as .dmg to Burn on other Mac -- How to?
HOW do I write my DVD to .dmg so I can burn it on my other Mac? My Superdrive is in the shop. I have my project ready to go, and want to DMG it to burn on my other Mac. Is this possible -- HOW? 10.4.3, iDVD 4.01
-
Has anyone been in a similar situation?
Here's my situation: In the past four months, my Powerbook has been posessed by the devil. Not that it hadn't been before..::wipes brow::. New combo drive, new display, new keyboard keys, new logicboard, new..something else that I know I repaired, bu
-
Exporting PCA Reports to Excel
This question is in regards to the report: PCA Report Profit Center Grp: Plan/Actual/Variance - Tcode S_ALR_87013326. When exporting this report to a spreadsheet I'm getting different results in my development environment vs. my production environmen
-
Is there a 64-bit version of elements 12?
I have Elements 12 installed on a 64-bit computer. Elements installed in the x86 folder. I subsequently installed Silverfast for my scanner, and it has both 64 and 32 bit versions. They both install automatically. Elements recognizes the 32 bit plugi