My WiFi is not working correctly.

It will connect but runs sllllllllllllllllooooooooooooooowwwwwwwwwwww if at all. It is not just one spot every time is connects no matter where it does the same thing. Any help would be appreciated.

Hi Jennifer1899 - Let's get you running at top speed! Have you run a speed test app on the device to determine the actual speeds? Does this affect browsing in app and all other applications using data? Try forgetting each of the previous WiFi connections and setup as new network.
Thank you,
YaleK_VZW
Follow us on Twitter @VZWsupport

Similar Messages

Wifi does not work correctly on iPad Mini w/ Retina display

I've found that Wifi does not work properly on the iPad mini w/ Retina display.
Some background: I own three iPads (iPad mini w/ retina display, iPad mini, and iPad 3rd gen), an iPod touch 5th gen, and a Macbook Air, and use them all frequently with my pocket Wifi router.
None of them exhibit any Wifi problems whatsoever except for my iPad mini w/ retina display.
Here are the details:
In the middle of using Wifi with my pocket Wifi router, the Wifi connection will abrubptly drop, then reconnect. After the Wifi reconnects, it is no longer able to connect to the internet (even though Wifi itself is connected).
Once the iPad mini w/ retina display's Wifi gets into this state, the following may or may not restore WiFi temporarily:
Restart the device
Reset network settings
Yet, even if connectevitiy is restored, the problem will happen again within minutes.
When the iPad mini w/ retina display gets into this state, the Wifi on my iPod touch, other iPads, and on my Macbook Air work perfectly fine, so I know the problem is not with my Wifi device or it's connection, but specifically with the iPad mini w/ retina display
Note:
The iPad mini w/ retina display never has any issues with my home or work Wifi networks. The problem only happens when connected to my pocket Wifi device. Yet, all of my other iOS devices and my MacBook Air work perfectly with my pocket Wifi device, therefore I know the problem is not with the pocket Wifi device, but with the iPad mini with retina display.
Solutions:
Resetting the iPad mini w/ retina display to factory settings does not solve the problem
Resetting network settings on the iPad mini w/ retina display does not solve the problem
I have even replaced my original iPad mini w/ retina and got a new one. Yet, the new device exhibits the exact same behavior as the original device.
Conclusion:
I know this is not a hardware problem (since it happened with both my original as well as replacement device).
I know this is not a problem with my pocket WiFi router, since it works perfectly with all of my other iOS devices and MacBook Air.
Therefore, this must be a software / firmware bug with the iPad mini w/ retina display. Apple will need to fix this in a future software update.
Has anyone else seen this problem?

I too have experienced this issue over the past two days... I have a 16gb ipad mini retina, for reference. I bought the device one week ago, and had not experience any issues at all until bringing my device to work. I logged into my work's enterprise level wireless network both yesterday and today, maintained normal wifi capabilities for 2-4 hours each day, and was then randomly dropped, both days. I tried hard resets, resetting my network settings, airplane mode, etc. Nothing has worked. I am still offline on my ipad mini retina.
My iPhone 5 is sitting right next to my iPad mini retina. The iPhone is currently connected to the same very network, and has been for the past two years. I have never lost connection on my iPhone's wifi, just my iPad mini retina.
This must be some kind of bug, as it does not sound like a hardware nor network issue.
Hopefully they fix this in 7.1.

I bought an IPAD air from state and the screen is not working correctly and right now i'm in Egypt ,can i send my ipad to service in Egypt and the warranty will work in Egypt or what?

i bought an IPAD air (32 gb wifi only) from USA just one month ago and the screen is not working correctly(picture attached) and right now i'm in Egypt ,can i send my ipad to service in Egypt and the warranty will work in Egypt or what?

Have you tried a soft-reset to see if that fixes it ? You might be able to get warranty service in Egypt for your iPad, but the warranty includes :
IMPORTANT RESTRICTION FOR iPHONE AND iPAD SERVICE.
Apple may restrict warranty service for iPhone and iPad to the country where Apple or its Authorized Distributors originally sold the device.
As it's wifi-only you should have a better chance of it being serviced under warranty, but there are no guarantees, it might depend upon the repairer.
Egypt authorised service providers : https://locate.apple.com/eg/en/

Wifi Sync not working on iOS 6 and iTunes 10.7 with iPhone 4S

I am running Windows 7 64-bit but WiFi Sync is not working on either my iPhone 4S or my wife's iPhone 4S. Worked fine before upgrading. All settings look correct in iTunes 10.7 and on our iPhones 4S's. Already tried uninstalling iTunes and all associated Apple programs (Bonjour, Apple Mobile Device Support, Apple Application Support, etc) and reinstalling iTunes but no help. Temporarily disabling Norton Firewall did not help. If I hook up either of our two 4S phones via USB wire, they Sync and Backup fine. Just WiFi Sync not working. Can't initiate sync from iPhones because button is ghosted stating it is waiting for PC to be present. Phones don't show up under Devices in iTunes unless hard-wired via USB cable. Any suggestions?

I am getting sync issues too (although on OSX) - seems like others are getting issues too:
https://discussions.apple.com/message/19834721#19834721
Good luck,
Chris

10.9.2 Mail not working correctly

I'm the only person in the office to upgrade to 10.9.2 (thankfully!). Since then, Mail has not worked correctly. It is an IMAP account.
When I click on an existing message in my inbox, instead of displaying instantly it takes 3-4 seconds. The screen scrolls light grey, dark grey, light grey, dark grey then the message. I can live with this but it's very annoying.
But worse, I now cannot perform any mail searches to refer back to existing messages I have in any of my mailboxes. Search functions 'to, 'from' 'entire message', 'any' do not work. Even if the message or sender is in the inbox, it can’t find it. This is serious as I'm constantly using this function.
Many thanks if you can help.
Simon

My wife is having the exact same problem all of a sudden with gmail on her MacBook Air. Also running 10.9.2. Everything is running perfectly on the iPhone, but on the Mac, no new email is downloading and the inbox is not syncing.
Hoping someone can help. Thanks!

Wifi password not working on MacBook Pro

Wifi password not working
I got a MacBook Pro today. The previous owner had Apple wipe it clean for the new owner, me. When I first tried putting my wifi password in, I wasn't remembering exactly what it was, so I tried many different possibilities. Since then, I found my password in my office. I put it in, when it asked for it. But, it's not taking it. It just says searching for networks. And, this is after I identified the correct network. So, I am wondering if perhaps after a number of "tries" does it not accept ANY further attempts ? You know like Banking passwords....you get locked out. I'm wondering if I'm locked out?

No, not like a bank timeout.
Open keychain in your Utilities Folder and look for old router password, or delete wrong passwords.
You can always reset your router password to something new that you can remember.

Mavericks static ip doesn't on wifi does not work

MBA 2011
MAC OS 10.9.4
Wifi does not work with a static IP address.
My wifi access point does not have DHCP enabled, and there is no DHCP server on my network. The internet connection is NOT coming my wifi router.
Every machine on the network has a static ip address and manually configured DNS and GATEWAY to my correct gateway IP. This currently is working on this machine (windows 7), my ipad 2, my xperia phone, my windows xp box, my vista box, and even a virtual pc running windows server which is on my mac.
But the mac won't connect to the internet, or ping anything including the gateway ip address or any other machine on the ip address.
how can i get this mac to have a static ip address without having dhcp

Going to System Preferences -> Network, and selecting Wi-Fi in the left pane.... Questions:
. does the Status in the right pane show connected?
. if so, does the Network Name: reflect the name of the network you assume it should be connected to?
. if so, clicking on the Advanced... button and choosing the TCP/IP tab:
    . is the Configure IPv4 pulldown set to Manuallyh?
    . if so, have you entered in a valid router value (to mirror what you have set on the other working devices), and an IP address which you know is not already in use on the network?
    . if so, when you Ok out of this sheet panel, if you run /Applications/Utilities/Terminal and in that window type "ifconfig" can you find a configured network device with the address information you've entered (likely either en0 or en1)?
If all as anticipated by here:
. what message do you see in the terminal window when you do a ping to the access point's address?
. are you super-sure that address isn't already in use on the network (e.g on a device already on the network successfully and with your MBA's wifi turned off, try pinging the thought-to-be-free address to see if something answers back).

TS4062 Wifi Syncing not working

I have an iPod Touch 4th Gen and it will not let me sync through Wifi

Howdy Rythmwolf,
It sounds like your wifi syncing option is not working correctly. I found this article for you while researching issues with wifi syncing, and want to recommend the troubleshootings steps it has for the issue:
iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi Syncing
http://support.apple.com/kb/TS4062
Here is an overview of what the troubleshooting will entail:
1. Verify system requirements
2. Make sure Wi-Fi Syncing is enabled
3. Quit and reopen iTunes and restart your iOS device
4. Restart your network router
5. Check your network connection
6. Check for network interference
7. Check firewall settings
Thank you for using Apple Support Communities.
Cheers,
Sterling

Sorting not working correctly for date field in alv report

Hi All,
My report displays many rows also containing date type fields of bldat,budat .
When I sort the report selecting field of type bldat budat the sorting is not correct for the year.
Ex:
Invoice doc dat
01-25-2011
01-21-2011
02-02-2011
10-25-2010
11-20-2010
If I use ascending then it is sorted as :
Invoice doc dat
01-21-2011
01-25-2011
02-02-2011
10-20-2010
10-25-2010
Why the sorting is not working correct for year.(2010 records should have been first).
The field wa_tab-bldat is of type char10.
It is populated as wa_tab-bldat = bsak-bldat.
Kindly suggest what can be done.

The field wa_tab-bldat is of type char10
Then what it does is correct.
Refer to type datum...it will work

If statement within a view is not working correctly ?

Hi all,
maybe i am wrong but i think the if statement within a view is not working correctly. See code down below.
I would like to use the Hallo World depending on the page attribute isFrame with or without all the neccessary html tags. Therefore i have embedded the htmlb tags in an if statement. But for any reason if isframe is initial it isn't working. It would be great if anybody could help me.
<%@page language="abap"%>
<%@extension name="htmlb" prefix="htmlb"%>
<% if not isframe is initial. %>
<htmlb:content design="design2003">
     <htmlb:page title = "Top Level Navigation view">
<% endif. %>
hallo world
<% if not isframe is initial. %>
     </htmlb:page>
</htmlb:content>
<% endif. %>
thanks in advance and best regards
Matthias Hlubek

Matthias,
The short answer: your example is <b>NOT</b> going to work. The long answer will probably 5 pages to describe. So first let me rewrite the example so that it could work, and then give a short version of the long answer. Do not be disappointed if it is not totally clear. It is rather complicated. (See the nice form of IF statements that are possible since 620.)
<%@page language="abap"%>
<%@extension name="htmlb" prefix="htmlb"%>
<% if isframe is <b>NOT</b> initial. %>
<htmlb:content design="design2003">
<htmlb:page title = "Top Level Navigation view">
    hallo world
</htmlb:page>
</htmlb:content>
<% else. %>
hallo world
<% endif. %>
So why does your example not work? Let us start with a simple tag:
<htmlb:page title = "Top Level Navigation view">
</htmlb:page>
Now, for each tag, we have effectively the opening part (<htmlb:page>), an optional body, and then the closing part (</htmlb:page>). We are now at the level of the BSP runtime processing one tag. What the runtime does not know, is whether the tag wants to process its body or not. Each tag can decide dynamically at runtime whether the body should be processed. So the BSP compiler generates the following code:
DATA: tag TYPE REF TO cl_htmlb_page.
CREATE OBJECT tag.
tag->title = 'Top Level Navigation view'.
IF tag->DO_AT_BEGINNING( ) = CONTINUE.
ENDIF.
tag->DO_AT_END( ).
You should actually just debug your BSP code at ABAP level, and then you will immediately see all of this. Now, let us mix in your example with our code generation. First you simplified example:
<% if isframe is NOT initial. %>
<htmlb:page title = "Top Level Navigation view">
<% endif. %>
<% if isframe is NOT initial. %>
</htmlb:page>
<% endif. %>
And then with our generated code. Look specifically at how the IF/ENDIF blocks suddenly match!
if isframe is NOT initial.
DATA: tag TYPE REF TO cl_htmlb_page.
CREATE OBJECT tag.
tag->title = 'Top Level Navigation view'.
IF tag->DO_AT_BEGINNING( ) = CONTINUE.
endif.
if isframe is NOT initial.
ENDIF.
tag->DO_AT_END( ).
endif.
You can see that your ENDIF statements are closing IF blocks generated by the BSP compiler. Such a nesting will not work. This is a very short form of the problem, there are a number of variations, and different types of the same problem.
The only way to solve this problem, is probably to put the body into a page fragment and include it like I did above with the duplicate HelloWorld strings. But this duplicates source code. Better is to put body onto a view, that can be processed as required.
brian

** Filtering is not working correctly in ALV (REUSE_ALV_GRID_DISPLAY)

Hi Friends,
We have one Z report that output is displayed in ALV. We are using the standard FM 'REUSE_ALV_GRID_DISPLAY.
We have requirement to remove leading zeros for the field like Material Number (MATNR), Equipment Number (EQUNR) etc. We did the changes by applying the field catalog properties as below.
lw_fieldcat-lzero = space.
lw_fieldcat-no_zero = 'X'.
After this, the MATNR and EQUNR is displayed correctly in the ALV. (Leading zeros are suppressed). But, when we do filter for these fields, in the filter window it displays all the values with leading zeros.
1. We don't understand why it is showing in the Filter widow with all leading zeros. All it shows all the records instead of unique items.
Later on, we removed the above fieldcat coding. Then, we have called the CONVERSION_EXIT routines (in the domain) for the fields to remove leading zeros.
Now, the MATNR and EQUNR is displayed correctly (without leading zeros) in ALV. When we do filter, it is also doing filtering correctly. But, when we do filter which have EQUNR having long values (after zero suppression), it is not working correctly. i.e no items are displayed in the ALV.
Not only for this items. If we filter character columns which have long text, it is not filtering correctly.
2. It is not able to understand why the filtering is not working for long items. But in the standard report, the filtering is working correctly.
We are using SAP ECC 6.0.
Friends, can you clarify the about doubts. It is surprising for me.
Kind regards,
Jegathees P.
Our customer is asked to remove the leading zeros for the numeric field

Hi Clemens Li
I agreed on your point. When we define the Internal table the type for element EQUNR & QUMNR , we are referring the SAP data element for EQUNR, QMNUM field.
Our doubt is even though we refer the standard data element, in the ALV display, it shows with leading zeros and also it creates problems in the filtering and in the filter window all values instead of unique nos.
Hi Abhii
I have given below the fieldcat coding.
Friends, can you kindly clarify the above said problems. Since we use SAP ECC 6.0 any notes or patches apply is required. ( this is the basic functionality in ALV, that is my doubt).
    wls_fieldcat-col_pos   = wpv_pos.
    wls_fieldcat-fieldname = wpv_champ.
    wls_fieldcat-tabname   = wlc_tabname.
wls_fieldcat-seltext_s = wls_fieldcat-seltext_m
    wls_fieldcat-seltext_l = wpv_libelle.
    wls_fieldcat-ddictxt   = 'L'.
    wls_fieldcat-no_out    = wv_no_out.
    APPEND wls_fieldcat TO gt_fieldcat.
Kind regards,
Jegathees P.

Key Figure calculation in Abap is not working correctly - Overlooping

Hi,
I wrote a logic to calculate the ratio of key figure but it is not working correctly
For example I have a requirement to split 1 Product into Several new Products and also the Net Amount will be splitted to these several new products as well. The total Amount of the new product will be equivalent to the Net Amount.
So far my Logic is splitting the product to several new products but the amount is incorrect as the calculation is over looping.
Sample
A PRODUCT has Net Amount 1000. And this product needs to be splitted into 3 new products. Each of this new product is assigned a ratio of 0.3, 0.2 and 0.7 respectively. total sum of the ratio is 1.
PRODUCT1 0.3 = 1000 * 0.3 = 300
PRODUCT2 0.2 = 1000 * 0.2 = 200
PRODUCT3 0.7 = 1000 * 0.7 = 700
The total amount of this new products is 1000.
Now my logic is working this way.
PRODUCT1 0.3 = 1000 * 0.3 = 300
PRODUCT2 0.2 = 1000 * 0.2 * 0.3 = 60
PRODUCT3 0.7 = 1000 * 0.2 * 0.3 * 0.7 = 42
Only the PRODUCT1 is working correctly and there is overlooping for the remaining products
Logic used
DATA: t_data TYPE data_package_structure OCCURS 0 WITH HEADER LINE.
DATA: t_newdso LIKE /bic/newdso OCCURS 0 WITH HEADER LINE.
DATA: t_olddso LIKE /bic/olddso OCCURS 0 WITH HEADER LINE.
DATA: amount LIKE data_package-netamount.
DATA: zidx LIKE sy-tabix.
REFRESH t_data.
LOOP AT data_package.
zidx = sy-tabix.
MOVE-CORRESPONDING data_package TO t_data.
REFRESH t_newdso.
SELECT * FROM newdso INTO TABLE t_newdso WHERE prod =
data_package-prod.
SORT t_newdso BY prod.
*LOOP AT T_NEWDSO.
READ TABLE t_newdso WITH KEY prodh4 = t_data-prod.
IF sy-subrc EQ 0.
    LOOP AT t_newdso.
      t_data-prod = t_newdso-/bic/znew_mp.
      t_data-material = t_newdso-material.
*T_DATA-NETAMOUNT = T_DATA NETAMOUNT * T_NEWDSO-/BIC/ZSP_RATIO.*
      APPEND t_data.
    ENDLOOP.
ELSE.
    REFRESH t_olddso.
    SELECT * FROM olddso INTO TABLE t_olddso WHERE prod =
    data_package-prod.
    SORT t_olddso BY prod.
    READ TABLE t_olddso WITH KEY prodh4 = t_data-prod.
    t_data-prod = t_olddso-prod.
    t_data-material = t_olddso-material.
    APPEND t_data.
ENDIF.
MODIFY data_package INDEX zidx.
ENDLOOP.
REFRESH data_package.
data_package[] = t_data[].
thanks
Edited by: Matt on Sep 27, 2010 2:25 PM - added tags

Hi,
I am not really good at debugging Abap code since I am a newbie. however I have tried to add CLEAR T_DATA before the first loop.
REFRESH T_DATA.
LOOP AT DATA_PACKAGE.
ZIDX = SY-TABIX.
MOVE-CORRESPONDING DATA_PACKAGE TO T_DATA.
and before the second loop and select statement and at the end of the loop.
REFRESH T_NEWDSO.
SELECT * FROM NEWDSO INTO table T_NEWDSO WHERE PROD =
DATA_PACKAGE-PROD.
SORT T_NEWDSO BY PROD.
READ TABLE T_NEWDSO WITH KEY PROD = T_DATA-PROD.
IF sy-subrc EQ 0.
LOOP AT T_NEWDSO.
but then not all data are being fetched.
thanks
Edited by: Bhat Vaidya on Sep 28, 2010 8:33 AM

I have i phone 4s i there is problem of wifi my wifi is not working when i go to the wifi there is no working on off when i update it as a 6.1 ios on that time again it was good but after 2 days again the same problem i am too tired

I have i phone 4s i there is problem of wifi my wifi is not working when i go to the wifi there is no working on off when i update it as a 6.1 ios on that time again it was good but after 2 days again the same problem i am too tired and i also reset network setting but nothing gonna be worked

Sounds like the device was dropped at some point and damaged as a result.
Take it to Apple for evaluation and a replacement.

Email pushing not working correctly for office email - 3 seperate devices/carriers

We switched email hosts several months ago and since our email pushing has not worked correctly. Our host/IT guy has been very unwilling to help me through this (I get the pleasure of being the in-house IT source)
I personally am on AT&T have no problems with the other 3 emails I have set up on my blackberry. However I receive my work account one time a day at roughly 6:15. Another user is on Alltel and he receives spotty emails throughout the day, but his gmail account comes through instantly. The third user is on nextel and he receives his 2-3 times per day.
I began to think this was an email host issue since the three of us are all on different carriers, until I found out a fourth user, also on nextel, receives his emails fine.
Users 1-3 are on Outlook 07 on various versions of the Curve. We have all our messages to stay on the server.
User 4 is on the older nextel blackberry push to talk, and is not on outlook.
We do not have an exchange server. Our emails were all set up through our devices.
Any suggestions? The answers I have received through our carriers is to make sure that our messages are set to be left on the server. Everyone else at the office has given up - but for me this is the quest for the Holy Grail.......I'm determined find the answer!
Thank you in advance for any suggestions.
Caitlin Talbot

Potential solution for windows for a side-by-side install. This works for me.
To setup a firefox install side by side so that links from external programs (like email) can open (so you don't get a "Firefox is already running but is not responding" message) do the following.
The solution entails the use of the -no-remote switch. Don't use it for the default browser. Use it for the non default browser.
I'll use firefox 3.6 and firefox 4.0 as examples but this should work for future versions.
+ Install firefox 3.6 and Firefox 4.0 in different directories. Eg.
C:\Program Files\Mozilla Firefox\firefox.exe
C:\Program Files\Mozilla Firefox 4\firefox.exe
+ Open profile manager. Start > Run : firefox.exe -ProfileManager
+ In profile manager create Two Profiles.
firefox3.6
firefox4
+ In profile manager select firefox 4 as your default (assuming you want to default to the latest) and tick "Don't ask at startup"
+ Create two windows shortcuts.
* General: Mozilla Firefox 4 (default). Shortcut > Target: "C:\Program Files\Mozilla Firefox 4\firefox.exe". Shortcut > Start In: "C:\Program Files\Mozilla Firefox 4"
* General: Mozilla Firefox 3.6. Shortcut > Target: "C:\Program Files\Mozilla Firefox\firefox.exe" -p firefox3.6 -no-remote. Shortcut > Start In: "C:\Program Files\Mozilla Firefox"
That's it. Links from external programs should now open in your default browser.
Further details see. [http://kb.mozillazine.org/Opening_a_new_instance_of_your_Mozilla_application_with_another_profile Opening a new instance of your Mozilla application with another profile]

SSRS 2008 R2/SSRS 2012 Tab Delimited setup is not working correctly in Report Designer

I have changed a RSReportDesigner.config to add a tab delimited option for report export, but it is not working correctly in vs2008/vs2010 report designer. I get a duplicate of CSV (comma delimited) in the export dropdown list.
I have tested SSRS 2008 R2/SSRS 2012 on Windows 7 64 bit professional.
It is working correctly in the report manager.
<Extension Name="TAB" Type="Microsoft.ReportingServices.Rendering.DataRenderer.CsvReport,Microsoft.ReportingServices.DataRendering">
       <OverrideNames>
           <Name Language="en-US">TAB delimited</Name>
       </OverrideNames>
       <Configuration>
           <DeviceInfo>
               <FieldDelimiter xml:space="preserve">	</FieldDelimiter>
               <Encoding>ASCII</Encoding>
               <UseFormattedValues>False</UseFormattedValues>
               <NoHeader>False</NoHeader>
               <FileExtension>TXT</FileExtension>
           </DeviceInfo>
       </Configuration>
      </Extension>

Hi Dave0323,
According to your description, you want to export your report into TXT file and change the delimiter to be a Tab. Right?
In Reporting Services, when exporting to a CSV file, we can change the default field delimiter to any character that we want, including TAB, by changing the device information settings in the configuration file. For example, to use TAB,
update the FieldDelimiter setting to <FieldDelimiter xml:space="preserve">[TAB]</FieldDelimiter>. And we can change the FileExtension to be TXT if we want to export it into a TXT file. So in this scenario, we just need to modify the configuration
file like below:
The result looks like below:
Reference:
CSV Device Information Settings
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

My WiFi is not working correctly.

Similar Messages

Maybe you are looking for