My wired mighty mouse just freezes especially after start-up

My keyboard works just fine. It's just my mouse that keeps freezing especially after my iMac starts-up after shutdown during the night.
Do you have any idea what's wrong?

Mine is doing the same thing. I am completely new to this and thought Apples were more trouble free. That is why I bought one in the first place. I found something about this issue on the support page and downloaded the latest OS and a patch fot the keyboard, to no avail. I have tried all the USB ports with no change. Is there a support number I can call with problems? I haven't found one on the web site. Good luck with your problem and please post back if you get it resolved as I would really like to know what fixes it.
Dan

Similar Messages

Wired Mighty Mouse vs. Wireless Mighty Mouse

Hey, my wired Mighty Mouse track ball just crapped out on me (I can't scroll down anymore) so I guess I am looking to buy another one.
Does anyone have any experience and/or opinions on the Wireless Mighty Mouse track balls being any more reliable or longer-lasting than the Wired Mighty Mouse track balls? Or are they both pretty much the same quality-wise?
Many thanks.

Trust me, copelander, a mighty mouse that will not scroll in one direction is almost always simply dirty. I have two (one BT one wired) each of which I bought very soon after they first came out. Essentially failure to scroll in one direction means that one of the four directional sensors that it relies on has got clogged.
Cheby (above) describes the usual solution very well. Simply disconnect the mouse, hold it upside down, and rub the ball vigorously in all directions on a clean piece of paper. Try to avoid "running over" any of the tiny black specs that will probably appear on the paper , as the ball is good at picking them up again.
If things have progressed beyond the this, the tip of something like the plastic toothpick that comes with swiss army knives, or a cable tie, worked gently in around the edge of the ball, can help, but be gentle so you don't damage the mechanism. Some people also use a dab of isopropyl alcohol on a clean cloth applied to the ball.
To keep your MM running smoothly for a long period, clean it using the "rubbing on paper" trick AS SOON AS you get the slightest sign of bad scrolling, or every few days, whichever comes sooner. Once you have done this for a while you will find that the problem becomes much less frequent, as the internals get rid of any accumalated residual gunk.
People who smoke, and those whose hands get oily or grubby for one reason or another, seem to have more problems with this issue, and might want to think about a regular 'wheel" mouse instead, but I've found that a minute of preventative maintenance every few days keeps my MM's scrolling beautifully in all directions. I haven't noticed any difference in the behaviour of the wireless or wired models in this respect. They both use the same scroll ball mechanism, so this isn't surprising.
As far as choosing between a wired and a wireless one goes for use with an MBP the wired one is lighter, and probably uses less battery than having bluetooth running all the time. On the other hand, the BT one can be handy if you are working in cramped quarters, and don't want a jumble of wire to deal with.
Cheers
Rod
Message was edited by: Rod Hagen

Will any wired MIghty Mouse still work with my G5?

Unfortunately, my Mighty Mouse has reached the impossible-to-clean-trackball-anymore stage. It just won't scroll up anymore.
My current Mighty Mouse dates to 2006 or 2007. I wish I knew the exact model number beyond A1152.
Must I be concerned about what model Mighty Mouse I buy to replace this one? I know they came out with some zoom version. I don't care about the zoom. I just want the basic scrolling (I don't even use the side buttons; just click and scrolling).
Will any model of wired Mighty Mouse be okay?
Thanks so much!

"Unfortunately, my Mighty Mouse has reached the impossible-to-clean-trackball-anymore stage. It just won't scroll up anymore."
Cleaning inside and dismantling the Apple Mighty Mouse
BTW: Before purchasing a new MM, update your OS to 10.4.11 along w/all the updates that goes with it through Software Update.
!http://i50.tinypic.com/izvwo1.gif!

Erratic wired mighty mouse

I've just bought my first Apple MacPro about 6 weeks ago with a wired keyboard and wired mighty mouse. In the last week the mighty mouse has become very erratic in that it acts as if the back button has been pressed when ever the mouse is moved. In other words if I'm working on line and I touch the mouse even slightly the previous web page is brought up.
If use it in explorer or finder it brings up the previous directory.
This problem is present both in Leopard and in Windows XP running in Bootcamp.
Rebooting makes no difference
I've now attached an old Dell Logitech wireless mouse to a usb port and it works perfectly both with leopard and windows.
Any ideas?

I'm going through the same "issue" actually so I hope I can save you some time.
It's a grounding issue. You can experiment:
- Touch your Mac Pro system while you're moving the mouse, or;
- Touch your keyboard while moving the mouse
If the mouse calms down and doesn't try to escape , then you have the source of the problem.
I've read a lot of discussions on this, with people replacing their mice constantly, and even doing a full re-install. So if the above works, then your solution is in figuring out how to deal with the ground-ing problem.
What's more surprising is that Apple hasn't addressed this (it seems) for some time now. With all the gyrations customers go through, you'd think there would have been some type of solution (a recall perhaps?).

Wired Mighty Mouse and right click on my intel imac

Hi,
This is a stumper!
1) Wired mighty mouse stated to lose right click functions. Control click
works fine but right click with menus is gone.
2) Tried steer mouse. No change
3) Deleted hidmouse user prefs. No change.
4) System Archive and install. no change
5) Clean install and Account reinstall (by hand). no change
6) Nuke and Pave. no change
7.) Pram reset. no change
8) Mouse works on other Macbook- not a mouse problem.
9) Second Mighty mouse exhibits the same problem.
10) logging into second account. no change
11) Other 2 button mice work!
12) I like my mighty mouse, but I need right click!!
13) Tried Apple Dev hid driver debug . no change
14) Tried a bunch of other things but this has me stumped....
(and I'm Apple Certified) any other suggeestions or software
I can try? Context plugins are ok...but I'm not sure if there are other prefes to deleted? Also, a totally fresh install should have fixed this...what's going on here? I need to know.

What is strange about my mighty mouse which also experiences similar issues is that you have to be careful where you are pushing it. My right tbutton is set as a control click but if I don't push it in the very upper right hand of the mighty mouse it behaves as a single click. The left hand button, as such, does not seem to be as sensitive to placement as the right hand one. For a long while I could not get it to work at all, until I figured out where I actually had to strike it.
I had never used a mighty mouse until I purchased a new iMac a couple of weeks ago and just figured it was "operator difficulty" as I am far more used to a trackball than a mouse. I may still go back to one if I can't get used to this mouse. I think you really have to put your whole hand over the mouse to make it function properly and I tend not to do that.
Does this help you with your issue? I am not sure, maybe there is some sort of difference in the way the mighty mouse works with new hardware?
Good Luck! Wish I had more to offer other than trying carefully to position your handin difernt places and see if that helps.
Message was edited by: Al Van Malsen

Wired mighty mouse makes clunky noises

Hi, my two month old wired mighty mouse has started making loud clunky noises when I use it and when I press gently on it it seems loose, I can get it to make that noise just by pressing lightly on it. It works fine, it's just not quiet like it used to be and like my old was one for 3 years. It seems like a mechanical problem.
Does anyone know where I might read about this kind of problem and how to fix it and has anyone
else had this happen too?
Thank you,
Martha

Easiest thing to do is contact AppleCare and get it replaced. They'll send you a replacement and then you return the bad one. No waiting or fuss. Usually arrives within a couple of days.

Wired Mighty Mouse cannot scroll down.

I have had my wired mighty mouse since 2007. Every once in a while the scroll would stop working for a second but once i rolled it around, it would start scrolling again. Now my mouse has not been able to scroll down all day. I have read online that if you roll the scroller around on paper, it will clean the roller and it should start working again. I tried this many times and my mouse is still not functioning. Is there a way to fix this or should i just purchase a new one?

You need to open & clean. Watch this video.
http://www.veoh.com/browse/videos/category/technology/watch/v378809PrA5a3pg
 Cheers, Tom

My wired mighty mouse no longer scrolls down - only up and sideways.

My wired mighty mouse no longer scrolls down; only up and sideways. It could be a hardware problem and I guess I should go and by a new mouse but before I do I thought I'd check whether there was any parameter I could change to fix or test this. Anyone else had this problem? Cheers.

Hello and welcome to discussions,
Several ways to cure this one...
http://support.apple.com/kb/HT1537
http://www.mightymouserepair.com/
http://cultofmac.com/how-to-clean-your-mighty-mouse/4946
Any better now?
Regards.
Ian.

Why isn't my wired Mighty Mouse scrolling down?

Some days like right now my wired Mighty Mouse that came with my late 2007 20" aluminum iMac doesn't want to scroll downwards. The scroll ball scrolls upwards and sideways perfectly but doesn't want to scroll down. Why is it doing this? I tried cleaning the area of the scroll ball but still nothing. Please don't say that I need a new mouse.

I have the same problems with my less than six weeks old 24" iMac & two yr old macbook: i always wipe my hands before using them. I have tried most suggestions on this forum and others to no avail.
I could probably get a replacement thru apple care for my iMac, but since the problem is so prevalent, another mouse is not a viable solution.
At this time, I actually prefer using an old cheap wired mouse that was in storage .
To those considering another brand, I had random waking & waking only with restarting issues with a wireless logitech mouse on my macbook.

Wired Mighty Mouse lacks Scrolling Options

Hello,
Is there a way to enable zoom-scrolling on a wired Mighty Mouse?
I was reading Mac Help on mouse settings and noticed a feature that I've never noticed before: Scrolling Options. Help claims that this feature allows to customize the scroll-ball behaviour, including 360 degree scrolling and zoom-scrolling. Alas, I failed to find this feature in my Keyboard & Mouse pane.
I searched on Google, and it seems that this feature was introduced in the new driver that ships on a CD with the new wireless Mighty Mouse. Look here: http://tinyurl.com/pyx7s.
Will this new driver work with the wired Mighty Mouse? if yes, where can I get this driver?
—barmalutka
Mac OS X (10.4.7)

The Zoom function appears to be giving the wireless MM access to the Universal Access System Preference "Zoom" feature.
The MM already has 360° scrolling. I sense that the pulldown menu you see in the System Preference Pane for the new wireless MM probably gives you control to limiting the direction of the scrolling to left-right, or up-down and possibly diagonally.
Who knows, if we are lucky the new MM System Preferences may appear in a future OS X update.
Until then these 3rd party mouse System Prefs are available;
SteerMouse
USB Overdrive

Wired mighty mouse setup.....

Good morning.
Any anybody point me towards basic setup instructions for the A1152 wired mighty mouse (NOT current "magic mouse")?
What do the buttons do singly and in combinations, scroll button antics, etc...........
I haven't been lucky in finding this on the web.
Thanks for your time.

System Preferences>Keyboard & Mouse>Mouse

Mac osx freezes right after start up and all desktop files disappeared and the mouse can't click on anything..help?, Mac osx freezes right after start up and all desktop files disappeared and the mouse can't click on anything..help?

Mac osx freezes right after start up and all desktop files disappeared and the mouse can't click on anything..help?, Mac osx freezes right after start up and all desktop files disappeared and the mouse can't click on anything..help?

This is sometimes caused by Bad Blocks on the Hard Drive.
If 10.7, hold down Command-R at startup, and choose Disk Utility.
If 10.6 or earlier, boot to the Installer/Utilities DVD, answer only the "what language" question and wait for the MenuBar to be drawn. Choose Disk Utility from the Utilities Menu.
Select your Hard drive by Make & Model and check the SMART Status (lower right of the right window). Choose "Repair Disk" . This ONLY examines and repairs the Directory area of the drive, but may improve things a bit. If errors cannot be repaired, you may need a stronger tool, or a new drive.

My computer freezes right after start up

Hello,
I have a macbook pro OS X 10.6.8
I was working on my presentation using keynote.
I had to force quit and shut down the computer while I had my keynote open.
After that, my computer freezez right after start up. I see my background picture and dock and everything. but there is a spinning wheel and I can not click anything. Right now, I am using safe mode to write this.
Also, I can not open my keynote presentation or start new presentation. It says missing font: MarkerFelt-Thin and GillSans and other errors.
I have tried verify disk and repaired disk. But it still freezez. How can I fix this problem?
Thank you!!

Run through this list of fixes, backup your data immediatly.
Step by Step to fix your Mac
Most commonly used backup methods

My laptop freezes right after start up.

I have a Pavillion G6 2232tx laptop which was working fine until yesterday it completely froze. I had to force turn off by holding down the power button. after that it would freeze right after start up. I thought it was a software problem so I deleted the partition reformatted the hard drive, reinstalled windows 8.1 and on the very first startup where windows asks to set the computer's name it froze again.laptop's temperature seems normal, no dust or anything blocking the vents. memory and hard drive both pass the diagnostics test in the bios If any one of you could help me figure out the issue i would be very thankfull. sorry for bad english. it is my third language.

IT turns out there was a problem with the Ralink Wireless card

Backup Freezes shortly after start

I've a recurring problem with Time Machine, whereby the backup appears to freeze shortly after starting. No error message is reported and I can see nothing in the log.
At first it seemed to be caused by my children's log-in still being active but it's not that. It does seem to happen more when my wife has left lots of applications open, including MS Word with lots of documents.
I've checked the external disk (Lacie 500GB), even erased and reformatted it (Mac OS Extended (Journaled), same as by iMac hard disk) but to no avail. Stopping the back-up does nothing. Pulling the cable or turning the disk off whilst kills the current back-up doesn't cure the problem.
The only solution is to restart and run a back-up straight away.
Any ideas?
Steve
8-)

Wackers wrote:
I've a recurring problem with Time Machine, whereby the backup appears to freeze shortly after starting. No error message is reported and I can see nothing in the log.
Unfortunately, a lot of things can cause this.
Let's take a look at the log: there may be a clue. Download the +Time Machine Buddy+ widget from: http://www.apple.com/downloads/dashboard/status/timemachinebuddy.html. It shows the messages from your logs for one TM backup run at a time, in a small window. Navigate to one of these stalled backups, copy and post the messages here (be sure to get them all, as sometimes they overflow the small window).
At first it seemed to be caused by my children's log-in still being active but it's not that. It does seem to happen more when my wife has left lots of applications open, including MS Word with lots of documents.
That sort of thing might slow it down a bit, but shouldn't be much.
I've checked the external disk (Lacie 500GB), even erased and reformatted it (Mac OS Extended (Journaled), same as by iMac hard disk) but to no avail.
Also check the *Partition Map Scheme* shown by Disk Utility on the first line of the drive (the one with the make and size). It should be GUID for an Intel Mac, +Apple Partition Map+ for a PPC Mac.
Is your LaCie Firewire or USB? How is it connected?
Does it have it's own power supply, or does it get power from your Mac?
Are you running FileVault, any virtualization software, or any significant non-Apple software?
How much data is on your internal HD?
That info plus the logs should at least get us started.

My wired mighty mouse just freezes especially after start-up

Similar Messages

Maybe you are looking for