My Z10 is dead after latest OS update
Hi,
I bought my Z10 in June 2013 at Reliance Digital Shop of Gurgaon and it was working fine after i switched using BB Link but 3 days ago I updated the OS with latest offering and then first my password keeper stop working and then from yesterday it stalled with BB logo on screen, i found no solution but only to reload the OS and I did it. Again the password keeper stoped working and asking the password again and again>> today again it stalled with BB logo and I tried to reload the OS again but this time it shows an error message and my Z10 is dead no responses at all.
Please help if at all anything is there the fun part is I am in Japan now and I have to send this stupid phone to India by EMS to get the warranty offer if anything they offer.
This will be my last BB unfortunately and what I guess even 1 billion US$ can't save RIM.
Ciao
Hi and Welcome to the Community!
That is the first I've heard of this issue. You may need to reload the OS. Instructions are in the link below. However, you should probably give your carrier a call and ask to be escalated to BlackBerry Technical Support.
http://www.blackberry.com/btsc/KB33480
VIA | John_Clark
http://supportforums.blackberry.com/t5/BlackBerry-Z10/Z10-stuck-on-start-up/td-p/2190227
If it's still stuck then you could try an autoload instead, a good write up on how to do it is here.
http://supportforums.blackberry.com/t5/BlackBerry-10-OS-Device-Software/Upgrading-OS10-devices-using...
VIA | BBSJdev
http://supportforums.blackberry.com/t5/BlackBerry-Z10/Z10-stuck-on-start-up/td-p/2190227
Please thank those who help you by clicking the button.
If your issue has been solved, please resolve it by marking "Accept as Solution"
Similar Messages
-
iPad mini will not let me access mail after latest software update, 6.1.2, seems to want me to sign in, but whenever I type my Id ad password it just says that the mail account already exists.. Still can't open my mail!
Help would be appreciated.PhotogYogi wrote:
I Have the same issue on a brand new iPad mini 2. My battery is only lasting up to 5 hours. I went on chat with Apple last night and they said my battery is fine and its a Safari issue. I'm literally losing 1% every 3-4 minutes. I tried recalibrating my battery, signing out of iCloud, shutting off all locations, turning off background app refresh, restoring network settings, restoring all, and finally restoring from iTunes with no luck. This is just awful. I got this iPad so I could use it on my long flight for a trip I have coming up, and unfortunately, it's not going to last that long, plus I'm concerned about how many times i will be recharging my battery because of this since battery's do have a life cycle dependent on the number of charges. This is frustrating and needs to be fixed ASAP and addressed by Apple.
By the way, Apple told me to bring my device to the Apple Store because it's still under warranty. That's great and all, but I'm going to waste my time if there is no fix for this issue.
Ok so you want Apple to address the problem, but yet you don't want to take it to them just in case they can't fix it? What if they can fix it? Complaining here certainly won't fix it. -
ITunes won't open after latest OSX update
AFter latest OSX update iTunes won't open. Reinstalled iTunes. Reinstalled OSX update. When I click on icon in applications or in finder nothing happens.
This is what worked for me and others--original post found on this thread: Yosemite slow opening and cannot open itunes
This solved my question by Linc Davis.......
According to multiple reports on this site, Apple Support has given the following instructions to others who had a similar problem. I can't confirm that this procedure works or that it's necessary, but it won't leave you any worse off than you are now.
First, back up all data.
Select the iTunes icon in the Applications folder and open the Info window. Click the padlock icon in the lower right corner to unlock the settings.
In the Sharing & Permissions section, change the Privilege setting for each Name in the list to Read & Write. Close the window. If the settings aren't visible, click the disclosure triangle on the left so that it points down.
You should now be able to drag the iTunes application to the Trash and empty. Your iTunes data won't be affected.
Click the iTunes link at the top of this page, download the installer package and run it.
If iTunes still doesn't launch, or if you can't complete the procedure, reinstall the OS. -
Windows 7PC no longer detects iPad 3 after latest itunes update. Why?,
iPad not appearing in iTunes
http://www.apple.com/support/ipad/assistant/itunes/
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/TS1591
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
iTunes for Windows: Device Sync Tests
http://support.apple.com/kb/HT4235
IOS: Syncing with iTunes
http://support.apple.com/kb/HT1386
Apple - Support - iPad - Syncing
http://www.apple.com/support/ipad/syncing/
Cheers, Tom -
iphone 4 not recognized and will not sync after latest itunes update. I have done recommendedl trouble shooting and uninstalled and reinstalled itunes to no avail. Can I go back to earlier version of itunes or restore computer to fix?
'The installer has insufficient privileges to modify this file C:\Program Files (x86)\Common Files\Apple\Apple Application Support\Web kit.resources\inspector\Images\Spinner Inactive Selected.gif.'
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards? -
Wifi not working after latest iOS update
wif not working after latest iOS update 7.0.4. Any suggestions?
Same happening to my iphone no wifi or bluetooth since latest update tryed everything reset restore reset back to factory setting all to no avail phoned apple they want 155 pound for a replacement (cheeky #$%/$$#@) when everyone knows its there fault .i read phone may need new wifi chip if its out of warrenty cheaper to take to local phone doctor
-
After latest security update my MacBook is not finding any network and I think is not really turning wifi on. Has anyone encountered similar problem?
Checked the older discussion of the same type and found solution, well kind of... Thanks to other people who tried it, I just cannot remember their names at the moment. So, the solution for me was to turn off the firewall in the system preferences and suddenly lo and behold there was my network.
-
My iPhone crashing after latest IOS Update. Screen is not working anymore. I cannot use buttons, the screen is freezing up.Only thing I am able, is to 'restart' the phone. Now it does it after 5 minutes itself! Already removed en reset phone, no success!
Can anyone help me?Hi there Cinthia88,
I would recommend taking a look at the troubleshooting steps found in the article below.
iOS: Not responding or does not turn on
http://support.apple.com/kb/ts3281
-Griff W. -
even after latest soft update i still have apps wating to redownload again
In over three years, I have yet to have a problem or meet someone who has.
Most never have an issue.
As this is a support forum, designed for those with issues, of course you will see problems here ( many self inflicted). If you visit a hospital, you are likely to see many sick people, even though most are not sick.
It is really up to you, but most users never have an issue.
http://tech.fortune.cnn.com/2010/09/23/iphone-tops-j-d-powers-customer-satisfact ion-survey-for-4th-year-in-a-row/ -
Airtunes quit working after latest security update
My airtunes quit working after latest security update. Anyone else experience this problem?
In search of the fix, any help welcome.Had to reset the Airport Express.
-
Garmin GLO portable GPS quit working after latest Apple update
Garmin GLO quit working after latest Apple update ?
I am using Mountain Lion. I reset the system a thousand times. The Mac communicates fine with the printer, that's not the problem. Somehow, recently something changed in the ppd file for the LaserJet 1320 that it simply does not print properly. For instance, I sent a job to print two pages, and use the duplex. The duplex works, but then the other side comes out empty. Is there a place I can find the old - less secure, I don't care, I just want to print - ppd file for controlling the printer? I think the printer only supports certain level of Postscript commands, and the new ppd file expects a new level. This printer is 8 years old after all. If I plug the printer in Linux, it prints the same document fine.
Thanks for any help -
Safari can't connect after latest Lion update
Just updated my software and now safari can't connect to websites. It connects for a bit then after awhile it will no longer connect. Firefox and Chrome are connecting fine so this is a safari only issue with the latest update.
Safari Version 5.1.5 (7534.55.3)
Quiting safari and restarting works for a little while then eventually 'can't connect to server' eventually appears. I'm going back to firefox until this is resolved.Linc Davis
Currently Being Moderated Re: Safari can't connect after latest Lion update
Apr 2, 2012 5:35 AM (in response to rtorca)
Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins and log in as Guest. For instructions, launch the System Preferences application, select Help from the menu bar, and enter “Set up a guest account” (without the quotes) in the search box.
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem(s)?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
Note: If you’ve activated “Find My Mac” or FileVault in Mac OS X 10.7 or later, then you can’t enable the Guest account. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem(s)?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.
Hi I have the same sort of problems I carried out the two tests and the problem appears to only be in my profile not in guest profile. Is there a cure? -
VMware wont start after latest kernel update!
Okay when i went to reboot it went to boot into arch but wile it was loading the vmware modules it would stay stuck at loading vm communication interface socket family and would just stay there the only way i could even boot into arch was to edit my grub so i could login and at least comment out vmware i tried to reapply the vmware patch fix that was on the wiki and had no luck also tried reinstalling + reapplying patch after words and still no luck I'm hoping this is happening to someone else as well and not just me (mean i know lol) I also tried virtualbox but seems it has it's own mess of problems as well after latest kernel update.
I have tried rebuilding the the kernel image and even tried reinstalling grub with no luck. After not having a usable system for several days I ended up just having to reinstall and maybe found out more about the problem. Using the net install image and a 64 bit install this time making a EXT2 boot and a root partition of JFS right after install I get a panic during boot about how the system can't find a valid filesystem on what would be root partition. Even when passing the "rootfstype=jfs" to the kernel line in grub it still errors out telling me that it is "Bailing out, your on your own. Good luck!" (pretty funny error messages if you are not ripping your hair out). After that I redid the install this time making a EXT4 root partition and everything is working.
It seems to me that this all points to a problem with JFS on 64 bit systems, my other systems are all 32 bit and usign JFS root just fine... can anyone else confirm this?
Last edited by vendion (2011-01-12 13:39:56) -
Internet stopped working on MBA after latest firmware update. Help please!!!
Internet stopped working after installing the latest firmware update. WiFi still connects to router, our other mac desktop still connects to internet as usual (same network). I can't even re-install the MBA OS since it needs an internet connection!!!
Any ideas?FIXED.
I swapped our wireless router for a newer one, internet seems to work fine again (we were sent a new one by our internet provider which we never set up until now). -
After latest iTunes update I get error message when syncing:
"iTunes could not sync information to the iPhone "name" because a connection could not be established to the iPhone". Same for my iPad, same for both even after upgrading to IOS6.0. Any ideas?
I tried to carry out a restore on the iPhone but iTunes cannot back it up.
Is the latest iTunes broken? or is it just me?
I am on Windows 7 64 bit, Never had this problem till the latest iTunes update.So I am unclear, did you purchase these songs or import them from a cd?
If you imported them and still have the CD try importing them again and see if they work the delete the others.
Or if you purchased from itunes re-dowwnload and see if they work. Maybe they are corrupted files and this should resove it.
Maybe you are looking for
-
How can I restore a deleted language to Ipad?
I used icleaner (Cydia Tweak) to delete some un important data but it deleted Persian Language. So now I use the keyboard and It doesn't type any word I think the whole language has been deleted from my Ipad (3). How can I restore that language? plea
-
Copying a page from one application to another
Is it possible to copy a page definition to a different application? When choosing "Copy' on the page definition the application# is hard-coded.
-
Hello, I use MAC AIR OSX 10.6.8 and have Adobe CS2, that I was using 2 years ago on my older computer. I stopped using it because it would close down in the middle of work. Now I would like to reinstall it on the MacAir but I can not get it working.
-
I am implementing a milk dispenser with one clerk and multiple customers. Once a customer takes a milk the milk ID cannot be used. the problem I am having is that the IDs are being re-used - probably because of my message queues. Can someone tell me
-
Add multiple records thorough lov, help of one field?
Hi All: Actually, I have a datablock with two fields, one is id, other one is name. I select no of records in datablock is 3.My requirement is, there is should be one field on the above of this block.on this block should be lov. suppose that field na