MySQL - Oracle: files only?

Hi,
I have downloaded MySQL data files from Ensembl (http://www.ensembl.org/Download/) and like to load it into an Oracle database without starting a local MySQL instance.
Is it possible to read the MySQL data files and load it into an Oracle database?
Regards,
Andre

Andre,
The Oracle Migration Workbench works against a live mysql database (with running processes).
Oracle has a tool called sql*loader (sqlldr) for loading flat files into oracle, you would have to configure it and the oracle database depending on the data.
The alternative is to load the data into a mysql database and migrate the 'live' mysql database using the workbench.
Regards,
Turloch
Oracle Migration Workbench Team

Similar Messages

  • Have  a MYSql dump file in *.sql extension

    Hi
    I have a MySql dumped file in *.sql extension.
    I have been reviewing ( maybe cannot see) SQL dev to see if I can use it to migrate the mysql file.
    Is this possible?  I looked at the snippet of the sql file and it has indications to create tables using specific MySQl engines...
    Is connecting to the source db ( MySQL) the only way to do this?
    thanks

    The supported methods of migrating from MySQL to Oracle RDBMS via the SQL Developer tool are discussed in ...
    Getting Started: SQL Developer Migrations
    MySQL Migration
    Even very old versions of SQL Developer (say, version 1.5.5) support migration, but the steps may vary depending on version so it is best to use the latest 4.0.3production release. If your migration is small, then using the Copy to Oracle feature may suffice:
    Getting Started: SQL Developer Migrations

  • How to bulk import data into CQ5 from MySQL and file system

    Is there an easy way to bulk import data into CQ5 from MySQL and file system?  Some of the files are ~50MB each (instrument files).  There are a total of ~1,500 records spread over about 5 tables.
    Thanks

    What problem are you having writing it to a file?
    You can't use FORALL to write the data out to a file, you can only loop through the entries in the collection 1 by 1 and write them out to the file like that.
    FORALL can only be used for SQL statements.

  • How to upgrade from OCS 904 to 10g but not upgrading Oracle Files

    Hi All,
    We have installed OCS 904 from where we only are using:
    - Portal
    - Oracle Files
    Our idea is to upgrade this installation to OCS 10g but keeping the same version of Oracle Files (we don't want to migrate to content services for the moment).
    Is this possible? or if we want to keep Oracle Files we need to do a fresh install of OCS 10g in another location?
    Thanks in advance,
    Harvey

    >I want to upgrade it from RHEL 6 TO  RHEL 7 and from ORACLE 11G TO ORACLE 12C. I wonder if anyone could suggest the best url for for upgrading accordingly.
    which metric measures best? Fewest keystrokes?
    BTW - you are actually doing 2 upgrades. You are upgrading OS & you are upgrading Oracle version.
    So you can either over then up or up then over.
    How much down down time is available?
    How much risk do you want to include?

  • Oracle Files Customization?

    Can Oracle Files be customized with the Oracle Content Management SDK? Specifically I need Oracle Files to work with Oracle Label Security. I also want to drive searching according to document classification level and user classification, show documents they can see, but only showing thematic info for documents they are not cleared for.

    Although Oracle Files is built on CM SDK - we do not support utilizing the CM SDK API against Files.
    Oracle Files has a special FMI Layer that all operations against it work through. By using the CM SDK API you bypass this layer - plus the business logic etc.
    You may want to take a look at using the CM SDK Web Starter Application as a basis for building your own application. CM SDK exposes a much finer grained access control. In particular it distinguishes between obtaining a document's content, versus its attributes / categories etc.
    Even though you may be able to locate a document based on some metadata, you may not have sufficient privileges to view its content.
    [Edited by: mshannon on Feb 10, 2004 7:04 PM]

  • EM Oracle 10g - only primary oracle home discovered

    Hello,
    configuration:
    first server works as primary database
    second server should work as a standby database
    problem:
    we can start 'add standby database', but in step 3 (Standby Oracle Home) only the primary database server is discovered.
    Both machines are identical, same OS and Oracle version.
    tnsping works in both directions.
    Is this a problem with listener/tnsnames configuration, with EM or with the configuration of the standby/primary server?
    Any help will be appreciated.
    Thanks in advance

    windows/system32/drivers/etc/hosts ...
    # Copyright (c) 1993-1999 Microsoft Corp.
    # This is a sample HOSTS file used by Microsoft TCP/IP for Windows.
    # This file contains the mappings of IP addresses to host names. Each
    # entry should be kept on an individual line. The IP address should
    # be placed in the first column followed by the corresponding host name.
    # The IP address and the host name should be separated by at least one
    # space.
    # Additionally, comments (such as these) may be inserted on individual
    # lines or following the machine name denoted by a '#' symbol.
    # For example:
    # 102.54.94.97 rhino.acme.com # source server
    # 38.25.63.10 x.acme.com # x client host
    127.0.0.1 localhost

  • Oracle Files AdminApp

    Hi,
    my single-box installation is almost working 100%, the only part that don't work correctly is Oracle Files. I start Oracle Files like this (as root):
    cd $ORACLE_HOME/ifs/files/bin
    ./ifsctl start
    Running status tells me that it's started:
    [oracle@ocs bin]$ ./ifsctl status
    Oracle Internet File System
    Copyright (c) 2002, 2003 Oracle Corporation. All rights reserved.
    Schema password:
    Domain ifs://xxxxx:1521:ACAIQ:ACAIQFS
    Domain controller
    (runs locally)
    is launched; is started
    ACAIQ
    (runs locally)
    is launched
    In Entreprise Manager, I can see the domain and two components:
    Domain Controller     Domain Controller     The status of "Domain Controller" is up     xxxxx     Yes
    ACAIQ     Node     The status of "ACAIQ" is up     xxxx     Yes
    But I can't connect to the AdminApp located at
    http://xxx:7778/files/app/AdminLogin, and I can't connect to the Portal (/files/app/) either, I get:
    503 Service Unavailable
    What is missing ?

    Oups, I ran the command from Infrastructure instead of Midtier. This is the good one:
    Current State for Instance:ACAIQiAS.ocs.osci.qc.ca
    Component Type Up Status In Sync Status
    ================================================================================
    1 HTTP Server ohs Up True
    2 OC4J_Demos oc4j Up True
    3 OC4J_Portal oc4j Up True
    4 OC4J_UM oc4j Up True
    5 OC4J_iFS_files oc4j Up True
    6 OC4J_imeeting oc4j Up True
    7 home oc4j Up True

  • Changing default Type in Type dropdown of DDL Files only of Generate Server

    Hello,
    When I try to generate a Server Model Definition, the default type of the Type dropdown list of "DDL Files Only" is "Oracle8.1".
    I would like to set it by default at Oracle9i.
    Is that possible?
    Thank you for your answers.
    Nicolas.

    Hello Roel,
    Sorry for replying so late, I hadn't seen your answer...
    I checked the property 'Oracle Version' ans it's already set to "Oracle 9i" ...
    So ? Is it a bug?
    [EDIT] It works when I generate in the "Distribution" tab, but not when I generate in the "Server Model" tab.
    Thank you,
    Nico'
    Message was edited by:
    Nico57

  • [svn] 1267: fixed . patch creation to create patch with the selected files only, remove, fix newlines in the patch file.

    Revision: 1267
    Author: [email protected]
    Date: 2008-04-16 17:02:53 -0700 (Wed, 16 Apr 2008)
    Log Message:
    fixed .patch creation to create patch with the selected files only, remove, fix newlines in the patch file.
    Modified Paths:
    flex/sdk/trunk/tools/diffpack/diffpack
    flex/sdk/trunk/tools/diffpack/readme.txt

    All,
    I thought it may be related to spaces in the path in which the script was called from. I tried having the ODBC command script in another directory but the same thing happens. It will give me the "CONFIGSYSDSN: Unable to create a data source for the 'Oracle in OraClient10g_home1' driver: Could not load the setup or translator library with error code -2147467259". As soon as the script is done running I can manually double click the script and it adds the DSN fine.
    Thanks,
    Clif Bridegum

  • Faults generated by Oracle file adapter not reaching BPEL process

    Hi,
    I have a process that uses the Oracle file adapter to receive the contents of a file, and am suffering from a number of problems when it is not able to parse the source file.
    The process is initiated by a receive activity associated with the file adapter partnerline that has the create instance flag ticked.
    One problem is that if the file adapter encounters an error when reading the file, there is no record of anything happening from the BPEL Console. I presume this is because no instance of the process has been created as the error was encountered before invoking the process. The only record I have of a problem ever occuring is in the logfiles.
    To make matters worse, if you select the Delete files after successful retrieval, the source file is deleted even though an exception has been encountered. If you specify the Archive processed files options, it does not archive the file.
    So to summarise the problems:
    * there is no record of an attempt to read, or of a faulty read occurring when trying to read the file from the BPEL console when a faulty read does occurs.
    * no instance of the process is ever created, so it is not possible to implement a fault handler to send out a notification of the problem.
    * when a problem is encountered, the source file is deleted and not archived.
    I assume that this is a bug, so can anyone advise if there is a patch to address these problems?
    Thanks
    Toby

    Ok, so now I'm using a rejection handler to invoke a BPEL process, and have defined the inputVariable type to be rej:RejectionMessage and imported RejectionMessage.wsdl.
    The process is being invoked successfully, and I can see that the processes input contains data.
    So I am writing the opaque MessagePayload to a file successfully using a file adapter, and can see the file content that is written is as I would expect (it matches the file used as input that would have caused the fault - although the content is truncated).
    Now I want to modify the file adapter so that the file's filename is set to the RejectionId attribute of the BPEL process. However, I'm receiving the following message:
    xpath variable/expression expression "/ns2:RejectedMessage/@ns2:RejectionId" is empty at line 50, when attempting reading/copying it.
    Please make sure the variable/expression result "/ns2:RejectedMessage/@ns2:RejectionId" is not empty.
    I can see from the console that the RejectionId is in fact populated, and the copy from the RejectionMessage's MessagePayload is completed ok.
    Does anyone know what's going on here?
    Thanks
    Toby

  • Different from Oracle file

    Hi,
    I am getting the below  error in my system in db check .
    Detail log:                    cefatfts.chk
    command_line                   brconnect -u / -jid CHECK20101006090000 -c -f check
    alert_log                      G:\ORACLE\SID\SAPTRACE\BACKGROUND\alert_SID.log
    BR0286W Size 1972764672 of file H:\ORACLE\ SID \SAPDATA4\PRDUSR_2\PRDUSR.DATA2 is different from Oracle file size 482353152
    BR0280I BRCONNECT time stamp: 2011-01-19 09.00.30
    Googleit and found the below link
    Backup Error "Return Code 0001 Success with warnings"
    in this they Just Extend the datafile to update the control file
    So i use ALTER DATABASE DATAFILE 'DATAFILE' RESIZE 'NEW SIZE'
    Can this solve my error Please suggest and what command and precaution do I have to take.
    Regards,

    Hi,
    Sorry for that I will  have closed the one post. As suggest i have cheeked the sap note and find only one note 1137346
    in that
    BR0286W Size of file %s is different from Oracle file size.
    BR0286W Größe der Datei %s ist verschieden von Oracle-Dateigröße.
    Explanation:  The file size in the file system is different from the file size saved in the ORACLE dictionary (in the control file). The file may be corrupted.
    Program reaction:  The program tries to save the file.
    User action:  Check your disks, the file system (file system check), and the ORACLE ALERT file. If you discover errors, you may be able to correct the situation by performing a recovery. Contact an ORACLE specialist before you start a recovery.
    Need to know the steps as suggest
    in this they Just Extend the datafile to update the control file Can this solve my error
    Regards,

  • I am receiving the data through the rs232 in labview and i have to store the data in to the word file only if there is a change in the data and we have to scan the data continuasly how can i do that.

    i am receiving the data through the rs232 in labview and i have to store the data in to the word or text file only if there is a change in the data. I have to scan the data continuasly. how can i do that. I was able to store the data into the text or word file but could not be able to do it.  I am gettting the data from rs232 interms of 0 or 1.  and i have to print it only if thereis a change in data from 0 to 1. if i use if-loop , each as much time there is 0 or 1 is there that much time the data gets printed. i dont know how to do this program please help me if anybody knows the answer

    I have attatched the vi.  Here in this it receives the data from rs232 as string and converted into binery. and indicated in led also normally if the data 1 comes then the led's will be off.  suppose if 0 comes the corresponding data status is wrtten into the text file.  But here the problem is the same data will be printed many number of times.  so i have to make it like if there is a transition from 1 to o then only print it once.  how to do it.  I am doing this from few weeks please reply if you know the answer immediatly
    thanking you 
    Attachments:
    MOTORTESTJIG.vi ‏729 KB

  • Updated to Adobe Muse 2014 this morning and have worked in it for the last 8 hours. Now when I try to publish the updated site to Business Catalyst for my client to preview it crashes everytime. I have tried just publishing altered files only, then tried

    Updated to Adobe Muse 2014 this morning and have worked in it for the last 8 hours. Now when I try to publish the updated site to Business Catalyst for my client to preview it crashes everytime. I have tried just publishing altered files only, then tried the whole site again, and then tried publishing as a new site altogether. Thought I would then try to export as HTML in the hope of uploading the files via an FTP client and Muse crashes and locks up again. I am extremely stressed about this as I am in the last few days of of website I have been working on now with no issues since December. We are due to go live and my client needs to see it. I am desperate for an answer. It is not looking good. I am on an Apple Mac and have not had any isses publishing it for the last 6 months. Not very happy to say the least. Need desperate help.

    Hi Zak, I got onto Adobe Customer Care Live Chat this morning and gave them the error message. After some trouble shooting with them it appears the older archived file of the site still publishes. I have now reverted back to the old file and copied and pasted out of the new file and from some ideas given to me by support I am now able to publish to Business Catalyst. It seems there was something corrupt within the new pages added yesterday. I have no idea if this would have still happened if I hadn't updated but I am glad it wasn't a Muse specific problem. I am loving using Muse and the support from Adobe has been excellent. Thanks everyone. By the way I do love the new version and apart from this hick up that lost me a few hours, aged me some more and gave me grey hair I really love Muse. Thanks again.

  • How to open a pdf file only in one computer

    I would like to sell pdf publications by allowing  the user to open them only in one computer. I learnt that this has been done  the past when I bought  some publications but I don't know the way to do it. Could you help me?
    thank you
    Marco

    thank you for your support
    Best Regards
    Marco
    Da:     Mylenium <[email protected]>
    Per:    MARCO1 <[email protected]>,
    Data:   09/10/2013 11:09
    Oggetto:        How to open a pdf
    file only in one computer
    Re: How to open a pdf file only in one computer
    created by Mylenium in Downloading, Installing, Setting Up - View the full
    discussion
    You will havwe to sign up for some service that supports rights
    management, use protected PDFs via LiveCyle/ Acrobat Connect or learn how
    to create your own ePub stuff using Digital Publishing Suite. In any case,
    it will probably cost you money upfront before you make any revenue.
    Mylenium
    Please note that the Adobe Forums do not accept email attachments. If you
    want to embed a screen image in your message please visit the thread in
    the forum to embed the image at
    http://forums.adobe.com/message/5746873#5746873
    Replies to this message go to everyone subscribed to this thread, not
    directly to the person who posted the message. To post a reply, either
    reply to this email or visit the message page: [
    http://forums.adobe.com/message/5746873#5746873]
    To unsubscribe from this thread, please visit the message page at [
    http://forums.adobe.com/message/5746873#5746873]. In the Actions box on
    the right, click the Stop Email Notifications link.
    Start a new discussion in Downloading, Installing, Setting Up at Adobe
    Community
    For more information about maintaining your forum email notifications
    please go to http://forums.adobe.com/message/2936746#2936746.
    Il messaggio trasmesso può contenere informazioni di carattere
    confidenziale rivolte esclusivamente al destinatario. Ne è vietato l'uso,
    la diffusione, la distribuzione o la riproduzione da parte di altre
    persone e/o entità diverse da quelle specificate. Nel caso aveste ricevuto
    questo messaggio per errore, siete pregati di segnalarlo immediatamente al
    mittente e cancellare quanto ricevuto.
    This electronic mail transmission may contain confidential information
    addressed only to the person(s) named. Any use, distribution, copying or
    disclosure by any other person and/or entities other than the intended
    recipient is prohibited. If you received this transmission in error,
    please inform the sender immediately and delete the material

  • Panasonic .MOV files only play audio no video in Premiere Elements 11??? Not Working Help

    Panasonic .MOV files only play audio no video in Premiere Elements 11??? Not Working Help

    It all depends on the codec the file uses, Karli.
    What model of camcorder is this video coming from?
    Are you working on a Mac or a PC? Have you got the latest version of Quicktime, per the program requirements? When you started your project, did you select the settings for a DSLR at 720p? This is a vital step since it will activate the components your computer will need to work with many of these types of files.
    BY THE WAY, KARLI--
    PLEASE do not post the same question more than once on this forum! You've already got a thread going with this same question and several responses posted. It's very confusing when you post the same question a second time and start a whole new discussion.

Maybe you are looking for