N200 0678 hangs after installing XP SP2

I have just purchased an N200 and the first thing that had to go was vista. I have installed XP and it installs fine until I install SP2 it reboots and hangs on the windows xp screen. I installed the latest firmware , the machine will boot into safemode and checking the event logs shed no light on the situation.

Satellite U300-111
Is this the driver you tried?
   Realtek Sound Driver for Windows XP, 5.10.0.5413, 04/12/07
   sound-20070828123958.zip
If so, perhaps you installed them in the wrong order. You should install the chipset and then the display driver before the sound.
-Jerry

Similar Messages

CR2008 hangs after upgrade to SP2 when opening a report w/ invalid printer

Hi,
until CR2008 SP1, when I open a report that was formatted for an unknown printer, a messagebox is displayed with that message an I was able to edit the report and/or assign a correct printer to it. After installing SP2 this behaviour is changed in a an "application hang". CR2008 stops responding. When I open that same report in CR2008 SP1 and delete the printer info, the report opens without any problems in CR2008 SP2
THIS I.M.H.O. A SERIOUS BUG!!!!
Regards,
Adri

From the header of this forum:
+Forum: .NET Development - Crystal Reports
This forum is dedicated to topics related to custom application development or deployment with Crystal Reports in .Net. This includes full versions of Crystal Reports as well as those versions of Crystal Reports bundled with Microsoft Visual Studio .Net+
As your query concerns the Crystal Reports Designer, I am moving the thread to the Crystal Reports Design forum.
Ludek

My computer slows down and hangs after installing oracle 10g

My computer just slows down after installing oracle 10g. I have a pentium 4 3ghz with 512 memory (32 mb used by graphics built in card). It slows down and hanged even if I agjusted the swap memory to 800 mb. I have two swap file/page file - in drive c and drive d. I even cannot shut it down because it takes maybe 30 minutes just to see the "shut-off/log-off" screen.

Before starting up Oracle, when you go to the task manager, how much RAM does it show actually free? 512 MB is pretty small to run Oracle in the first place-- Windows and Office can use a fair chunk of RAM themselves, depending on which Office apps you are running. You may also be suprised by the amount of RAM that a web browser, email client, and the various other apps that folks generally install can use.
Justin
Distributed Database Consulting, Inc.
http://www.ddbcinc.com/askDDBC

Lenovo T61 (Product 6458-W2R): explorer.exe hangs after logon - WinXP SP2

+++ english below +++
[german/deutsch]
Wir setzen in unserem Unternehmen mehrere ThinkPad T61 ein. Bei einigen dieser ThinkPad T61 (und nur beim ThinkPad T61!) haben wir inzwischen ein seltsames Phänomen, welches im Laufe der letzten 1-2 Monate auftrat und noch auftritt. Dieses Phänomen trat nicht gleichzeitig auf, sondern nacheinander. Und es tritt willkürlich auf. Der jüngste Fall ist gerade 1 Tag alt. Inzwischen sind 6 ThinkPad T61 davon betroffen.
Alle ThinkPad T61 sind Mitglieder einer Domäne (Windows Server 2003) und durchlaufen ein Loginscript. Das Loginscript beinhaltet Batchbefehle, Kix32 (für das Mappen von Netzwerklaufwerken und Druckern) und Teile der Matrix42 Empirum Management Software (für Softwaredistribution und Inventarisierung). Es werden Gruppenrichtlinien angewendet. Es werden via Matrix42 Empirum automatisch die neuen Patches und Updates seitens Microsoft auf alle Computer verteilt. Alle Computer erhalten eine unbeaufsichtigte/standardisierte Installation via Matrix42 Empirum Management Software (ähnlich einem Image und der unbeaufsichtigten Windows-Installation). Auf allen Rechnern ist Windows XP mit Service Pack 2 installiert. Spezielle Software ist in der Regel nicht drauf, nur Microsoft Office 2003, der aktuelle Acrobat Reader sowie die aktuellen Standardplayer: Windows Media Player, Quicktime Player, RealPlayer, VLC media player. Ggf. noch Nero 7 Standard bzw. Platinum (Spezielle Version). Alle IBM/Lenovo ThinkPad verwenden zusätzlich die IBM/Lenovo-Utilities „ThinkVantage“. Das Phänomen tritt unabhängig davon auf, ob das ThinkPad T61 in einer Dockingstation betrieben wird oder nicht. Es ist auf jedem Computer in der Windows Registrierung eingestellt, dass der Desktop erst geladen wird, wenn das Loginscript durchgelaufen ist.
Nun zur genauen Fehlerbeschreibung:
Manchmal kann es bei einem Kaltstart vorkommen, dass nach der Anmeldung und nach dem Loginscript –während der komplette Desktop und die Startleiste bereits sichtbar sind und noch einige Dienste geladen werden– sich die explorer.exe aufhängt. Die Startleiste lässt sich nicht bedienen. Ebenfalls lassen sich dann auch auf dem Desktop keine Symbole doppelklicken.
Wir setzen auch andere Computer ein, wo dieses Phänomen nicht auftritt, u.a.:
- HP-Computer (Desktops, Evo SFF Series)
- Fujitsu-Siemens-Computer (Desktops, ESPRIMO E Series)
- IBM ThinkPad T20/21
- IBM ThinkPad T40/T41/T42
- IBM/Lenovo ThinkPad T60
Das Problem tritt nur auf den noch relativ neuen ThinkPad T61 auf.
Wir haben bereits einen ziemlich ähnlichen Fall unter…
http://forums.techarena.in/showthread.php?t=694888&page=1
http://forums.techarena.in/showthread.php?t=694888&page=2
http://www.experts-exchange.com/OS/Microsoft_Operating_Systems/Windows/XP/Q_22718276.html …gefunden.
[english]
Unfortunately, I’m not fluent in the english language.
We use a few ThinkPad T61’s in our company. Meanwhile, at some ThinkPad T61’s (only ThinkPad T61!) we have a strange problem. This problem appears since the last 1-2 months and it still does exist. This problem does not appear at the same time, it does appear successive. And it appears random. The last case is 1 day old. Meanwhile, 6 ThinkPad T61 are concerned.
All ThinkPad T61 are members of a domain (Windows Server 2003) and do execute a logon script. The logon script contains Batch commands, Kix32 (for mapping network drives and printers) and parts of the Matrix42 Empirum Management software (for software distribution and inventory scan). Group policies will apply. Patches and updates will install on every computer via Matrix42 Empirum automatically. All computers get a default/unattended installation via Matrix42 Empirum Management software (everywhere between an image and an unattended Windows installation). All computers have installed Windows XP with Service Pack 2. As a rule, special software isn’t installed, only Microsoft Office 2003, the actual Acrobat Reader and the actual default players: Windows Media Player, Quicktime Player, RealPlayer, VLC media player. Sometimes, there is installed the Nero 7 Standard or rather Platinum (Special Edition) yet. All IBM/Lenovo ThinkPad use IBM/Lenovo-Utilities „ThinkVantage“ additionally. The problem exists if the ThinkPad T61 is connected to a docking station and also if the ThinkPad T61 is disconnected from a docking station. On every computer exists a registry key which arranges it that the desktop only will be loaded after the logon script did run.
Now the detailed error description:
Sometimes the explorer.exe hangs after the cold start. i.e.: The desktop (with icons and task bar) appears complete. But the computer hangs if you try to click on the task bar or double click on any icons. The computer will only run if we kill the process ‘explorer.exe’ and if we restart the explorer.exe.
We use also other computers with the same installation and the same group policies where the problem does not exist, for example:
- HP-Computer (Desktops, Evo SFF Series)
- Fujitsu-Siemens-Computer (Desktops, ESPRIMO E Series)
- IBM ThinkPad T20/21
- IBM ThinkPad T40/T41/T42
- IBM/Lenovo ThinkPad T60
Only the new ThinkPad T61’s have this problem.
We have found a similar case at…
http://forums.techarena.in/showthread.php?t=694888&page=1
http://forums.techarena.in/showthread.php?t=694888&page=2
http://www.experts-exchange.com/OS/Microsoft_Operating_Systems/Windows/XP/Q_22718276.html
Vielen Dank / Many thanks!

I would run System Update and make sure I had all the updates available.
Another thing to try is:
1. Right-click on My Computer and click Properties
2. Click on the Advanced tab
3. Click on Settings under Performance
4. Click on Data Execution Prevention
5. Click on Turn on DEP for all programs and services except those I select, then check Windows Explorer
We had to do that to some machines here after a push from corporate of the new ScriptLogic.This solved the problem.
ThinkPad T61 15 Widescreen with nVidia Quadro graphics 6459CTO
Windows 7 Enterprise and Windows XP Pro

DW CS3 preview issue after installing Vista SP2

I have DW CS3 installed on my desktop and laptop computers. One computer uses vista64 and the other vista32. After installing vista service pack 2, I now have the following issue previewing PHP pages under Apache: All browsers give me a "cannot display the webpage" error UNLESS I am connected to some kind of network--it could be the internet or my peer-to-peer network. My destop computer is attached to a printer via RJ45 cable. If the printer is turned on, I can preview webpages in DW. If the printer is turned off, I cannot! Or, if I am connected to the internet through my wireless internet card, I can preview pages, otherwise, not.
Previous to installing SP2, I was able to preview pages on both computers without the need to be connected to a network, so I am pretty sure that SP2 is involved in this new issue.
When Apache and MySQL start up in the XAMPP control panel, there are no errors, and I can go into PHPMyAdmin just fine.
Has anyone else run into this? Any thoughts?

I'm just following up here. I have not solved the issue, but I did figure out that the problem isn't with vista service pack 2 but with Kaspersky anti-virus 2009.

Safari 5 hanging after install...

Our internet started hanging and took forever to load pages after installing safari 5.0. We took it into Geek squad, they checked it out and said it was a software problem not a hardware problem and told us to reinstall the operating system. We did and everything worked fine (until we did the updates that included safari 5.0) then same problem again. Slow page loading...so We reinstalled the operating system without doing safari 5.0 update (currently running safari 4.02) and internet is fine but we cannot log onto the iTunes store because it says that we need safari 4.03 or higher. Tried to download safari 4.05 but it said that I could not install because I do not have Mac OS X 10.6!! So does having Mac OS X 10.6 keep you from having hang up issues with Safari 5.0?

HI and welcome to Apple Discussions...
First, right or control click the Safari icon in the Applications folder then click "Get Info". That should tell you exactly which version of Safari you have installed.
Check to see if you have third party Safari plug-ins or input managers installed. Go here for trouble shooting 3rd party plugins or input managers which might be causing the problem. Safari: Add-ons may cause Safari to unexpectedly quit or have performance issues
Install the v10.5.8 Combo Update This includes updates that were not part of the original v10.5.8 update.
Go to the Safari Menu Bar, click Safari/Preferences. Make note of all the preferences under each tab. Quit Safari. Now go to ~/Library/Preferences and move this file com.apple.safari.plist to the Desktop.
Relaunch Safari and see if that makes a difference. If not, move the .plist file back to the Preferences folder. If Safari functions as it should, move that .plist file to the Trash.
And repair permissions.
Launch Disk Utility. (Applications/Utilities) Select MacintoshHD in the panel on the left, select the FirstAid tab. Click: Repair Disk Permissions. When it's finished from the Menu Bar, Quit Disk Utility and restart your Mac. If you see a long list of "messages" in the permissions window, it's ok. That can be ignored. As long as you see, "Permissions Repair Complete" when it's finished... you're done. Quit Disk Utility and restart your Mac.
One more thing. Open System Preferences/Accounts the select the Login Items tab. If you have any apps listed there to launch when you startup your Mac, delete them. And go to /Library/Startup Items. Remove any items there also.
Carolyn

Thunderbird hangs after installing Lightning

Operating system is Windows 7 64-bit. Thunderbird version is 31.3.0. Add-ons installed are Google Tasks Sync 0.5.1, Lightning 3.3.1 and Provider for Google Calendar 1.0.3. After installing the latter two extensions, Thunderbird opens but then immediately hangs up. Using safe mode, I have been able to launch Thunderbird and use email with the extensions disabled. Would appreciate your help.

I tried with another slot (pci 3 slot), same issue. I try to assign a irq 0 to pci slot 4 which shared by usb host controller and other usb root hub. I tried with different irq also (irq ) which shared by my geforce, audigy and another i don't remember.
IRQ available for slot 4 or all is irq 9, irq 0, irq . onboard soundcard disabled. Default xp driver installed previously for creative onboard soundcard.
I didn't try the new drivers provided on creative website. i going to do that today and post again the results.
Many posting the similar problems in this forum, is there any defined document or knowledgebase which clearly give some directions to follow to fix the issue.
Thanks in advance
Jayakumar

CSM 3.3.1 - deployment bug? after installing SP1&SP2

Hi all,
I've recently installed CSM 3.3.1 with SP1 and SP2 and I've encountered quite serious (for me) problem. Has anyone met strange situations after installing service packs?
When I discover new device (i.e. router with 15.1 ios version) and make changes in ZBF policy, CSM deploys new configuration and everything seems to be fine. I must stress that only seems.
When for example I want to make only small changes to that device (by adding new username ans password) I make "preview configuration" and I see that CSM deletes part of ZBF policy - 10 of 12 zone-pair. For example for some reasons manager makes "no service-policy ...." in zone-pair. When I do another "preview configuration" (after adding another username) it deletes those empty zone-pairs. I thoung maybe naming doesn't suit it and I need to recreate all policy through CSM - nooooo. It did not help. Still it tried to delete some of policy.
Even when I created all ZBF policies from CSM Ive got situation when in one preview config it removes security-policy from zone-pair and after deployment in second preview it adds these security-policies to previous zone-pair. Its happaning in a loop.
Or another strange behaviour is when I add new username it does sth like this:
In "preview configuration" there is
policy-map type inspect CSM_ZBF_POLICY_MAP_1
no class class-default
class class-default
drop
while in GUI in CSM there is action inspect defined.
I've looked through bugtool, but with no success, so need any help.
regards

hi,
thx for interest,
I didn't open the TAC case casue I didn't have much time for it, however the issue is resolved. It occured that SP2 to CSM was problematic. Right now I've got 3.3.1 version with SP1 and everything works just fine. To make sure that it was it, I installed then SP2 and the problem started again.
I don't have configuration saved but actually there wasn't much of it. It was a fresh system and only 1 or 2 devices ware added so I suppose it should be easy to restore the situation.
if you got any new info please let me know
regards
Przemek

Multiple Safari hangs after installing Snow Leopard

I had 5 Safari hangs today within hours...never had one since I bought the machine in June 2009 with Leopard installed...Since the SL upgrade CD, I have had 2 system freezes that result in a complete shutdown to clear and multiple Safari hangs that I able to recover with a force quit..My daughter in college with the same machine reported that she had 3 system freezes in one day since SL...My wife who did NOT yet install the SL upgrade and is now blissfully having no problems at all and does not want to install the new OS (again same machine type, We bought 3of them in June after the announcement). I hope that this gets debugged and fixes provided...

Hi,
Mac OS X 10.5: What you can do if Safari quits unexpectedly
That links is for 10.5 but the trouble shooting will work in 10.6 also.
For system freezes try maintenance.
Maintaining Mac OS X
On the Macs you upgraded to SL, did you check to see if you had 3rd party software installed that might not be compatible? http://support.apple.com/kb/HT3258
Did you repair permissions after the upgrade?
Quit any open applications/programs. Launch Disk Utility. (Applications/Utilities) Select MacintoshHD in the panel on the left, select the FirstAid tab. Click: Repair Disk Permissions. When it's finished from the Menu Bar, Quit Disk Utility and restart your Mac. If you see a long list of "messages" in the permissions window, it's ok. That can be ignored. As long as you see, "Permissions Repair Complete" when it's finished... you're done. Quit Disk Utility and restart your Mac.
Carolyn

My MAC Book Pro is hanging after installing Lion OS

Hi
i have recently installed OS X Lion from the apple store and after the installation is commpleted my MAC started to hang and give a black screen with no responce what so ever.
the only thing i can do is keep pressing the power button until it gose off and then turn it back on.
i get a msg on the screen after it boots saying the you computer was shultdown becouse of an error and it asks me to report to Apple i have done this twise with no use
please advice this is my first MAC.... so im new in this game
thank you

How much free space do you have on your system drive?
Allan

No sound after installing XP-sp2 on U300

Hellllo I'm newbie...... I have a u300 laptop. I changed my OS to XP. I completelly format drives and then I install new XP-sp2. After that I downloaded all the appropriate drivers from the toshiba website. All the hardware perfectly works except sound. I just search the toshiba forum and others have these problem tooo. As per the thechs I download the patch(microsoft ) but no use... please help me by giving a good answer quickly regards--- achu

Satellite U300-111
Is this the driver you tried?
   Realtek Sound Driver for Windows XP, 5.10.0.5413, 04/12/07
   sound-20070828123958.zip
If so, perhaps you installed them in the wrong order. You should install the chipset and then the display driver before the sound.
-Jerry

Pacman hangs after install or remove

For a few weeks I am experiencing a strange problem with pacman.
After a package is installed or removed it just hangs instead of closing.
In the task manager I can see ldconfig running and uninterruptible.
Maybe this has something to do with it?
I tried reinstallingen several packages like pacman en libc but had no luck.
Can someone help me with this?

For a few weeks I am experiencing a strange problem with pacman.
After a package is installed or removed it just hangs instead of closing.
In the task manager I can see ldconfig running and uninterruptible.
Maybe this has something to do with it?
I tried reinstallingen several packages like pacman en libc but had no luck.
Can someone help me with this?

Hanging after installing avast andspy doctor did all the troubleshooting

I have updated Firefox and all plug-ins. Installed Avast and spy doctor now having all sorts of hang ups. did all the troubleshooting to no avail.

johnodd4, I appreciate your time and thanks for responding.
I'm so frustrated as I'm dealing with multiple issues here.
Here's the RAM purchased:
512MB Apple iMac/iBook/PowerBook PC133 1" SDRAM SODIMM (p/n MX-M8631G/A) $89.98
I'm concerned that the RAM received doesn't look like the RAM module advertised and when I google the SKU number I'm taken to an ASUS notebook page on MemoryTens own website. So I don't even know if the wrong RAM was accidentally sent out.
MemoryTen Support ask me to check the RAM is seated properly. Well it was and installing that new RAM has caused to iBook to display the Flashing Folder/?.
The iBook still failed to boot when I replaced the original Apple Ram module AND when I removed that and tried booting with just the onboard 64mb RAM, the boot process didn't proceed past the Flashing Folder/?.
So ... the RAM is going back to MemX BUT I still have this iBook that was working perfectly before but now is very very sick!
I have zeroed the HD using Disc Utility/Target Disc Mode and when I place the Panther disc in the tray and hold the Option key at startup, then select the Panther Disc and click on the forward arrow ... it just hangs for hours (actually I gave up after 3hrs).
I have to reset the PMU everytime I want to boot up and try something new.
I've been frantically researching this and I only have the Panther disc (Retail Version) which was bought recently and used to successfully upgrade to OS from 9.2.2 to 10.3.9 (and I did apply the 4.1.7 Firmware Upgrade)
Message was edited by: Spawn_Dl3y

My Mac Pro is hanging after installing Mountain Lion

My Mac Pro is hanging and it started not long after I installed Mountain Lion. It seems to be related to Contacts in that it is constantly trying to sync with iCloud. It becomes unresponsive and when I force quit, other apps start going down. Eventually Mail hangs and I have to hit the power button and force a restart of the Mac Pro. It also brings down my DSL connection which runs through an Airport Extreme. Has anybody had similar experiences? Contrary to what it might say in my profile, I'm running a 2.8 Ghz Quad Core Mac Pro and 10.8.2.

Welcome. If you search for "Mountain Lion freeze" you will see you are NOT alone. But as far as I know there is no solution.

PowerBook G4 hangs after install/reboot with Combo Mac OS X 10.5.8 update

I've got a Titanium PowerBook G4 1GHz. It had Mac OS X 10.5.4 installed.
Then I went to Software Update and it downloaded the Combo software 10.5.4 and after it rebooted, it is stuck at "Installing 2 items, Configuring installation."
You can see the progress bar pulsating but it's stuck and I dont hear any hard drive activity. I had to hard power down and got back in and did Software Update again and after it rebooted, same issue.
Whats up with that?

Some general advice on updating Leopard:
It is worth noting that it is an extreme rarity for updates to cause upsets to your system, as they have all been extensively beta-tested, but they may well reveal pre-existing ones, particularly those of which you may have been unaware. If you are actually aware of any glitches, make sure they are fixed before proceeding further.
So before you do anything else:
If you can, make a full backup first to an external hard disk. Ideally you should always have a bootable clone of your system that enables you to revert to the previous pre-update state.
Turn off sleep mode for both screen and hard disk.
Disconnect all peripherals except your keyboard and mouse.
1. Repair Permissions (in Disk Utility)
2. Verify the state of your hard disk using Disk Utility. If any faults are reported, restart from your install disk (holding down the C key), go to Disk Utility, and repair your startup disk. Restart again to get back to your startup disk.
At least you can now be reasonably certain that your system does not contain any obvious faults that might cause an update/upgrade to fail.
3. Download the correct version of the COMBO update from the Apple download site.
The Combo updater of Leopard 10.5.8 can be found here:
http://support.apple.com/downloads/Mac_OS_X_10_5_8_Combo_Update
If you prefer to download updates via Software Update in the Apple menu (which would ensure that the correct version for your Mac was being downloaded), it is not recommended to allow SU to install major (or even minor) updates automatically. Set Software Update to just download the updater without immediately installing it. There is always the possibility that the combined download and install (which can be a lengthy process) might be interrupted by a power outage or your cat walking across the keyboard, and an interrupted install will almost certainly cause havoc. Once it is downloaded, you can install at a time that suits you. You should make a backup copy of the updater on a CD in case you ever need a reinstall.
Full details about the 10.5.8 update here: http://support.apple.com/kb/HT3606
More information on using Software Updater here:
http://support.apple.com/kb/TA24901?viewlocale=en_US
Using the Combo updater ensures that all system files changed since the original 10.5.0 are included, and any that may have been missed out or subsequently damaged will be repaired. The Delta updater, although a temptingly smaller download, only takes you from the previous version to the new one, i.e. for example from 10.5.7 to 10.5.8. Software Update will generally download the Delta updater only. The preferable Combo updater needs to be downloaded from Apple's download site.
Now proceed as follows:
4. Close all applications and turn off energy saving and screensaver.
5. Unplug all peripherals except your keyboard and mouse.
6. Install the update/upgrade. Do not under any circumstances interrupt this procedure. Do not do anything else on your computer while it is installing. Be patient.
7. When it ask for a restart to complete the installation, click restart. This can take longer than normal, there are probably thousands of files to overwrite and place in the correct location. Do nothing while this is going on.
8. Once your Mac is awake, repair permissions again, and you should be good to go!
If your Mac seems slightly sluggish or ‘different’, perform a second restart. It can’t hurt and is sometimes efficacious! In fact a second restart can be recommended.
9. Open a few of your most used applications and check that all is OK. In this connection please remember that not all manufacturers of third party applications and plug-ins, add-ons, haxies etc, will have had time to do any necessary rewrites to their software to make them compliant with the latest version of your operating system. Give them a week or two while you regularly check their websites for updates.
N.B. Do not attempt to install two different updates at the same time as each may have different routines and requirements. Follow the above recommendations for each update in turn.
Lastly, Apple's own article on the subject of Software Update may also be useful reading:
http://docs.info.apple.com/article.html?artnum=106695
[b]If you are updating Safari (or just have):[/b]
Input Managers from third parties can do as much harm as good. They use a security loophole to reach right into your applications' code and change that code as the application starts up. If you have installed an OS update and Safari is crashing, the very [i]first[/i] thing to do is clear out your InputManagers folders (both in your own Library and in the top-level /Library), log out and log back in, and try again.
So, disable all third party add-ons before updating Safari, as they may not have been updated yet for the new version. Add them back one by one. If something goes awry, remove it again and check on the software manufacturer's website for news of an update to match your version of Safari.
Most errors reported here after an update are due to an unrepaired or undetected inherent fault in the system, and/or a third party add-on.
Additional tips on software installation here:
http://docs.info.apple.com/article.html?artnum=106692
To reiterate, Input Managers reach right into an application and alter its code. This puts the behavior of the affected application outside the control and responsibility of its developers: a recipe for problems. That's not to say that issues absolutely will ensue as a result of Input Managers, but you, as a user, must decide. If the functionality of a specific Input Manager or set thereof is really important to you, you may well choose to assume the associated risk.
Again, the advice is to remove all Input Managers from the following directories:
/Library/InputManagers
~/Library/InputManagers
especially prior to system updates (they can always be added back one-by-one later).
Solutions for troubleshooting installation, startup, and login issues in Mac OS X v10.5
http://support.apple.com/kb/TS1541?viewlocale=en_US

N200 0678 hangs after installing XP SP2

Similar Messages

Maybe you are looking for