N73ME Memory full delete some data

Memory full delete some data...every...time. . try this..
switch off the mobile phone then. . .Remove the memory card. . . Keep it switched off for a while and then. . .switch it on. . .again. . .For more help reply. . .sk
Sadath khan
Attachments:
sk.JPG ‏123 KB

do you have some apps installed on the phone memory istelf. there are some apps that will only install on the phone and not the memory card. is your firmware up to date? did you add anything new, try also removing some of the messages from the memory card and all the folders, send, inbox, outbox if applicable and see if this will make any difference.
You know what I love about you the most, the fact that you are not me ! In love with technology and all that it can offer. Join me in discovery....

Similar Messages

Sending failed memory is full delete some data bef...

Good Day
i have N900 and i'm facing a problem when i start any conversation i can send 1 msg then receive 1 the second i want to send the phone reflects with error msg
(sending failed memory is full delete some data before send or receive)
altho i have 26 gb free and i updated the phone to the latest version can any1 assist me with this

It could be a few things.. Try this on your phone..
Open this link on your phone
http://chris.intrepid.cx/N900/debug2.sh
Choose to save this file. Save it in the documents folder on your phone
Now, open an x terminal and type in this command exactly
sh MyDocs/.documents/debug2.sh
It will take a LONG time to finish.. but when it stops, connect your phone to your PC and browse the storage.. you'll find a file called debug2.txt.. Drop that in an email to me (check you personal messages for my email address) and I'll have a look

9300i Memory Full - Delete some files - Memory Ful...

I had trouble with my 9300i, it started saying "Memory Full" and told me to delete some files. The problem was, I tried to delete files, but the phone couldn't do it, because the memory was full... I couldn't do anything.
The Control panel's "Memory" said I had 500 Kb of messages, 500 Kb of calendar, and 79 megabytes of "Other file types".
The File manager did not show me anything other than "My own files" and the folders were empty.
I couldn't find any help from Nokia sites. A friend adviced me to make a Full backup on a MMC card, transfer it to PC and delete a certain file: Mail/index. That's what I did, then I resetted the phone to factory settings and transferred the Full backup back to phone.
This helped and my phone was once again operational. However, all my messages were gone, and I had to save the email settings from scratch, so beware, if you need to do the same.
So how can the memory fill 100% if I use the "Delete sent messages after X days" and keep deleting the new ones?! What is this "index", and why is there no clever way to make it smaller...
Message Edited by falcontemp on 21-Apr-2008 09:19 PM

For next time, look in your E-Mail inbox and Sent items; mine was full of picture attachments - cleared down a few MB just in there.
Mobile Phone Review and Tips

3230, memory low. delete some data... but its not?...

OK so I'm a bit embarrassed to post this as at first glance it might appear to be a bit of a beginners question but for some reason i cannot re-install yahoo go. i discovered that the messenger shortcut had vanished from the phone so i decided to delete the yahoo go app and re-install it. but i just get the above message every time. i have deleted everything yahoo related plus a couple of other files but still nothing. I've even formated a spare memory card but still i cannot re-install the app.
the memory card is 256 MB with 50MB free
the phones memory (c drive) 1869 KB
the yahoo go app is 1.754MB
as i only store contact details (about 200) on the phone, i cannot work out why its memory is so low but as I'm trying to put the yahoo app back on the memory card surely this shouldn't affect anything? i have used fexplorer to try find whats going on and I've compressed the memory but no joy.
can anyone help??
cheers
Rich
Nexu 5

Hello,
I'm having this same problem... But innitialy the phone does not have the Memory Card. I install a new one (128MB) and the message still appears.
I have deleted all messages, all contacts, all files, everything that I was able to delete, and the message still appears!!!
How can I RESET the phone to its default, or fix this problem?
Thank you in advance
EBC Avaya Brazil

Memory Full del. some data.

The mentioned problem faced oftn, after received any call, or dialing not seen in the log. no massages received or saved only massage alert blinking. how can i solve my problem, my nakia model is N72.

If the phone is unusable then unfortunately the only options you have are a hard reset or a trip to a nokia care point. Both will result in the total loss of all data and content that you have added to the phone.
Hard reset:
1. Switch off the phone.
2. Hold down the following three buttons: Green (the call answer button), * button, and '3' button.
3. While holding these buttons, hold the power button for a second to switch on the phone.
4. Release when the phone shows the nokia hands logo or shows other signs of life like the language selection screen.
It may take a few attempts and very flexible fingers.
Care points/service centres and repair info:
UK • Europe • Asia-Pacific • USA •
Canada • Middle East and Africa
Elsewhere: Click here, select your country, go to the support section, then select repair.

N82: Memory full. Delete some data from phone memo...

memory full. delete some data from phone memory
i deleted all of the messages in inbox and in memory card. i also tried *#7370#. stil the memory is full. i check the phone memory status everytime i delete the messages and it will show available memory for about 30kb. when i restart the phone and check the phone memory, it will indicate that it has 0 kb left. i didn't installed any application in it.
Message Edited by katnix on 13-Jul-2008 01:39 PM

proper advice???? that's the advice i gave, take it or leave it. it's not for you tell me what's proper or not.
i don't remember seeing your name in the thread above, and i don't remember you TELLING me before that you don't want to format.
now just not to go into alot of words. there is a better way you can use to talk to people. because we are trying to help. if you like what we suggest, fine, if not, wait for another suggestion or come with one yourself.
if you have a registery cleaner or a temp file cleaner for symbian , please be so kind to offer it's name here.
Fear not those who argue but those who dodge

Memory Full. Delete some data

I am trying to delete some data because of the message I get when switching on my Nokia 3230.
The message says : "Home Screen: Memory insufficient. Delete some data first"
However, I cannot access the MENU/File Manager/Options by pressing the Menu key.
Any ideas?! Many thanks.
Ianor
Solved!
Go to Solution.

If the phone is unusable then unfortunately the only options you have are a hard reset or a trip to a nokia care point. Both will result in the total loss of all data and content that you have added to the phone.
Hard reset:
1. Switch off the phone.
2. Hold down the following three buttons: Green (the call answer button), * button, and '3' button.
3. While holding these buttons, hold the power button for a second to switch on the phone.
4. Release when the phone shows the nokia hands logo or shows other signs of life like the language selection screen.
It may take a few attempts and very flexible fingers.
Care points/service centres and repair info:
UK • Europe • Asia-Pacific • USA •
Canada • Middle East and Africa
Elsewhere: Click here, select your country, go to the support section, then select repair.

N70 - Not Enough Memory Delete some data first

Hi,
Could someone please help with a problem that i am having with N70. Messages Empty(All Folders) and no images or media files on the phone memory, al applications also are on the Memory card(1GB and 3/4th of it is free). But still i am getting this message of "Not Enough Memory to eprform the Operation. Delete some data first". Could someone please advise what i could do to resolve this, as now i do not have any log of Calls(missed, rec, dialled), no incoming messages etc.
Thanks in advance.
Regards,
Powi

first upgrade your phone software with the latest available version that you can check here:
http://europe.nokia.com/A4577224
if you have the latest software version,reset your phone by pressing *#7370# in standby mode(after backing up)
NOKIA means:Night Of King In Alone

For the last month or so my icloud won't back up, it keeps telling me that there is too much storage and I need to delete some data. But I have deleted between 3-400 photos and it is still saying the same, can anyone please help

For the last month or so my icloud won't back up, it keeps telling me that there is too much storage and I need to delete some data. But I have deleted between 3-400 photos and it is still saying the same, can anyone please help

If they were deleted from your camera roll that should have resulted in a corresponding decrease in the estimated size of your next backup.
If it's still saying that you don't have enough storage to back up, read through this article: http://support.apple.com/kb/ht4847. It provides some suggestions for reducing your iCloud storage, such as deleting unneeded email.
The other area to look at is your text messages. These are included in the backup. If you have lots of photos and videos attached to your messages, that can significantly increase the size of your backup. If that's the case, deleting these may make a big difference.

How to delete some date in target table at a mapping?

How to delete some date in target table at a mapping?
I extract date from source tabel into target table,
but before extract date I want to delete some date from target?
how to do?

Just to change a bit of terminology in the reply, within the mapping, click on operator properties and choose TRUNCATE/INSERT.
Note that truncate is dependent on constraints, so you probably must disable those before doing this. You can of course do DELETE/INSERT...
Jean-Pierre

HT4847 On startup my macbookair says start up disk full/delete some files. When I look at storage disk utility I see 51GB of a possible 60GB is used with Other. What is Other? and how can I view and delete some of these files?

On startup my macbookair says start up disk full/delete some files. When I look at storage disk utility I see 51GB of a possible 60GB is used with Other. What is Other? and how can I view and delete some of these files?

A MacBook will use Time Machine to make local backups so that when connected to an external drive it will backup a lot faster.
to disable this, you must use a command under terminal.
to locate terminal, do a search for it under spotlight (the magnifying glass on the top right corner), should be the first hit.
once under terminal, type the following text exactly:
sudo tmutil disablelocal
hit enter.
you will be asked to input your password, if you do not have a password, you will have to create one before performing this command. after entering your password, hit enter again and close terminal.
in a few minutes the space taken up by time machine should be cleared.

How to reduce the size of file after delete some datas?

The size of the database file isn't smaller than ago after delete some data from database.
How to reduce the size of file after delete some datas?

Hi,
What BDB release are you using? If it's one of the latest releases, then what you are looking for is the DB->compact() method:
http://download.oracle.com/docs/cd/E17076_01/html/api_reference/C/dbcompact.html
The DB->compact() method compacts Btree, Hash, and Recno access method databases, and optionally returns unused Btree, Hash or Recno database pages to the underlying filesystem. Please let me know if it helps.
Bogdan Coman

E6 Problem , Calendar: Memory full .close some app...

hi all , from few days i am facing this problem when i open my Calendar : memory full.close some applications and try again ,
and in the phone back ground there are no open application , i restart my phone many times and same problems
i update my phone firmware to the new firmware update Symbian Anna 025.007
and same problem exist , what to do?
i need an urgent reply because this is my Business phone and some many meetings in my Calendar
thanks in advance
Solved!
Go to Solution.

Software or even hard reset perhaps is the only way for a quick solution/fix, but first back up using for example Outlook using Nokia Suite or Funambol.
Not a nice problem you having here.
PS Are you using the phone to connect to a server with the built in file manager or do you use for example Whats Up DS
Nokia 808 again (delight Belle), Nokia E7 and X7 ( again, all on Delight Belle...after some time on Nokia Lumia 925 (retired), 1020 (not that great)and Lumia 820 (Replaced my router at home, great for internet sharing).., N9 The best device ever (use it as much as Lumia 1020), Nokia 700 (Sport Phone/My Love :-) ) Nokia 701, Nokia E6 (Should have a follow-up from Nokia among with larger screen, NFC, Autofocus), Lumia 800 (Retired After 6 weeks), -Sports Tracker-Nokia Internet Radio-Handy Safe-Skype-Bambuser-Screenshot app pro-fMobi-ComingNext-Manual TaskSwitcher-jagiTimer-Easy StopWatch-Boldbeast-Equalizer-Financial Calculator-WiMP Music-YTasks-Davi-Thumbnail Folders-BizCalendar-Tiny7-Situations-nn reeder-Sport Timer-CameraLover-CameraPro-GrabRadio-LiveScore-Poddi-Gravity-SkyFilesPro

LabVIEW Memory full while fetching data from database

Hi,
In my program I need to sync some data from client PC as per the selected time frame.
But while fecthing the data from the clinet database, my application is hanging and when I run it with code I get the 'LabVIEW memory full' error message.
Kindly suggest to overcome this problem.

Fetching the entire database is probably not a good idea. You should narrow down how much you read at a time.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

'Startup disk full- delete some" - need tips.

suddenly things going a little slower and i gets this warning atout Startup disk too full - nneed to delete some'.
Basic Q#!: er, uh, what exactly is the startup disk.
& how can i know what i should be deleting.
I would appreciate any good tips.
thank you tooo.

Hi theInukus!
Insufficient available space, can cause performance issues, system corruption, and possible loss of data.
Depending on Mac system usage habits, it is a general recommendation, to keep 10% to as much as 20%, of the Total capacity, available at all times.
Review the suggestions, in the documents that I have linked to below.
Authored by Dr Smoke:
Problems From Insufficient RAM And Free Hard Disk Space
Freeing Space On Your Mac OS X Startup Disk
Have you ever run any routine Maintenance procedures, as suggested in the articles linked to below?
Mac OS X 10.3/10.4: System Maintenance, authored by Gulliver
Maintaining Mac OS X, authored by Dr Smoke
Is the Mac shutdown overnight, or does it run 24/7?
If you turn the Mac off nightly, the Background Maintenance Tasks, are never run.
These can also be run, using a Third-Party utility, or manually using Terminal, to run the CRON Commands.
I use MacJanitor, when necessary.
INSTRUCTIONS TO RUN CRON MANUAL COMMANDS
Quit all applications/programs.
Navigate to HD > Applications > Utilities.
Double click on Terminal, to open.
At the prompt, type:
sudo periodic daily
Press Return.
Enter your Admin password when prompted, then press Return.
This will execute the daily script that is sheduled to run every night.
When completed, repeat this procedure, but change the command to:
sudo periodic weekly
This one rebuilds a database or two, and usually takes somewhat longer to complete. It is scheduled to run once a week.
Repeat again, with command:
sudo periodic monthly
Or they can all be run in one pass, which is preferable, with this command:
sudo periodic daily weekly monthly
When the tasks complete, and return to the prompt, you may quit Terminal.
Restart the Mac, and run Repair Permissions.
TO REPAIR PERMISSIONS ON THE STARTUP DISK
1.Open Disk Utility, located in Applications/Utilities, and select the startup disk in the left column.
2.Click First Aid.
3.Click Verify Disk Permissions to test permissions or Repair Disk Permissions to test and repair permissions. (I never "Verify". Just run "Repair".)
Rerun RP, until the only messages reported, are listed in one of the articles linked to below.
Spurious Permissions Errors Using: 10.2.x, authored by Michael Conniff.
Spurious Permissions Errors Using: 10.3.x, authored by Michael Conniff.
Spurious Permissions Errors Using: 10.4.x, authored by Michael Conniff.
When "Repair Permissions" is complete. Quit "Disk Utility".
ali b

N73ME Memory full delete some data

Similar Messages

Maybe you are looking for